| public AddContour ( Array vertices ) : void | ||
| vertices | Array | |
| Результат | void | |
/// <summary>
/// Creates a triangulation of the vertices given, and gives you the indices of it.
/// </summary>
/// <param name="aPoints">A list of points to triangulate.</param>
/// <param name="aTreatAsPath">Should we discard any triangles at all? Use this if you want to get rid of triangles that are outside the path.</param>
/// <param name="aInvert">if we're treating it as a path, should we instead sicard triangles inside the path?</param>
/// <returns>A magical list of indices describing the triangulation!</returns>
public static List <int> GetIndices(ref List <Vector2> aPoints, bool aTreatAsPath, bool aInvert)
{
Vector4 bounds = GetBounds(aPoints);
LibTessDotNet.Tess tess = new LibTessDotNet.Tess();
LibTessDotNet.ContourVertex[] verts = new LibTessDotNet.ContourVertex[aPoints.Count];
for (int i = 0; i < aPoints.Count; i++)
{
verts[i] = new LibTessDotNet.ContourVertex();
verts[i].Position = new LibTessDotNet.Vec3();
verts[i].Position.X = aPoints[i].x;
verts[i].Position.Y = aPoints[i].y;
verts[i].Position.Z = 0;
}
tess.AddContour(verts, LibTessDotNet.ContourOrientation.Original);
if (aInvert)
{
aPoints.Add(new Vector2(bounds.x - (bounds.z - bounds.x) * 1, bounds.w - (bounds.y - bounds.w) * 1)); // 4
aPoints.Add(new Vector2(bounds.z + (bounds.z - bounds.x) * 1, bounds.w - (bounds.y - bounds.w) * 1)); // 3
aPoints.Add(new Vector2(bounds.z + (bounds.z - bounds.x) * 1, bounds.y + (bounds.y - bounds.w) * 1)); // 2
aPoints.Add(new Vector2(bounds.x - (bounds.z - bounds.x) * 1, bounds.y + (bounds.y - bounds.w) * 1)); // 1
LibTessDotNet.ContourVertex[] outer = new LibTessDotNet.ContourVertex[4];
for (int i = 0; i < 4; i++)
{
outer[i] = new LibTessDotNet.ContourVertex();
outer[i].Position = new LibTessDotNet.Vec3();
outer[i].Position.X = aPoints[(aPoints.Count - 4) + i].x;
outer[i].Position.Y = aPoints[(aPoints.Count - 4) + i].y;
outer[i].Position.Z = 0;
}
tess.AddContour(outer, aInvert ? LibTessDotNet.ContourOrientation.CounterClockwise : LibTessDotNet.ContourOrientation.Clockwise);
}
tess.Tessellate(LibTessDotNet.WindingRule.EvenOdd, LibTessDotNet.ElementType.Polygons, 3);
List <int> result = new List <int>();
for (int i = 0; i < tess.Elements.Length; i += 3)
{
for (int t = 0; t < 3; t++)
{
if (tess.Elements[i + t] == -1)
{
continue;
}
for (int v = 0; v < aPoints.Count; v++)
{
if (aPoints[v].x == tess.Vertices[tess.Elements[i + t]].Position.X &&
aPoints[v].y == tess.Vertices[tess.Elements[i + t]].Position.Y)
{
result.Add(v);
break;
}
}
}
}
return(result);
}
/// <summary>
/// Creates a triangulation of the vertices given, and gives you the indices of it.
