private InfoForMate FindMinTopTable(LinkedList<Component2> swComponents, Component2 swAddedComp, bool? isLeft)
{
bool status;
InfoForMate minDistance = new InfoForMate(double.MaxValue, null, null);
InfoForMate currentDistance1 = null, currentDistance2 = null;
foreach (Component2 component in swComponents)
{
bool isAnglePart, isUpPart, isTabletop, isKtExist;
var swCompModel = (ModelDoc2)component.GetModelDoc();
if (swCompModel == null)
continue;
isKtExist = GetTypeProperty(swCompModel.GetCustomInfoValue("", "KitchenType"), out isAnglePart, out isUpPart, out isTabletop);
if (!isKtExist)
continue;
if (isUpPart || !isTabletop)
continue;
if (component.Name == swAddedComp.Name)
continue;
swModel.ClearSelection();
//пересекает ли эта столешница столешницу к которой мы хотим прикрепится.
bool isIntersect = false;
status = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", "#swrfЗадняя", swAddedComp.Name, rootName), "PLANE", 0, 0, 0, false, 0, null, 0);
status = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", plateleft, component.Name, rootName), "PLANE", 0, 0, 0, true, 0, null, 0);
measure.Calculate(null);
isIntersect = (measure.NormalDistance <= 0.002 && measure.NormalDistance != -1) || measure.IsIntersect;
if (!isIntersect)
{
swModel.ClearSelection();
status = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", "#swrfЗадняя", swAddedComp.Name, rootName), "PLANE", 0, 0, 0, false, 0, null, 0);
status = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", plateright, component.Name, rootName), "PLANE", 0, 0, 0, true, 0, null, 0);
measure.Calculate(null);
isIntersect = (measure.NormalDistance <= 0.002 && measure.NormalDistance != -1) || measure.IsIntersect;
}
if (!isIntersect)
continue;
swModel.ClearSelection();
status = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", plateleft, swAddedComp.Name, rootName), "PLANE", 0, 0, 0, false, 0, null, 0);
status = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", "#swrfПередняя", component.Name, rootName), "PLANE", 0, 0, 0, true, 0, null, 0);
measure.Calculate(null);
if (minDistance.distance > measure.Distance && measure.Distance != -1 && measure.IsParallel)
currentDistance1 = new InfoForMate(measure.Distance, component.FeatureByName("#swrfПередняя"), swAddedComp.FeatureByName(plateright));
swModel.ClearSelection();
status = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", plateright, swAddedComp.Name, rootName), "PLANE", 0, 0, 0, false, 0, null, 0);
status = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", "#swrfПередняя", component.Name, rootName), "PLANE", 0, 0, 0, true, 0, null, 0);
measure.Calculate(null);
if (minDistance.distance > measure.Distance && measure.Distance != -1 && measure.IsParallel)
currentDistance2 = new InfoForMate(measure.Distance, component.FeatureByName("#swrfПередняя"), swAddedComp.FeatureByName(plateleft));
if (currentDistance1 != null && currentDistance2 != null)
{
if ((bool)isLeft && currentDistance1.distance > currentDistance2.distance)
minDistance = currentDistance1;
else if (!(bool)isLeft && currentDistance1.distance < currentDistance2.distance)
minDistance = currentDistance2;
}
else
{
if (currentDistance1 != null)
minDistance = currentDistance1;
if (currentDistance2 != null)
minDistance = currentDistance2;
}
}
return minDistance;
}
private InfoForMate FindMaxPlate(LinkedList<Component2> swComponents, Component2 swAddedComp, Component2 firstComponent, double origaverx, double origaverz, bool isAnglePartFirst, bool? isLeft)
{
InfoForMate maxDistance = new InfoForMate(double.MinValue, null, null);
bool status;
string firstPlateLeft = plateleft;
string firstPlateRight = plateright;
if (isAnglePartFirst)
{
firstPlateLeft = "#swrfЗадняя2";
firstPlateRight = "#swrfЗадняя2";
}
InfoForMate currentDistance1 = null, currentDistance2 = null;
