| static private GenerateRandomStringImpl ( int length, int delta ) : string | ||
| length | int | |
| delta | int | |
| Результат | string | |
/// <summary>
/// Saves the Zip archive to a file, specified by the Name property of the
/// <c>ZipFile</c>.
/// </summary>
///
/// <remarks>
/// <para>
/// The <c>ZipFile</c> instance is written to storage, typically a zip file
/// in a filesystem, only when the caller calls <c>Save</c>. In the typical
/// case, the Save operation writes the zip content to a temporary file, and
/// then renames the temporary file to the desired name. If necessary, this
/// method will delete a pre-existing file before the rename.
/// </para>
///
/// <para>
/// The <see cref="ZipFile.Name"/> property is specified either explicitly,
/// or implicitly using one of the parameterized ZipFile constructors. For
/// COM Automation clients, the <c>Name</c> property must be set explicitly,
/// because COM Automation clients cannot call parameterized constructors.
/// </para>
///
/// <para>
/// When using a filesystem file for the Zip output, it is possible to call
/// <c>Save</c> multiple times on the <c>ZipFile</c> instance. With each
/// call the zip content is re-written to the same output file.
/// </para>
///
/// <para>
/// Data for entries that have been added to the <c>ZipFile</c> instance is
/// written to the output when the <c>Save</c> method is called. This means
/// that the input streams for those entries must be available at the time
/// the application calls <c>Save</c>. If, for example, the application
/// adds entries with <c>AddEntry</c> using a dynamically-allocated
/// <c>MemoryStream</c>, the memory stream must not have been disposed
/// before the call to <c>Save</c>. See the <see
/// cref="ZipEntry.InputStream"/> property for more discussion of the
/// availability requirements of the input stream for an entry, and an
/// approach for providing just-in-time stream lifecycle management.
/// </para>
///
/// </remarks>
///
/// <seealso cref="Ionic.Zip.ZipFile.AddEntry(String, System.IO.Stream)"/>
///
/// <exception cref="Ionic.Zip.BadStateException">
/// Thrown if you haven't specified a location or stream for saving the zip,
/// either in the constructor or by setting the Name property, or if you try
/// to save a regular zip archive to a filename with a .exe extension.
/// </exception>
///
/// <exception cref="System.OverflowException">
/// Thrown if <see cref="MaxOutputSegmentSize"/> is non-zero, and the number
/// of segments that would be generated for the spanned zip file during the
/// save operation exceeds 99. If this happens, you need to increase the
/// segment size.
/// </exception>
///
public void Save()
{
try
{
bool thisSaveUsedZip64 = false;
_saveOperationCanceled = false;
_numberOfSegmentsForMostRecentSave = 0;
OnSaveStarted();
if (WriteStream == null)
{
throw new BadStateException("You haven't specified where to save the zip.");
}
if (_name != null && _name.EndsWith(".exe") && !_SavingSfx)
{
throw new BadStateException("You specified an EXE for a plain zip file.");
}
// check if modified, before saving.
if (!_contentsChanged)
{
OnSaveCompleted();
if (Verbose)
{
StatusMessageTextWriter.WriteLine("No save is necessary....");
}
return;
}
Reset(true);
if (Verbose)
{
StatusMessageTextWriter.WriteLine("saving....");
}
// validate the number of entries
if (_entries.Count >= 0xFFFF && _zip64 == Zip64Option.Never)
{
throw new ZipException("The number of entries is 65535 or greater. Consider setting the UseZip64WhenSaving property on the ZipFile instance.");
}
// write an entry in the zip for each file
int n = 0;
// workitem 9831
ICollection <ZipEntry> c = (SortEntriesBeforeSaving) ? EntriesSorted : Entries;
foreach (ZipEntry e in c) // _entries.Values
{
OnSaveEntry(n, e, true);
e.Write(WriteStream);
if (_saveOperationCanceled)
{
break;
}
n++;
OnSaveEntry(n, e, false);
if (_saveOperationCanceled)
{
break;
}
// Some entries can be skipped during the save.