/// </summary>
/// <param name="aPoints">A list of points to triangulate.</param>
/// <param name="aTreatAsPath">Should we discard any triangles at all? Use this if you want to get rid of triangles that are outside the path.</param>
/// <param name="aInvert">if we're treating it as a path, should we instead sicard triangles inside the path?</param>
/// <returns>A magical list of indices describing the triangulation!</returns>
public static List<int> GetIndices(ref List<Vector2> aPoints, bool aTreatAsPath, bool aInvert)
{
Vector4 bounds = GetBounds(aPoints);
LibTessDotNet.Tess tess = new LibTessDotNet.Tess();
LibTessDotNet.ContourVertex[] verts = new LibTessDotNet.ContourVertex[aPoints.Count];
for (int i = 0; i < aPoints.Count; i++)
{
verts[i] = new LibTessDotNet.ContourVertex();
verts[i].Position = new LibTessDotNet.Vec3();
verts[i].Position.X = aPoints[i].x;
verts[i].Position.Y = aPoints[i].y;
verts[i].Position.Z = 0;
}
tess.AddContour(verts, LibTessDotNet.ContourOrientation.Original);
if (aInvert)
{
aPoints.Add(new Vector2(bounds.x - (bounds.z - bounds.x) * 1, bounds.w - (bounds.y - bounds.w) * 1)); // 4
aPoints.Add(new Vector2(bounds.z + (bounds.z - bounds.x) * 1, bounds.w - (bounds.y - bounds.w) * 1)); // 3
aPoints.Add(new Vector2(bounds.z + (bounds.z - bounds.x) * 1, bounds.y + (bounds.y - bounds.w) * 1)); // 2
aPoints.Add(new Vector2(bounds.x - (bounds.z - bounds.x) * 1, bounds.y + (bounds.y - bounds.w) * 1)); // 1
LibTessDotNet.ContourVertex[] outer = new LibTessDotNet.ContourVertex[4];
for (int i = 0; i < 4; i++)
{
outer[i] = new LibTessDotNet.ContourVertex();
outer[i].Position = new LibTessDotNet.Vec3();
outer[i].Position.X = aPoints[(aPoints.Count - 4) + i].x;
outer[i].Position.Y = aPoints[(aPoints.Count - 4) + i].y;
outer[i].Position.Z = 0;
}
tess.AddContour(outer, aInvert ? LibTessDotNet.ContourOrientation.CounterClockwise : LibTessDotNet.ContourOrientation.Clockwise);
}
tess.Tessellate(LibTessDotNet.WindingRule.EvenOdd, LibTessDotNet.ElementType.Polygons, 3);
List<int> result = new List<int>();
for (int i = 0; i < tess.Elements.Length; i += 3)
{
for (int t = 0; t < 3; t++)
{
if (tess.Elements[i + t] == -1)
{
continue;
}
for (int v = 0; v < aPoints.Count; v++)
{
if (aPoints[v].x == tess.Vertices[tess.Elements[i + t]].Position.X &&
aPoints[v].y == tess.Vertices[tess.Elements[i + t]].Position.Y)
{
result.Add(v);
break;
}
}
}
}
return result;
}
public static Cad2D.Polygon Tesselate(List <Cad2D.Polygon> Polygons)
{
// Create an instance of the tessellator. Can be reused.
var tess = new LibTessDotNet.Tess();
// Construct the contours from input polygons
// A polygon can be composed of multiple contours which are all tessellated at the same time.
foreach (Cad2D.Polygon poly in Polygons)
{
int numPoints = poly.Vertices.Count;
var contour = new LibTessDotNet.ContourVertex[numPoints];
for (int i = 0; i < numPoints; i++)
{
// NOTE : Z is here for convenience if you want to keep a 3D vertex position throughout the tessellation process but only X and Y are important.
contour[i].Position = new LibTessDotNet.Vec3 {
X = poly.Vertices[i].X, Y = poly.Vertices[i].Y, Z = 0.0f
};
// Data can contain any per-vertex data, here a constant color.
contour[i].Data = Color.Azure;
}
// Add the contour with a specific orientation, use "Original" if you want to keep the input orientation.
tess.AddContour(contour, LibTessDotNet.ContourOrientation.Clockwise);
}
// Tessellate!
// The winding rule determines how the different contours are combined together.
// See http://www.glprogramming.com/red/chapter11.html (section "Winding Numbers and Winding Rules") for more information.
// If you want triangles as output, you need to use "Polygons" type as output and 3 vertices per polygon.
tess.Tessellate(LibTessDotNet.WindingRule.EvenOdd, LibTessDotNet.ElementType.Polygons, 3, VertexCombine);
// Same call but the last callback is optional. Data will be null because no interpolated data would have been generated.
//tess.Tessellate(LibTessDotNet.WindingRule.EvenOdd, LibTessDotNet.ElementType.Polygons, 3); // Some vertices will have null Data in this case.