bool isAnglePart, isUpPart, isTabletop, isKtExist;
foreach (Component2 component in swComponents)
{
currentDistance1 = null;
currentDistance2 = null;
var swCompModel = (ModelDoc2)component.GetModelDoc();
if (swCompModel == null)
continue;
isKtExist = GetTypeProperty(swCompModel.GetCustomInfoValue("", "KitchenType"), out isAnglePart, out isUpPart, out isTabletop);
if (!isKtExist)
continue;
if (isUpPart || isTabletop)
continue;
if (component.Name == swAddedComp.Name)
continue;
//if (component.Name == firstComponent.Name)
// continue;
swModel.ClearSelection();
//сначала проверка на удаленность
/*double[] currentBox = component.GetBox(true, true);
double averx = Math.Min(currentBox[3], currentBox[0]) +
Math.Abs(currentBox[3] - currentBox[0]) / 2;
double averz = Math.Min(currentBox[5], currentBox[2]) +
Math.Abs(currentBox[5] - currentBox[2]) / 2;
double a = Math.Abs(averx - origaverx);
double b = Math.Abs(averz - origaverz);
double c = Math.Sqrt(a * a + b * b) * 1000;
if (c > 4000)
continue;*/
swModel.ClearSelection();
//тут проверить что она у той же стенки
string swrfBackAngle = "#swrfЗадняя2";
if (component.Name != firstComponent.Name)
{
status = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", "#swrfЗадняя", firstComponent.Name, rootName), "PLANE", 0, 0, 0, false, 0, null, 0);
status = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", "#swrfЗадняя", component.Name, rootName), "PLANE", 0, 0, 0, true, 0, null, 0);
measure.Calculate(null);
if ((!measure.IsIntersect || !measure.IsParallel) && !isAnglePart)
continue;
if (isAnglePart && (!measure.IsParallel || !measure.IsIntersect))
{
swModel.ClearSelection();
status = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", "#swrfЗадняя", firstComponent.Name, rootName), "PLANE", 0, 0, 0, false, 0, null, 0);
status = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", swrfBackAngle, component.Name, rootName), "PLANE", 0, 0, 0, true, 0, null, 0);
measure.Calculate(null);
if (!measure.IsIntersect || !measure.IsParallel)
continue;
else
swrfBackAngle = "#swrfЗадняя";
}
}
swModel.ClearSelection();
status = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", firstPlateLeft, firstComponent.Name, rootName), "PLANE", 0, 0, 0, false, 0, null, 0);
status = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", plateright, component.Name, rootName), "PLANE", 0, 0, 0, true, 0, null, 0);
measure.Calculate(null);
if (!measure.IsParallel && !isAnglePart)
continue;
if (isAnglePart) //&& !measure.IsParallel)
{
swModel.ClearSelection();
status = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", firstPlateLeft, firstComponent.Name, rootName), "PLANE", 0, 0, 0, false, 0, null, 0);
status = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", swrfBackAngle, component.Name, rootName), "PLANE", 0, 0, 0, true, 0, null, 0);
measure.Calculate(null);
if (measure.Distance != -1 && measure.IsParallel)
currentDistance1 = new InfoForMate(measure.Distance, component.FeatureByName(swrfBackAngle), firstComponent.FeatureByName(firstPlateLeft));
}
else
{
//if (measure.Distance != -1)
currentDistance1 = new InfoForMate(measure.Distance, component.FeatureByName(plateright),
firstComponent.FeatureByName(firstPlateLeft));
}
swModel.ClearSelection();
status = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", firstPlateRight, firstComponent.Name, rootName), "PLANE", 0, 0, 0, false, 0, null, 0);
status = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", plateleft, component.Name, rootName), "PLANE", 0, 0, 0, true, 0, null, 0);
measure.Calculate(null);
if (!measure.IsParallel && !isAnglePart)
continue;
if (isAnglePart) //&& !measure.IsParallel)
{
swModel.ClearSelection();
status = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", firstPlateRight, firstComponent.Name, rootName), "PLANE", 0, 0, 0, false, 0, null, 0);
status = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", swrfBackAngle, component.Name, rootName), "PLANE", 0, 0, 0, true, 0, null, 0);
measure.Calculate(null);
if (measure.Distance != -1 && measure.IsParallel)
currentDistance2 = new InfoForMate(measure.Distance, component.FeatureByName(swrfBackAngle),
firstComponent.FeatureByName(firstPlateRight));
}
else
{
//if (measure.Distance != -1)
currentDistance2 = new InfoForMate(measure.Distance, component.FeatureByName(plateleft),
firstComponent.FeatureByName(firstPlateRight));
}
if (component.Name == firstComponent.Name)
{
if ((bool)isLeft)
{
if (currentDistance1 != null && maxDistance.distance < currentDistance1.distance)
maxDistance = currentDistance1;
}
else
{
if (currentDistance1 != null && maxDistance.distance < currentDistance2.distance)
maxDistance = currentDistance2;
}
}
else
{
if (currentDistance1 != null && currentDistance2 != null)
{
if ((bool)isLeft && currentDistance1.distance >= currentDistance2.distance && maxDistance.distance < currentDistance1.distance)
maxDistance = currentDistance1;
else if (!(bool)isLeft && currentDistance1.distance <= currentDistance2.distance && maxDistance.distance < currentDistance2.distance)
maxDistance = currentDistance2;
}
else
{
if (currentDistance1 != null && maxDistance.distance < currentDistance1.distance)
maxDistance = currentDistance1;
if (currentDistance2 != null && maxDistance.distance < currentDistance2.distance)
maxDistance = currentDistance2;
}
}
}
return maxDistance;
}
public InfoForMate GetSimilarTables(Component2 swComp2, bool isUpPart, bool isAnglePartOrig)
{
var swComponents = new LinkedList<Component2>();
InfoForMate minDistance = new InfoForMate(double.MaxValue, null, null);
string origplateright = plateright;
string origplateleft = plateleft;
if (isAnglePartOrig)
{
origplateright = "#swrfПраваяЗадняя";
origplateleft = "#swrfЛеваяЗадняя";
}
if (swAddin.GetComponents(swRootComponent, swComponents, false, false))
{
double[] origBox = swComp2.GetBox(true, true);
double origaverx = Math.Min(origBox[3], origBox[0]) + Math.Abs(origBox[3] - origBox[0]) / 2;
double origaverz = Math.Min(origBox[5], origBox[2]) + Math.Abs(origBox[5] - origBox[2]) / 2;
foreach (Component2 component in swComponents)
{
bool isAnglePart, isDistUpPart, isTabletop, isKtExist;
var swCompModel = (ModelDoc2)component.GetModelDoc();
if (swCompModel == null)
continue;
isKtExist = GetTypeProperty(swCompModel.GetCustomInfoValue("", "KitchenType"), out isAnglePart, out isDistUpPart, out isTabletop);
if (!isKtExist)
continue;
if (isTabletop)
continue;
if (isDistUpPart != isUpPart)
continue;
double[] currentBox = component.GetBox(true, true);
double averx = Math.Min(currentBox[3], currentBox[0]) + Math.Abs(currentBox[3] - currentBox[0]) / 2;
double averz = Math.Min(currentBox[5], currentBox[2]) + Math.Abs(currentBox[5] - currentBox[2]) / 2;
double a = Math.Abs(averx - origaverx);
double b = Math.Abs(averz - origaverz);
double c = Math.Sqrt(a * a + b * b) * 1000;
if (c > 4000)
continue;
string compName = component.Name2;
if (compName.Contains("Замер") || compName == swComp2.Name)
continue;
bool bb = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", "#swrfЗадняя", compName, rootName), "PLANE", 0, 0, 0, false, 0, null, 0);
bb = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", "#swrfЗадняя", swComp2.Name, rootName), "PLANE", 0, 0, 0, true, 0, null, 0);
measure.Calculate(null);
if (!(measure.IsIntersect && measure.IsParallel))
{
if (isAnglePart)
{
bb = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", "#swrfЗадняя2", compName, rootName), "PLANE", 0, 0, 0, false, 0, null, 0);
bb = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", "#swrfЗадняя", swComp2.Name, rootName), "PLANE", 0, 0, 0, true, 0, null, 0);
measure.Calculate(null);
