public fileAudioVox(String fileLoc)
{
valid = false;
binfileLoc = fileLoc;
tabfileLoc = fileLoc.Replace(".bin", ".tab");
if (!File.Exists(tabfileLoc))
{
return;
}
valid = true;
binReader = new BinaryReader(File.Open(fileLoc, FileMode.Open, FileAccess.Read, FileShare.ReadWrite));
tabReader = new BinaryReader(File.Open(tabfileLoc, FileMode.Open, FileAccess.Read, FileShare.ReadWrite));
//Read the table file and populate the address list
uint curAddress = 0;
while (tabReader.BaseStream.Position != tabReader.BaseStream.Length)
{
curAddress = Endian.SwapUInt32(tabReader.ReadUInt32());
if ((int)curAddress == 0 && addresses.Count > 0)
{
break;
}
addresses.Add(curAddress);
}
System.Console.WriteLine("Addresses found: " + addresses.Count.ToString());
tabReader.Close();
//read and store the audio clip data from the binary file
for (int i = 0; i < addresses.Count - 1; i++)
{
binReader.BaseStream.Seek(addresses[i], SeekOrigin.Begin);
if (addresses[i] == addresses.Count)
{
break;
}
uint clipLength = addresses[i + 1] - addresses[i];
byte[] tempStor = new byte[clipLength];
binReader.BaseStream.Read(tempStor, 0, (int)clipLength);
tracks.Add(tempStor);
}
System.Console.WriteLine("Finished reading");
binReader.Close();
System.Console.WriteLine("Closed Stream. " + tracks.Count + " tracks stored.");
}
public fileSoundBankDP(string fileLoc)
{
valid = false;
binfileLoc = fileLoc;
tabfileLoc = fileLoc.Replace(".bin", ".tab");
if (!File.Exists(tabfileLoc))
{
return;
}
valid = true;
binReader = new BinaryReader(File.Open(fileLoc, FileMode.Open, FileAccess.Read, FileShare.ReadWrite));
tabReader = new BinaryReader(File.Open(tabfileLoc, FileMode.Open, FileAccess.Read, FileShare.ReadWrite));
//Read the table file and populate the address list; for this specifically, the addresses should be (CTL start, tbl start, tbl end, end of tab)
uint curAddress = 0;
while (tabReader.BaseStream.Position != tabReader.BaseStream.Length)
{
curAddress = Endian.SwapUInt32(tabReader.ReadUInt32());
if ((int)curAddress == 0 && addresses.Count > 0)
{
break;
}
addresses.Add(curAddress);
}
tabReader.Close();
//start reading the data from the binary file. beginning should be the magic number, and then ctl
//all three audio sample files only have one bank, i think.
//TODO: in every seek, if flags = 0 it's an offset from the start of the TBL file?
if (Endian.SwapUInt32(binReader.ReadUInt32()) != 0x42310001)
{
return; //invalid start to the file
}
bankOffset = Endian.SwapUInt32(binReader.ReadUInt32());
binReader.BaseStream.Seek(bankOffset, SeekOrigin.Begin);
bankInstruments = Endian.SwapUInt16(binReader.ReadUInt16());
bankFlags = Endian.SwapUInt16(binReader.ReadUInt16());
bankPad = Endian.SwapUInt16(binReader.ReadUInt16());
bankSampleRate = Endian.SwapUInt16(binReader.ReadUInt16());
percussionOffset = Endian.SwapUInt32(binReader.ReadUInt32());
Console.WriteLine("Bank Offset: {0:X}", bankOffset);
Console.WriteLine("Percussion Offset: {0:X}", percussionOffset);
if (bankFlags == 0 || bankFlags == 1) //yay standard format!
{
for (int i = 0; i < bankInstruments; i++) //for each instrument in the bank, add the data to array.
