/// <summary>
/// 读卡器初始化
/// </summary>
/// <param name="add">机器地址 0——15</param>
/// <returns>返回串口句柄</returns>
public IntPtr Init(int port)
{
string _port = "com" + port;
IntPtr hadler = M100IC_DLL.M100_CommOpenWithBaud(_port, 9600);
return(hadler);
}
/// <summary>
/// 检查卡机状态
/// </summary>
/// <returns></returns>
public bool CheckCardPosition(IntPtr hadler)
{
try
{
byte[] ByteArray2 = new byte[2];
int i = M100IC_DLL.M100_CheckCardPosition(hadler, ByteArray2);
if (i != 0)
{
//MyMsg.MsgInfo("读取卡片在机器里的位置失败");
return(false);
}
string state = string.Empty;
switch (ByteArray2[0])
{
case 0x30:
state = "卡片在前端不夹卡位置";
break;
case 0x31:
state = "卡片在前端夹卡位置";
break;
//case 0x32:
// state = "卡片在读卡机射频卡位置";
// break;
//case 0x33:
// state = "卡片在IC卡位置";
// break;
case 0x34:
state = "卡片在后端夹卡位置";
break;
case 0x35:
state = "读卡机内无卡";
break;
case 0x36:
state = "卡不在标准位置";
break;
}
if (state != string.Empty)
{
//MyMsg.MsgInfo(state);
return(false);
}
return(true);
}
catch (Exception ex)
{
throw new Exception(ex.Message);
}
}
public string ReadCard()
{
string port = "1";
IntPtr hadler = Init(Convert.ToInt32(port));
if (hadler.ToInt32() == 0)
{
//MyMsg.MsgInfo("端口打开失败！");
return("端口打开失败！");
}
try
{
int i = M100IC_DLL.M100_EnterCard(hadler, 0x30, 3000);
if (i != 0)
{
//MyMsg.MsgInfo("进卡失败");
return("进卡失败");
}
i = M100IC_DLL.M100_MoveCard(hadler, 0x31);
if (i != 0)
{
//MyMsg.MsgInfo("卡片传动IC卡位失败");
return("卡片传动IC卡位失败");
}
i = M100IC_DLL.M100_IcCardPowerOn(hadler);
if (i != 0)
{
//MyMsg.MsgInfo("上电失败");
return("上电失败");
}
byte[] buf = new byte[3];
buf[0] = Convert.ToByte("FF", 16);
buf[1] = Convert.ToByte("FF", 16);
buf[2] = Convert.ToByte("FF", 16);
i = M100IC_DLL.M100_SLE4442VerifyPWD(hadler, buf);
if (i != 0)
{
//MyMsg.MsgInfo("密码验证失败");
return("密码验证失败");
}
byte[] _data = new byte[88];
i = M100IC_DLL.M100_SLE4442Read(hadler, 27, 88, _data);
if (i != 0)
{
//MyMsg.MsgInfo("读卡失败");
return("读卡失败");
}
i = M100IC_DLL.M100_IcCardPowerOff(hadler);
if (i != 0)
{
//MyMsg.MsgInfo("下电失败");
return("下电失败");
}
i = M100IC_DLL.M100_MoveCard(hadler, 0x32);
if (i != 0)
{
//MyMsg.MsgInfo("退卡失败");
return("退卡失败");
}
string cardNo = string.Empty;
try
{
string msg = Encoding.ASCII.GetString(_data);
//string returnstr = Pub.Decrypt(msg, "SOFT-HIS");
cardNo = msg;
}
catch
{
//MyMsg.MsgInfo("卡片数据错误！或卡插入方向不正确");
return("卡片数据错误！或卡插入方向不正确");
}
return(cardNo);
}
catch (Exception ex)
{
throw new Exception(ex.Message);
}
finally
{
ClosePort(hadler);
}
}
/// <summary>
/// 关闭端口
/// </summary>
/// <param name="hadler">打开的串口句柄</param>
public void ClosePort(IntPtr hadler)
{
int i = M100IC_DLL.M100_CommClose(hadler);
}
public string ReadCard()
{
string cardNo = string.Empty;
string port = "1";
IntPtr hadler = Init(Convert.ToInt32(port));
if (hadler.ToInt32() == 0)
{
//MyMsg.MsgInfo("端口打开失败！");
return("端口打开失败！");
}
try
{
int i = M100IC_DLL.M100_EnterCard(hadler, 0x30, 3000);
int j = 0;
if (i != 0)
{
//MyMsg.MsgInfo("进卡失败");
return("进卡失败");
}
i = M100IC_DLL.M100_MoveCard(hadler, 0x31);
if (i != 0)
{
j = M100IC_DLL.M100_MoveCard(hadler, 0x32);
if (j != 0)
{
return("退卡失败");
}
//MyMsg.MsgInfo("卡片传动IC卡位失败");
return("卡片传动IC卡位失败" + i);
}
byte[] _cputype = new byte[1];
byte[] _rstData = new byte[88];
byte[] _rstdataLen = new byte[1];
i = M100IC_DLL.M100_CpuCardColdReset(hadler, _cputype, _rstData, _rstdataLen);
if (i == 0)
{
//StringBuilder SHBZHM = new StringBuilder(1024);
//StringBuilder XM = new StringBuilder(1024);
//StringBuilder XB = new StringBuilder(1024);
//StringBuilder MZ = new StringBuilder(1024);
//StringBuilder CSD = new StringBuilder(1024);
//StringBuilder CSRQ = new StringBuilder(1024);