if (e.IncludedInMostRecentSave)
{
thisSaveUsedZip64 |= e.OutputUsedZip64.Value;
}
}
if (_saveOperationCanceled)
{
return;
}
var zss = WriteStream as ZipSegmentedStream;
_numberOfSegmentsForMostRecentSave = (zss != null)
? zss.CurrentSegment
: 1;
bool directoryNeededZip64 =
ZipOutput.WriteCentralDirectoryStructure
(WriteStream,
c,
_numberOfSegmentsForMostRecentSave,
_zip64,
Comment,
new ZipContainer(this));
OnSaveEvent(ZipProgressEventType.Saving_AfterSaveTempArchive);
_hasBeenSaved = true;
_contentsChanged = false;
thisSaveUsedZip64 |= directoryNeededZip64;
_OutputUsesZip64 = new Nullable <bool>(thisSaveUsedZip64);
if (_fileAlreadyExists && this._readstream != null)
{
// This means we opened and read a zip file.
// If we are now saving, we need to close the orig file, first.
this._readstream.Close();
this._readstream = null;
}
// the archiveStream for each entry needs to be null
foreach (var e in c)
{
var zss1 = e._archiveStream as ZipSegmentedStream;
if (zss1 != null)
#if NETCF
{ zss1.Close(); }
#else
{ zss1.Dispose(); }
#endif
e._archiveStream = null;
}
// do the rename as necessary
if (_name != null &&
(_temporaryFileName != null || zss != null))
{
// _temporaryFileName may remain null if we are writing to a stream.
// only close the stream if there is a file behind it.
#if NETCF
WriteStream.Close();
#else
WriteStream.Dispose();
#endif
if (_saveOperationCanceled)
{
return;
}
string tmpName = null;
if (File.Exists(_name))
{
// the steps:
//
// 1. Delete tmpName
// 2. move existing zip to tmpName
// 3. rename (File.Move) working file to name of existing zip
// 4. delete tmpName
//
// This series of steps avoids the exception,
// System.IO.IOException:
// "Cannot create a file when that file already exists."
//
// Cannot just call File.Replace() here because
// there is a possibility that the TEMP volume is different
// that the volume for the final file (c:\ vs d:\).
// So we need to do a Delete+Move pair.
//
// But, when doing the delete, Windows allows a process to
// delete the file, even though it is held open by, say, a
// virus scanner. It gets internally marked as "delete
// pending". The file does not actually get removed from the
// file system, it is still there after the File.Delete
// call.
//
// Therefore, we need to move the existing zip, which may be
// held open, to some other name. Then rename our working
// file to the desired name, then delete (possibly delete
// pending) the "other name".
//
// Ideally this would be transactional. It's possible that the
// delete succeeds and the move fails. Lacking transactions, if
// this kind of failure happens, we're hosed, and this logic will
// throw on the next File.Move().
//
//File.Delete(_name);
// workitem 10447
#if NETCF || SILVERLIGHT
tmpName = _name + "." + SharedUtilities.GenerateRandomStringImpl(8, 0) + ".tmp";
#else
tmpName = _name + "." + Path.GetRandomFileName();
#endif
if (File.Exists(tmpName))
{
DeleteFileWithRetry(tmpName);
}
File.Move(_name, tmpName);
}
OnSaveEvent(ZipProgressEventType.Saving_BeforeRenameTempArchive);
File.Move((zss != null) ? zss.CurrentTempName : _temporaryFileName,
_name);
OnSaveEvent(ZipProgressEventType.Saving_AfterRenameTempArchive);
if (tmpName != null)
{
try
{
// not critical
if (File.Exists(tmpName))
{
File.Delete(tmpName);
}
}
catch
{
// don't care about exceptions here.
}
}
_fileAlreadyExists = true;
}
_readName = _name;
NotifyEntriesSaveComplete(c);
OnSaveCompleted();
_JustSaved = true;
}
// workitem 5043
finally
{
CleanupAfterSaveOperation();
}
return;
}
/// <summary>
/// Saves the Zip archive to a file, specified by the Name property of the
/// <c>ZipFile</c>.
/// </summary>
///
/// <remarks>
/// <para>
/// The <c>ZipFile</c> instance is written to storage, typically a zip file
/// in a filesystem, only when the caller calls <c>Save</c>. In the typical
/// case, the Save operation writes the zip content to a temporary file, and
/// then renames the temporary file to the desired name. If necessary, this
/// method will delete a pre-existing file before the rename.
/// </para>
///
/// <para>
/// The <see cref="ZipFile.Name"/> property is specified either explicitly,
/// or implicitly using one of the parameterized ZipFile constructors. For
/// COM Automation clients, the <c>Name</c> property must be set explicitly,
/// because COM Automation clients cannot call parameterized constructors.
