public override bool Test()
{
if (AnalysisInputParameters(inputParameters) == false)
{
return(false);
}
if (!CloseandOpenAPC(Convert.ToByte(APCMODE.IBAISandIMODON)))
{
return(false); //开启APC
}
if (ReadyData())
{
return(true);//已经填充好了数据,后面不用测试
}
else// 没提前准备好数据,需要实际测量
{
Log.SaveLogToTxt("Step3...SetAttenValue");
Log.SaveLogToTxt("Step4...AutoAlaign");
bool isAutoAlaign = pED.AutoAlaign(true);
if (isAutoAlaign)
{
Log.SaveLogToTxt(isAutoAlaign.ToString());
}
else
{
Log.SaveLogToTxt(isAutoAlaign.ToString());
Ber = 1;
logoStr = "";
return(isAutoAlaign);
}
if (flagSingleTest)
{
SingleChannelTest();
}
else
{
MultChannelTest();
}
}
return(true);
}
protected override bool StartTest()
{
RxPowerArray.Clear();
BerArray.Clear();
logoStr = "";
if (AnalysisInputParameters(inputParameters) == false)
{
OutPutandFlushLog();
return(false);
}
//if (testRxOverloadStruct.IsOptSourceUnitOMA)
//{
// testRxOverloadStruct.SpecDelta = Algorithm.CalculateFromOMAtoDBM(testRxOverloadStruct.SpecDelta, Convert.ToDouble(OSERValueArray[GlobalParameters.CurrentChannel - 1]));
// testRxOverloadStruct.SpecDelta = Math.Round(testRxOverloadStruct.SpecDelta, 4);
// testRxOverloadStruct.CsenAlignRxPwr = Algorithm.CalculateFromOMAtoDBM(testRxOverloadStruct.CsenAlignRxPwr, Convert.ToDouble(OSERValueArray[GlobalParameters.CurrentChannel - 1]));
// testRxOverloadStruct.CsenAlignRxPwr = Math.Round(testRxOverloadStruct.CsenAlignRxPwr, 4);
//}
if (tempAtten != null && tempED != null && tempps != null)
{
// open apc
{
CloseandOpenAPC(Convert.ToByte(APCMODE.IBAISandIMODON));
}
// open apc
//tempAtten.SetAllChannnel_RxOverLoad(10);
Log.SaveLogToTxt("Step2...SetAttenValue");
tempAtten.AttnValue(testRxOverloadStruct.CsenAlignRxPwr.ToString());
Log.SaveLogToTxt("Step3...AutoAlaign");
bool isAutoAlaign = tempED.AutoAlaign(true);
if (isAutoAlaign)
{
Log.SaveLogToTxt(isAutoAlaign.ToString());
Log.SaveLogToTxt("Step4...StartTestRxOverload");
double ber = -1;
int i = 0;
int LoopCount;
double RxPower = 0;
double countMol = testRxOverloadStruct.LoopTime % testRxOverloadStruct.GatingTime;
if (countMol == 0)
{
LoopCount = Convert.ToInt32(testRxOverloadStruct.LoopTime / testRxOverloadStruct.GatingTime);
}
else
{
LoopCount = Convert.ToInt32((testRxOverloadStruct.LoopTime - countMol) / testRxOverloadStruct.GatingTime) + 1;
}
double startPower = 0;
if (tempAtten.offsetlist.ContainsKey(tempAtten.CurrentChannel))
{
startPower = Convert.ToDouble(tempAtten.offsetlist[tempAtten.CurrentChannel]);
}
do
{
RxPower = startPower - testRxOverloadStruct.AttStep * i;
if (RxPower < testRxOverloadStruct.CsenAlignRxPwr)
{
OverloadPoint = testRxOverloadStruct.CsenAlignRxPwr;
Log.SaveLogToTxt("Can't find OverloadPoint...");
break;
}
else
{
tempAtten.AttnValue(RxPower.ToString());
RxPowerArray.Add(RxPower);
Log.SaveLogToTxt("SetAtten=" + RxPower.ToString());
tempED.EdGatingStart(); //刷新误码数
for (int j = 0; j < LoopCount; j++)
{
Thread.Sleep(Convert.ToInt32(testRxOverloadStruct.GatingTime * 1000));
