/// <summary>
/// Updates the visuals.
/// </summary>
private void UpdateVisuals()
{
this.Children.Clear();
var frontColor = Brushes.Red;
var leftColor = Brushes.Green;
var upColor = Brushes.Blue;
var vecUp = this.ModelUpDirection;
// create left vector 90° from up
var vecLeft = new Vector3D(vecUp.Y, vecUp.Z, vecUp.X);
// change the colors if not a positive Z vector is used for up
if (vecUp.Z < 1)
{
leftColor = Brushes.Blue;
upColor = Brushes.Green;
}
var vecFront = Vector3D.CrossProduct(vecLeft, vecUp);
this.AddCubeFace(vecFront, vecUp, frontColor, this.FrontText);
this.AddCubeFace(-vecFront, vecUp, frontColor, this.BackText);
this.AddCubeFace(vecLeft, vecUp, leftColor, this.LeftText);
this.AddCubeFace(-vecLeft, vecUp, leftColor, this.RightText);
this.AddCubeFace(vecUp, vecLeft, upColor, this.TopText);
this.AddCubeFace(-vecUp, -vecLeft, upColor, this.BottomText);
var circle = new PieSliceVisual3D();
circle.BeginEdit();
circle.Center = (this.ModelUpDirection * (-this.Size / 2)).ToPoint3D();
circle.Normal = this.ModelUpDirection;
circle.UpVector = vecLeft; // rotate 90° so that it's at the bottom plane of the cube.
circle.InnerRadius = this.Size;
circle.OuterRadius = this.Size * 1.3;
circle.StartAngle = 0;
circle.EndAngle = 360;
circle.Fill = Brushes.Gray;
circle.EndEdit();
this.Children.Add(circle);
if (EnableEdgeClicks)
{
AddCorners();
AddEdges();
}
}
/// <summary>
/// The update visuals.
/// </summary>
private void UpdateVisuals()
{
this.Children.Clear();
var frontColor = Brushes.Red;
var rightColor = Brushes.Green;
var upColor = Brushes.Blue;
var up = this.ModelUpDirection;
var right = new Vector3D(0, 1, 0);
if (!up.Z.Equals(1))
{
// Y-axis up
right = new Vector3D(0, 0, 1);
rightColor = Brushes.Blue;
upColor = Brushes.Green;
}
var front = Vector3D.CrossProduct(right, up);
this.AddFace(front, up, frontColor, this.FrontText);
this.AddFace(-front, up, frontColor, this.BackText);
this.AddFace(-right, up, rightColor, this.RightText);
this.AddFace(right, up, rightColor, this.LeftText);
this.AddFace(up, right, upColor, this.TopText);
this.AddFace(-up, right, upColor, this.BottomText);
var circle = new PieSliceVisual3D();
circle.BeginEdit();
circle.Center = (this.ModelUpDirection * (-this.Size / 2)).ToPoint3D();
circle.Normal = this.ModelUpDirection;
circle.UpVector = this.ModelUpDirection.Equals(new Vector3D(0, 0, 1))
? new Vector3D(0, 1, 0)
: new Vector3D(0, 0, 1);
circle.InnerRadius = this.Size;
circle.OuterRadius = this.Size * 1.3;
circle.StartAngle = 0;
circle.EndAngle = 360;
circle.Fill = Brushes.Gray;
circle.EndEdit();
this.Children.Add(circle);
}
/// <summary>
/// Updates the visuals.
/// </summary>
private void UpdateVisuals()
{
this.Children.Clear();
faceNormals.Clear();
faceUpVectors.Clear();
CubeFaceModels.Clear();
EdgeModels.Clear();
CornerModels.Clear();
var vecUp = this.ModelUpDirection;
// create left vector 90° from up
var vecLeft = new Vector3D(vecUp.Y, vecUp.Z, vecUp.X);
var vecFront = Vector3D.CrossProduct(vecLeft, vecUp);
CubeFaceModels.Add(this.AddCubeFace(vecFront, vecUp, GetCubefaceColor(0), this.FrontText));
CubeFaceModels.Add(this.AddCubeFace(-vecFront, vecUp, GetCubefaceColor(1), this.BackText));
CubeFaceModels.Add(this.AddCubeFace(vecLeft, vecUp, GetCubefaceColor(2), this.LeftText));
CubeFaceModels.Add(this.AddCubeFace(-vecLeft, vecUp, GetCubefaceColor(3), this.RightText));
CubeFaceModels.Add(this.AddCubeFace(vecUp, vecLeft, GetCubefaceColor(4), this.TopText));
CubeFaceModels.Add(this.AddCubeFace(-vecUp, -vecLeft, GetCubefaceColor(5), this.BottomText));
var circle = new PieSliceVisual3D();
circle.BeginEdit();
circle.Center = (this.ModelUpDirection * (-this.Size / 2)).ToPoint3D();
circle.Normal = this.ModelUpDirection;
circle.UpVector = vecLeft; // rotate 90° so that it's at the bottom plane of the cube.
