public void Run()
{
int inBufferCount;
try
{
serialPort = Comm2IP.GetSerialPort(socket, comPort, baudRate);
while (true)
{
inBufferCount = socket.Receive(inBuffer);
if (inBufferCount == 0)
{
break;
}
serialPort.Send(inBuffer, inBufferCount);
}
}
catch (Exception e)
{
log.Error(e);
}
finally
{
log.Info("Lost connection from: " + socket.RemoteEndPoint + " for: " + comPort + "@" + baudRate);
Comm2IP.CloseSerialPort(serialPort);
try { socket.Close(); }
catch { }
}
}
public InboundMessage[] DoIt()
{
// Create new Service object - the parent of all and the main interface to you.
Service srv;
srv = Service.getInstance();
InboundMessage[] list = new InboundMessage[100];
// Modem Settings
String comPort = "com6";
String modemName = "huwawei";
int port = 12000;
String manufacturer = "huwawei";
int portSpeed = 9600;
// *** The tricky part ***
// *** Comm2IP Driver ***
// Create (and start!) as many Comm2IP threads as the modems you are using.
// Be careful about the mappings - use the same mapping in the Gateway definition.
Comm2IP.Comm2IP com1 = new Comm2IP.Comm2IP(new byte[] { 127, 0, 0, 1 }, port, comPort, portSpeed);
try
{
Console.WriteLine("Example: Read messages from a serial gsm modem.");
Console.WriteLine(Library.getLibraryDescription());
Console.WriteLine("Version: " + Library.getLibraryVersion() + " test");
// Start the COM listening thread.
new Thread(new ThreadStart(com1.Run)).Start();
// Lets set some callbacks.
srv.setInboundMessageNotification(new InboundNotification());
srv.setCallNotification(new CallNotification());
srv.setGatewayStatusNotification(new GatewayStatusNotification());
// Create the Gateway representing the serial GSM modem.
// Due to the Comm2IP bridge, in SMSLib for .NET all modems are considered IP modems.
IPModemGateway gateway = new IPModemGateway("modem.com4", "127.0.0.1", port, manufacturer, modemName);
gateway.setIpProtocol(ModemGateway.IPProtocols.BINARY);
// Set the modem protocol to PDU (alternative is TEXT). PDU is the default, anyway...
gateway.setProtocol(AGateway.Protocols.PDU);
// Do we want the Gateway to be used for Inbound messages?
gateway.setInbound(true);
// Do we want the Gateway to be used for Outbound messages?
gateway.setOutbound(true);
// Let SMSLib know which is the SIM PIN.
gateway.setSimPin("0000");
// Add the Gateway to the Service object.
srv.addGateway(gateway);
// Similarly, you may define as many Gateway objects, representing
// various GSM modems, add them in the Service object and control all of them.
// Start! (i.e. connect to all defined Gateways)
srv.startService();
// Printout some general information about the modem.
Console.WriteLine();
Console.WriteLine("Modem Information:");
Console.WriteLine(" Manufacturer: " + gateway.getManufacturer());
Console.WriteLine(" Model: " + gateway.getModel());
Console.WriteLine(" Serial No: " + gateway.getSerialNo());
Console.WriteLine(" SIM IMSI: " + gateway.getImsi());
Console.WriteLine(" Signal Level: " + gateway.getSignalLevel() + "dBm");
Console.WriteLine(" Battery Level: " + gateway.getBatteryLevel() + "%");
Console.WriteLine();
// Read Messages. The reading is done via the Service object and
// affects all Gateway objects defined. This can also be more directed to a specific
// Gateway - look the JavaDocs for information on the Service method calls.
list = srv.readMessages(org.smslib.InboundMessage.MessageClasses.ALL);
}
catch (Exception e)
{
Console.WriteLine(e.Message);
Console.WriteLine(e.StackTrace);
}
finally
{
com1.Stop();
srv.stopService();
}
return list;
}