if (!(measure.IsIntersect && measure.IsParallel))
continue;
}
else
continue;
}
swModel.ClearSelection();
bb = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", plateright, compName, rootName), "PLANE", 0, 0, 0, false, 0, null, 0);
bb = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", origplateleft, swComp2.Name, rootName), "PLANE", 0, 0, 0, true, 0, null, 0);
measure.Calculate(null);
if (!measure.IsParallel && !isAnglePart)
continue;
if (minDistance.distance > measure.Distance && measure.IsParallel)
{
minDistance = new InfoForMate(measure.Distance, component.FeatureByName(plateright), swComp2.FeatureByName(origplateleft));
if (isAnglePart)
{
swModel.ClearSelection();
bb = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", plateright, compName, rootName), "PLANE", 0, 0, 0, false, 0, null, 0);
bb = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", origplateright, swComp2.Name, rootName), "PLANE", 0, 0, 0, true, 0, null, 0);
measure.Calculate(null);
if (minDistance.distance > measure.Distance && measure.IsParallel)
{
minDistance = new InfoForMate(measure.Distance, component.FeatureByName(plateright), swComp2.FeatureByName(origplateright));
}
}
}
bb = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", plateleft, compName, rootName), "PLANE", 0, 0, 0, false, 0, null, 0);
bb = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", origplateright, swComp2.Name, rootName), "PLANE", 0, 0, 0, true, 0, null, 0);
measure.Calculate(null);
if (!measure.IsParallel)
continue;
if (minDistance.distance > measure.Distance)
{
minDistance = new InfoForMate(measure.Distance, component.FeatureByName(plateleft), swComp2.FeatureByName(origplateright));
if (isAnglePart)
{
swModel.ClearSelection();
bb = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", plateleft, compName, rootName), "PLANE", 0, 0, 0, false, 0, null, 0);
bb = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", origplateleft, swComp2.Name, rootName), "PLANE", 0, 0, 0, true, 0, null, 0);
measure.Calculate(null);
if (minDistance.distance > measure.Distance && measure.IsParallel)
{
minDistance = new InfoForMate(measure.Distance, component.FeatureByName(plateleft), swComp2.FeatureByName(origplateleft));
}
}
}
}
}
return minDistance;
}
public void TableTopProcess(Component2 swAddedComp)
{
var mates = swAddedComp.GetMates();
Component2 firstComponent = null;
var swAddedCompModel = (ModelDoc2)swAddedComp.GetModelDoc();
bool? isLeft = null;
if (swAddedCompModel.GetCustomInfoValue("", "KitchenType").Contains("левая"))
isLeft = true;
else if (swAddedCompModel.GetCustomInfoValue("", "KitchenType").Contains("правая"))
isLeft = false;
if (isLeft == null)
return;
if (mates != null)
{
foreach (var mate in mates)
{
if (mate is Mate2)
{
var spec = (Mate2)mate;
int mec = spec.GetMateEntityCount();
if (mec > 1)
{
for (int ik = 0; ik < mec; ik++)
{
MateEntity2 me = spec.MateEntity(ik);
if (me.ReferenceComponent.Name.Contains(swAddedComp.Name))
{
string firstComp = spec.MateEntity(0).ReferenceComponent.Name.Split('/')[0];
swAddin.GetComponentByName(RootModel, firstComp, false, out firstComponent);
break;
}
}
}
}
}
}
if (firstComponent != null)
{
//привязать...
swAddin.AddMate(RootModel, firstComponent.FeatureByName("#swrfЗадняя"), swAddedComp.FeatureByName("#swrfЗадняя"), true);
}
bool status;
var swComponents = new LinkedList<Component2>();
if (swAddin.GetComponents(swRootComponent, swComponents, false, false))
{
double[] origBox = swAddedComp.GetBox(true, true);
double origaverx = Math.Min(origBox[3], origBox[0]) +
Math.Abs(origBox[3] - origBox[0]) / 2;
double origaverz = Math.Min(origBox[5], origBox[2]) +
Math.Abs(origBox[5] - origBox[2]) / 2;
var swCompModel = (ModelDoc2)firstComponent.GetModelDoc();
bool isAnglePartFirst = false, isUpPartfirst = false, isTabletopFirst = false;
