/// <summary>
/// This is the method that actually does the work.
/// </summary>
/// <param name="DA">The DA object can be used to retrieve data from input parameters and
/// to store data in output parameters.</param>
protected override void SolveInstance(IGH_DataAccess DA)
{
// First, we need to retrieve all data from the input parameters.
// When data cannot be extracted from a parameter, we should abort this method.
if (!DA.GetDataList <Rhino.Geometry.Curve>(0, rhinoCurvesInput))
{
return;
}
DA.GetData(1, ref segmentLengthInput);
if (!DA.GetData(2, ref rfemLineSupportInput))
{
rfemLineSupportInput.No = -1;
}
DA.GetData(3, ref commentsInput);
DA.GetData(4, ref run);
// The actual functionality will be in a method defined below. This is where we run it
if (run == true)
{
//clears and resets all output parameters.
// this is done to ensure that if function is repeadedly run, then parameters are re-read and redefined
RfemLines.Clear();
writeSuccess = false;
RfemLines = CreateRfemLines(rhinoCurvesInput, rfemLineSupportInput, commentsInput);
DA.SetData(1, writeSuccess);
}
else
{
// if "run" is set to false, then also the output parameter "success" is set to false
// this ensures that as soon as "run" toogle is set "false", it automatically updates output.
DA.SetData(1, false);
}
// Finally assign the processed data to the output parameter.
DA.SetDataList(0, RfemLines);
//clears and resets all input parameters.
// this is done to ensure that if function is repeadedly run, then parameters are re-read and redefined
rhinoCurvesInput.Clear();
commentsInput = "";
rfemLineSupportInput = new Dlubal.RFEM5.LineSupport();
}
private List <Dlubal.RFEM5.Line> CreateRfemLines(List <Rhino.Geometry.Curve> Rh_Crv, Dlubal.RFEM5.LineSupport rfemLineSupportMethodIn, string commentsListMethodIn)
{
//defining variables needed to store geometry and RFEM info
Rhino.Geometry.Point3d startPoint;
Rhino.Geometry.Point3d endPoint;
List <Dlubal.RFEM5.Node> RfemNodeList = new List <Dlubal.RFEM5.Node>();
List <Dlubal.RFEM5.Line> RfemLineList = new List <Dlubal.RFEM5.Line>();
string createdLinesList = "";
//---- Rhino geometry simplification and creating a list of simple straight lines ----
#region Rhino geometry processing
//start by reducing the input curves to simple lines with start/end points
List <Rhino.Geometry.Curve> RhSimpleLines = new List <Rhino.Geometry.Curve>();
foreach (Rhino.Geometry.Curve RhSingleCurve in Rh_Crv)
{
if (RhSingleCurve.IsPolyline())
{
if (RhSingleCurve.SpanCount == 1)
{
// if line is a simple straight line
RhSimpleLines.Add(RhSingleCurve);
}
else
{
foreach (Rhino.Geometry.Curve explodedLine in RhSingleCurve.DuplicateSegments())
{
// if line is polyline, then it gets exploded
RhSimpleLines.Add(explodedLine);
}
}
}
else
{
foreach (Rhino.Geometry.Curve explodedLine in RhSingleCurve.ToPolyline(0, 0, 3.14, 1, 0, 0, 0, segmentLengthInput, true).DuplicateSegments())
{
// if line is a an arc or nurbs or have any curvature, it gets simplified
RhSimpleLines.Add(explodedLine);
}
}
}
#endregion
//---- Interface with RFEM, getting available element numbers ----
#region Gets interface with RFEM and currently available element numbers
// Gets interface to running RFEM application.
IApplication app = Marshal.GetActiveObject("RFEM5.Application") as IApplication;
// Locks RFEM licence
app.LockLicense();
// Gets interface to active RFEM model.
IModel model = app.GetActiveModel();
// Gets interface to model data.
