//The actual polygon test for the given properties and generation container using the indicated polygon test mode "pt"
static bool MeshPolyTest(GeneratorInstance gi, GeneratorProps gp, PolygonTest pt)
{
if (gi.tris.Count >= 3 && gi.finalVerts.Length >= 3)
{
switch (pt)
{
case PolygonTest.TotalTriangles:
return(gi.tris.Count / 3 <= 255);
case PolygonTest.TotalQuads:
return(gi.tris.Count / 6 <= 255);
case PolygonTest.EdgeQuads:
return(((gp.topSegments + gp.bottomSegments) * (gp.cornerDetails[0] + gp.cornerDetails[1] + gp.cornerDetails[2] + gp.cornerDetails[3] + 6)) <= 255);
case PolygonTest.FaceEdgeQuads:
return(((gp.topSegments + gp.bottomSegments) * ((gp.cornerDetails[0] + gp.cornerDetails[1] + gp.cornerDetails[2] + gp.cornerDetails[3]) * (gp.XZDetail + 1) + gp.XYDetail + gp.YZDetail + 2)) <= 255);
}
}
return(false);
}
//Mesh generation function wrapped by other methods; do not call this one directly
static Mesh GenerationOperation(ref GeneratorProps genProps, out ColliderFinishStatus cFin, bool preview)
{
genProps.VerifyProperties(); //Make sure properties are valid
cFin = ColliderFinishStatus.Fail; //Default status
PolygonTest polyTest = PolygonTest.TotalTriangles; //Default polygon test
//Choose proper polygon test mode
if (genProps.polyTestMode == PolygonTestMode.BestGuess)
{
polyTest = genProps.boxedCorners ? PolygonTest.EdgeQuads : PolygonTest.FaceEdgeQuads;
}
else if (genProps.polyTestMode == PolygonTestMode.SafeGuess)
{
polyTest = genProps.boxedCorners ? PolygonTest.TotalQuads : PolygonTest.TotalTriangles;
}
else
{
polyTest = (PolygonTest)(genProps.polyTestMode - 2);
}
GeneratorInstance gi = new GeneratorInstance();//Temporary container for generation data in the static method
bool passedPolyTest = false;
bool generating = true;
int genAttempts = 0; //Generation attempts
int reductionType = 0; //0 = plane strips, 1 = top/bottom segments, 2 = corners
//Loop is for repeat detail reduction attempts
while (generating)
{
if (gi != null)
{
gi.ClearData(); //Clear generation data before next attempt
}
GenerateMesh(ref gi, genProps); //The true mesh generation function
if (genProps.bypassPolyTest || preview)
{
//Skipping polygon testing
passedPolyTest = true;
generating = false;
}
else if (genProps.detailReduction == GeneratorProps.DetailReductionMode.None)
{
//Skipping detail reduction and checking if polygon test was passed
passedPolyTest = MeshPolyTest(gi, genProps, polyTest);
generating = false;
}
else if (genProps.detailReductionAttempts > 0)
{
//Detail reduction process
passedPolyTest = MeshPolyTest(gi, genProps, polyTest);//Polygon testing
if (genProps.detailReduction == GeneratorProps.DetailReductionMode.All)
{
//Reduce all detail properties together, one at a time
if (genAttempts < genProps.detailReductionAttempts && !passedPolyTest)
{
switch (reductionType)
{
case 0: //Place strip reduction
genProps.XYDetail = Mathf.Max(0, genProps.XYDetail - 1);
genProps.YZDetail = Mathf.Max(0, genProps.YZDetail - 1);
genProps.XZDetail = Mathf.Max(0, genProps.XZDetail - 1);
break;
case 1: //Top and bottom segment reduction
genProps.topSegments = Mathf.Max(0, genProps.topSegments - 1);
genProps.bottomSegments = Mathf.Max(0, genProps.bottomSegments - 1);
break;
case 2: //Corner detail reduction
genProps.cornerDetails[0] = Mathf.Max(0, genProps.cornerDetails[0] - 1);
genProps.cornerDetails[1] = Mathf.Max(0, genProps.cornerDetails[1] - 1);
genProps.cornerDetails[2] = Mathf.Max(0, genProps.cornerDetails[2] - 1);
genProps.cornerDetails[3] = Mathf.Max(0, genProps.cornerDetails[3] - 1);
break;
}
reductionType = (reductionType + 1) % 3;//Increment to next reduction type for subsequent attempt
}
else
{