Cad2D.Polygon result = new Cad2D.Polygon();
int numTriangles = tess.ElementCount;
result.Triangles = new List <Cad2D.Triangle>();
for (int i = 0; i < numTriangles; i++)
{
var v0 = tess.Vertices[tess.Elements[i * 3]].Position;
var v1 = tess.Vertices[tess.Elements[i * 3 + 1]].Position;
var v2 = tess.Vertices[tess.Elements[i * 3 + 2]].Position;
result.Triangles.Add(new Cad2D.Triangle(v0.X, v0.Y, v1.X, v1.Y, v2.X, v2.Y));
}
return(result);
}
static void Main(string[] args)
{
// Example input data in the form of a star that intersects itself.
var inputData = new float[] { 0.0f, 3.0f, -1.0f, 0.0f, 1.6f, 1.9f, -1.6f, 1.9f, 1.0f, 0.0f };
// Create an instance of the tessellator. Can be reused.
var tess = new LibTessDotNet.Tess();
// Construct the contour from inputData.
// A polygon can be composed of multiple contours which are all tessellated at the same time.
int numPoints = inputData.Length / 2;
var contour = new LibTessDotNet.ContourVertex[numPoints];
for (int i = 0; i < numPoints; i++)
{
// NOTE : Z is here for convenience if you want to keep a 3D vertex position throughout the tessellation process but only X and Y are important.
contour[i].Position = new LibTessDotNet.Vec3 {
X = inputData[i * 2], Y = inputData[i * 2 + 1], Z = 0.0f
};
// Data can contain any per-vertex data, here a constant color.
contour[i].Data = Color.Azure;
}
// Add the contour with a specific orientation, use "Original" if you want to keep the input orientation.
tess.AddContour(contour, LibTessDotNet.ContourOrientation.Clockwise);
// Tessellate!
// The winding rule determines how the different contours are combined together.
// See http://www.glprogramming.com/red/chapter11.html (section "Winding Numbers and Winding Rules") for more information.
// If you want triangles as output, you need to use "Polygons" type as output and 3 vertices per polygon.
tess.Tessellate(LibTessDotNet.WindingRule.EvenOdd, LibTessDotNet.ElementType.Polygons, 3, VertexCombine);
// Same call but the last callback is optional. Data will be null because no interpolated data would have been generated.
//tess.Tessellate(LibTessDotNet.WindingRule.EvenOdd, LibTessDotNet.ElementType.Polygons, 3); // Some vertices will have null Data in this case.
Console.WriteLine("Output triangles:");
int numTriangles = tess.ElementCount;
for (int i = 0; i < numTriangles; i++)
{
var v0 = tess.Vertices[tess.Elements[i * 3]].Position;
var v1 = tess.Vertices[tess.Elements[i * 3 + 1]].Position;
var v2 = tess.Vertices[tess.Elements[i * 3 + 2]].Position;
Console.WriteLine("#{0} ({1:F1},{2:F1}) ({3:F1},{4:F1}) ({5:F1},{6:F1})", i, v0.X, v0.Y, v1.X, v1.Y, v2.X, v2.Y);
}
Console.ReadLine();
}
static void Main(string[] args)
{
// Example input data in the form of a star that intersects itself.
var inputData = new float[] { 0.0f, 3.0f, -1.0f, 0.0f, 1.6f, 1.9f, -1.6f, 1.9f, 1.0f, 0.0f };
// Create an instance of the tessellator. Can be reused.
var tess = new LibTessDotNet.Tess();
// Construct the contour from inputData.
// A polygon can be composed of multiple contours which are all tessellated at the same time.
int numPoints = inputData.Length / 2;
var contour = new LibTessDotNet.ContourVertex[numPoints];
for (int i = 0; i < numPoints; i++)
{
// NOTE : Z is here for convenience if you want to keep a 3D vertex position throughout the tessellation process but only X and Y are important.
contour[i].Position = new LibTessDotNet.Vec3 { X = inputData[i * 2], Y = inputData[i * 2 + 1], Z = 0.0f };
// Data can contain any per-vertex data, here a constant color.
contour[i].Data = Color.Azure;
}
// Add the contour with a specific orientation, use "Original" if you want to keep the input orientation.
tess.AddContour(contour, LibTessDotNet.ContourOrientation.Clockwise);
// Tessellate!
// The winding rule determines how the different contours are combined together.
// See http://www.glprogramming.com/red/chapter11.html (section "Winding Numbers and Winding Rules") for more information.
