public void Associate_Custom() //Custom Mix
{
bool bParameterSpecified = true;
ASSOC_TEST_OPTIONS customOptions;
APConfigParameter AP1Config24GHz = new APConfigParameter(0, false);
APConfigParameter AP1Config5GHz = new APConfigParameter(0, true);
APConfigParameter AP2Config24GHz = new APConfigParameter(1, false);
APConfigParameter AP2Config5GHz = new APConfigParameter(1, true);
bParameterSpecified = AP1Config24GHz.Load(sConfig.TaefTestContext) && bParameterSpecified;
bParameterSpecified = AP1Config5GHz.Load(sConfig.TaefTestContext) && bParameterSpecified;
bParameterSpecified = AP2Config24GHz.Load(sConfig.TaefTestContext) && bParameterSpecified;
bParameterSpecified = AP2Config5GHz.Load(sConfig.TaefTestContext) && bParameterSpecified;
if (!bParameterSpecified)
{
// No parameters specified. Dont run the test
return;
}
customOptions = (ASSOC_TEST_OPTIONS)sConfig.WlanTestOptions;
if (customOptions == 0)
{
customOptions = ASSOC_TEST_OPTIONS.None;
}
WhckAssociation.Associate(sConfig,
AP1Config24GHz,
AP1Config5GHz,
AP2Config24GHz,
AP2Config5GHz,
customOptions);
}
public void Associate_OPEN_WPA2_AES() //Sleep/CS and hibernate
{
APConfigParameter AP1Config24GHz = new APConfigParameter(0, false);
APConfigParameter AP1Config5GHz = new APConfigParameter(0, true);
APConfigParameter AP2Config24GHz = new APConfigParameter(1, false);
APConfigParameter AP2Config5GHz = new APConfigParameter(1, true);
//AP1 2.4 GHz
AP1Config24GHz.Auth = AuthenticationMethod.Open;
AP1Config24GHz.Cipher = EncryptionMethod.None;
AP1Config24GHz.Phy = PhyType.g;
AP1Config24GHz.Channel = 1;
//AP1 5GHz is never used
//AP2 2.4 GHz
AP2Config24GHz.Auth = AuthenticationMethod.WPA2Personal;
AP2Config24GHz.Cipher = EncryptionMethod.AES;
AP2Config24GHz.Phy = PhyType.g;
AP2Config24GHz.Channel = 11;
//AP2 5 GHz
AP2Config5GHz.Auth = AuthenticationMethod.WPA2Personal;
AP2Config5GHz.Cipher = EncryptionMethod.AES;
AP2Config5GHz.Phy = PhyType.n;
AP2Config5GHz.Channel = 36;
WhckAssociation.Associate(sConfig,
AP1Config24GHz,
AP1Config5GHz,
AP2Config24GHz,
AP2Config5GHz,
ASSOC_TEST_OPTIONS.Sleep | ASSOC_TEST_OPTIONS.Hibernate);
}
public static void Associate(RunTimeConfiguration rc,
APConfigParameter AP1Config24GHz,
APConfigParameter AP1Config5GHz,
APConfigParameter AP2Config24GHz,
APConfigParameter AP2Config5GHz,
ASSOC_TEST_OPTIONS AssocTestOptions)
{
WlanHckTestLogger traceProvider = new WlanHckTestLogger("Associate Driver");
using (UsingGroup g = new UsingGroup())
{
try
{
traceProvider.LogComment("Association Scenarios Begin");
WhckAssociation hckAssociation = new WhckAssociation(rc,
AP1Config24GHz,
AP1Config5GHz,
AP2Config24GHz,
AP2Config5GHz,
AssocTestOptions);
g.Add(hckAssociation);
//Basic Association AP1 2.4GHz -> AP2 5 GHz (2.4 GHz if 5 not supported), no sleep
hckAssociation.BasicAssociationTest();