{
var tempInstrument = new typeInstrument();
binReader.BaseStream.Seek(bankOffset + 0xC + (i * 4), SeekOrigin.Begin); //pull the address and store it
UInt32 instrumentAddress = Endian.SwapUInt32(binReader.ReadUInt32());
binReader.BaseStream.Seek(instrumentAddress, SeekOrigin.Begin);
//Console.WriteLine("Instrument Address: {0:X}", instrumentAddress);
tempInstrument.volume = binReader.ReadByte();
tempInstrument.pan = binReader.ReadByte();
tempInstrument.priority = binReader.ReadByte();
tempInstrument.flags = binReader.ReadByte();
tempInstrument.tremType = binReader.ReadByte();
tempInstrument.tremRate = binReader.ReadByte();
tempInstrument.tremDepth = binReader.ReadByte();
tempInstrument.tremDelay = binReader.ReadByte();
tempInstrument.vibType = binReader.ReadByte();
tempInstrument.vibRate = binReader.ReadByte();
tempInstrument.vibDepth = binReader.ReadByte();
tempInstrument.vibDelay = binReader.ReadByte();
tempInstrument.bendRange = Endian.SwapUInt16(binReader.ReadUInt16());
tempInstrument.soundCount = Endian.SwapUInt16(binReader.ReadUInt16());
for (int j = 0; j < tempInstrument.soundCount; j++)//for each sound in the instrument, add the data to the array.
{
var tempSound = new typeSound();
tempSound.wavetable.predictors = new List <ushort>();
tempSound.wavetable.state = new List <ushort>();
tempSound.wavetable.waveData = new List <byte>();
binReader.BaseStream.Seek(instrumentAddress + 0x10 + (j * 4), SeekOrigin.Begin); //goto and read sound data
UInt32 soundAddress = Endian.SwapUInt32(binReader.ReadUInt32());
//Console.WriteLine("Sound Address #" + j + ": {0:X}", soundAddress);
binReader.BaseStream.Seek(soundAddress, SeekOrigin.Begin);
tempSound.envelopeAddress = Endian.SwapUInt32(binReader.ReadUInt32());
tempSound.keymapAddress = Endian.SwapUInt32(binReader.ReadUInt32());
tempSound.wavetableAddress = Endian.SwapUInt32(binReader.ReadUInt32());
tempSound.pan = binReader.ReadByte();
tempSound.volume = binReader.ReadByte();
tempSound.flags = binReader.ReadByte();
binReader.BaseStream.Seek(tempSound.envelopeAddress, SeekOrigin.Begin); //goto and read envelope data
tempSound.envelope.attackTime = Endian.SwapUInt32(binReader.ReadUInt32());
tempSound.envelope.decayTime = Endian.SwapUInt32(binReader.ReadUInt32());
tempSound.envelope.releaseTime = Endian.SwapUInt32(binReader.ReadUInt32());
tempSound.envelope.attackVolume = Endian.SwapUInt16(binReader.ReadUInt16());
tempSound.envelope.decayVolume = Endian.SwapUInt16(binReader.ReadUInt16());
binReader.BaseStream.Seek(tempSound.keymapAddress, SeekOrigin.Begin); //goto and read keymap data
tempSound.keymap.velocityMin = binReader.ReadByte();
tempSound.keymap.velocityMax = binReader.ReadByte();
tempSound.keymap.keyMin = binReader.ReadByte();
tempSound.keymap.keyMax = binReader.ReadByte();
tempSound.keymap.keyBase = binReader.ReadByte();
tempSound.keymap.detune = binReader.ReadByte();
binReader.BaseStream.Seek(tempSound.wavetableAddress, SeekOrigin.Begin);//goto and read wavetable data
tempSound.wavetable.waveBase = Endian.SwapUInt32(binReader.ReadUInt32());
tempSound.wavetable.waveLength = Endian.SwapUInt32(binReader.ReadUInt32());
tempSound.wavetable.type = binReader.ReadByte();
tempSound.wavetable.flags = binReader.ReadByte();
binReader.ReadUInt16(); //padding to end of 32-bit chunk
tempSound.wavetable.loopAddress = Endian.SwapUInt32(binReader.ReadUInt32());
if (tempSound.wavetable.type == 0)
{
tempSound.wavetable.predictorAddress = Endian.SwapUInt32(binReader.ReadUInt32());
if (tempSound.wavetable.loopAddress != 0)
{
binReader.BaseStream.Seek(tempSound.wavetable.loopAddress + (bankOffset * tempSound.wavetable.flags), SeekOrigin.Begin); //goto and read loop data
