private Mapping CreatePortMap(Mapping mapping, bool create)
{
List <byte> package = new List <byte> ();
package.Add(PmpConstants.Version);
package.Add(mapping.Protocol == Protocol.Tcp ? PmpConstants.OperationCodeTcp : PmpConstants.OperationCodeUdp);
package.Add((byte)0); //reserved
package.Add((byte)0); //reserved
package.AddRange(BitConverter.GetBytes(IPAddress.HostToNetworkOrder((short)mapping.PrivatePort)));
package.AddRange(BitConverter.GetBytes(create ? IPAddress.HostToNetworkOrder((short)mapping.PublicPort) : (short)0));
package.AddRange(BitConverter.GetBytes(IPAddress.HostToNetworkOrder(mapping.Lifetime)));
CreatePortMapAsyncState state = new CreatePortMapAsyncState();
state.Buffer = package.ToArray();
state.Mapping = mapping;
ThreadPool.QueueUserWorkItem(new WaitCallback(CreatePortMapAsync), state);
#if SSHARP
state.ResetEvent.Wait();
#else
WaitHandle.WaitAll(new WaitHandle[] { state.ResetEvent });
#endif
if (!state.Success)
{
string type = create ? "create" : "delete";
throw new MappingException(String.Format("Failed to {0} portmap (protocol={1}, private port={2}", type, mapping.Protocol, mapping.PrivatePort));
}
return(state.Mapping);
}
internal UpnpNatDevice(IPAddress localAddress, string deviceDetails, string serviceType)
{
this.LastSeen = DateTime.Now;
this.localAddress = localAddress;
// Split the string at the "location" section so i can extract the ipaddress and service description url
string locationDetails = deviceDetails.Substring(deviceDetails.IndexOf("Location", StringComparison.InvariantCultureIgnoreCase) + 9).Split('\r')[0];
this.serviceType = serviceType;
// Make sure we have no excess whitespace
locationDetails = locationDetails.Trim();
// FIXME: Is this reliable enough. What if we get a hostname as opposed to a proper http address
// Are we going to get addresses with the "http://" attached?
if (locationDetails.StartsWith("http://", StringComparison.InvariantCultureIgnoreCase))
{
NatUtility.Log("Found device at: {0}", locationDetails);
// This bit strings out the "http://" from the string
locationDetails = locationDetails.Substring(7);
// We then split off the end of the string to get something like: 192.168.0.3:241 in our string
string hostAddressAndPort = locationDetails.Remove(locationDetails.IndexOf('/'));
// From this we parse out the IP address and Port
if (hostAddressAndPort.IndexOf(':') > 0)
{
this.hostEndPoint = new IPEndPoint(IPAddress.Parse(hostAddressAndPort.Remove(hostAddressAndPort.IndexOf(':'))),
Convert.ToUInt16(hostAddressAndPort.Substring(hostAddressAndPort.IndexOf(':') + 1), System.Globalization.CultureInfo.InvariantCulture));
}
else
{
// there is no port specified, use default port (80)
this.hostEndPoint = new IPEndPoint(IPAddress.Parse(hostAddressAndPort), 80);
}
NatUtility.Log("Parsed device as: {0}", this.hostEndPoint.ToString());
// The service description URL is the remainder of the "locationDetails" string. The bit that was originally after the ip
// and port information
this.serviceDescriptionUrl = locationDetails.Substring(locationDetails.IndexOf('/'));
}
else
{
Trace.WriteLine("Couldn't decode address. Please send following string to the developer: ");
Trace.WriteLine(deviceDetails);
}
}
internal PmpNatDevice(IPAddress localAddress, IPAddress publicAddress)
{
this.localAddress = localAddress;
this.publicAddress = publicAddress;
}
private void CreatePortMapListen(object obj)
{
CreatePortMapListenState state = obj as CreatePortMapListenState;
UdpClient udpClient = state.UdpClient;
state.UdpClientReady.WaitOne(); // Evidently UdpClient has some lazy-init Send/Receive race?
