// Read through a section of CFWS. If we reach the end of the data string then throw because not enough of the
// MailAddress components were found.
private static int ReadCfwsAndThrowIfIncomplete(string data, int index)
{
index = WhitespaceReader.ReadCfwsReverse(data, index);
if (index < 0)
{
// More components were expected. Incomplete address, invalid
throw new FormatException(string.Format(SR.MailAddressInvalidFormat));
}
return(index);
}
// Parses the display-name section of an address. In departure from the RFC, we attempt to read data in the
// quoted-string format even if the bounding quotes are omitted. We also permit Unicode, which the RFC does
// not allow for.
// e.g. ("display name" <user@domain>) or (display name <user@domain>)
//
// Preconditions:
//
// Postconditions:
// - data[index] should refer to the comma ',' separator, if any
// - index == -1 if the beginning of the data string has been reached.
// - returns the parsed display-name, excluding any bounding quotes around quoted-strings
//
// Throws a FormatException:
// - For invalid un-escaped chars, except Unicode
// - If the postconditions cannot be met.
private static string ParseDisplayName(string data, ref int index, bool expectMultipleAddresses)
{
string displayName;
// Whatever is left over must be the display name. The display name should be a single word/atom or a
// quoted string, but for robustness we allow the quotes to be omitted, so long as we can find the comma
// separator before the next address.
// Read the comment (if any). If the display name is contained in quotes, the surrounding comments are
// omitted. Otherwise, mark this end of the comment so we can include it as part of the display name.
int firstNonCommentIndex = WhitespaceReader.ReadCfwsReverse(data, index);
// Check to see if there's a quoted-string display name
if (firstNonCommentIndex >= 0 && data[firstNonCommentIndex] == MailBnfHelper.Quote)
{
// The preceding comment was not part of the display name. Read just the quoted string.
index = QuotedStringFormatReader.ReadReverseQuoted(data, firstNonCommentIndex, true);
Debug.Assert(data[index + 1] == MailBnfHelper.Quote, "Mis-alligned index: " + index);
// Do not include the bounding quotes on the display name
int leftIndex = index + 2;
displayName = data.Substring(leftIndex, firstNonCommentIndex - leftIndex);
// Skip any CFWS after the display name
index = WhitespaceReader.ReadCfwsReverse(data, index);
// Check for completion. We are valid if we hit the end of the data string or if the rest of the data
// belongs to another address.
if (index >= 0 && !(expectMultipleAddresses && data[index] == MailBnfHelper.Comma))
{
// If there was still data, only a comma could have been the next valid character
throw new FormatException(string.Format(SR.MailHeaderFieldInvalidCharacter, data[index]));
}
}
else
{
// The comment (if any) should be part of the display name.
int startingIndex = index;
// Read until the dividing comma or the end of the line.
index = QuotedStringFormatReader.ReadReverseUnQuoted(data, index, true, expectMultipleAddresses);
Debug.Assert(index < 0 || data[index] == MailBnfHelper.Comma, "Mis-alligned index: " + index);
// Do not include the Comma (if any)
displayName = data.Substring(index + 1, startingIndex - index);
// Because there were no bounding quotes, trim extra whitespace
displayName = displayName.Trim();
}
return(NormalizeOrThrow(displayName));
}
//
// This method reads a standard quoted string. Departing from the RFC, Unicode is permitted for display-name.
//
// Preconditions:
// - Index must be within the bounds of the data string.
// - The char at the given index is the initial quote. (data[index] == Quote)
//
// Return value: The next index past the terminating-quote (data[index + 1] == Quote).
// e.g. In (bob "user name"@domain), starting at index=14 (") returns index=3 (space).
//
// A FormatException will be thrown if:
// - A non-escaped character is encountered that is not valid in a quoted string.
// - A Unicode character is encountered and Unicode has not been allowed.
// - The final double quote is not found.
