|
public static FindIncidentEdge ( Box2DX.Collision.ClipVertex &c, |
||
| c | Box2DX.Collision.ClipVertex | |
| poly1 | ||
| xf1 | Box2DX.Common.Transform | |
| edge1 | int | |
| poly2 | ||
| xf2 | Box2DX.Common.Transform | |
| Результат | void | |
// Find edge normal of max separation on A - return if separating axis is found
// Find edge normal of max separation on B - return if separation axis is found
// Choose reference edge as min(minA, minB)
// Find incident edge
// Clip
// The normal points from 1 to 2
public static void CollidePolygons(ref Manifold manifold,
PolygonShape polyA, Transform xfA, PolygonShape polyB, Transform xfB)
{
manifold.PointCount = 0;
float totalRadius = polyA._radius + polyB._radius;
int edgeA = 0;
float separationA = Collision.FindMaxSeparation(ref edgeA, polyA, xfA, polyB, xfB);
if (separationA > totalRadius)
{
return;
}
int edgeB = 0;
float separationB = Collision.FindMaxSeparation(ref edgeB, polyB, xfB, polyA, xfA);
if (separationB > totalRadius)
{
return;
}
PolygonShape poly1; // reference poly
PolygonShape poly2; // incident poly
Transform xf1, xf2;
int edge1; // reference edge
byte flip;
const float k_relativeTol = 0.98f;
const float k_absoluteTol = 0.001f;
if (separationB > k_relativeTol * separationA + k_absoluteTol)
{
poly1 = polyB;
poly2 = polyA;
xf1 = xfB;
xf2 = xfA;
edge1 = edgeB;
manifold.Type = ManifoldType.FaceB;
flip = 1;
}
else
{
poly1 = polyA;
poly2 = polyB;
xf1 = xfA;
xf2 = xfB;
edge1 = edgeA;
manifold.Type = ManifoldType.FaceA;
flip = 0;
}
ClipVertex[] incidentEdge;
Collision.FindIncidentEdge(out incidentEdge, poly1, xf1, edge1, poly2, xf2);
int count1 = poly1._vertexCount;
Vector2[] vertices1 = poly1._vertices;
Vector2 v11 = vertices1[edge1];
Vector2 v12 = edge1 + 1 < count1 ? vertices1[edge1 + 1] : vertices1[0];
Vector2 dv = v12 - v11;
Vector2 localNormal = dv.CrossScalarPostMultiply(1.0f);
localNormal.Normalize();
Vector2 planePoint = 0.5f * (v11 + v12);
Vector2 sideNormal = xf1.TransformDirection(v12 - v11);
sideNormal.Normalize();
Vector2 frontNormal = sideNormal.CrossScalarPostMultiply(1.0f);
v11 = Common.Math.Mul(xf1, v11);
v12 = Common.Math.Mul(xf1, v12);
float frontOffset = Vector2.Dot(frontNormal, v11);
float sideOffset1 = -Vector2.Dot(sideNormal, v11);
float sideOffset2 = Vector2.Dot(sideNormal, v12);
// Clip incident edge against extruded edge1 side edges.
ClipVertex[] clipPoints1;
ClipVertex[] clipPoints2;
int np;
// Clip to box side 1
np = Collision.ClipSegmentToLine(out clipPoints1, incidentEdge, -sideNormal, sideOffset1);
if (np < 2)
{
return;
}
// Clip to negative box side 1
np = ClipSegmentToLine(out clipPoints2, clipPoints1, sideNormal, sideOffset2);
if (np < 2)
{
return;
}
// Now clipPoints2 contains the clipped points.