if (swCompModel != null)
GetTypeProperty(swCompModel.GetCustomInfoValue("", "KitchenType"), out isAnglePartFirst, out isUpPartfirst, out isTabletopFirst);
if (isTabletopFirst || isUpPartfirst)
return;
string tmp = (bool)isLeft ? "#swrfЛевая" : "#swrfПравая";
if (isAnglePartFirst)
swAddin.AddMate(RootModel, firstComponent.FeatureByName("#swrfЗадняя2"), swAddedComp.FeatureByName(tmp), true);
else
swAddin.AddMate(RootModel, firstComponent.FeatureByName(tmp), swAddedComp.FeatureByName(tmp), true);
InfoForMate maxDistance = FindMinTopTable(swComponents, swAddedComp, isLeft);
InfoForMate maxDistance3 = FindMaxPlate(swComponents, swAddedComp, firstComponent, origaverx, origaverz, isAnglePartFirst, isLeft);
if (maxDistance.planeDist != null && maxDistance.planeSource != null && maxDistance3.distance > maxDistance.distance)//&& maxDistance3.planeSource.Name == maxDistance.planeSource.Name)
{
swModel.ClearSelection();
InfoForMate maxDistance2 = new InfoForMate(double.MinValue, null, null);
string tt = isAnglePartFirst ? "#swrfЗадняя2" : plateleft;
status = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", tt, firstComponent.Name, rootName), "PLANE", 0, 0, 0, false, 0, null, 0);
maxDistance.planeDist.Select(true);
measure.Calculate(null);
if (measure.IsParallel && maxDistance2.distance < measure.Distance)
maxDistance2 = new InfoForMate(measure.Distance, firstComponent.FeatureByName(tt), null);
swModel.ClearSelection();
status = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", plateright, firstComponent.Name, rootName), "PLANE", 0, 0, 0, false, 0, null, 0);
maxDistance.planeDist.Select(true);
measure.Calculate(null);
if (measure.IsParallel && maxDistance2.distance < measure.Distance)
maxDistance2 = new InfoForMate(measure.Distance, firstComponent.FeatureByName(plateright), null);
//if (maxDistance2.planeDist!=null)
// swAddin.AddMate(swModel, maxDistance2.planeDist, maxDistance.planeSource, true);//distToTopTable = new InfoForMate(maxDistance.distance, maxDistance2.planeDist, maxDistance.planeSource);//
swModel.ClearSelection();
maxDistance.planeDist.Select(false);
maxDistance2.planeDist.Select(true);
measure.Calculate(null);
maxDistance.distance = measure.Distance;
}
else
{
maxDistance = maxDistance3;//maxDistance = FindMaxPlate(swComponents, swAddedComp, firstComponent, origaverx, origaverz,isAnglePartFirst);
//if (maxDistance.planeDist != null && maxDistance.planeSource != null)
//{
// if (maxDistance.planeSource.Name != "#swrfЗадняя2")
// swAddin.AddMate(swModel, maxDistance.planeSource, swAddedComp.FeatureByName(maxDistance.planeSource.Name), true);
// else
// {
// maxDistance.planeSource.Select(false);
// swAddedComp.FeatureByName(plateleft).Select(true);
// measure.Calculate(null);
// double distanceleft = measure.Distance;
// maxDistance.planeSource.Select(false);
// swAddedComp.FeatureByName(plateright).Select(true);
// measure.Calculate(null);
// double distanceright = measure.Distance;
// if (distanceleft<distanceright)
// swAddin.AddMate(swModel, maxDistance.planeSource, swAddedComp.FeatureByName(plateleft), true);
// else
// swAddin.AddMate(swModel, maxDistance.planeSource, swAddedComp.FeatureByName(plateright), true);
// }
//}
}
double distance2;
swModel.ClearSelection();
if (!isAnglePartFirst)
status = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", "Передняя", firstComponent.Name, rootName), "PLANE", 0, 0, 0, false, 0, null, 0);
else
status = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", plateleft, firstComponent.Name, rootName), "PLANE", 0, 0, 0, false, 0, null, 0);
status = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", "#swrfЗадняя", firstComponent.Name, rootName), "PLANE", 0, 0, 0, true, 0, null, 0);
measure.Calculate(null);
distance2 = measure.Distance * 1000;
//поменять размер..
