/**
* Connects the Link to the remote Node. Exchanges the NodeIDs
*
* @return True if the Link successfully connected to the remote Link
* @//throws JCSPNetworkException
* Thrown if something goes wrong during the connection
*/
public override Boolean connect()
//throws JCSPNetworkException
{
// First check if we are connected.
if (this.connected)
{
return(true);
}
// Flag to determine if we are connected at the end of the process.
Boolean toReturn = false;
try
{
// Write the string representation of our NodeID to the remote Node
this.txStream.Write(Node.getInstance().getNodeID().toString());
this.txStream.Flush();
// Read in the response from the opposite Node
String response = this.rxStream.ReadString();
// Either the connection has been accepted (no connection to this Node exists on the opposite Node) or
// it has not. The opposite Node sends OK in the first instance.
if (response.Equals("OK", StringComparison.OrdinalIgnoreCase))
{
// The connection is to be kept. Log, and set toReturn to true
Node.log.log(this.GetType(), "Link to " + this.remoteAddress.toString() + " connected");
toReturn = true;
}
// Read in Remote NodeID as string
NodeID otherID = NodeID.parse(this.rxStream.ReadString());
// First check we have a tcpip Node connection. This should always be the case
if (otherID.getNodeAddress() is TCPIPNodeAddress)
{
// Set address and NodeID. If we are not connected then this NodeID can be used to
// get the actual Link from the LinkManager
this.remoteAddress = (TCPIPNodeAddress)otherID.getNodeAddress();
this.remoteID = otherID;
// Set connected to toReturn
this.connected = toReturn;
return(toReturn);
}
// We do not have a tcpip? Should never really happen however. Log and throw Exception
Node.err.log(this.GetType(), "Tried to connect a TCPIPLink to a non TCPIP connection");
throw new JCSPNetworkException("Tried to connect a TCPIPLink to a non TCPIP connection");
}
catch (IOException ioe)
{
// Something went wrong during the connection process. Log and throw exception.
Node.err.log(this.GetType(), "Failed to connect TCPIPLink to: " + this.remoteAddress.getAddress());
throw new JCSPNetworkException("Failed to connect TCPIPLink to: " + this.remoteAddress.getAddress());
}
}
/**
* Creates LinkServer by wrapping round an existing ServerSocket. Used internally by JCSP
*
* @param serverSocket
* The ServerSocket to create the LinkServer with
*/
//internal TCPIPLinkServer(ServerSocket serverSocket)
internal TCPIPLinkServer(Socket serverSocket)
{
// We need to set the NodeAddress. Create from ServerSocket address and port
//TODO double check if thee code below provides the proper values - Karol Pasierb
//this.listeningAddress = new TCPIPNodeAddress(serverSocket.getInetAddress().getHostAddress(), serverSocket.getLocalPort());
IPEndPoint a = (IPEndPoint)serverSocket.LocalEndPoint;
this.listeningAddress = new TCPIPNodeAddress(a.Address.ToString(), a.Port);
this.serv = serverSocket;
}
/**
* Creates new TCPIPLink from a Socket. This is used internally by JCSP
*
* @param socket
* The socket to create the TCPIPLink with
* @param nodeID
* The NodeID of the remote Node
* @//throws JCSPNetworkException
* Thrown if there is a problem during the connection
*/
internal TCPIPLink(Socket socket, NodeID nodeID)
//throws JCSPNetworkException
{
try
{
// Set the socket property
this.socket = socket;
// Set TcpNoDelay
//socket.setTcpNoDelay(!TCPIPLink.NAGLE);
socket.NoDelay = !TCPIPLink.NAGLE;
// Set the input and output streams for the Link
//this.rxStream = new BinaryReader(new BufferedInputStream(socket.getInputStream(), TCPIPLink.BUFFER_SIZE));
//this.txStream = new BinaryWriter(new BufferedOutputStream(socket.getOutputStream(), TCPIPLink.BUFFER_SIZE));
//this.rxStream = new BinaryReader(new BufferedInputStream(this.socket.getInputStream(), TCPIPLink.BUFFER_SIZE));
this.rxStream = new BinaryReader(new NetworkStream(this.socket));
//this.txStream = new BinaryWriter(new BufferedOutputStream(this.socket.getOutputStream(), TCPIPLink.BUFFER_SIZE));
this.txStream = new BinaryWriter(new NetworkStream(this.socket));
// Set the NodeID
this.remoteID = nodeID;
// Set the remote address
this.remoteAddress = (TCPIPNodeAddress)this.remoteID.getNodeAddress();
// Set connected to true
this.connected = true;
// Log Link creation and Link connection
Node.log.log(this.GetType(), "Link created to " + nodeID.toString());
Node.log.log(this.GetType(), "Link to " + nodeID.toString() + " connected");
