void _handler_InsteonTrafficDetected(object sender, InsteonTrafficEventArgs e)
{
}
//public void ParseCommand(byte[] commandBytes)
//{
// //if (commandBytes.Length < 5)
// //{
// // log.Error(string.Format("Received command not of sufficient length ({0}), command: {1}", commandBytes.Length, BytesToString(commandBytes)));
// // return;
// //}
// if (commandBytes[0] != 0x02)
// {
// log.Error(string.Format("Received Command must start with 0x02. Received command: {0}", BytesToString(commandBytes)));
// return;
// }
// // determine whether the command is an ack
// if (CompareToLastSentCommand(commandBytes))
// {
// // no need to parse ACK commands
// if (commandBytes[_lastSentCommand.Length] == 0x06)
// {
// if (commandBytes.Length > _lastSentCommand.Length + 1)
// {
// byte[] remainingBytes = new byte[commandBytes.Length - (_lastSentCommand.Length + 1)];
// Buffer.BlockCopy(commandBytes, _lastSentCommand.Length + 1, remainingBytes, 0, remainingBytes.Length);
// ParseCommand(remainingBytes);
// }
// _lastSentCommand = null;
// return;
// }
// else if (commandBytes[_lastSentCommand.Length] == 0x15)
// {
// log.Warn(string.Format("Received NAK for Command {0}", BytesToString(commandBytes)));
// _lastSentCommand = null;
// return;
// }
// }
// if (0x50 == commandBytes[1]) // STD message received (11 bytes)
// {
// if (commandBytes.Length < 11)
// {
// log.Error(string.Format("Bad standard command received {0}", BytesToString(commandBytes)));
// return;
// }
// byte[] singleCommand = new byte[11];
// for (int i = 0; i < 11; i++)
// {
// singleCommand[i]=commandBytes[i];
// }
// ProcessStandardReceivedMessage(singleCommand);
// if (commandBytes.Length > 11)
// {
// byte[] remainingBytes = new byte[commandBytes.Length - 11];
// Buffer.BlockCopy(commandBytes, 11, remainingBytes, 0, commandBytes.Length - 11);
// ParseCommand(remainingBytes);
// }
// }
// else if (0x51 == commandBytes[1]) // EXT message received
// {
// if (commandBytes.Length < 25)
// {
// log.Error(string.Format("Bad extended command received {0}", BytesToString(commandBytes)));
// return;
// }
// byte[] singleCommand = new byte[25];
// for (int i = 0; i < 25; i++)
// {
// singleCommand[i]=commandBytes[i];
// }
// }
//}
//public void SetLastCommand(byte[] cmd)
//{
// _lastSentCommand = cmd;
//}
private void ProcessStandardReceivedMessage(byte[] message)
{
DeviceAddress fromAddress = new DeviceAddress(message[2],message[3],message[4]);
DeviceAddress toAddress = new DeviceAddress(message[5], message[6], message[7]);
// check flags for group/device
byte flagByte = (byte)(message[8] & (byte)0xE0);
MessageFlag flag = (MessageFlag)flagByte;
string flagDescription = "unknown";
switch (flag)
{
case MessageFlag.DirectMessage:
flagDescription = "Direct Message";
break;
case MessageFlag.ACKDirectMessage:
flagDescription = "ACK Direct Message";
break;
case MessageFlag.ACKGroupCleanupDirectMessage:
flagDescription = "ACK Group Cleanup DM";
break;
case MessageFlag.BroadcastMessage:
flagDescription = "Broadcast Message";
break;
case MessageFlag.GroupBroadcastMessage:
flagDescription = "Group Broadcast Message";
break;
case MessageFlag.GroupCleanupDirectMessage:
flagDescription = "Group Cleanup DM";
break;
case MessageFlag.NAKDirectMessage:
flagDescription = "NAK Direct Message";
break;
case MessageFlag.NAKGroupCleanupDirectMessage:
flagDescription = "NAK Group Cleanup DM";
break;
default:
break;
}
if ((message[8] & 0x10) != 0) // standard message
{
log.Error(string.Format("Process Standard Received Message got extended message flag"));