circle.InnerRadius = this.Size;
circle.OuterRadius = this.Size * 1.3;
circle.StartAngle = 0;
circle.EndAngle = 360;
circle.Fill = Brushes.Gray;
circle.EndEdit();
this.Children.Add(circle);
AddCorners();
AddEdges();
EnableDisableEdgeClicks();
}
/// <summary>
/// Updates the visuals.
/// </summary>
private void UpdateVisuals()
{
this.Children.Clear();
var frontColor = Brushes.Red;
var leftColor = Brushes.Green;
var upColor = Brushes.Blue;
var vecUp = this.ModelUpDirection;
// create left vector 90° from up
var vecLeft = new Vector3D(vecUp.Y, vecUp.Z, vecUp.X);
// change the colors if not a positive Z vector is used for up
if (vecUp.Z < 1)
{
leftColor = Brushes.Blue;
upColor = Brushes.Green;
}
var vecFront = Vector3D.CrossProduct(vecLeft, vecUp);
this.AddCubeFace(vecFront, vecUp, frontColor, this.FrontText);
this.AddCubeFace(-vecFront, vecUp, frontColor, this.BackText);
this.AddCubeFace(vecLeft, vecUp, leftColor, this.LeftText);
this.AddCubeFace(-vecLeft, vecUp, leftColor, this.RightText);
this.AddCubeFace(vecUp, vecLeft, upColor, this.TopText);
this.AddCubeFace(-vecUp, -vecLeft, upColor, this.BottomText);
var circle = new PieSliceVisual3D();
circle.BeginEdit();
circle.Center = (this.ModelUpDirection * (-this.Size / 2)).ToPoint3D();
circle.Normal = this.ModelUpDirection;
circle.UpVector = vecLeft; // rotate 90° so that it's at the bottom plane of the cube.
circle.InnerRadius = this.Size;
circle.OuterRadius = this.Size * 1.3;
circle.StartAngle = 0;
circle.EndAngle = 360;
circle.Fill = Brushes.Gray;
circle.EndEdit();
this.Children.Add(circle);
if (EnableEdgeClicks)
{
AddCorners();
AddEdges();
}
}
/// <summary>
/// Updates the visuals.
/// </summary>
private void UpdateVisuals()
{
this.Children.Clear();
var frontColor = Brushes.Red;
var rightColor = Brushes.Green;
var upColor = Brushes.Blue;
var up = this.ModelUpDirection;
var right = new Vector3D(0, 1, 0);
if (up.Z < 1)
{
right = new Vector3D(0, 0, 1);
rightColor = Brushes.Blue;
upColor = Brushes.Green;
}
var front = Vector3D.CrossProduct(right, up);
this.AddCubeFace(front, up, frontColor, this.FrontText);
this.AddCubeFace(-front, up, frontColor, this.BackText);
this.AddCubeFace(right, up, rightColor, this.RightText);
this.AddCubeFace(-right, up, rightColor, this.LeftText);
this.AddCubeFace(up, right, upColor, this.TopText);
this.AddCubeFace(-up, -right, upColor, this.BottomText);
var circle = new PieSliceVisual3D();
circle.BeginEdit();
circle.Center = (this.ModelUpDirection * (-this.Size / 2)).ToPoint3D();
circle.Normal = this.ModelUpDirection;
circle.UpVector = this.ModelUpDirection.Equals(new Vector3D(0, 0, 1))
? new Vector3D(0, 1, 0)
: new Vector3D(0, 0, 1);
circle.InnerRadius = this.Size;
circle.OuterRadius = this.Size * 1.3;
circle.StartAngle = 0;
circle.EndAngle = 360;
circle.Fill = Brushes.Gray;
circle.EndEdit();
this.Children.Add(circle);
}