/// </para>
///
/// <para>
/// When using a filesystem file for the Zip output, it is possible to call
/// <c>Save</c> multiple times on the <c>ZipFile</c> instance. With each
/// call the zip content is re-written to the same output file.
/// </para>
///
/// <para>
/// Data for entries that have been added to the <c>ZipFile</c> instance is
/// written to the output when the <c>Save</c> method is called. This means
/// that the input streams for those entries must be available at the time
/// the application calls <c>Save</c>. If, for example, the application
/// adds entries with <c>AddEntry</c> using a dynamically-allocated
/// <c>MemoryStream</c>, the memory stream must not have been disposed
/// before the call to <c>Save</c>. See the <see
/// cref="ZipEntry.InputStream"/> property for more discussion of the
/// availability requirements of the input stream for an entry, and an
/// approach for providing just-in-time stream lifecycle management.
/// </para>
///
/// </remarks>
///
/// <seealso cref="Ionic.Zip.ZipFile.AddEntry(String, System.IO.Stream)"/>
///
/// <exception cref="Ionic.Zip.BadStateException">
/// Thrown if you haven't specified a location or stream for saving the zip,
/// either in the constructor or by setting the Name property, or if you try
/// to save a regular zip archive to a filename with a .exe extension.
/// </exception>
///
/// <exception cref="System.OverflowException">
/// Thrown if <see cref="MaxOutputSegmentSize"/> is non-zero, and the number
/// of segments that would be generated for the spanned zip file during the
/// save operation exceeds 99. If this happens, you need to increase the
/// segment size.
/// </exception>
///
public void Save()
{
try
{
bool thisSaveUsedZip64 = false;
_saveOperationCanceled = false;
_numberOfSegmentsForMostRecentSave = 0;
OnSaveStarted();
if (WriteStream == null)
{
throw new BadStateException("You haven't specified where to save the zip.");
}
if (_name != null && _name.EndsWith(".exe") && !_SavingSfx)
{
throw new BadStateException("You specified an EXE for a plain zip file.");
}
// check if modified, before saving.
if (!_contentsChanged)
{
OnSaveCompleted();
if (Verbose)
{
StatusMessageTextWriter.WriteLine("No save is necessary....");
}
return;
}
Reset(true);
if (Verbose)
{
StatusMessageTextWriter.WriteLine("saving....");
}
// validate the number of entries
if (_entries.Count >= 0xFFFF && _zip64 == Zip64Option.Never)
{
throw new ZipException("The number of entries is 65535 or greater. Consider setting the UseZip64WhenSaving property on the ZipFile instance.");
}
// write an entry in the zip for each file
int n = 0;
// workitem 9831
ICollection <ZipEntry> c = (SortEntriesBeforeSaving) ? EntriesSorted : Entries;
foreach (ZipEntry e in c) // _entries.Values
{
OnSaveEntry(n, e, true);
e.Write(WriteStream);
if (_saveOperationCanceled)
{
break;
}
n++;
OnSaveEntry(n, e, false);
if (_saveOperationCanceled)
{
break;
}
// Some entries can be skipped during the save.
if (e.IncludedInMostRecentSave)
{
thisSaveUsedZip64 |= e.OutputUsedZip64.Value;
}
}
if (_saveOperationCanceled)
{
return;
}
var zss = WriteStream as ZipSegmentedStream;
_numberOfSegmentsForMostRecentSave = (zss != null)
? zss.CurrentSegment
: 1;
bool directoryNeededZip64 =
ZipOutput.WriteCentralDirectoryStructure
(WriteStream,
c,
_numberOfSegmentsForMostRecentSave,
_zip64,
Comment,
new ZipContainer(this));
OnSaveEvent(ZipProgressEventType.Saving_AfterSaveTempArchive);
_hasBeenSaved = true;
_contentsChanged = false;
thisSaveUsedZip64 |= directoryNeededZip64;
_OutputUsesZip64 = new Nullable <bool>(thisSaveUsedZip64);
// do the rename as necessary
if (_name != null &&
(_temporaryFileName != null || zss != null))
{
// _temporaryFileName may remain null if we are writing to a stream.
// only close the stream if there is a file behind it.