return;
}
int retransmissions = (message[8] & 0x0C) >> 2;
int maxHops = message[8] & 0x03;
byte command1 = message[9];
byte command2=message[10];
string commandType = "unknown";
Device sourceDevice = FindDeviceForAddress(fromAddress.ToString());
Device targetDevice = FindDeviceForAddress(toAddress.ToString());
if (null != targetDevice && targetDevice is PLMDevice)
{
if (_gettingStatus)
{
byte delta = 0x00;
//if (_gettingOpFlags)
//{
// delta = message[10];
// sourceDevice.Delta = delta;
// log.InfoFormat("Attempting to read database delta from ops flags, result: {0}", delta);
//}
//else
//{
// read the command2 and 1 of the response to get the level as well
byte level = message[10];
delta = message[9];
sourceDevice.Status = ((int)level / 255m) * 100m;
sourceDevice.Delta = delta;
//}
_statusEventWaitHandle.Set();
}
else if (sourceDevice is ThermostatDevice)
{
if (_gettingThermostat)
{
if (command1 == 0x6A)
{
if (_gettingTemp)
{
((ThermostatDevice)sourceDevice).AmbientTemperature = (int)Math.Round(((decimal)command2) / 2m,0);
_gettingTemp = false;
}
else if (_gettingSetPoint)
{
if (((ThermostatDevice)sourceDevice).CurrentMode == ThermostatDevice.Mode.Cooling)
((ThermostatDevice)sourceDevice).CoolSetPoint = (int)Math.Round(((decimal)command2) / 2m, 0);
else
((ThermostatDevice)sourceDevice).HeatSetPoint = (int)Math.Round(((decimal)command2) / 2m, 0);
_gettingSetPoint = false;
}
else if (_gettingHumidity)
{
((ThermostatDevice)sourceDevice).Humidity = (int)command2;
_gettingHumidity = false;
}
else
log.WarnFormat("Received thermostat update {0} and unsure of what we requested.", command2.ToString("X"));
_statusEventWaitHandle.Set();
}
return;
}
ThermostatDevice thermostat = sourceDevice as ThermostatDevice;
switch (command1)
{
case Constants.STD_COMMAND_THERMOSTAT_STATUS_TEMP:
thermostat.AmbientTemperature = (int)Math.Round(((decimal)command2) * 0.5m, 0);
log.InfoFormat("Received temperature update: {0}", thermostat.AmbientTemperature);
SlapsteonEventLog.AddLogEntry(new SlapsteonEventLogEntry(thermostat.Name,
string.Format("Temperature detected: {0}°F", thermostat.AmbientTemperature)));
break;
case Constants.STD_COMMAND_THERMOSTAT_STATUS_HUMIDITY:
thermostat.Humidity = (int)command2;
log.InfoFormat("Received humidity update: {0}", thermostat.Humidity);
break;
case Constants.STD_COMMAND_THERMOSTAT_STATUS_MODE_FAN:
log.InfoFormat("Thermostat mode byte: {0}", command2.ToString("X"));
// extract mode, low byte 0=off,1=heat,2=cool,3=auto,4=program
if ((command2 & 0x0F) == 0x00)
thermostat.CurrentMode = ThermostatDevice.Mode.Off;
else if ((command2 & 0x0F) == 0x01)
thermostat.CurrentMode = ThermostatDevice.Mode.Heating;
else if ((command2 & 0x0F) == 0x02)
thermostat.CurrentMode = ThermostatDevice.Mode.Cooling;
else if ((command2 & 0x0F) == 0x03)
thermostat.CurrentMode = ThermostatDevice.Mode.Auto;
else if ((command2 & 0x0F) == 0x04)
thermostat.CurrentMode = ThermostatDevice.Mode.Program;
else
log.WarnFormat("Unable to determine mode from status byte: {0}", command2.ToString("X"));
// extract fan info, high byte command 2, 0=auto,1=alwayson
if ((command2 & 0xF0) == 0x00)
thermostat.Fan = ThermostatDevice.FanMode.Auto;
else if ((command2 & 0xF0) == 0x10)
thermostat.Fan = ThermostatDevice.FanMode.AlwaysOn;
else
log.WarnFormat("Unable to determine fan from status byte: {0}", command2.ToString("X"));
SlapsteonEventLog.AddLogEntry(new SlapsteonEventLogEntry(thermostat.Name,
string.Format("Mode: {0}, Fan: {1}", thermostat.CurrentMode, thermostat.Fan)));
break;