//StringBuilder pErrMsg = new StringBuilder(1024);
//byte[] iDNum = new byte[9];
//i = M100IC_DLL.M100_AutoReadSocialSecurityCardID(hadler, iDNum);
//if (i != 0)
//{
// j = M100IC_DLL.M100_MoveCard(hadler, 0x32);
// if (j != 0)
// {
// return "退卡失败";
// }
// return "读取社保号失败 " + i;
//}
//i = M100IC_DLL.M100_MoveCard(hadler, 0x32);
//if (i != 0)
//{
// return "退卡失败";
//}
//try
//{
// cardNo = SHBZHM.ToString();
//}
//catch
//{
// return "卡片数据错误！或卡插入方向不正确";
//}
//i = M100IC_DLL.M100_IcCardPowerOn(hadler);
//if (i != 0)
//{
// //MyMsg.MsgInfo("上电失败");
// return "上电失败";
//}
//byte[] buf = new byte[3];
//buf[0] = Convert.ToByte("FF", 16);
//buf[1] = Convert.ToByte("FF", 16);
//buf[2] = Convert.ToByte("FF", 16);
//i = M100IC_DLL.M100_SLE4442VerifyPWD(hadler, buf);
//if (i != 0)
//{
// //MyMsg.MsgInfo("密码验证失败");
// return "密码验证失败";
//}
//byte[] IDNum = new byte[9];
//i = M100IC_DLL.M100_AutoReadSocialSecurityCardID(hadler, IDNum);
//if (i != 0)
//{
// j = M100IC_DLL.M100_MoveCard(hadler, 0x32);
// if (j != 0)
// {
// return "退卡失败";
// }
// return "读卡失败" + i;
//}
byte[] IDNum = new byte[18];
byte[] Name = new byte[30];
byte[] Sex = new byte[10];
byte[] Nation = new byte[10];
byte[] Regional = new byte[3];
byte[] BirthDay = new byte[4];
byte[] CardID = new byte[9];
i = M100IC_DLL.M100_AutoReadSocialSecurityInfoAndCardID(hadler, IDNum, Name, Sex, Nation, Regional, BirthDay, CardID);
if (i != 0)
{
j = M100IC_DLL.M100_MoveCard(hadler, 0x32);
if (j != 0)
{
return("退卡失败");
}
return("读卡失败" + i);
}
//i = M100IC_DLL.M100_IcCardPowerOff(hadler);
//if (i != 0)
//{
// //MyMsg.MsgInfo("下电失败");
// return "下电失败";
//}
i = M100IC_DLL.M100_MoveCard(hadler, 0x32);
if (i != 0)
{
//MyMsg.MsgInfo("退卡失败");
return("退卡失败" + i);
}
try
{
string msg = Encoding.ASCII.GetString(IDNum);
//string returnstr = Pub.Decrypt(msg, "SOFT-HIS");
cardNo = msg;
}
catch
{
//MyMsg.MsgInfo("卡片数据错误！或卡插入方向不正确");
return("卡片数据错误！或卡插入方向不正确");
}
}
else
{
i = M100IC_DLL.M100_MoveCard(hadler, 0x30);
if (i != 0)
{
j = M100IC_DLL.M100_MoveCard(hadler, 0x32);
if (j != 0)
{
return("退卡失败");
}
return("卡片传动射频卡位失败" + i);
}
i = M100IC_DLL.M100_S50DetectCard(hadler);
if (i != 0)
{
j = M100IC_DLL.M100_MoveCard(hadler, 0x32);
if (j != 0)
{
return("退卡失败");
}
return("寻卡失败" + i);
}
byte[] _cardid = new byte[4];
i = M100IC_DLL.M100_S50GetCardID(hadler, _cardid);
if (i != 0)
{
j = M100IC_DLL.M100_MoveCard(hadler, 0x32);
if (j != 0)
{
return("退卡失败");
}
return("读卡片序列号失败" + i);
}
byte[] key = new byte[6];
key[0] = Convert.ToByte("1A", 16);
key[1] = Convert.ToByte("2C", 16);
key[2] = Convert.ToByte("3B", 16);
key[3] = Convert.ToByte("4D", 16);
key[4] = Convert.ToByte("5E", 16);
key[5] = Convert.ToByte("6F", 16);
i = M100IC_DLL.M100_S50LoadSecKey(hadler, 1, 0X30, key);
if (i != 0)
{
j = M100IC_DLL.M100_MoveCard(hadler, 0x32);
if (j != 0)
{
return("退卡失败");
}
return("校验密码失败" + i);
}
byte[] _blockData = new byte[16];
i = M100IC_DLL.M100_S50ReadBlock(hadler, 4, _blockData);
if (i != 0)
{
j = M100IC_DLL.M100_MoveCard(hadler, 0x32);
if (j != 0)
{
return("退卡失败");
}
return("读块数据失败" + i);
}
i = M100IC_DLL.M100_S50Halt(hadler);
if (i != 0)
{
j = M100IC_DLL.M100_MoveCard(hadler, 0x32);
if (j != 0)
{
return("退卡失败");
}
return("停机失败" + i);
}
i = M100IC_DLL.M100_MoveCard(hadler, 0x32);
if (i != 0)
{
return("退卡失败");
}
try
{
//string msg = Encoding.ASCII.GetString(_blockData);
string msg = "";
for (int k = 0; k < 16; k++)
{
msg += _blockData[k].ToString("x2");
}
msg = msg.Substring(msg.Length - 12);
cardNo = msg;
}
catch
{
return("卡片数据错误！或卡插入方向不正确" + cardNo);
}
}
return(cardNo);
}
catch (Exception ex)
{
throw new Exception(ex.Message);
}
finally
{
ClosePort(hadler);
}
}