//If requested perform advanced association tests
if (AssocTestOptions.HasFlag(ASSOC_TEST_OPTIONS.Sleep) || AssocTestOptions.HasFlag(ASSOC_TEST_OPTIONS.Hibernate))
{
hckAssociation.AdvancedAssociationTests();
}
}
catch (Exception e)
{
traceProvider.LogError("Error - " + e.Message);
throw;
}
finally
{
traceProvider.Flush();
}
}
}
public void Associate_WPA2_PSK_PEAP_AES()
{
APConfigParameter AP1Config24GHz = new APConfigParameter(0, false);
APConfigParameter AP1Config5GHz = new APConfigParameter(0, true);
APConfigParameter AP2Config24GHz = new APConfigParameter(1, false);
APConfigParameter AP2Config5GHz = new APConfigParameter(1, true);
//AP1 2.4 GHz
AP1Config24GHz.Auth = AuthenticationMethod.WPA2Personal;
AP1Config24GHz.Cipher = EncryptionMethod.AES;
AP1Config24GHz.Phy = PhyType.n;
AP1Config24GHz.Channel = 6;
//AP1 5GHz is never used
//AP2 2.4 GHz
AP2Config24GHz.Auth = AuthenticationMethod.WPA2Enterprise;
AP2Config24GHz.Cipher = EncryptionMethod.AES;
AP2Config24GHz.Phy = PhyType.n;
AP2Config24GHz.Channel = 11;
//AP2 5 GHz
AP2Config5GHz.Auth = AuthenticationMethod.WPA2Enterprise;
AP2Config5GHz.Cipher = EncryptionMethod.AES;
AP2Config5GHz.Phy = PhyType.a;
AP2Config5GHz.Channel = 157;
//Enterprise on second router.
AP2Config24GHz.EapPhase1Type = AuthServer8021X.SUPPORTED_PHASE1_TYPE.EAP_PEAP;
AP2Config24GHz.EapPhase2Type = AuthServer8021X.SUPPORTED_PHASE2_TYPE.EAP_MSCHAPV2;
AP2Config5GHz.EapPhase1Type = AuthServer8021X.SUPPORTED_PHASE1_TYPE.EAP_PEAP;
AP2Config5GHz.EapPhase2Type = AuthServer8021X.SUPPORTED_PHASE2_TYPE.EAP_MSCHAPV2;
WhckAssociation.Associate(sConfig,
AP1Config24GHz,
AP1Config5GHz,
AP2Config24GHz,
AP2Config5GHz,
ASSOC_TEST_OPTIONS.None);
}
public void Associate_OPEN_WEP_WPA_TKIP()
{
APConfigParameter AP1Config24GHz = new APConfigParameter(0, false);
APConfigParameter AP1Config5GHz = new APConfigParameter(0, true);
APConfigParameter AP2Config24GHz = new APConfigParameter(1, false);
APConfigParameter AP2Config5GHz = new APConfigParameter(1, true);
//Because WEP is not supported on 5GHz AP1 2.4 needs to be WEP and AP2 (both) needs to be WPA TKIP.
//AP1 5GHz is never used
//AP1 2.4 GHz
AP1Config24GHz.Auth = AuthenticationMethod.Open;
AP1Config24GHz.Cipher = EncryptionMethod.WEP40;
AP1Config24GHz.Phy = PhyType.b;
AP1Config24GHz.Channel = 1;
AP1Config24GHz.IsHidden = true;
//AP1 5 GHz is not used.
//AP2 2.4 GHz
AP2Config24GHz.Auth = AuthenticationMethod.WPAPersonal;
AP2Config24GHz.Cipher = EncryptionMethod.TKIP;
AP2Config24GHz.Phy = PhyType.g;
AP2Config24GHz.Channel = 11;
//AP2 5 GHz
AP2Config5GHz.Auth = AuthenticationMethod.WPAPersonal;
AP2Config5GHz.Cipher = EncryptionMethod.TKIP;
AP2Config5GHz.Phy = PhyType.a;
AP2Config5GHz.Channel = 36;
WhckAssociation.Associate(sConfig,
AP1Config24GHz,
AP1Config5GHz,
AP2Config24GHz,
AP2Config5GHz,
ASSOC_TEST_OPTIONS.None);
}