IModelData data = model.GetModelData();
// Gets Max node, line , line support numbers
int currentNewNodeNo = data.GetLastObjectNo(ModelObjectType.NodeObject) + 1;
int currentNewLineNo = data.GetLastObjectNo(ModelObjectType.LineObject) + 1;
int currentNewLineSupportNo = data.GetLastObjectNo(ModelObjectType.LineSupportObject) + 1;
#endregion
//----- cycling through all lines and creating RFEM objects ----
#region Creates RFEM node and line elements
for (int i = 0; i < RhSimpleLines.Count; i++)
{
// defining start and end nodes of the line
Dlubal.RFEM5.Node tempCurrentStartNode = new Dlubal.RFEM5.Node();
Dlubal.RFEM5.Node tempCurrentEndNode = new Dlubal.RFEM5.Node();
startPoint = RhSimpleLines[i].PointAtStart;
endPoint = RhSimpleLines[i].PointAtEnd;
tempCurrentStartNode.No = currentNewNodeNo;
tempCurrentStartNode.X = startPoint.X;
tempCurrentStartNode.Y = startPoint.Y;
tempCurrentStartNode.Z = startPoint.Z;
tempCurrentEndNode.No = currentNewNodeNo + 1;
tempCurrentEndNode.X = endPoint.X;
tempCurrentEndNode.Y = endPoint.Y;
tempCurrentEndNode.Z = endPoint.Z;
RfemNodeList.Add(tempCurrentStartNode);
RfemNodeList.Add(tempCurrentEndNode);
// defining line
Dlubal.RFEM5.Line tempCurrentLine = new Dlubal.RFEM5.Line();
tempCurrentLine.No = currentNewLineNo;
tempCurrentLine.Type = LineType.PolylineType;
tempCurrentLine.Comment = commentsListMethodIn;
tempCurrentLine.NodeList = $"{tempCurrentStartNode.No}, {tempCurrentEndNode.No}";
RfemLineList.Add(tempCurrentLine);
// adding line numbers to list with all lines
if (i == RhSimpleLines.Count)
{
createdLinesList = createdLinesList + currentNewLineNo.ToString();
}
else
{
createdLinesList = createdLinesList + currentNewLineNo.ToString() + ",";
}
// increasing counters for numbering
currentNewLineNo++;
currentNewNodeNo = currentNewNodeNo + 2;
}
#endregion
//----- Writing nodes and lines to RFEM ----
#region Write nodes, lines and supports to RFEM
try
{
// modification - set model in modification mode, new information can be written
data.PrepareModification();
//This version writes lines one-by-one because the data.SetNodes() for array appears not to be working
//data.SetNodes(RfemNodeArray);
foreach (Node currentRfemNode in RfemNodeList)
{
data.SetNode(currentRfemNode);
}
//This version writes lines one-by-one because the data.SetLines() for array appears not to be working
foreach (Dlubal.RFEM5.Line currentRfemLine in RfemLineList)
{
data.SetLine(currentRfemLine);
}
//Definition of line supports - only is there is input for support:
if (rfemLineSupportInput.No != -1)
{
rfemLineSupportMethodIn.No = currentNewLineSupportNo;
rfemLineSupportMethodIn.LineList = createdLinesList;
data.SetLineSupport(ref rfemLineSupportMethodIn);
}
// finish modification - RFEM regenerates the data
data.FinishModification();
}
catch (Exception ex)
{
MessageBox.Show(ex.Message, "Error - Line Write", MessageBoxButtons.OK, MessageBoxIcon.Error);
}
#endregion
// Releases interface to RFEM model.
#region Releases interface to RFEM
model = null;
// Unlocks licence and releases interface to RFEM application.
if (app != null)
{
app.UnlockLicense();
app = null;
}
// Cleans Garbage Collector and releases all cached COM interfaces.
System.GC.Collect();
System.GC.WaitForPendingFinalizers();
#endregion
//output 'success' as true and return the list of the lines;
writeSuccess = true;
return(RfemLineList);
}