}
catch (IOException ioe)
{
// Something went wrong during the creation. Log and throw exception
Node.err.log(this.GetType(), "Failed to create Link to " + nodeID.toString());
throw new JCSPNetworkException("Failed to create TCPIPLink to: " +
nodeID.getNodeAddress().getAddress());
}
}
/**
* Initialises the Node, connecting to the CNS / BNS
*
* @param node
* The Node to initialise
* @return A new NodeAddress which the Node is registered at
* @//throws JCSPNetworkException
* Thrown if something goes wrong during the Node initialisation process
*/
internal override NodeAddress initNode(Node node)
//throws JCSPNetworkException
{
// First install TCPIPProtocolID
NodeAddress.installProtocol("tcpip", TCPIPProtocolID.getInstance());
try
{
// Get the local IP addresses
//InetAddress[] local = InetAddress.getAllByName(InetAddress.getLocalHost().getHostName());
IPAddress[] localIPAddresses = GetLocalIPAddress.GetAllAddresses();
//InetAddress toUse = InetAddress.getLocalHost();
IPAddress ipAddresstoUse = GetLocalIPAddress.GetOnlyLocalIPAddress();
// We basically have four types of addresses to worry about. Loopback (127), link local (169),
// local (192) and (possibly) global. Grade each 1, 2, 3, 4 and use highest scoring address. In all
// cases use first address of that score.
int current = 0;
// Loop until we have checked all the addresses
for (int i = 0; i < localIPAddresses.Length; i++)
{
// Ensure we have an IPv4 address
//if (localIPAddresses[i] is Inet4Address)
if (localIPAddresses[i] is IPAddress)
{
// Get the first byte of the address
//byte first = localIPAddresses[i].getAddress()[0];
byte first = localIPAddresses[i].GetAddressBytes()[0];
// Now check the value
if (first == (byte)127 && current < 1)
{
// We have a Loopback address
current = 1;
// Set the address to use
ipAddresstoUse = localIPAddresses[i];
}
else if (first == (byte)169 && current < 2)
{
// We have a link local address
current = 2;
// Set the address to use
ipAddresstoUse = localIPAddresses[i];
}
else if (first == (byte)192 && current < 3)
{
// We have a local address
current = 3;
// Set the address to use
ipAddresstoUse = localIPAddresses[i];
}
else
{
// Assume the address is globally accessible and use by default.
ipAddresstoUse = localIPAddresses[i];
// Break from the loop
break;
}
}
}
// Create a new ServerSocket listening on this address
//TcpClient serv = new TcpClient(0, 10, ipAddresstoUse);
//TcpListener serv = new TcpListener(0, 10, toUse);
Socket serv = new Socket(ipAddresstoUse.AddressFamily, SocketType.Stream, ProtocolType.Tcp);
//ServerSocket serv = new ServerSocket(0, 10, toUse);
IPEndPoint inetAddress = new IPEndPoint(ipAddresstoUse, 10);
// Create the local address
//TCPIPNodeAddress localAddr = new TCPIPNodeAddress(toUse.getHostAddress(), serv.getLocalPort());
TCPIPNodeAddress localAddr = new TCPIPNodeAddress(ipAddresstoUse.ToString(), inetAddress.Port);
// Create and start the LinkServer
TCPIPLinkServer server = new TCPIPLinkServer(serv);
new ProcessManager(server).start();
// Return the NodeAddress
return(localAddr);
}
/*catch (UnknownHostException uhe)
* {
* throw new JCSPNetworkException("Failed to start TCPIPLinkServer. Could not get local IP address.\n"
+ uhe.getMessage());
+ }*/
catch (IOException ioe)
{
throw new JCSPNetworkException("Failed to open new Server Socket.\n" + ioe.Message);
}
}
/**
* Creates a new TCPIPNodeFactory
*
* @param addr
* The address of the CNS / BNS
*/
public TCPIPNodeFactory(TCPIPNodeAddress addr)
{
this.cnsAddress = addr;
}
/**
* Creates a new TCPIPLinkServer listening on the given address
*
* @param address
* The address to listen on for new connections
* @//throws JCSPNetworkException
* Thrown if something goes wrong during the creation of the ServerSocket
*/
public TCPIPLinkServer(TCPIPNodeAddress address)
//throws JCSPNetworkException
{
try
{
// First check if we have an ip address in the string
if (String.IsNullOrEmpty(address.GetIpAddressAsString()))
{
IPAddress localIPAddresstoUse = GetLocalIPAddress.GetOnlyLocalIPAddress();
IPAddress[] localIPAddresses = GetLocalIPAddress.GetAllAddresses();
address.setIpAddress(GetLocalIPAddress.ConvertIPAddressToString(localIPAddresstoUse));
// Get the local IP addresses
//InetAddress[] local = InetAddress.getAllByName(InetAddress.getLocalHost().getHostName());
//InetAddress toUse = InetAddress.getLocalHost();
//TODO the code below is not updated and not working correctly.