ber = tempED.QureyEdErrorRatio();
Log.SaveLogToTxt("Ber=" + ber.ToString());
if (ber != 0)
{
BerArray.Add(ber);
break;
}
else
{
if (j == LoopCount - 1)
{
BerArray.Add(ber);
}
}
}
}
i++;
}while (ber != 0);
if (ber == 0 && i != 1)
{
i = 0;
startPower = RxPower + testRxOverloadStruct.AttStep;
do
{
RxPower = startPower - 0.2 * i;
if (RxPower < testRxOverloadStruct.CsenAlignRxPwr)
{
OverloadPoint = testRxOverloadStruct.CsenAlignRxPwr;
Log.SaveLogToTxt("Can't find OverloadPoint...");
break;
}
else
{
tempAtten.AttnValue(RxPower.ToString());
RxPowerArray.Add(RxPower);
Log.SaveLogToTxt("SetAtten=" + RxPower.ToString());
tempED.EdGatingStart(); //刷新误码数
for (int j = 0; j < LoopCount; j++)
{
Thread.Sleep(Convert.ToInt32(testRxOverloadStruct.GatingTime * 1000));
ber = tempED.QureyEdErrorRatio();
Log.SaveLogToTxt("Ber=" + ber.ToString());
if (ber != 0)
{
BerArray.Add(ber);
break;
}
else
{
if (j == LoopCount - 1)
{
BerArray.Add(ber);
}
}
}
}
i++;
}while (ber != 0);
if (ber == 0)
{
OverloadPoint = RxPower;
Log.SaveLogToTxt("OverloadPoint= " + OverloadPoint.ToString());
}
}
else //光源点无误码
{
OverloadPoint = RxPower;
Log.SaveLogToTxt("OverloadPoint= " + OverloadPoint.ToString() + " LightSource= " + OverloadPoint.ToString());
}
OutPutandFlushLog();
return(true);
}
else
{
Log.SaveLogToTxt(isAutoAlaign.ToString());
OverloadPoint = -1000;
OutPutandFlushLog();
return(isAutoAlaign);
}
}
else
{
Log.SaveLogToTxt("Equipments are not enough!");
AnalysisOutputProcData(procData);
AnalysisOutputParameters(outputParameters);
return(false);
}
}
protected override bool StartTest()
{
logger.FlushLogBuffer();
logoStr = "";
if (AnalysisInputParameters(inputParameters) == false)
{
return(false);
}
if (selectedEquipList["ATTEN"] != null && selectedEquipList["ERRORDETE"] != null && selectedEquipList["DUT"] != null && selectedEquipList["POWERSUPPLY"] != null)
{
Powersupply tempps = (Powersupply)selectedEquipList["POWERSUPPLY"];
// open apc
string apcstring = null;
dut.APCStatus(out apcstring);
if (apcstring == "OFF" || apcstring == "FF")
{
logoStr += logger.AdapterLogString(0, "Step2...Start Open apc");
dut.APCON();
logoStr += logger.AdapterLogString(0, "Power off");
tempps.Switch(false);
Thread.Sleep(200);
logoStr += logger.AdapterLogString(0, "Power on");
tempps.Switch(true);
Thread.Sleep(200);
bool isOpen = dut.APCStatus(out apcstring);
if (apcstring == "ON")
{
logoStr += logger.AdapterLogString(1, "APC ON");
}
else
{
logoStr += logger.AdapterLogString(3, "APC NOT ON");
}
}
// open apc
Attennuator tempAtten = (Attennuator)selectedEquipList["ATTEN"];
ErrorDetector tempED = (ErrorDetector)selectedEquipList["ERRORDETE"];
logoStr += logger.AdapterLogString(0, "Step3...SetAttenValue");
SetAttenValue(tempAtten, testBerStruct.CsenAlignRxPwr);
Thread.Sleep(200);
tempAtten.Switch(true);
double attPoint = 0;
logoStr += logger.AdapterLogString(0, "Step4...AutoAlaign");
bool isAutoAlaign = tempED.AutoAlaign(true);
if (isAutoAlaign)
{