case Constants.STD_COMMAND_THERMOSTAT_STATUS_COOL_SET:
thermostat.CoolSetPoint = (int)(command2);
log.InfoFormat("Received thermostat cool setpoint update: {0}", thermostat.CoolSetPoint);
SlapsteonEventLog.AddLogEntry(new SlapsteonEventLogEntry(thermostat.Name,
string.Format("Cool set point: {0}", thermostat.CoolSetPoint)));
break;
case Constants.STD_COMMAND_THERMOSTAT_STATUS_HEAT_SET:
thermostat.HeatSetPoint = (int)(command2);
log.InfoFormat("Received thermostat heat setpoint update: {0}", thermostat.HeatSetPoint);
SlapsteonEventLog.AddLogEntry(new SlapsteonEventLogEntry(thermostat.Name,
string.Format("Heat set point: {0}", thermostat.HeatSetPoint)));
break;
default:
log.InfoFormat("Unknown message from thermostat device received: {0}", command1.ToString("X"));
break;
}
}
// this is received before the ALDB comes, its part of a sequence of extended messages
// but 0x2F as a standard message is LightOffAtRampRate
if (command1 == 0x2F)
{
log.Info(string.Format("Received Message from {0} to {1} of type: ({2}):{3} ({4})", GetDeviceName(fromAddress.ToString()), GetDeviceName(toAddress.ToString()), command1.ToString("X"), command2.ToString("X"), flagDescription));
log.Info("Beginning of ALDB records.");
return;
} // same as above but for reading device info
else if (command1 == 0x2E)
{
log.Info(string.Format("Received Message from {0} to {1} of type: ({2}):{3} ({4})", GetDeviceName(fromAddress.ToString()), GetDeviceName(toAddress.ToString()), command1.ToString("X"), command2.ToString("X"), flagDescription));
log.Info("Beginning of Extended Read");
return;
}
}
switch (command1)
{
case Constants.STD_COMMAND_BEEP:
break;
case Constants.STD_COMMAND_BRIGHT:
break;
case Constants.STD_COMMAND_DIM:
commandType = "Dim";
break;
case Constants.STD_COMMAND_FAST_OFF:
if (null != sourceDevice && (flag & MessageFlag.ACKDirectMessage) == 0)
{
if ((null != targetDevice && targetDevice is PLMDevice) || toAddress.Byte3 == 0x01)
{
sourceDevice.Status = 0;
sourceDevice.LastOff = DateTime.Now;
SlapsteonEventLog.AddLogEntry(new SlapsteonEventLogEntry(sourceDevice.Name,
string.Format("Fast off by keypress.")));
}
}
commandType = "FastOff";
break;
case Constants.STD_COMMAND_FAST_ON:
if (null != sourceDevice && (flag & MessageFlag.ACKDirectMessage) == 0)
{
if ((null != targetDevice && targetDevice is PLMDevice) || toAddress.Byte3 == 0x01)
{
sourceDevice.LastOn = DateTime.Now;
if (sourceDevice is DimmerDevice)
sourceDevice.Status = (command2 * 100) / 0xFF;
else
sourceDevice.Status = 100;
SlapsteonEventLog.AddLogEntry(new SlapsteonEventLogEntry(sourceDevice.Name,
string.Format("Fast on by keypress.")));
}
}
// setting a timer on an ack message is redundant
if (sourceDevice.DefaultOffMinutes.HasValue && ((flag & MessageFlag.ACKDirectMessage) != MessageFlag.ACKDirectMessage))
{
log.DebugFormat("Setting default off timer for device: {0} minutes.", sourceDevice.DefaultOffMinutes.Value);
sourceDevice.SetTimer(new Devices.DeviceTimerCallBack(DeviceTimerCallBack));
}
commandType = "FastOn";
break;
case Constants.STD_COMMAND_GET_OP_FLAGS:
break;
case Constants.STD_COMMAND_LIGHT_INSTANT_CHANGE:
break;
case Constants.STD_COMMAND_LIGHT_MANUAL_OFF:
commandType = "LightManualOff";
break;
case Constants.STD_COMMAND_LIGHT_MANUAL_ON:
commandType = "LightManualOn";
break;
case Constants.STD_COMMAND_LIGHT_RAMP_OFF:
if (null != sourceDevice && (flag & MessageFlag.ACKDirectMessage) == 0)
{
if ((null != targetDevice && targetDevice is PLMDevice) || toAddress.Byte3 == 0x01)
{
sourceDevice.Status = 0;
sourceDevice.LastOff = DateTime.Now;
}
}