// If you want triangles as output, you need to use "Polygons" type as output and 3 vertices per polygon.
tess.Tessellate(LibTessDotNet.WindingRule.EvenOdd, LibTessDotNet.ElementType.Polygons, 3, VertexCombine);
// Same call but the last callback is optional. Data will be null because no interpolated data would have been generated.
//tess.Tessellate(LibTessDotNet.WindingRule.EvenOdd, LibTessDotNet.ElementType.Polygons, 3); // Some vertices will have null Data in this case.
Console.WriteLine("Output triangles:");
int numTriangles = tess.ElementCount;
for (int i = 0; i < numTriangles; i++)
{
var v0 = tess.Vertices[tess.Elements[i * 3]].Position;
var v1 = tess.Vertices[tess.Elements[i * 3 + 1]].Position;
var v2 = tess.Vertices[tess.Elements[i * 3 + 2]].Position;
Console.WriteLine("#{0} ({1:F1},{2:F1}) ({3:F1},{4:F1}) ({5:F1},{6:F1})", i, v0.X, v0.Y, v1.X, v1.Y, v2.X, v2.Y);
}
Console.ReadLine();
}
private void adaptate()
{
if (!this.aad.isRectangular() && this.aad.getInfluenceArea() != null)
{
this.transform.localScale = new Vector3(1, 1, 1);
Mesh mesh = new Mesh();
List <Vector3> vertices = new List <Vector3>();
Tess tess = new LibTessDotNet.Tess();
ContourVertex[] contour = new ContourVertex[aad.getPoints().Count];
int i = 0;
float minx = float.MaxValue, miny = float.MaxValue, maxx = 0, maxy = 0;
foreach (Vector2 v in this.aad.getPoints())
{
if (v.x < minx)
{
minx = v.x;
}
if (v.x > maxx)
{
maxx = v.x;
}
if (v.y < miny)
{
miny = v.y;
}
if (v.y > maxy)
{
maxy = v.y;
}
}
minx = (minx + (maxx - minx) / 2) / 10;
miny = 60 - (miny + (maxy - miny) / 2) / 10;
foreach (Vector2 v in this.aad.getPoints())
{
contour[i].Position = new LibTessDotNet.Vec3 {
X = v.x / 10f - minx, Y = 60 - v.y / 10f - miny, Z = this.transform.position.z
};
i++;
}
tess.AddContour(contour, LibTessDotNet.ContourOrientation.CounterClockwise);
tess.Tessellate(WindingRule.EvenOdd, LibTessDotNet.ElementType.Polygons, 3);
List <int> triangles = new List <int>();
int numTriangles = tess.ElementCount;
for (i = 0; i < numTriangles; i++)
{
vertices.Add(Vec3toVector3(tess.Vertices[tess.Elements[i * 3]].Position));
vertices.Add(Vec3toVector3(tess.Vertices[tess.Elements[i * 3 + 1]].Position));
vertices.Add(Vec3toVector3(tess.Vertices[tess.Elements[i * 3 + 2]].Position));
triangles.AddRange(new int[] { i * 3, i * 3 + 1, i * 3 + 2 });
}
mesh.SetVertices(vertices);
mesh.SetTriangles(triangles, 0);
this.GetComponent <MeshFilter>().sharedMesh = mesh;
this.GetComponent <MeshCollider>().sharedMesh = mesh;
}
}
public void DrawPath(Path path, VBO vbo)
{
List <List <Vector2> > shapes = new List <List <Vector2> >();
List <Vector2> positions = new List <Vector2>();
List <Vector2> tesselated = new List <Vector2>();
Point position = new Point();
foreach (var op in path.Operations)
{
var mt = op as MoveTo;
if (mt != null)
{
shapes.Add(positions);
positions = new List <Vector2>();
positions.Add(Vec2(mt.Point));
position = mt.Point;
continue;
}
var lt = op as LineTo;
if (lt != null)
{
positions.Add(Vec2(lt.Point));
position = lt.Point;
continue;
}
var at = op as ArcTo;
if (at != null)
{
var p = nsvg.nsvg__pathArcTo((Vector2d)Vec2(position), at);
positions.AddRange(p);
position = at.Point;
continue;
}
var ct = op as CurveTo;
if (ct != null)
{
if (double.IsNaN(ct.Control1.X) && double.IsNaN(ct.Control1.Y))