logoStr += logger.AdapterLogString(1, isAutoAlaign.ToString());
}
else
{
logoStr += logger.AdapterLogString(4, isAutoAlaign.ToString());
logger.FlushLogBuffer();
return(isAutoAlaign);
}
if (isAutoAlaign)
{
if (testBerStruct.IsBerQuickTest == true)
{
tempAtten.AttnValue(testBerStruct.CsenStartingRxPwr.ToString());
Thread.Sleep(200);
double sensitivity = tempED.GetErrorRate();
logoStr += logger.AdapterLogString(1, "SetAtten=" + testBerStruct.CsenStartingRxPwr.ToString());
if (sensitivity.ToString().ToUpper().Trim() == "NAN")
{
sensitivityPoint = -1000;
AnalysisOutputParameters(outputParameters);
logger.FlushLogBuffer();
return(false);
}
if (testBerStruct.CsenTargetBER == 1E-3)
{
if (sensitivity <= 1E-3)
{
sensitivityPoint = testBerStruct.CsenStartingRxPwr;
}
else
{
sensitivityPoint = -1000;
logoStr += logger.AdapterLogString(4, "AttPoint=" + testBerStruct.CsenStartingRxPwr.ToString() + "CSENCE>1E-3 ");
AnalysisOutputParameters(outputParameters);
logger.FlushLogBuffer();
return(false);
}
}
else if (testBerStruct.CsenTargetBER == 1E-12)
{
if (sensitivity <= 1E-12)
{
sensitivityPoint = testBerStruct.CsenStartingRxPwr;
}
else
{
sensitivityPoint = -1000;
logoStr += logger.AdapterLogString(4, "AttPoint=" + testBerStruct.CsenStartingRxPwr.ToString() + "CSENCE>1E-12 ");
AnalysisOutputParameters(outputParameters);
logger.FlushLogBuffer();
return(false);
}
}
sensitivityPoint = Math.Round(sensitivityPoint, 2);
logoStr += logger.AdapterLogString(1, "sensitivityPoint= " + sensitivityPoint.ToString());
AnalysisOutputParameters(outputParameters);
logger.FlushLogBuffer();
return(true);
}
else
{
logoStr += logger.AdapterLogString(0, "Step5...SerchTargetPoint");
attPoint = SerchTargetPoint(tempAtten, tempED, testBerStruct.CsenStartingRxPwr, testBerStruct.SearchTargetBerLL, testBerStruct.SearchTargetBerUL, testBerStruct.SearchTargetBerAddStep, testBerStruct.SearchTargetBerSubStep);
logoStr += logger.AdapterLogString(1, "SetAtten=" + attPoint.ToString());
ArrayList attPoints;
ArrayList berPoints;
double intercept;
double slope;
logoStr += logger.AdapterLogString(0, "Step6...SerchCoefPoints");
if (testBerStruct.CsenTargetBER == 1E-3)
{
SerchCoefPointsTarget1E3(tempAtten, tempED, attPoint, testBerStruct.CsenTargetBER, testBerStruct.CoefCsenSubStep, testBerStruct.CoefCsenAddStep, out attPoints, out berPoints);
byte tmepCount = (byte)Math.Min(attPoints.Count, berPoints.Count);
double[] tempattPoints = new double[tmepCount];
double[] tempberPoints = new double[tmepCount];
for (byte i = 0; i < tmepCount; i++)
{
tempattPoints[i] = double.Parse(attPoints[i].ToString());
tempberPoints[i] = double.Parse(berPoints[i].ToString());
logoStr += logger.AdapterLogString(1, "attPoints[ " + i.ToString() + "]" + double.Parse(attPoints[i].ToString()) + " " + "berPoints[ " + i.ToString() + "]" + double.Parse(berPoints[i].ToString()));
}
algorithm.LinearRegression(algorithm.Getlog10(algorithm.GetNegative(algorithm.Getlog10(tempberPoints))), tempattPoints, out slope, out intercept);