tempSound.wavetable.start = Endian.SwapUInt32(binReader.ReadUInt32());
tempSound.wavetable.end = Endian.SwapUInt32(binReader.ReadUInt32());
tempSound.wavetable.count = Endian.SwapUInt32(binReader.ReadUInt32());
for (int k = 0; k < 16; k++) //fill the state array
{
tempSound.wavetable.state.Add(Endian.SwapUInt16(binReader.ReadUInt16()));
}
}
if (tempSound.wavetable.predictorAddress != 0)
{
binReader.BaseStream.Seek(tempSound.wavetable.predictorAddress + (bankOffset * tempSound.wavetable.flags), SeekOrigin.Begin); //goto and read predictor data
tempSound.wavetable.order = Endian.SwapUInt32(binReader.ReadUInt32());
tempSound.wavetable.numPredictors = Endian.SwapUInt32(binReader.ReadUInt32());
//tempSound.wavetable.predictors.Add((ushort)(0x00000002)); //THESE ARE HERE CUZ IDK
//tempSound.wavetable.predictors.Add((ushort)(0x00000004));
for (int k = 0; k < tempSound.wavetable.order * tempSound.wavetable.numPredictors * 8; k++)
{
tempSound.wavetable.predictors.Add(Endian.SwapUInt16(binReader.ReadUInt16()));
}
}
}
else
{
if (tempSound.wavetable.loopAddress != 0)
{
binReader.BaseStream.Seek(tempSound.wavetable.loopAddress + (bankOffset * tempSound.wavetable.flags), SeekOrigin.Begin); //goto and read loop data
tempSound.wavetable.start = Endian.SwapUInt32(binReader.ReadUInt32());
tempSound.wavetable.end = Endian.SwapUInt32(binReader.ReadUInt32());
tempSound.wavetable.count = Endian.SwapUInt32(binReader.ReadUInt32());
}
}
if (i == 52 && j == 0)
{
Console.WriteLine("WaveData Address: {0:X}", tempSound.wavetable.waveBase + (bankOffset * tempSound.wavetable.flags));
Console.WriteLine("Key Max: {0:X}", tempSound.keymap.keyMax);
Console.WriteLine("Order:( should be 2) {0:X}", tempSound.wavetable.order);
Console.WriteLine("predictors: (should be 4) {0:X}", tempSound.wavetable.numPredictors);
//throw new Exception("time to overview"); //for debugging.
}
binReader.BaseStream.Seek(tempSound.wavetable.waveBase + (bankOffset /* * tempSound.wavetable.flags*/) + 0x210, SeekOrigin.Begin);//goto and read wave data
for (int k = 0; k < tempSound.wavetable.waveLength; k++)
{
tempSound.wavetable.waveData.Add(binReader.ReadByte());
}
tempInstrument.sounds.Add(tempSound);
}
instruments.Add(tempInstrument);
}
//Console.WriteLine("Instruments added: " + instruments.Count);
}
binReader.Close();
}
public fileTextureDB(string fileLoc)
{
valid = false;
binfileLoc = fileLoc;
//tabfileLoc = fileLoc.Replace(".bin",".tab");
//if(!File.Exists(tabfileLoc))
//{
// return;
//}
valid = true;
binReader = new BinaryReader(File.Open(fileLoc, FileMode.Open, FileAccess.Read, FileShare.ReadWrite));
//tabReader = new BinaryReader(File.Open(tabfileLoc, FileMode.Open, FileAccess.Read, FileShare.ReadWrite));
//Read the table file and populate the address list
uint curAddress = 0;
uint size = Endian.SwapUInt32(binReader.ReadUInt32());
for (int i = 0; i < size; i++)
{
curAddress = Endian.SwapUInt32(binReader.ReadUInt32());
addresses.Add(curAddress);
}
System.Console.WriteLine("Addresses found: " + addresses.Count.ToString());
//tabReader.Close();
//read and store images from binary file
for (int i = 0; i < addresses.Count; i++)
{
if (addresses[addresses.Count - 1] == binReader.BaseStream.Position)
{
return; //trusting the format to save us here
}
if (addresses[i] == binReader.BaseStream.Length)
{
return; //just in case our trust is broken
}
//prepare file reader
binReader.BaseStream.Seek(addresses[i], SeekOrigin.Begin);
byte width = binReader.ReadByte();
byte height = binReader.ReadByte();
byte format = binReader.ReadByte();
byte unk1 = binReader.ReadByte();
//byte flip = binReader.ReadByte();//unused?