// We basically have four types of addresses to worry about. Loopback (127), link local (169),
// local (192) and (possibly) global. Grade each 1, 2, 3, 4 and use highest scoring address. In all
// cases use first address of that score.
int current = 0;
// Loop until we have checked all the addresses
for (int i = 0; i < localIPAddresses.Length; i++)
{
// Ensure we have an IPv4 address
//if (local[i] is Inet4Address)
if (localIPAddresses[i] is IPAddress)
{
// Get the first byte of the address
//byte first = local[i].getAddress()[0];
byte first = localIPAddresses[i].GetAddressBytes()[0];
// Now check the value
if (first == (byte)127 && current < 1)
{
// We have a Loopback address
current = 1;
// Set the address to use
localIPAddresstoUse = localIPAddresses[i];
}
else if (first == (byte)169 && current < 2)
{
// We have a link local address
current = 2;
// Set the address to use
localIPAddresstoUse = localIPAddresses[i];
}
else if (first == (byte)192 && current < 3)
{
// We have a local address
current = 3;
// Set the address to use
localIPAddresstoUse = localIPAddresses[i];
}
else
{
// Assume the address is globally accessible and use by default.
localIPAddresstoUse = localIPAddresses[i];
// Break from the loop
break;
}
}
}
// Now set the IP address of the address
//address.setIpAddress(toUse.getHostAddress());
//address.setIpAddress(localIPAddresstoUse.ToString());
// Set the address part now, but it may change if we have to get a port number
//address.setAddress(address.GetIpAddressAsString() + ":" + address.getPort());
}
// Now check if the address has a port number
if (address.getPort() == 0)
{
// No port number supplied. Get one as we create the ServerSocket
//InetAddress socketAddress = InetAddress.getByName(address.GetIpAddressAsString());
//SocketAddress socketAddress = new SocketAddress(AddressFamily.InterNetwork);
IPEndPoint socketEndPoint =
new IPEndPoint(IPAddress.Parse(address.GetIpAddressAsString()),
0); //port 0 as in Java's implementation
// Create the server socket with a random port
//this.serv = new ServerSocket(0, 0, socketAddress);
//this.serv = new TcpListener(localIPAddresstoUse.AddressFamily, SocketType.Stream, ProtocolType.Tcp);
this.serv = new Socket(socketEndPoint.AddressFamily, SocketType.Stream, ProtocolType.Tcp);
this.serv.Bind(socketEndPoint);
this.serv.Listen(0);
// Assign the port to the address
//address.setPort(this.serv.getLocalPort());
address.setPort(socketEndPoint.Port);
// And set the address
address.setAddress(address.GetIpAddressAsString() + ":" + address.getPort());
// Set the listening address
this.listeningAddress = address;
}
else
{
// Create an IP address from the NodeAddress
IPEndPoint inetAddress = new IPEndPoint(IPAddress.Parse(address.GetIpAddressAsString()),
address.getPort());
// Now create the ServerSocket
this.serv = new Socket(inetAddress.AddressFamily, SocketType.Stream, ProtocolType.Tcp);
//Bind server to the ip address - Karol Pasierb
this.serv.Bind(inetAddress);
this.serv.Listen(10); //backlog 10 for the queue - Karol Pasierb
// Set listeningAddress
this.listeningAddress = address;
}
}
catch (IOException ioe)
{
throw new JCSPNetworkException("Failed to create TCPIPLinkServer on: " + address.getAddress());
}
}
/**
* Creates a new TCPIPLink
*
* @param address
* The address of the remote Node to connect to
* @//throws JCSPNetworkException
* Thrown if something goes wrong during the creation process
*/
public TCPIPLink(TCPIPNodeAddress address)
//throws JCSPNetworkException
{
try
{
// First check if we have an ip address in the string. If not, we assume that this is to be connected
// to the local machine but to a different JVM
if (String.IsNullOrEmpty(address.GetIpAddressAsString()))
{
IPAddress[] localIPAddresses = GetLocalIPAddress.GetAllAddresses();
IPAddress ipAddresstoUse = GetLocalIPAddress.GetOnlyLocalIPAddress();
address.setIpAddress(GetLocalIPAddress.ConvertIPAddressToString(ipAddresstoUse));
//TODO the code below is not updated and not working correctly.