var curModel = swAddedComp.GetModelDoc2();
bool isNumber = false;
OleDbConnection oleDb;
OleDbDataReader rd;
List<string> strObjNames = new List<string>();
string filePath = swAddedComp.GetPathName();
if (swAddin.OpenModelDatabase(curModel, out oleDb))
{
using (oleDb)
{
OleDbCommand cm;
cm = isNumber
? new OleDbCommand(
"SELECT * FROM objects WHERE number>0 ORDER BY number",
oleDb)
: new OleDbCommand("SELECT * FROM objects ORDER BY id", oleDb);
rd = cm.ExecuteReader();
while (rd.Read())
{
if (rd["caption"].ToString() == null || rd["caption"].ToString() == "" ||
rd["caption"].ToString().Trim() == "")
continue;
string strObjName = rd["name"].ToString();
if (filePath.Contains("_SWLIB_BACKUP"))
{
string pn = Path.GetFileNameWithoutExtension(filePath);
string last3 = pn.Substring(pn.Length - 4, 4);
string[] arr = strObjName.Split('@');
if (arr.Length != 3)
throw new Exception("что-то не так");
arr[2] = Path.GetFileNameWithoutExtension(arr[2]) + last3 + Path.GetExtension(arr[2]);
strObjName = string.Format("{0}@{1}@{2}", arr[0], arr[1], arr[2]);
}
strObjNames.Add(strObjName);
}
}
}
swAddin.SetObjectValue(curModel, strObjNames[0], 14, maxDistance.distance * 1000);
swAddin.SetObjectValue(curModel, strObjNames[1], 14, distance2);
}
}
public InfoForMate GetPointsMate(Component2 swComp2, Component2 mainComponent, bool isAnglePartOrig)
{
bool status = false;
InfoForMate minDistance = new InfoForMate(double.MaxValue, null, null);
//status = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", plateleft, swComp2.Name, rootName), "PLANE", 0, 0, 0, false, 0, null, 0);
//status = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", plateright, swComp2.Name, rootName), "PLANE", 0, 0, 0, true, 0, null, 0);
//measure.Calculate(null);
List<string> goodPoints = new List<string>();
for (int i = 1; i < 40; i++)
{
status = RootModel.Extension.SelectByID2(string.Format("Точка{0}@{1}@{2}", i.ToString(), mainComponent.Name, rootName), "DATUMPOINT", 0, 0, 0, false, 0, null, 0);
if (!status)
{
if (RootModel.Extension.SelectByID2(string.Format("Точка{0}@{1}@{2}", (i + 1).ToString(), mainComponent.Name, rootName), "DATUMPOINT", 0, 0, 0, false, 0, null, 0))
continue;
else
break;
}
status = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", "#swrfЗадняя", swComp2.Name, rootName), "PLANE", 0, 0, 0, true, 0, null, 0);
measure.Calculate(null);
if (measure.IsIntersect || measure.NormalDistance < 0.00001)
goodPoints.Add(string.Format("Точка{0}@{1}@{2}", i.ToString(), mainComponent.Name, rootName));
}
minDistance = new InfoForMate(double.MaxValue, null, null);
foreach (var point in goodPoints)
{
if (isAnglePartOrig)
{
status = RootModel.Extension.SelectByID2(point, "DATUMPOINT", 0, 0, 0, false, 0, null, 0);
status = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", "#swrfЗадняя2", swComp2.Name, rootName), "PLANE", 0, 0, 0, true, 0, null, 0);
measure.Calculate(null);
if (measure.Distance != -1)
{
if (measure.Distance < minDistance.distance)
minDistance = new InfoForMate(measure.Distance, mainComponent.FeatureByName(point.Split('@')[0]), swComp2.FeatureByName("#swrfЗадняя2"));
}
}
else
{
status = RootModel.Extension.SelectByID2(point, "DATUMPOINT", 0, 0, 0, false, 0, null, 0);
status = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", plateleft, swComp2.Name, rootName), "PLANE", 0, 0, 0, true, 0, null, 0);
measure.Calculate(null);
if (measure.Distance != -1)
{
if (measure.Distance < minDistance.distance)
minDistance = new InfoForMate(measure.Distance, mainComponent.FeatureByName(point.Split('@')[0]), swComp2.FeatureByName(plateleft));
}
RootModel.ClearSelection();
status = RootModel.Extension.SelectByID2(point, "DATUMPOINT", 0, 0, 0, false, 0, null, 0);
status = RootModel.Extension.SelectByID2(string.Format("{0}@{1}@{2}", plateright, swComp2.Name, rootName), "PLANE", 0, 0, 0, true, 0, null, 0);
measure.Calculate(null);
if (measure.Distance != -1)
{
if (measure.Distance < minDistance.distance)
minDistance = new InfoForMate(measure.Distance, mainComponent.FeatureByName(point.Split('@')[0]), swComp2.FeatureByName(plateright));
}
}
}
return minDistance;
}