sensitivityPoint = slope + (intercept * System.Math.Log10(System.Math.Log10(testBerStruct.CsenTargetBER) * (-1)));
}
else if (testBerStruct.CsenTargetBER == 1E-12)
{
SerchCoefPoints1E12(tempAtten, tempED, attPoint, testBerStruct.CsenTargetBER, testBerStruct.CoefCsenSubStep, testBerStruct.CoefCsenAddStep, out attPoints, out berPoints);
byte tmepCount = (byte)Math.Min(attPoints.Count, berPoints.Count);
double[] tempattPoints = new double[tmepCount];
double[] tempberPoints = new double[tmepCount];
for (byte i = 0; i < tmepCount; i++)
{
tempattPoints[i] = double.Parse(attPoints[i].ToString());
tempberPoints[i] = double.Parse(berPoints[i].ToString());
logoStr += logger.AdapterLogString(1, "attPoints[ " + i.ToString() + "]" + double.Parse(attPoints[i].ToString()) + " " + "berPoints[ " + i.ToString() + "]" + double.Parse(berPoints[i].ToString()));
}
algorithm.LinearRegression(algorithm.Getlog10(algorithm.GetNegative(algorithm.Getlog10(tempberPoints))), tempattPoints, out slope, out intercept);
sensitivityPoint = slope + (intercept * System.Math.Log10(System.Math.Log10(testBerStruct.CsenTargetBER) * (-1)));
}
if (sensitivityPoint.ToString().ToUpper().Trim() == "NAN")
{
sensitivityPoint = -1000;
AnalysisOutputParameters(outputParameters);
logger.FlushLogBuffer();
return(false);
}
sensitivityPoint = Math.Round(sensitivityPoint, 2);
logoStr += logger.AdapterLogString(1, "sensitivityPoint= " + sensitivityPoint.ToString());
AnalysisOutputParameters(outputParameters);
logger.FlushLogBuffer();
return(true);
}
}
else
{
logger.FlushLogBuffer();
return(false);
}
}
else
{
logoStr += logger.AdapterLogString(4, "Equipments is not enough!");
logger.FlushLogBuffer();
return(false);
}
}
public override bool Test()
{
logoStr = "";
GenerateSpecList(SpecNameArray);
AddCurrentTemprature();
if (AnalysisInputParameters(inputParameters) == false)
{
OutPutandFlushLog();
return(false);
}
if (!LoadPNSpec())
{
OutPutandFlushLog();
return(false);
}
if (pED != null && pAtt != null && pPS != null)
{
// close apc
{
CloseandOpenAPC(Convert.ToByte(APCMODE.IBAISandIMODOFF));
}
// close apc
bool isAutoAlaign = pED.AutoAlaign(true);
if (isAutoAlaign)
{
Log.SaveLogToTxt(isAutoAlaign.ToString());
}
else
{
Log.SaveLogToTxt(isAutoAlaign.ToString());
OutPutandFlushLog();
return(isAutoAlaign);
}
pAtt.AttnValue(adjustAPDStruct.RxInputPower.ToString());
ArrayList serchTargetAtts = new ArrayList();
ArrayList serchTargetBers = new ArrayList();
serchTargetAtts.Clear();
serchTargetBers.Clear();
switch (adjustAPDStruct.AdjustMethod)
{
case 1:
if (!AdjustAPDMethod1())
{
return(false);
}
break;
default:
if (!AdjustAPDMethod1())
{
return(false);
}
break;
}
DataRow dr = dtProcess.NewRow();
dr["Temp"] = GlobalParameters.CurrentTemp;
dr["Channel"] = GlobalParameters.CurrentChannel;
dr["APDDAC"] = targetApd;
ushort k;
switch (adjustAPDStruct.Formula_X_Type)
{ //0=TempAdc;1=ApdTempAdc;2=Current*256
case 0:
dut.ReadTempADC(out k);
dr["Formula_X"] = k;