binReader.BaseStream.Seek(addresses[i] + 8, SeekOrigin.Begin);
Bitmap tempImg = new Bitmap(width, height);
//begin comparisons!
if (format == 0)
{
if (unk1 == 0x0) //normal read. RGBA, byte each
{
for (int y = tempImg.Height - 1; y >= 0; --y)
{
for (int x = 0; x < tempImg.Width; x++)
{
uint argb = binReader.ReadUInt32();
Color col = Color.FromArgb((byte)(argb >> 24), (byte)argb, (byte)(argb >> 8), (byte)(argb >> 16));
tempImg.SetPixel(x, y, col);
}
}
}
else //every other row is pair-swapped (2,3,0,1 6,7,4,5 etc)
{
for (int y = 0; y < tempImg.Height; y++)
{
if ((y % 2) == 0)
{
for (int x = 0; x < tempImg.Width; x++)
{
uint argb = binReader.ReadUInt32();
Color col = Color.FromArgb((byte)(argb >> 24), (byte)argb, (byte)(argb >> 8), (byte)(argb >> 16));
tempImg.SetPixel(x, y, col);
}
}
else
{
for (int x = 0; x < tempImg.Width; x += 4)
{
for (int xx = 0; xx < 4; xx++)
{
uint argb = binReader.ReadUInt32();
Color col = Color.FromArgb((byte)(argb >> 24), (byte)argb, (byte)(argb >> 8), (byte)(argb >> 16));
tempImg.SetPixel(x + ((xx + 2) % 4), y, col);
}
}
}
}
}
}
else if (format == 0x5 || format == 0x25)
{
if (unk1 == 0x0) //greyscale image, byte is the brightness, vertically flipped
{
for (int y = tempImg.Height - 1; y >= 0; --y)
{
for (int x = 0; x < tempImg.Width; x++)
{
byte val = binReader.ReadByte();
tempImg.SetPixel(x, y, Color.FromArgb(val, val, val));
}
}
}
else
{
for (int y = tempImg.Height - 1; y >= 0; --y)
{
if ((height % 2) != (y % 2)) //if (height is even and row is odd) or vice-versa
{
for (int x = 0; x < tempImg.Width; x++)
{
byte val = binReader.ReadByte();
tempImg.SetPixel(x, y, Color.FromArgb(val, val, val));
}
}
else //each chunk of 8 pixels are reversed in this row
{
for (int x = 0; x < tempImg.Width; x++)
{
byte val = binReader.ReadByte();
tempImg.SetPixel(x + 4 - ((((int)x / 4) % 2) * 8), y, Color.FromArgb(val, val, val));
}
}
}
}
}
else if (format == 0x15) //greyscale image, byte per pixel
{
for (int y = 0; y < tempImg.Height; y++)
{
for (int x = 0; x < tempImg.Width; x++)
{
byte val = binReader.ReadByte();
tempImg.SetPixel(x, y, Color.FromArgb(val, val, val));
}
}
}
else if (format == 0x26) //greyscale image, byte per two pixels
{
for (int y = 0; y < tempImg.Height; y++)
{
for (int x = 0; x < tempImg.Width; x += 2)
{
byte val = binReader.ReadByte();
byte in1 = (byte)(val & 0xf0);
byte in2 = (byte)(val << 4);
tempImg.SetPixel(x, y, Color.FromArgb(in1, in1, in1));