#if NETCF
WriteStream.Close();
#else
WriteStream.Dispose();
#endif
if (_saveOperationCanceled)
{
return;
}
if (_fileAlreadyExists && this._readstream != null)
{
// This means we opened and read a zip file.
// If we are now saving to the same file, we need to close the
// orig file, first.
this._readstream.Close();
this._readstream.Dispose();
this._readstream = null;
// the archiveStream for each entry needs to be null
foreach (var e in c)
{
var zss1 = e._archiveStream as ZipSegmentedStream;
if (zss1 != null)
#if NETCF
{ zss1.Close(); }
#else
{ zss1.Dispose(); }
#endif
e._archiveStream = null;
}
}
if (_fileAlreadyExists && this._writestream != null)
{
this.WriteStream.Close();
}
string tmpName = null;
if (File.Exists(_name))
{
// the steps:
//
// 1. Delete tmpName
// 2. move existing zip to tmpName
// 3. rename (File.Move) working file to name of existing zip
// 4. delete tmpName
//
// This series of steps avoids the exception,
// System.IO.IOException:
// "Cannot create a file when that file already exists."
//
// Cannot just call File.Replace() here because
// there is a possibility that the TEMP volume is different
// that the volume for the final file (c:\ vs d:\).
// So we need to do a Delete+Move pair.
//
// But, when doing the delete, Windows allows a process to
// delete the file, even though it is held open by, say, a
// virus scanner. It gets internally marked as "delete
// pending". The file does not actually get removed from the
// file system, it is still there after the File.Delete
// call.
//
// Therefore, we need to move the existing zip, which may be
// held open, to some other name. Then rename our working
// file to the desired name, then delete (possibly delete
// pending) the "other name".
//
// Ideally this would be transactional. It's possible that the
// delete succeeds and the move fails. Lacking transactions, if
// this kind of failure happens, we're hosed, and this logic will
// throw on the next File.Move().
//
//File.Delete(_name);
// workitem 10447
#if NETCF || SILVERLIGHT
tmpName = _name + "." + SharedUtilities.GenerateRandomStringImpl(8, 0) + ".tmp";
#else
tmpName = _name + "." + Path.GetRandomFileName();
#endif
if (File.Exists(tmpName))
{
DeleteFileWithRetry(tmpName);
}
try {
File.Move(_name, tmpName);
}
catch {
if (System.Diagnostics.Debugger.IsAttached)
{
System.Diagnostics.Debugger.Break(); //Look at the comment below. Added this to force a break here instead of your catch so you don't miss the cause and waste your time like I did
}
throw;
}
//Oh boy. You've just hit an exception on that File.Move line right above this stating that the template file can't be renamed because it's open
//in another process, right?
//Congratulation! You've probably run into the same gibberish I ran into!
//Check to make sure your file streams are closed, and ITpipes/Template Editor/Winrar/7-Zip don't have the template file open. I'm betting you won't find anything.
//If you try closing Visual Studio and running the binary directly I'm betting you won't have this crash occur. Go ahead--try it.
//What the hell, right?
//The XAML designer process (XDesProc.exe) is configured, by default, to populate its ViewModel in the designer UI. This creates a copy of the model--which creates a second
//Ionic.Zip.ZipFile object using the same template file. So when *this* ZipFile object attempts to move the existing template to replace it with an updated file
//the exception is thrown.
//To fix this, disable the following option in the Visual Studio toolbar above:
// Tools -> Options -> XAML Designer -> "Run project code in XAML Designer (if supported)"
//Once that's disabled, restart Visual Studio. Problem solved.
//Hopefully these comments will prevent someone else from wasting their time obsessing over their streams and AntiVirus. - Vincent Nary
}
OnSaveEvent(ZipProgressEventType.Saving_BeforeRenameTempArchive);
File.Move((zss != null) ? zss.CurrentTempName : _temporaryFileName,
_name);
OnSaveEvent(ZipProgressEventType.Saving_AfterRenameTempArchive);
if (tmpName != null)
{
try
{
// not critical
if (File.Exists(tmpName))
{
File.Delete(tmpName);
}
}
catch
{
// don't care about exceptions here.
}
}
_fileAlreadyExists = true;
}
NotifyEntriesSaveComplete(c);
OnSaveCompleted();
_JustSaved = true;
}
// workitem 5043
finally
{
CleanupAfterSaveOperation();
}
return;
}