//
internal static int ReadReverseQuoted(string data, int index, bool permitUnicode)
{
Debug.Assert(0 <= index && index < data.Length, "Index out of range: " + index + ", " + data.Length);
// Check for the first bounding quote
Debug.Assert(data[index] == MailBnfHelper.Quote, "Initial char at index " + index + " was not a quote.");
// Skip the bounding quote
index--;
do
{
// Check for valid whitespace
index = WhitespaceReader.ReadFwsReverse(data, index);
if (index < 0)
{
break;
}
// Check for escaped characters
int quotedCharCount = QuotedPairReader.CountQuotedChars(data, index, permitUnicode);
if (quotedCharCount > 0)
{
// Skip quoted pairs
index = index - quotedCharCount;
}
// Check for the terminating quote
else if (data[index] == MailBnfHelper.Quote)
{
// Skip the final bounding quote
return(index - 1);
}
// Check invalid characters
else if (!IsValidQtext(permitUnicode, data[index]))
{
throw new FormatException(string.Format(SR.MailHeaderFieldInvalidCharacter, data[index]));
}
// Valid char
else
{
index--;
}
}while (index >= 0);
// We started with a quote, but did not end with one
throw new FormatException(string.Format(SR.MailHeaderFieldInvalidCharacter, MailBnfHelper.Quote));
}
//
// Reads a domain literal in reverse
//
// Preconditions:
// - Index must be within the bounds of the data string.
// - The char at the given index is the initial bracket. (data[index] == EndSquareBracket)
//
// Return value:
// - The next index past the terminating bracket (data[index + 1] == StartSquareBracket).
// e.g. In (user@[domain]), starting at index=12 (]) returns index=4 (@).
//
// A FormatException will be thrown if:
// - A non-escaped character is encountered that is not valid in a domain literal, including Unicode.
// - The final bracket is not found.
//
internal static int ReadReverse(string data, int index)
{
Debug.Assert(0 <= index && index < data.Length, "index was outside the bounds of the string: " + index);
Debug.Assert(data[index] == MailBnfHelper.EndSquareBracket, "data did not end with a square bracket");
// Skip the end bracket
index--;
do
{
// Check for valid whitespace
index = WhitespaceReader.ReadFwsReverse(data, index);
if (index < 0)
{
break;
}
// Check for escaped characters
int quotedCharCount = QuotedPairReader.CountQuotedChars(data, index, false);
if (quotedCharCount > 0)
{
// Skip quoted pairs
index = index - quotedCharCount;
}
// Check for the terminating bracket
else if (data[index] == MailBnfHelper.StartSquareBracket)
{
// We're done parsing
return(index - 1);
}
// Check for invalid characters
else if (data[index] > MailBnfHelper.Ascii7bitMaxValue || !MailBnfHelper.Dtext[data[index]])
{
throw new FormatException(string.Format(SR.MailHeaderFieldInvalidCharacter, data[index]));
}
// Valid char
else
{
index--;
}
}while (index >= 0);
// We didn't find a matching '[', throw.
throw new FormatException(string.Format(SR.MailHeaderFieldInvalidCharacter,
MailBnfHelper.EndSquareBracket));
}
// Parses the local-part section of an address. The local-part may be in dot-atom format or
// quoted-string format. e.g. <user.name@domain> or <"user name"@domain>
// We do not support the obsolete formats of user."name"@domain, "user".name@domain, or "user"."name"@domain.
//
// Preconditions:
// - data[index + 1] is the '@' symbol
//
// Postconditions:
// - data[index] should refer to the '<', if any, otherwise the next non-CFWS char.
// - index == -1 if the beginning of the data string has been reached.
// - returns the parsed local-part, including any bounding quotes around quoted-strings
//
// Throws a FormatException:
// - For invalid un-escaped chars, including Unicode
// - If the final value of data[index] is not a valid character to precede the local-part
private static string ParseLocalPart(string data, ref int index, bool expectAngleBracket,
bool expectMultipleAddresses)
{
// Skip comments and whitespace
index = ReadCfwsAndThrowIfIncomplete(data, index);
// Mark the start of the local-part
int startingIndex = index;
// Is the local-part component in quoted-string format or dot-atom format?
if (data[index] == MailBnfHelper.Quote)
{
index = QuotedStringFormatReader.ReadReverseQuoted(data, index, true);
}
else
{
index = DotAtomReader.ReadReverse(data, index);
// Check that the local-part is properly separated from the next component. It may be separated by a
// comment, white space, an expected angle bracket, a quote for the display-name, or an expected comma
// before the next address.
if (index >= 0 &&
!(
MailBnfHelper.Whitespace.Contains(data[index]) || // < local@domain >
data[index] == MailBnfHelper.EndComment || // <(comment)local@domain>
(expectAngleBracket && data[index] == MailBnfHelper.StartAngleBracket) || // <local@domain>
(expectMultipleAddresses && data[index] == MailBnfHelper.Comma) // local@dom,local@dom
// Note: The following condition is more lax than the RFC. This is done so we could support
// a common invalid formats as shown below.
|| data[index] == MailBnfHelper.Quote // "display"local@domain
)
)
{
throw new FormatException(string.Format(SR.MailHeaderFieldInvalidCharacter, data[index]));
}
}
string localPart = data.Substring(index + 1, startingIndex - index);
index = WhitespaceReader.ReadCfwsReverse(data, index);
return(NormalizeOrThrow(localPart));
}
//
// This method attempts reading quoted-string formatted data when the bounding quotes were omitted.