break;
case 1:
int TempK;
dut.ReadAPDTempAdc(out TempK);
dr["Formula_X"] = TempK;
break;
default:
dut.ReadTempADC(out k);
dr["Formula_X"] = k;
break;
}
//dr["Formula_X"] = k;
dtProcess.Rows.Add(dr);
if (!CurveAPDandWriteCoefs())
{
OutPutandFlushLog();
}
OutPutandFlushLog();
return(true);
}
else
{
Log.SaveLogToTxt("Equipments are not enough!");
isApdAdjustOK = false;
OutPutandFlushLog();
return(isApdAdjustOK);
}
}
protected override bool StartTest()
{
lock (tempAtten)
{
logoStr = "";
if (AnalysisInputParameters(inputParameters) == false)
{
OutPutandFlushLog();
return(false);
}
GlobalBER_EXPtoRealBer();
if (testBerStruct.IsOpticalSourceUnitOMA)
{
testBerStruct.CsenAlignRxPwr = Algorithm.CalculateFromOMAtoDBM(testBerStruct.CsenAlignRxPwr, Convert.ToDouble(OSERValueArray[GlobalParameters.CurrentChannel - 1]));
testBerStruct.CsenStartingRxPwr = Algorithm.CalculateFromOMAtoDBM(testBerStruct.CsenStartingRxPwr, Convert.ToDouble(OSERValueArray[GlobalParameters.CurrentChannel - 1]));
testBerStruct.FirstPointRxPowerUL = Algorithm.CalculateFromOMAtoDBM(testBerStruct.FirstPointRxPowerUL, Convert.ToDouble(OSERValueArray[GlobalParameters.CurrentChannel - 1]));
testBerStruct.FirstPointRxPowerLL = Algorithm.CalculateFromOMAtoDBM(testBerStruct.FirstPointRxPowerLL, Convert.ToDouble(OSERValueArray[GlobalParameters.CurrentChannel - 1]));
}
if (tempAtten != null && tempED != null && tempps != null)
{
// open apc
{
CloseandOpenAPC(Convert.ToByte(APCMODE.IBAISandIMODON));
}
// open apc
Log.SaveLogToTxt("Step3...SetAttenValue");
SetAttenValue(tempAtten, testBerStruct.CsenAlignRxPwr);
Log.SaveLogToTxt("Step4...AutoAlaign");
bool isAutoAlaign = tempED.AutoAlaign(true);
if (isAutoAlaign)
{
Log.SaveLogToTxt(isAutoAlaign.ToString());
}
else
{
Log.SaveLogToTxt(isAutoAlaign.ToString());
sensitivityPoint = -5000;
OutPutandFlushLog();
return(isAutoAlaign);
}
if (isAutoAlaign)
{
if (testBerStruct.IsBerQuickTest == true)
{
QuickTest(tempAtten, tempED);
OutPutandFlushLog();
return(true);
}
else
{
if (!SerchTargetBer(tempAtten, tempED))
{
OutPutandFlushLog();
return(true);
}
GettingCurvingPointsandFitting(tempAtten, tempED);
if (double.IsNaN(sensitivityPoint) || double.IsInfinity(sensitivityPoint))
{
sensitivityPoint = -1000;
OutPutandFlushLog();
}
sensitivityPoint = Math.Round(sensitivityPoint, 2);
Log.SaveLogToTxt("sensitivityPoint= " + sensitivityPoint.ToString());
OutPutandFlushLog();
return(true);
}
}
else
{
AnalysisOutputProcData(procData);
AnalysisOutputParameters(outputParameters);
return(false);
}
}
else
{
Log.SaveLogToTxt("Equipments are not enough!");
AnalysisOutputProcData(procData);
AnalysisOutputParameters(outputParameters);
return(false);
}
}
}
protected override bool StartTest()
{
RxPowerArray.Clear();
BerArrayRX.Clear();
TxPowerArray.Clear();
BerArrayTX.Clear();
logoStr = "";
if (AnalysisInputParameters(inputParameters) == false)
{
OutPutandFlushLog();
return(false);
}
