protected override void InvokeInternal(CommandProcessorContext cpc)
{
DesignerInfo designerInfo;
Debug.Assert(cpc.Artifact != null, "Artifact was null");
if (Association != null &&
cpc.Artifact != null &&
cpc.Artifact.DesignerInfo() != null &&
cpc.Artifact.DesignerInfo().TryGetDesignerInfo(OptionsDesignerInfo.ElementName, out designerInfo))
{
// APPDB_SCENARIO: We cannot use referential constraints for 0..1:0..1 or 1:1 associations, since these exist as configured
// 0..1:* or 1:* associations and so introducing a referential constraint would cause validation errors.
// Must use Referential Constraint for 1:0..1 relationship as using an AssociationSetMapping results in illegal reference to the same ID column twice (since the PK is also the FK)
if (Association.IsOneToZeroOrOne ||
(UseReferentialConstraint && !(Association.IsZeroOrOneToZeroOrOne || Association.IsOneToOne)))
{
// We're including fk columns, so the update will consist of a ref constraint
var createRefConCommand = new CreateOrUpdateReferentialConstraintCommand(
(c, subCpc) =>
{
var cmd = c as CreateOrUpdateReferentialConstraintCommand;
cmd.PrincipalEnd = PrincipalEnd;
cmd.DependentEnd = DependentEnd;
cmd.PrincipalProperties = PrincipalProperties;
cmd.DependentProperties = DependentProperties;
return(cmd.PrincipalEnd != null && cmd.DependentEnd != null);
});
CommandProcessor.InvokeSingleCommand(cpc, createRefConCommand);
}
else
{
// We're not including fk columns, so the update will consist of an association set mapping and a deletes of the fk columns (if they exist)
// otherwise update AssociationSetMapping appropriately
var createMapCommand = new CreateOrUpdateAssociationSetMappingCommand(
(c, subCpc) =>
{
var cmd = c as CreateOrUpdateAssociationSetMappingCommand;
cmd.Association = Association;
cmd.AssociationSet = AssociationSet;
cmd.EntityContainerMapping = EntityContainerMapping;
cmd.StorageEntitySet = StorageEntitySet;
return(cmd.Association != null && cmd.AssociationSet != null && cmd.EntityContainerMapping != null &&
cmd.StorageEntitySet != null);
});
CommandProcessor.InvokeSingleCommand(cpc, createMapCommand);
// Delete the fk properties in the conceptual layer if they exist. Do not delete primary key properties though!
if (!IncludeFkProperties)
{
var propertiesToDelete =
DependentProperties.Where(p => p.EntityType != null && !p.EntityType.ResolvableKeys.Contains(p)).ToList();
foreach (var p in propertiesToDelete)
{
var deletePropertyCmd = new DeletePropertyCommand(
(c, subCpc) =>
{
var cmd = c as DeletePropertyCommand;
cmd.EFElement = p;
return(cmd.EFElement != null);
});
CommandProcessor.InvokeSingleCommand(cpc, deletePropertyCmd);
}
}
// Add or update the EndProperty elements for the AssociationSetMapping. Try to work out which end is the principal
// end by looking at the multiplicity, since we don't have a referential constraint in this case.
AssociationSetEnd principalSetEnd;
AssociationSetEnd dependentSetEnd;
Debug.Assert(
AssociationSet.AssociationSetEnds().First().Role.Target != null,
"Role Target for Association End was null, AssociationSetMapping update failed");
if (AssociationSet.AssociationSetEnds().First().Role.Target != null)
{
if (Association.End1.Multiplicity.Value == ModelConstants.Multiplicity_Many)
{
principalSetEnd = AssociationSet.AssociationSetEnds().Last();
dependentSetEnd = AssociationSet.AssociationSetEnds().First();
}
else
{
principalSetEnd = AssociationSet.AssociationSetEnds().First();
dependentSetEnd = AssociationSet.AssociationSetEnds().Last();
}
var dependentEndPropertyCmd = new CreateOrUpdateEndPropertyCommand(
(c, subCpc) =>
{
var cmd = c as CreateOrUpdateEndPropertyCommand;
cmd.AssociationSetEnd = dependentSetEnd;
cmd.AssociationSetMapping = createMapCommand.AssociationSetMapping;
cmd.StorageKeyProperties = StorageDependentTypeKeyProperties;
cmd.ConceptualKeyProperties =
ConceptualDependentType.SafeInheritedAndDeclaredProperties.Where(p => p.IsKeyProperty);
return(cmd.AssociationSetEnd != null && cmd.AssociationSetMapping != null);
});
var principalEndPropertyCmd = new CreateOrUpdateEndPropertyCommand(
(c, subCpc) =>
{
var cmd = c as CreateOrUpdateEndPropertyCommand;
cmd.AssociationSetEnd = principalSetEnd;
cmd.AssociationSetMapping = createMapCommand.AssociationSetMapping;
cmd.StorageKeyProperties = StorageDependentTypeForeignKeyProperties;
cmd.ConceptualKeyProperties =
ConceptualPrincipalType.SafeInheritedAndDeclaredProperties.Where(p => p.IsKeyProperty);
return(cmd.AssociationSetEnd != null && cmd.AssociationSetMapping != null);
});
CommandProcessor.InvokeSingleCommand(cpc, dependentEndPropertyCmd);
CommandProcessor.InvokeSingleCommand(cpc, principalEndPropertyCmd);
}
}
}
}
protected override void InvokeInternal(CommandProcessorContext cpc)
{
DesignerInfo designerInfo;
Debug.Assert(cpc.Artifact != null, "Artifact was null");
if (Association != null
&& cpc.Artifact != null
&& cpc.Artifact.DesignerInfo() != null
&& cpc.Artifact.DesignerInfo().TryGetDesignerInfo(OptionsDesignerInfo.ElementName, out designerInfo))
{
// APPDB_SCENARIO: We cannot use referential constraints for 0..1:0..1 or 1:1 associations, since these exist as configured
// 0..1:* or 1:* associations and so introducing a referential constraint would cause validation errors.