manifold.LocalPlaneNormal = localNormal;
manifold.LocalPoint = planePoint;
int pointCount = 0;
for (int i = 0; i < Settings.MaxManifoldPoints; ++i)
{
float separation = Vector2.Dot(frontNormal, clipPoints2[i].V) - frontOffset;
if (separation <= totalRadius)
{
ManifoldPoint cp = manifold.Points[pointCount];
cp.LocalPoint = xf2.InverseTransformPoint(clipPoints2[i].V);
cp.ID = clipPoints2[i].ID;
cp.ID.Features.Flip = flip;
++pointCount;
}
}
manifold.PointCount = pointCount;
}
// Find edge normal of max separation on A - return if separating axis is found
// Find edge normal of max separation on B - return if separation axis is found
// Choose reference edge as min(minA, minB)
// Find incident edge
// Clip
// The normal points from 1 to 2
public static void CollidePolygons(ref Manifold manifold,
PolygonShape polyA, XForm xfA, PolygonShape polyB, XForm xfB)
{
manifold.PointCount = 0;
int edgeA = 0;
float separationA = Collision.FindMaxSeparation(ref edgeA, polyA, xfA, polyB, xfB);
if (separationA > 0.0f)
{
return;
}
int edgeB = 0;
float separationB = Collision.FindMaxSeparation(ref edgeB, polyB, xfB, polyA, xfA);
if (separationB > 0.0f)
{
return;
}
PolygonShape poly1; // reference poly
PolygonShape poly2; // incident poly
XForm xf1, xf2;
int edge1; // reference edge
byte flip;
float k_relativeTol = 0.98f;
float k_absoluteTol = 0.001f;
// TODO_ERIN use "radius" of poly for absolute tolerance.
if (separationB > k_relativeTol * separationA + k_absoluteTol)
{
poly1 = polyB;
poly2 = polyA;
xf1 = xfB;
xf2 = xfA;
edge1 = edgeB;
flip = 1;
}
else
{
poly1 = polyA;
poly2 = polyB;
xf1 = xfA;
xf2 = xfB;
edge1 = edgeA;
flip = 0;
}
ClipVertex[] incidentEdge;
Collision.FindIncidentEdge(out incidentEdge, poly1, xf1, edge1, poly2, xf2);
int count1 = poly1.VertexCount;
Vec2[] vertices1 = poly1.GetVertices();
Vec2 v11 = vertices1[edge1];
Vec2 v12 = edge1 + 1 < count1 ? vertices1[edge1 + 1] : vertices1[0];
Vec2 dv = v12 - v11;
Vec2 sideNormal = Common.Math.Mul(xf1.R, v12 - v11);
sideNormal.Normalize();
Vec2 frontNormal = Vec2.Cross(sideNormal, 1.0f);
v11 = Common.Math.Mul(xf1, v11);
v12 = Common.Math.Mul(xf1, v12);
float frontOffset = Vec2.Dot(frontNormal, v11);
float sideOffset1 = -Vec2.Dot(sideNormal, v11);
float sideOffset2 = Vec2.Dot(sideNormal, v12);
// Clip incident edge against extruded edge1 side edges.
ClipVertex[] clipPoints1;
ClipVertex[] clipPoints2;
int np;
// Clip to box side 1
np = Collision.ClipSegmentToLine(out clipPoints1, incidentEdge, -sideNormal, sideOffset1);
if (np < 2)
{
return;
}
// Clip to negative box side 1
np = ClipSegmentToLine(out clipPoints2, clipPoints1, sideNormal, sideOffset2);
if (np < 2)
{
return;
}
// Now clipPoints2 contains the clipped points.
manifold.Normal = flip != 0 ? -frontNormal : frontNormal;
int pointCount = 0;
for (int i = 0; i < Settings.MaxManifoldPoints; ++i)
{
float separation = Vec2.Dot(frontNormal, clipPoints2[i].V) - frontOffset;
if (separation <= 0.0f)
{
ManifoldPoint cp = manifold.Points[pointCount];
cp.Separation = separation;
cp.LocalPoint1 = Box2DX.Common.Math.MulT(xfA, clipPoints2[i].V);
cp.LocalPoint2 = Box2DX.Common.Math.MulT(xfB, clipPoints2[i].V);
cp.ID = clipPoints2[i].ID;
cp.ID.Features.Flip = flip;
++pointCount;
}
}
manifold.PointCount = pointCount;
}