{
BezierCurveQuadric b = new BezierCurveQuadric(Vec2(position), Vec2(ct.EndPoint),
Vec2(ct.Control2));
Vector2 old = b.CalculatePoint(0f);
positions.Add(old);
var precision = 0.05f;
for (float i = precision; i < 1f + precision; i += precision)
{
Vector2 j = b.CalculatePoint(i);
positions.Add(j);
old = j;
}
}
else
{
BezierCurveCubic b = new BezierCurveCubic(Vec2(position), Vec2(ct.EndPoint), Vec2(ct.Control1),
Vec2(ct.Control2));
Vector2 old = b.CalculatePoint(0f);
positions.Add(old);
var precision = 0.05f;
for (float i = precision; i < 1f + precision; i += precision)
{
Vector2 j = b.CalculatePoint(i);
positions.Add(j);
}
}
position = ct.EndPoint;
}
var cp = op as ClosePath;
if (cp != null)
{
if (positions.Count > 0)
{
positions.Add(positions[0]);
shapes.Add(positions);
}
positions = new List <Vector2>();
position = new Point();
continue;
}
}
shapes.Add(positions);
brushcheck(path.Brush);
LibTessDotNet.Tess t = new LibTessDotNet.Tess();
List <Vec3> vertices = new List <Vec3>();
foreach (var s in shapes)
{
ContourVertex[] cv = new ContourVertex[s.Count];
for (int i = 0; i < s.Count; i++)
{
var v = s[i];
cv[i] = new ContourVertex()
{
Position = new Vec3()
{
X = v.X, Y = v.Y
}
};
}
t.AddContour(cv);
}
var rule = LibTessDotNet.WindingRule.NonZero;
if (path.Brush != null)
{
rule = path.Brush.FillMode == FillMode.EvenOdd ? LibTessDotNet.WindingRule.EvenOdd : LibTessDotNet.WindingRule.NonZero;
}
t.Tessellate(rule, LibTessDotNet.ElementType.Polygons, 3);
for (var i = 0; i < t.ElementCount; i++)
{
for (var tri = 0; tri < 3; tri++)
{
vertices.Add(t.Vertices[t.Elements[(i * 3) + tri]].Position);
}
}
for (int i = 0; i < vertices.Count; i++)
{
tesselated.Add(new Vector2(vertices[i].X, vertices[i].Y));
}
var lineshapes = new List <List <Vector2> >();
foreach (var s in shapes)
{
if (s.Count == 0)
{
continue;
}
List <Vector2> add = new List <Vector2>();
for (int i = 0; i < s.Count; i++)
{
add.Add(new Vector2(s[i].X, s[i].Y));
}
lineshapes.Add(add);
}
if (path.Brush is SolidBrush || path.Pen != null)
{
if (path.Brush is SolidBrush)
{
var sb = path.Brush as SolidBrush;
for (int i = 0; i < tesselated.Count; i++)
{
vbo.AddVertex(new Vertex(tesselated[i], color(sb.Color)));
}
}
if (path.Pen != null)
{
foreach (var list in lineshapes)
{
foreach (var v in TesselateLines(list, path.Pen))
{
vbo.AddVertex(v);
}
}
}
}
}
private List <Vertex> TesselateLines(List <Vector2> points, Pen p)
{
List <ContourVertex> vecs = new List <ContourVertex>();
List <Vertex> ret = new List <Vertex>();
if (points.Count < 2)
{
return(ret);
}
var co = color(p.Color);
MatterHackers.Agg.VertexSource.PathStorage ps = new MatterHackers.Agg.VertexSource.PathStorage();
ps.remove_all();
ps.MoveTo(points[0].X, points[0].Y);
for (int i = 1; i < points.Count; i++)
{
ps.LineTo(points[i].X, points[i].Y);
}
ps.end_poly();
MatterHackers.Agg.VertexSource.Stroke str = new MatterHackers.Agg.VertexSource.Stroke(ps, p.Width);
switch (p.Join)
{
case LineJoin.Round:
str.line_join(MatterHackers.Agg.VertexSource.LineJoin.Round);
str.inner_join(MatterHackers.Agg.VertexSource.InnerJoin.Round);
break;
case LineJoin.Miter:
str.line_join(MatterHackers.Agg.VertexSource.LineJoin.Miter);
str.inner_join(MatterHackers.Agg.VertexSource.InnerJoin.Miter);