tempImg.SetPixel(x + 1, y, Color.FromArgb(in2, in2, in2));
}
}
} //UNSURE FROM HERE ON
else if (format == 0x1)
{
if (unk1 != 0) //5-bit R G B, 1-bit a, every other row gets pair-swapped
{
for (int y = 0; y < tempImg.Height; y++)
{
if ((y % 2) == 0)
{
for (int x = 0; x < tempImg.Width; x++)
{
ushort val = Endian.SwapUInt16(binReader.ReadUInt16());
byte r = (byte)((val & 0xF800) >> 8);
byte g = (byte)((val & 0x07C0) >> 3);
byte b = (byte)((val & 0x003E) << 2);
byte a = (byte)((val & 0x0001) * 0xFF);
tempImg.SetPixel(x, y, Color.FromArgb(a, r, g, b));
}
}
else
{
for (int x = 0; x < tempImg.Width; x += 4)
{
for (int xx = 0; xx < 4; xx++)
{
if (x + (xx + 2) % 4 >= width)
{
return;
}
ushort val = Endian.SwapUInt16(binReader.ReadUInt16());
byte r = (byte)((val & 0xF800) >> 8);
byte g = (byte)((val & 0x07C0) >> 3);
byte b = (byte)((val & 0x003E) << 2);
byte a = (byte)((val & 0x0001) * 0xFF);
tempImg.SetPixel(x + ((xx + 2) % 4), y, Color.FromArgb(a, r, g, b));
}
}
}
}
}
else //5-bit R G B, 1-bit a, vertical flip
{
for (int y = tempImg.Height - 1; y >= 0; --y)
{
for (int x = 0; x < tempImg.Width; x++)
{
ushort val = Endian.SwapUInt16(binReader.ReadUInt16());
byte r = (byte)((val & 0xF800) >> 8);
byte g = (byte)((val & 0x07C0) >> 3);
byte b = (byte)((val & 0x003E) << 2);
byte a = (byte)((val & 0x0001) * 0xFF);
tempImg.SetPixel(x, y, Color.FromArgb(a, r, g, b));
}
}
}
}
else if (format == 0x4) //4-bit, 2 bytes per pixel
{
for (int y = 0; y < tempImg.Height; y++)
{
for (int x = 0; x < tempImg.Width; x++)
{
ushort val = binReader.ReadUInt16();
byte r = (byte)((val & 0xF) * 0x11);
byte g = (byte)(((val >> 4) & 0xF) * 0x11);
byte b = (byte)(((val >> 8) & 0xF) * 0x11);
byte a = (byte)(((val >> 12) & 0xF) * 0x11);
Color col = Color.FromArgb(a, r, g, b);
tempImg.SetPixel(x, y, col);
}
}
}
else if (format == 0x11) //5-bit R G B, 1-bit a, vertical flip
{
for (int y = tempImg.Height - 1; y >= 0; --y)
{
for (int x = 0; x < tempImg.Width; x++)
{
ushort val = Endian.SwapUInt16(binReader.ReadUInt16());
byte r = (byte)((val & 0xF800) >> 8);
byte g = (byte)((val & 0x07C0) >> 3);
byte b = (byte)((val & 0x003E) << 2);
byte a = (byte)((val & 0x0001) * 0xFF);
tempImg.SetPixel(x, y, Color.FromArgb(a, r, g, b));
}
}
}
else
{
System.Console.WriteLine("Whoops, new format: " + format);
continue;
}
images.Add(tempImg);
}
System.Console.WriteLine("Finished reading");
binReader.Close();
System.Console.WriteLine("Closed reader");
}