commandType = "LightRampOff";
break;
case Constants.STD_COMMAND_LIGHT_RAMP_ON:
if (null != sourceDevice && (flag & MessageFlag.ACKDirectMessage) == 0)
{
if ((null != targetDevice && targetDevice is PLMDevice) || toAddress.Byte3 == 0x01)
{
sourceDevice.LastOn = DateTime.Now;
if (sourceDevice is DimmerDevice)
sourceDevice.Status = (command2 * 100) / 0xFF;
else
sourceDevice.Status = 100;
}
}
if (sourceDevice.DefaultOffMinutes.HasValue)
{
log.DebugFormat("Setting default off timer for device: {0} minutes.", sourceDevice.DefaultOffMinutes.Value);
sourceDevice.SetTimer(new DeviceTimerCallBack(DeviceTimerCallBack));
}
commandType = "LightRampOn";
break;
case Constants.STD_COMMAND_LIGHT_SET_STATUS:
commandType = "LightSetStatus";
break;
case Constants.STD_COMMAND_OFF:
if (null != sourceDevice && (flag & MessageFlag.ACKDirectMessage) == 0)
{
if ((null != targetDevice && targetDevice is PLMDevice) || toAddress.Byte3 == 0x01)
{
sourceDevice.Status = 0;
sourceDevice.LastOff = DateTime.Now;
if (!(sourceDevice is ThermostatDevice))
{
SlapsteonEventLog.AddLogEntry(new SlapsteonEventLogEntry(sourceDevice.Name,
string.Format("Turned off by keypress.")));
}
}
}
commandType = "CommandOff";
break;
case Constants.STD_COMMAND_ON:
if (null != sourceDevice && (flag & MessageFlag.ACKDirectMessage) == 0)
{
if ((null != targetDevice && targetDevice is PLMDevice) || toAddress.Byte3 == 0x01)
{
sourceDevice.LastOn = DateTime.Now;
if (sourceDevice is DimmerDevice)
sourceDevice.Status = (command2 * 100) / 0xFF;
else if (sourceDevice is SensorDevice)
sourceDevice.Status = 0;// dont actually turn on
else
sourceDevice.Status = 100;
if (!(sourceDevice is ThermostatDevice))
{
if (sourceDevice is SensorDevice)
SlapsteonEventLog.AddLogEntry(new SlapsteonEventLogEntry(sourceDevice.Name,
string.Format("Motion Detected")));
else
SlapsteonEventLog.AddLogEntry(new SlapsteonEventLogEntry(sourceDevice.Name,
string.Format("Turned on by keypress.")));
}
}
}
if (sourceDevice.DefaultOffMinutes.HasValue)
{
log.DebugFormat("Setting default off timer for device: {0} minutes.", sourceDevice.DefaultOffMinutes.Value);
sourceDevice.SetTimer(new DeviceTimerCallBack(DeviceTimerCallBack));
}
if (sourceDevice.Name == "zone1IOLinc")
{
if (null != PartyDetected)
{
PartyDetected(this);
}
}
commandType = "CommandOn";
break;
case Constants.STD_COMMAND_REMOTE_SET_BUTTON_TAP:
break;
case Constants.STD_COMMAND_SET_OP_FLAGS:
break;
case Constants.STD_COMMAND_START_MANUAL:
commandType = "StartManual";
break;
case Constants.STD_COMMAND_STATUS_REQUEST:
break;
case Constants.STD_COMMAND_STOP_MANUAL:
commandType = "StopManual";
break;
default:
break;
}
ProcessRelatedDeviceEvents(command1, command2, fromAddress, toAddress);
log.Info(string.Format("Received Message from {0} to {1} of type: {2}({3}):{4} ({5})", GetDeviceName(fromAddress.ToString()), GetDeviceName(toAddress.ToString()), commandType, command1.ToString("X"), command2.ToString("X"), flagDescription));
if (null != InsteonTrafficDetected)
{
InsteonTrafficEventArgs args = new InsteonTrafficEventArgs();
args.Source = _allDevices.ContainsKey(fromAddress.ToString()) ? _allDevices[fromAddress.ToString()] : null;
args.Destination = toAddress;
args.Flags = flag;
args.Command1 = command1;
args.Command2 = command2;
args.Description = string.Format("Command={0}/DestName={1}", commandType, GetDeviceName(toAddress.ToString()));
InsteonTrafficDetected(this, args);
}
}
public void InsteonTrafficDetected(object sender, InsteonTrafficEventArgs e)
{
this.InsertConsoleText(e.ToString() + Environment.NewLine);
}