str.inner_miter_limit(p.MiterLimit);
str.miter_limit(p.MiterLimit);
break;
}
switch (p.Cap)
{
case LineCaps.Butt:
str.line_cap(MatterHackers.Agg.VertexSource.LineCap.Butt);
break;
case LineCaps.Round:
str.line_cap(MatterHackers.Agg.VertexSource.LineCap.Round);
break;
case LineCaps.Square:
str.line_cap(MatterHackers.Agg.VertexSource.LineCap.Square);
break;
}
str.rewind(0);
double x, y;
LibTessDotNet.Tess t = new LibTessDotNet.Tess();
ShapePath.FlagsAndCommand cmd;
do
{
cmd = str.vertex(out x, out y);
if (ShapePath.is_vertex(cmd))
{
vecs.Add(new ContourVertex()
{
Position = new Vec3()
{
X = (float)x, Y = (float)y
}
});
}
if (ShapePath.is_end_poly(cmd))
{
t.AddContour(vecs.ToArray());
vecs.Clear();
}
} while (!ShapePath.is_stop(cmd));
/*
* foreach (var v in vertices)
* {
* if (!ShapePath.is_close(v.command) && !ShapePath.is_stop(v.command))
* vecs.Add(new Vector2((float)v.position.x, (float)v.position.y));
* }*/
if (vecs.Count != 0)
{
t.AddContour(vecs.ToArray());
}
t.Tessellate(LibTessDotNet.WindingRule.NonZero, LibTessDotNet.ElementType.Polygons, 3);
for (var i = 0; i < t.ElementCount; i++)
{
for (var tri = 0; tri < 3; tri++)
{
var v = t.Vertices[t.Elements[(i * 3) + tri]].Position;
ret.Add(new Vertex(v.X, v.Y, co));
}
}
return(ret);
}
void StartOld() {
OsmBuilding building = Data.Instance.buildings [buildingId];
//float[] points = building.getPolygon ();
Vector3[] points = building.getPolygonAsVector3 ();
var tess = new LibTessDotNet.Tess();
//Debug.Log ("-" + buildingId);
var contour = new LibTessDotNet.ContourVertex[points.Length];
for (int i = 0; i < points.Length; i++)
{
// NOTE : Z is here for convenience if you want to keep a 3D vertex position throughout the tessellation process but only X and Y are important.
contour[i].Position = new LibTessDotNet.Vec3 { X = points[i].x, Y = points[i].y, Z = points[i].z };
// Data can contain any per-vertex data, here a constant color.
contour[i].Data = Color.cyan;
if (i != points.Length-1) {
Debug.DrawLine(points [i], points [i + 1],Color.red,2000f);
}
}
tess.AddContour(contour, LibTessDotNet.ContourOrientation.Original);
tess.Tessellate(LibTessDotNet.WindingRule.EvenOdd, LibTessDotNet.ElementType.Polygons, 3, VertexCombine);
//gameObject.AddComponent<MeshFilter>();
//gameObject.AddComponent<MeshRenderer>();
Mesh mesh = new Mesh ();
mesh.Clear();
mesh.name = "Building";
mesh.vertices = points;
mesh.RecalculateNormals();
mesh.RecalculateBounds();
Vector2[] uvs = new Vector2[points.Length];
Bounds bounds = mesh.bounds;
for(int i = 0; i < points.Length; i++) {
uvs[i] = new Vector2(points[i].x / bounds.size.x, points[i].z / bounds.size.x);
}
mesh.uv = uvs;
mesh.triangles = tess.Elements;
GameObject meshObject = new GameObject ();
meshObject.AddComponent<MeshFilter> ().mesh = mesh;
Renderer renderer = meshObject.AddComponent<MeshRenderer> ();
meshObject.transform.parent = this.transform;
//meshObject.transform.position = new Vector3(-mesh.bounds.center.x, -mesh.bounds.center.y, -mesh.bounds.center.z);
//gameObject.transform.position = new Vector3(-mesh.bounds.center.x, -mesh.bounds.center.y, -mesh.bounds.center.z);
//GetComponent<MeshRenderer> ().material = Resources.Load<Material> ("Source/Red");
}
public List <Triangle> TrianglateGlyph(Glyph g)
{
var re = new List <Triangle>();