IPEndPoint endPoint = new IPEndPoint(localAddress, PmpConstants.ServerPort);
while (!state.Success)
{
byte[] data;
try
{
data = udpClient.Receive(ref endPoint);
}
catch (SocketException)
{
state.Success = false;
return;
}
if (data.Length < 16)
{
continue;
}
if (data[0] != PmpConstants.Version)
{
continue;
}
byte opCode = (byte)(data[1] & (byte)127);
Protocol protocol = Protocol.Tcp;
if (opCode == PmpConstants.OperationCodeUdp)
{
protocol = Protocol.Udp;
}
short resultCode = IPAddress.NetworkToHostOrder(BitConverter.ToInt16(data, 2));
uint epoch = (uint)IPAddress.NetworkToHostOrder(BitConverter.ToInt32(data, 4));
int privatePort = (ushort)IPAddress.NetworkToHostOrder(BitConverter.ToInt16(data, 8));
int publicPort = (ushort)IPAddress.NetworkToHostOrder(BitConverter.ToInt16(data, 10));
uint lifetime = (uint)IPAddress.NetworkToHostOrder(BitConverter.ToInt32(data, 12));
if (resultCode != PmpConstants.ResultCodeSuccess)
{
state.Success = false;
return;
}
if (lifetime == 0)
{
//mapping was deleted
state.Success = true;
state.Mapping = null;
return;
}
else
{
//mapping was created
//TODO: verify that the private port+protocol are a match
Mapping mapping = state.Mapping;
mapping.PublicPort = publicPort;
mapping.Protocol = protocol;
mapping.Expiration = DateTime.Now.AddSeconds(lifetime);
state.Success = true;
}
}
}
public GetExternalIPAddressResponseMessage(string ip)
: base(null)
{
this.externalIPAddress = IPAddress.Parse(ip);
}
private void ServicesReceived(IAsyncResult result)
{
HttpWebResponse response = null;
try
{
int abortCount = 0;
int bytesRead = 0;
byte[] buffer = new byte[10240];
StringBuilder servicesXml = new StringBuilder();
XmlDocument xmldoc = new XmlDocument();
HttpWebRequest request = result.AsyncState as HttpWebRequest;
response = request.EndGetResponse(result) as HttpWebResponse;
Stream s = response.GetResponseStream();
if (response.StatusCode != HttpStatusCode.OK)
{
NatUtility.Log("{0}: Couldn't get services list: {1}", HostEndPoint, response.StatusCode);
return; // FIXME: This the best thing to do??
}
while (true)
{
bytesRead = s.Read(buffer, 0, buffer.Length);
servicesXml.Append(Encoding.UTF8.GetString(buffer, 0, bytesRead));
try
{
xmldoc.LoadXml(servicesXml.ToString());
response.Close();
break;
}
catch (XmlException)
{
// If we can't receive the entire XML within 500ms, then drop the connection
// Unfortunately not all routers supply a valid ContentLength (mine doesn't)
// so this hack is needed to keep testing our recieved data until it gets successfully
// parsed by the xmldoc. Without this, the code will never pick up my router.
if (abortCount++ > 50)
{
response.Close();
return;
}
NatUtility.Log("{0}: Couldn't parse services list", HostEndPoint);
#if SSHARP
CrestronEnvironment.Sleep(10);
#else
System.Threading.Thread.Sleep(10);
#endif
}
}
NatUtility.Log("{0}: Parsed services list", HostEndPoint);
XmlNamespaceManager ns = new XmlNamespaceManager(xmldoc.NameTable);
ns.AddNamespace("ns", "urn:schemas-upnp-org:device-1-0");
XmlNodeList nodes = xmldoc.SelectNodes("//*/ns:serviceList", ns);
foreach (XmlNode node in nodes)
{
//Go through each service there
foreach (XmlNode service in node.ChildNodes)
{
//If the service is a WANIPConnection, then we have what we want
string type = service["serviceType"].InnerText;
NatUtility.Log("{0}: Found service: {1}", HostEndPoint, type);
StringComparison c = StringComparison.OrdinalIgnoreCase;
if (type.Equals(this.serviceType, c))
{
this.controlUrl = service["controlURL"].InnerText;
NatUtility.Log("{0}: Found upnp service at: {1}", HostEndPoint, controlUrl);
try
{
Uri u = new Uri(controlUrl);
if (u.IsAbsoluteUri)
{
IPEndPoint old = hostEndPoint;
this.hostEndPoint = new IPEndPoint(IPAddress.Parse(u.Host), u.Port);
NatUtility.Log("{0}: Absolute URI detected. Host address is now: {1}", old, HostEndPoint);
this.controlUrl = controlUrl.Substring(u.GetLeftPart(UriPartial.Authority).Length);
NatUtility.Log("{0}: New control url: {1}", HostEndPoint, controlUrl);
}
}
catch
{
NatUtility.Log("{0}: Assuming control Uri is relative: {1}", HostEndPoint, controlUrl);
}
NatUtility.Log("{0}: Handshake Complete", HostEndPoint);
this.callback(this);
return;
}
}
}
//If we get here, it means that we didn't get WANIPConnection service, which means no uPnP forwarding
//So we don't invoke the callback, so this device is never added to our lists
}
catch (WebException ex)
{
// Just drop the connection, FIXME: Should i retry?
NatUtility.Log("{0}: Device denied the connection attempt: {1}", HostEndPoint, ex);
}
finally
{
if (response != null)
{
response.Close();
}
}
}