// We basically have four types of addresses to worry about. Loopback (127), link local (169),
// local (192) and (possibly) global. Grade each 1, 2, 3, 4 and use highest scoring address. In all
// cases use first address of that score.
int current = 0;
// Loop until we have checked all the addresses
for (int i = 0; i < localIPAddresses.Length; i++)
{
// Ensure we have an IPv4 address
if (localIPAddresses[i] is IPAddress)
{
// Get the first byte of the address
//byte first = localIPAddresses[i].getAddress()[0];
byte first = localIPAddresses[i].GetAddressBytes()[0];
// Now check the value
if (first == (byte)127 && current < 1)
{
// We have a Loopback address
current = 1;
// Set the address to use
ipAddresstoUse = localIPAddresses[i];
}
else if (first == (byte)169 && current < 2)
{
// We have a link local address
current = 2;
// Set the address to use
ipAddresstoUse = localIPAddresses[i];
}
else if (first == (byte)192 && current < 3)
{
// We have a local address
current = 3;
// Set the address to use
ipAddresstoUse = localIPAddresses[i];
}
else
{
// Assume the address is globally accessible and use by default.
ipAddresstoUse = localIPAddresses[i];
// Break from the loop
break;
}
}
}
// Now set the IP address of the address
//address.setIpAddress(ipAddresstoUse.ToString());
// Set the address part.
//address.setAddress(address.GetIpAddressAsString() + ":" + address.getPort());
}
// Connect the socket to the server socket on the remote Node
IPAddress remoteAddress = IPAddress.Parse(address.GetIpAddressAsString());
this.socket = new Socket(remoteAddress.AddressFamily, SocketType.Stream, ProtocolType.Tcp);
EndPoint remoteEndPoint = new IPEndPoint(remoteAddress, address.getPort());
// Set TcpNoDelay. Off should improve performance for smaller packet sizes, which JCSP should have in general
this.socket.NoDelay = !TCPIPLink.NAGLE;
this.socket.Connect(remoteEndPoint);
// Create the input and output streams for the Link
this.rxStream = new BinaryReader(new NetworkStream(this.socket));
this.txStream = new BinaryWriter(new NetworkStream(this.socket));
// Set the remote address
this.remoteAddress = address;
// We are not connected, so set connected to false.
this.connected = false;
// Log Node connection
Node.log.log(this.GetType(), "Link created to " + address.toString());
}
catch (IOException ioe)
{
// Something went wrong during connection. Log and throw exception
Node.err.log(this.GetType(), "Failed to create Link to " + address.toString());
throw new JCSPNetworkException("Failed to create TCPIPLink to: " + address.getAddress());
}
}
/**
* @param args
* @//throws Exception
*/
public static void main(String[] args)
//throws Exception
{
Node.getInstance().setLog(new StreamWriter(Console.OpenStandardOutput()));
Node.getInstance().setErr(new StreamWriter(Console.OpenStandardError()));
// Get the local IP addresses
IPAddress[] localIPAddresses = GetLocalIPAddress.GetAllAddresses();
IPAddress ipAddresstoUse = GetLocalIPAddress.GetOnlyLocalIPAddress();
// We basically have four types of addresses to worry about. Loopback (127), link local (169),
// local (192) and (possibly) global. Grade each 1, 2, 3, 4 and use highest scoring address. In all
// cases use first address of that score.
int current = 0;
// Loop until we have checked all the addresses
for (int i = 0; i < localIPAddresses.Length; i++)
{
// Ensure we have an IPv4 address
if (localIPAddresses[i] is IPAddress)
{
// Get the first byte of the address
//byte first = localIPAddresses[i].getAddress()[0];
byte first = localIPAddresses[i].GetAddressBytes()[0];
// Now check the value
if (first == (byte)127 && current < 1)
{
// We have a Loopback address
current = 1;
// Set the address to use
ipAddresstoUse = localIPAddresses[i];
}
else if (first == (byte)169 && current < 2)
{
// We have a link local address
current = 2;
// Set the address to use
ipAddresstoUse = localIPAddresses[i];
}
else if (first == (byte)192 && current < 3)
{
// We have a local address
current = 3;
// Set the address to use
ipAddresstoUse = localIPAddresses[i];
}
else
{
// Assume the address is globally accessible and use by default.
ipAddresstoUse = localIPAddresses[i];
// Break from the loop
break;
}
}
}
// Create a local address object
TCPIPNodeAddress localAddr = new TCPIPNodeAddress(ipAddresstoUse.ToString(), 7890);
// Initialise the Node
Node.getInstance().init(localAddr);
// Start CNS and BNS
IamCSProcess[] processes = { CNS.CNS.getInstance(), BNS.BNS.getInstance() };
new CSPParallel(processes).run();
}