// Must use Referential Constraint for 1:0..1 relationship as using an AssociationSetMapping results in illegal reference to the same ID column twice (since the PK is also the FK)
if (Association.IsOneToZeroOrOne
|| (UseReferentialConstraint && !(Association.IsZeroOrOneToZeroOrOne || Association.IsOneToOne)))
{
// We're including fk columns, so the update will consist of a ref constraint
var createRefConCommand = new CreateOrUpdateReferentialConstraintCommand(
(c, subCpc) =>
{
var cmd = c as CreateOrUpdateReferentialConstraintCommand;
cmd.PrincipalEnd = PrincipalEnd;
cmd.DependentEnd = DependentEnd;
cmd.PrincipalProperties = PrincipalProperties;
cmd.DependentProperties = DependentProperties;
return cmd.PrincipalEnd != null && cmd.DependentEnd != null;
});
CommandProcessor.InvokeSingleCommand(cpc, createRefConCommand);
}
else
{
// We're not including fk columns, so the update will consist of an association set mapping and a deletes of the fk columns (if they exist)
// otherwise update AssociationSetMapping appropriately
var createMapCommand = new CreateOrUpdateAssociationSetMappingCommand(
(c, subCpc) =>
{
var cmd = c as CreateOrUpdateAssociationSetMappingCommand;
cmd.Association = Association;
cmd.AssociationSet = AssociationSet;
cmd.EntityContainerMapping = EntityContainerMapping;
cmd.StorageEntitySet = StorageEntitySet;
return cmd.Association != null && cmd.AssociationSet != null && cmd.EntityContainerMapping != null
&& cmd.StorageEntitySet != null;
});
CommandProcessor.InvokeSingleCommand(cpc, createMapCommand);
// Delete the fk properties in the conceptual layer if they exist. Do not delete primary key properties though!
if (!IncludeFkProperties)
{
var propertiesToDelete =
DependentProperties.Where(p => p.EntityType != null && !p.EntityType.ResolvableKeys.Contains(p)).ToList();
foreach (var p in propertiesToDelete)
{
var deletePropertyCmd = new DeletePropertyCommand(
(c, subCpc) =>
{
var cmd = c as DeletePropertyCommand;
cmd.EFElement = p;
return cmd.EFElement != null;
});
CommandProcessor.InvokeSingleCommand(cpc, deletePropertyCmd);
}
}
// Add or update the EndProperty elements for the AssociationSetMapping. Try to work out which end is the principal
// end by looking at the multiplicity, since we don't have a referential constraint in this case.
AssociationSetEnd principalSetEnd;
AssociationSetEnd dependentSetEnd;
Debug.Assert(
AssociationSet.AssociationSetEnds().First().Role.Target != null,
"Role Target for Association End was null, AssociationSetMapping update failed");
if (AssociationSet.AssociationSetEnds().First().Role.Target != null)
{
if (Association.End1.Multiplicity.Value == ModelConstants.Multiplicity_Many)
{
principalSetEnd = AssociationSet.AssociationSetEnds().Last();
dependentSetEnd = AssociationSet.AssociationSetEnds().First();
}
else
{
principalSetEnd = AssociationSet.AssociationSetEnds().First();
dependentSetEnd = AssociationSet.AssociationSetEnds().Last();
}
var dependentEndPropertyCmd = new CreateOrUpdateEndPropertyCommand(
(c, subCpc) =>
{
var cmd = c as CreateOrUpdateEndPropertyCommand;
cmd.AssociationSetEnd = dependentSetEnd;
cmd.AssociationSetMapping = createMapCommand.AssociationSetMapping;
cmd.StorageKeyProperties = StorageDependentTypeKeyProperties;
cmd.ConceptualKeyProperties =
ConceptualDependentType.SafeInheritedAndDeclaredProperties.Where(p => p.IsKeyProperty);
return cmd.AssociationSetEnd != null && cmd.AssociationSetMapping != null;
});
var principalEndPropertyCmd = new CreateOrUpdateEndPropertyCommand(
(c, subCpc) =>
{
var cmd = c as CreateOrUpdateEndPropertyCommand;
cmd.AssociationSetEnd = principalSetEnd;
cmd.AssociationSetMapping = createMapCommand.AssociationSetMapping;
cmd.StorageKeyProperties = StorageDependentTypeForeignKeyProperties;
cmd.ConceptualKeyProperties =
ConceptualPrincipalType.SafeInheritedAndDeclaredProperties.Where(p => p.IsKeyProperty);
return cmd.AssociationSetEnd != null && cmd.AssociationSetMapping != null;
});
CommandProcessor.InvokeSingleCommand(cpc, dependentEndPropertyCmd);
CommandProcessor.InvokeSingleCommand(cpc, principalEndPropertyCmd);
}
}
}
}