generating = false;
}
}
else if (genProps.detailReduction == GeneratorProps.DetailReductionMode.LargestFirst)
{
//Reduce greatest detail property values first
if (genAttempts < genProps.detailReductionAttempts && !passedPolyTest)
{
//Get maximum detail value
int maxDetail = Mathf.Max(
genProps.XYDetail,
genProps.YZDetail,
genProps.XZDetail,
genProps.topSegments,
genProps.bottomSegments,
genProps.cornerDetails[0],
genProps.cornerDetails[1],
genProps.cornerDetails[2],
genProps.cornerDetails[3]);
//Reduce all detail properties that match the maximum value
if (maxDetail == genProps.XYDetail)
{
genProps.XYDetail = Mathf.Max(0, genProps.XYDetail - 1);
}
if (maxDetail == genProps.YZDetail)
{
genProps.YZDetail = Mathf.Max(0, genProps.YZDetail - 1);
}
if (maxDetail == genProps.XZDetail)
{
genProps.XZDetail = Mathf.Max(0, genProps.XZDetail - 1);
}
if (maxDetail == genProps.topSegments)
{
genProps.topSegments = Mathf.Max(0, genProps.topSegments - 1);
}
if (maxDetail == genProps.bottomSegments)
{
genProps.bottomSegments = Mathf.Max(0, genProps.bottomSegments - 1);
}
if (maxDetail == genProps.cornerDetails[0])
{
genProps.cornerDetails[0] = Mathf.Max(0, genProps.cornerDetails[0] - 1);
}
if (maxDetail == genProps.cornerDetails[1])
{
genProps.cornerDetails[1] = Mathf.Max(0, genProps.cornerDetails[1] - 1);
}
if (maxDetail == genProps.cornerDetails[2])
{
genProps.cornerDetails[2] = Mathf.Max(0, genProps.cornerDetails[2] - 1);
}
if (maxDetail == genProps.cornerDetails[3])
{
genProps.cornerDetails[3] = Mathf.Max(0, genProps.cornerDetails[3] - 1);
}
}
else
{
generating = false;
}
}
else
{
generating = false;
}
}
else
{
generating = false;
}
genAttempts++;
if (genAttempts > genProps.detailReductionAttempts)
{
//Quit detail reduction upon reaching maximum attempts and throw exception
generating = false;
if (!passedPolyTest)
{
cFin = ColliderFinishStatus.DetailTimeout;
}
}
}
if (passedPolyTest)
{
cFin = ColliderFinishStatus.Success;//Successful generation after passing polygon test
}
else if (cFin != ColliderFinishStatus.DetailTimeout)
{
cFin = ColliderFinishStatus.FailTriCount;//Failed generation due to having to many polygons
}
return(gi.colMesh);
}
//Actual mesh generation with the indicated properties and generation container; do not call this directly
static void GenerateMesh(ref GeneratorInstance gi, GeneratorProps genProps)
{
//Important vertex strips at ends of sections
VertexStrip firstBottomStrip = new VertexStrip();
VertexStrip lastBottomStrip = new VertexStrip();
VertexStrip firstTopStrip = new VertexStrip();
VertexStrip lastTopStrip = new VertexStrip();
int bottomSegments = Mathf.Max(1, genProps.bottomSegments);
int topSegments = Mathf.Max(1, genProps.topSegments);
//Bottom section verts
for (int i = 0; i < bottomSegments + 1; i++)
{
float stripProgress = (i * 1.0f) / (bottomSegments * 1.0f);
//Properties for current vertex strip
VertexStripProps stripProps = new VertexStripProps
{
isTop = false,
flat = genProps.bottomSegments == 0,
cornerDetails = genProps.cornerDetails,
XYDetail = genProps.XYDetail,
YZDetail = genProps.YZDetail,
cornerProgress = Mathf.Pow(1.0f - Mathf.Pow(stripProgress, genProps.stripDistribution1), genProps.stripDistribution2),
corners = genProps.corners,
detailSmoothness = genProps.detailSmoothness
};
lastBottomStrip = new VertexStrip(stripProps);
gi.strips.Add(lastBottomStrip);
if (i == 0)
{
firstBottomStrip = new VertexStrip(stripProps);
}
}
//Top section verts
for (int i = 0; i < topSegments + 1; i++)
{
float stripProgress = 1.0f - (i * 1.0f) / (topSegments * 1.0f);
//Properties for current vertex strip
VertexStripProps stripProps = new VertexStripProps
{
isTop = true,
flat = genProps.topSegments == 0,