var tess = new LibTessDotNet.Tess();
var c = 0;
var last = 0;
var vecs = new List <Vec3>();
for (var i = 0; i < g.Points.Count; i++)
{
var glyphPointA = g.Points[i];
vecs.Add(new Vec3()
{
X = glyphPointA["x"],
Y = glyphPointA["y"],
Z = 0
});
if (i == g.ContourEnds[c])
{
c += 1;
var contour = new LibTessDotNet.ContourVertex[vecs.Count];
for (var index = 0; index < vecs.Count; index++)
{
contour[index].Position = vecs[index];
contour[index].Data = Color.Black;
}
tess.AddContour(contour, LibTessDotNet.ContourOrientation.Clockwise);
vecs.Clear();
}
}
tess.Tessellate(LibTessDotNet.WindingRule.EvenOdd, LibTessDotNet.ElementType.Polygons, 3);
Console.WriteLine("Output triangles:");
int numTriangles = tess.ElementCount;
for (int i = 0; i < numTriangles; i++)
{
var v0 = tess.Vertices[tess.Elements[i * 3]].Position;
var v1 = tess.Vertices[tess.Elements[i * 3 + 1]].Position;
var v2 = tess.Vertices[tess.Elements[i * 3 + 2]].Position;
re.Add(new Triangle(new Point((int)v0.X, (int)v0.Y),
new Point((int)v1.X, (int)v1.Y),
new Point((int)v2.X, (int)v2.Y)));
}
return(re);
}
private static void ToTess(PolygonSet pset, Tess tess)
{
foreach (var poly in pset)
{
var v = new ContourVertex[poly.Count];
for (int i = 0; i < poly.Count; i++)
{
v[i].Position = new Vec3 { X = poly[i].X, Y = poly[i].Y };
v[i].Data = poly[i].Color;
}
tess.AddContour(v, poly.Orientation);
}
}
private void adaptate()
{
if (!this.aad.isRectangular() && this.aad.getInfluenceArea () != null) {
this.transform.localScale = new Vector3 (1, 1, 1);
Mesh mesh = new Mesh ();
List<Vector3> vertices = new List<Vector3> ();
List<Vector2> vertices2 = new List<Vector2> ();
Tess tess = new LibTessDotNet.Tess();
ContourVertex[] contour = new ContourVertex[aad.getPoints().Count];
int i = 0;
float minx = float.MaxValue, miny = float.MaxValue, maxx = 0, maxy = 0;
foreach (Vector2 v in this.aad.getPoints()) {
if (v.x < minx)
minx = v.x;
if (v.x > maxx)
maxx = v.x;
if (v.y < miny)
miny = v.y;
if (v.y > maxy)
maxy = v.y;
}
minx = (minx + (maxx - minx) / 2 ) / 10;
miny = 60 - (miny + (maxy - miny) / 2 ) / 10;
foreach (Vector2 v in this.aad.getPoints()) {
contour[i].Position = new LibTessDotNet.Vec3 { X = v.x / 10f - minx, Y = 60 - v.y / 10f - miny, Z = this.transform.position.z };
i++;
}
tess.AddContour(contour, LibTessDotNet.ContourOrientation.CounterClockwise);
tess.Tessellate(WindingRule.EvenOdd, LibTessDotNet.ElementType.Polygons,3);
Debug.Log("Output triangles:");
List<int> triangles = new List<int> ();
int numTriangles = tess.ElementCount;
for (i = 0; i < numTriangles; i++){
vertices.Add(Vec3toVector3(tess.Vertices[tess.Elements[i * 3]].Position));
vertices.Add(Vec3toVector3(tess.Vertices[tess.Elements[i * 3 + 1]].Position));
vertices.Add(Vec3toVector3(tess.Vertices[tess.Elements[i * 3 + 2]].Position));
triangles.AddRange(new int[] { i * 3, i * 3+1, i * 3+2 });
}
mesh.SetVertices (vertices);
mesh.SetTriangles (triangles,0);
this.GetComponent<MeshFilter> ().sharedMesh = mesh;
this.GetComponent<MeshCollider> ().sharedMesh = mesh;
}
}
private static void ToTess(PolygonSet pset, Tess tess)
{
foreach (var poly in pset)
{
var v = new CCRawList<Vector3>(poly.Count);
for (int i = 0; i < poly.Count; i++)
{
v.Add(new Vector3(poly[i].X, poly[i].Y, 0));
}
tess.AddContour(v, poly.Orientation);
}
}