// This is common for e-mail display-names.
//
// Precondition: The index must be within the bounds of the data string.
//
// Return value:
// - The index of the special delimiter provided.
// e.g. In ([email protected], billy box [email protected]), starting at index=19 (x) returns index=9 (,).
// - -1 if the terminating character was not found.
// e.g. In (my name username@domain), starting at index=5 (e) returns index=-1.
//
// A FormatException will be thrown if:
// - A non-escaped character is encountered that is not valid in a quoted string. This includes double quotes.
// - A Unicode character is encountered and Unicode has not been allowed.
//
internal static int ReadReverseUnQuoted(string data, int index, bool permitUnicode, bool expectCommaDelimiter)
{
Debug.Assert(0 <= index && index < data.Length, "Index out of range: " + index + ", " + data.Length);
do
{
// Check for valid whitespace
index = WhitespaceReader.ReadFwsReverse(data, index);
if (index < 0)
{
break;
}
// Check for escaped characters
int quotedCharCount = QuotedPairReader.CountQuotedChars(data, index, permitUnicode);
if (quotedCharCount > 0)
{
index = index - quotedCharCount;
}
// Check for the terminating char
else if (expectCommaDelimiter && data[index] == MailBnfHelper.Comma)
{
break;
}
// Check invalid characters
else if (!IsValidQtext(permitUnicode, data[index]))
{
throw new FormatException(string.Format(SR.MailHeaderFieldInvalidCharacter, data[index]));
}
// Valid char
else
{
index--;
}
}while (index >= 0);
return(index);
}
//
// Parse a single MailAddress, potentially from a list.
//
// Preconditions:
// - Index must be within the bounds of the data string.
// - The data string must not be null or empty
//
// Postconditions:
// - Returns a valid MailAddress object parsed from the string
// - For a single MailAddress index is set to -1
// - For a list data[index] is the comma separator or -1 if the end of the data string was reached.
//
// Throws a FormatException if any part of the MailAddress is invalid.
private static void ParseAddress(string data, bool expectMultipleAddresses, ref int index)
{
Debug.Assert(!String.IsNullOrEmpty(data));
Debug.Assert(index >= 0 && index < data.Length, "Index out of range: " + index + ", " + data.Length);
// Parsed components to be assembled as a MailAddress later
string domain = null;
string localPart = null;
string displayName = null;
// Skip comments and whitespace
index = ReadCfwsAndThrowIfIncomplete(data, index);
// Do we expect angle brackets around the address?
// e.g. ("display name" <user@domain>)
bool expectAngleBracket = false;
if (data[index] == MailBnfHelper.EndAngleBracket)
{
expectAngleBracket = true;
index--;
}
domain = ParseDomain(data, ref index);
// The next character after the domain must be the '@' symbol
if (data[index] != MailBnfHelper.At)
{
throw new FormatException(string.Format(SR.MailAddressInvalidFormat));
}
// Skip the '@' symbol
index--;
localPart = ParseLocalPart(data, ref index, expectAngleBracket, expectMultipleAddresses);
// Check for a matching angle bracket around the address
if (expectAngleBracket)
{
if (index >= 0 && data[index] == MailBnfHelper.StartAngleBracket)
{
index--; // Skip the angle bracket
// Skip white spaces, but leave comments, as they may be part of the display name.
index = WhitespaceReader.ReadFwsReverse(data, index);
}
else
{
// Mismatched angle brackets, throw
throw new FormatException(string.Format(SR.MailHeaderFieldInvalidCharacter,
(index >= 0 ? data[index] : MailBnfHelper.EndAngleBracket)));
}
}
// Is there anything left to parse?
// There could still be a display name or another address
if (index >= 0 && !(expectMultipleAddresses && data[index] == MailBnfHelper.Comma))
{
displayName = ParseDisplayName(data, ref index, expectMultipleAddresses);
}
else
{
displayName = String.Empty;
}
}