cornerDetails = genProps.cornerDetails,
XYDetail = genProps.XYDetail,
YZDetail = genProps.YZDetail,
cornerProgress = Mathf.Pow(1.0f - Mathf.Pow(stripProgress, genProps.stripDistribution1), genProps.stripDistribution2),
corners = genProps.corners,
detailSmoothness = genProps.detailSmoothness
};
firstTopStrip = new VertexStrip(stripProps);
//Add lateral strips between top and bottom sections
if (genProps.XZDetail > 0 && i == 0)
{
int curStrip = 1;
while (curStrip < genProps.XZDetail + 1)
{
gi.strips.Add(new VertexStrip(lastBottomStrip, firstTopStrip, ((curStrip * 1.0f) / ((genProps.XZDetail + 1) * 1.0f)), genProps.detailSmoothness));
curStrip++;
}
}
else if (i == topSegments)
{
lastTopStrip = new VertexStrip(stripProps);
}
gi.strips.Add(firstTopStrip);
}
//Top cap
lastTopStrip.ArrangeSides();
lastTopStrip.GenerateCap();
//Bottom cap
firstBottomStrip.ArrangeSides();
firstBottomStrip.GenerateCap();
//Final vert array concatenation
List <Vector3> tempVerts = new List <Vector3>();
for (int i = 0; i < gi.strips.Count; i++)
{
tempVerts.AddRange(gi.strips[i].verts);
}
//Adding vertices of the caps
int capStartIndex = tempVerts.Count;
tempVerts.AddRange(lastTopStrip.capVerts);
tempVerts.AddRange(firstBottomStrip.capVerts);
gi.finalVerts = tempVerts.ToArray();
//Triangle assignment
int stripLength = gi.strips[0].verts.Count;
int baseVert = 0;
int stripLoop = 0;
while (stripLoop < gi.strips.Count - 1)
{
for (int i = 0; i < stripLength - 1; i++)
{
gi.tris.Add(baseVert + i);
gi.tris.Add(baseVert + stripLength + 1 + i);
gi.tris.Add(baseVert + i + 1);
gi.tris.Add(baseVert + stripLength + i);
gi.tris.Add(baseVert + stripLength + 1 + i);
gi.tris.Add(baseVert + i);
}
baseVert += stripLength;
stripLoop++;
}
//Top cap triangles
stripLength = lastTopStrip.side1.Count;
for (int i = 0; i < lastTopStrip.capVerts.Count - stripLength - 1; i++)
{
if ((i + 1) % stripLength != 0)
{
gi.tris.Add(capStartIndex + i);
gi.tris.Add(capStartIndex + i + 1);
gi.tris.Add(capStartIndex + stripLength + i);
gi.tris.Add(capStartIndex + stripLength + i);
gi.tris.Add(capStartIndex + i + 1);
gi.tris.Add(capStartIndex + stripLength + 1 + i);
}
}
//Bottom cap triangles
capStartIndex += lastTopStrip.capVerts.Count;
stripLength = firstBottomStrip.side1.Count;
for (int i = 0; i < firstBottomStrip.capVerts.Count - stripLength - 1; i++)
{
if ((i + 1) % stripLength != 0)
{
gi.tris.Add(capStartIndex + i + 1);
gi.tris.Add(capStartIndex + i);
gi.tris.Add(capStartIndex + stripLength + i);
gi.tris.Add(capStartIndex + i + 1);
gi.tris.Add(capStartIndex + stripLength + i);
gi.tris.Add(capStartIndex + stripLength + 1 + i);
}
}
//Hook Deformation
if (genProps.hooks.Length > 0)
{
for (int i = 0; i < genProps.hooks.Length; i++)
{
DeformHook curHook = genProps.hooks[i];
if (curHook.enabled)
{
for (int j = 0; j < gi.finalVerts.Length; j++)
{
Vector3 curVert = gi.finalVerts[j];
float deformAmount = Mathf.Pow(Mathf.Max(0.0f, curHook.radius - Vector3.Distance(curVert, curHook.localPos)), curHook.falloff);
switch (curHook.hookType)
{
case DeformHook.HookType.Pull:
gi.finalVerts[j] += curHook.localRot * Vector3.forward * deformAmount * curHook.strength;
break;
case DeformHook.HookType.Twist:
Vector3 newVert = curHook.localPos + curHook.localRot * (curVert - curHook.localPos);
gi.finalVerts[j] += (newVert - curVert) * deformAmount * curHook.strength;
break;
case DeformHook.HookType.Expand:
gi.finalVerts[j] += curHook.localPos + (curVert - curHook.localPos) * (1.0f + (curHook.strength - 1.0f) * deformAmount) - curVert;
break;
}
}
}
}
}
//Set final mesh data
gi.colMesh = new Mesh();
gi.colMesh.vertices = gi.finalVerts;
gi.colMesh.triangles = gi.tris.ToArray();
}