if (tempED != null && tempAttenRX != null && tempAttenTX != null && tempPowerMeter != null && tempps != null)
{
if (!CloseandOpenAPC(Convert.ToByte(APCMODE.IBAISandIMODON)))
{
return(false); //开启APC
}
if (!tempPPG.ConfigurePrbsLength(Convert.ToByte(testTxReturnLostToleranceStruct.ReturnLosTolerancePRBS)))
{
return(false); //Bert码型为PRBS31
}
//if (!SetTargetPower(testTxReturnLostToleranceStruct.TargetPower)) return false; //调节反射器处的衰减器，使光功率计值降TargetPower以下
tempAttenTX.OutPutSwitch(false);
Log.SaveLogToTxt("Step2...SetAttenValue");
tempAttenRX.AttnValue(testTxReturnLostToleranceStruct.CsenAlignRxPwr.ToString());
Log.SaveLogToTxt("Step3...AutoAlaign");
bool isAutoAlaign = tempED.AutoAlaign(true);
if (isAutoAlaign)
{
Log.SaveLogToTxt(isAutoAlaign.ToString());
Log.SaveLogToTxt("Step4...TestTxReturnLostTolerance");
double ber = -1;
int i = 0;
double RxPower = 0;
int LoopCount = 0;
double countMol = testTxReturnLostToleranceStruct.LoopTime % testTxReturnLostToleranceStruct.GatingTime;
if (countMol == 0)
{
LoopCount = Convert.ToInt32(testTxReturnLostToleranceStruct.LoopTime / testTxReturnLostToleranceStruct.GatingTime);
}
else
{
LoopCount = Convert.ToInt32((testTxReturnLostToleranceStruct.LoopTime - countMol) / testTxReturnLostToleranceStruct.GatingTime) + 1;
}
do
{
RxPower = testTxReturnLostToleranceStruct.StartRxPwr + testTxReturnLostToleranceStruct.RXAttStep * i;
tempAttenRX.AttnValue(RxPower.ToString());
RxPowerArray.Add(RxPower);
Log.SaveLogToTxt("SetAttenRX=" + RxPower.ToString());
tempED.EdGatingStart(); //刷新误码数
for (int j = 0; j < LoopCount; j++)
{
Thread.Sleep(Convert.ToInt32(testTxReturnLostToleranceStruct.GatingTime * 1000));
ber = tempED.QureyEdErrorRatio();
Log.SaveLogToTxt("BerRX=" + ber.ToString());
if (ber != 0)
{
BerArrayRX.Add(ber);
break;
}
else
{
if (j == LoopCount - 1)
{
BerArrayRX.Add(ber);
}
}
}
i++;
}while (ber != 0);
if (ber == 0)
{
NoneBerPoint = RxPower;
//tempAttenRX.AttnValue(NoneBerPoint.ToString());
Log.SaveLogToTxt("NoneBerPoint= " + NoneBerPoint.ToString());
}
//tempED.EdGatingStart(); //刷新误码数
double value = 11.5;
do
{
StartTxPwr = dut.ReadDmiTxp() - value;
if (!this.SetTargetPower(StartTxPwr))
{
return(false);
}
tempED.EdGatingStart(); //刷新误码数
for (int j = 0; j < LoopCount; j++)
{
Thread.Sleep(Convert.ToInt32(testTxReturnLostToleranceStruct.GatingTime * 1000));
ber = tempED.QureyEdErrorRatio();
Log.SaveLogToTxt("BerRX=" + ber.ToString());
if (ber != 0)
{
break;
}
}
if (ber == 0)
{
TxReturnLosTolerance = tempPowerMeter.ReadPower();
Log.SaveLogToTxt("TxReturnLosTolerance= " + TxReturnLosTolerance.ToString());
break;
}
//tempAttenTX.SetAttnValue(40);
value += 0.5;
} while (value < 13);
TxReturnLosTolerance = value;
OutPutandFlushLog();
return(true);
}
else
{
Log.SaveLogToTxt(isAutoAlaign.ToString());
TxReturnLosTolerance = -1000;
OutPutandFlushLog();
return(isAutoAlaign);
}
}
else
{
Log.SaveLogToTxt("Equipments are not enough!");
//AnalysisOutputProcData(procData);
AnalysisOutputParameters(outputParameters);
return(false);
}
}
