public static string generateSectionGraph(string dirSectionData, string pathSectionCss, string filenameSVGMap)
{
//定义页面大小 及 纵向平移
List <ItemWellSection> listWellsSection = cXmlDocSectionGeo.makeListWellSection(pathSectionCss);
//读取page设置全局类
cXEGeopage curPage = new cXEGeopage(pathSectionCss);
iPositionXFirstWell = curPage.iPositionXFirstWell;
//设置井的绘制位置
setXPositionView(pathSectionCss, listWellsSection);
saveXview2Css(pathSectionCss, listWellsSection);
int iPageTopYOff = (int)(curPage.TopElevation * curPage.fVscale);
cSVGDocSection svgSection = new cSVGDocSection(curPage.PageWidth, curPage.PageHeight, 0, 0, curPage.sUnit);
//定义返回的xmlElement变量，作为调用各种加入的道的返回值
XmlElement returnElemment;
#region 增加海拔尺
//初始化页面数据、海拔尺，绘图单位
int ElevationRulerTop = int.Parse(cXmlBase.getNodeInnerText(pathSectionCss, cXETrackRuler.xmlFullPathTopElevationDepth));
int ElevationRulerBase = int.Parse(cXmlBase.getNodeInnerText(pathSectionCss, cXETrackRuler.xmlFullPathBotElevationDepth));
int iScaleElevationRuler = int.Parse(cXmlBase.getNodeInnerText(pathSectionCss, cXETrackRuler.xmlFullPathMainScale)); //海拔尺的maintick
int iFontSize = int.Parse(cXmlBase.getNodeInnerText(pathSectionCss, cXETrackRuler.xmlFullPathiFontSize));
int iVisible = int.Parse(cXmlBase.getNodeInnerText(pathSectionCss, cXETrackRuler.xmlFullPathiVisible));
//调用了简化版的海拔尺,海拔尺与井内容无关和标题一样 可由根文件控制。
//传入的深度与绘制无关，传入的海拔就是正，绘制时海拔向下为正
if (iVisible == 1)
{
returnElemment = cSVGSectionTrackWellRuler.gElevationRulerSimple(svgSection.svgDoc, ElevationRulerTop, ElevationRulerBase, iScaleElevationRuler, curPage.fVscale, iFontSize);
//iDX取了10
//因为有页面的top深对应刻度，所以要做纵向平移。
svgSection.addgElement2BaseLayer(returnElemment, 200, iPageTopYOff);
}
#endregion
XmlDocument XDocSection = new XmlDocument();
XDocSection.Load(pathSectionCss);
#region 断层 绘制断层 并把断层数据存入List 供连层时计算使用
XmlElement gLayerFault = svgSection.gLayerElement("断层");
string faultPath = "/SectionMap/FaultInfor/FaultItem";
List <itemDrawDataFaultItem> listFaultItem = new List <itemDrawDataFaultItem>();
foreach (XmlNode xn in XDocSection.SelectNodes(faultPath))
{
itemDrawDataFaultItem faultItem = new itemDrawDataFaultItem(xn);
string sID = xn.Attributes["id"].Value;
double x1 = transformX(curPage.fHScaleWellDistance, xn.Attributes["x1"].Value);
double y1 = double.Parse(xn.Attributes["y1"].Value) * curPage.fVscale;
double x2 = transformX(curPage.fHScaleWellDistance, xn.Attributes["x2"].Value);
double y2 = double.Parse(xn.Attributes["y2"].Value) * curPage.fVscale;
faultItem.x1View = x1;
faultItem.y1View = y1;
faultItem.x2View = x2;
faultItem.y2View = y2;
faultItem.displacementView = faultItem.displacement * curPage.fHScaleWellDistance;
XmlElement faultLine = svgSection.svgDoc.CreateElement("line");
faultLine.SetAttribute("id", sID);
faultLine.SetAttribute("stroke-width", "2");
faultLine.SetAttribute("onclick", "getID(evt)");
//左侧的绘制
faultLine.SetAttribute("x1", x1.ToString("0.0"));
faultLine.SetAttribute("y1", y1.ToString("0.0"));
faultLine.SetAttribute("x2", x2.ToString("0.0"));
faultLine.SetAttribute("y2", y2.ToString("0.0"));
faultLine.SetAttribute("stroke", "red");
faultLine.SetAttribute("fill", "red");
svgSection.addgElement2Layer(gLayerFault, faultLine, svgSection.offsetX_gSVG, iPageTopYOff);
listFaultItem.Add(faultItem);
}
#endregion
#region 先画连接层 判断是否切割，非切割的直接连接，切割的得重画
string pathTrack = "/SectionMap/ConnectInfor/ConnectItem";
//首先得判断是否多边形与断层线相交
XmlElement gLayerConnectJSJL = svgSection.gLayerElement("测井解释");
XmlElement gLayerConnectLayer = svgSection.gLayerElement("分层");
XmlElement gLayerConnectLitho = svgSection.gLayerElement("岩性");
XmlElement gLayerConnectBase = svgSection.gLayerElement("连接");
svgSection.addgLayer(gLayerConnectLayer, 0, 0);
foreach (XmlNode xn in XDocSection.SelectNodes(pathTrack))
{
if (xn.Attributes["id"] != null)
{
string sID = xn.Attributes["id"].Value;
int iShowMode = int.Parse(xn.Attributes["iShowMode"].Value);
string strTypeTrack = xn.Attributes["trackType"].Value;
string sFill = xn.Attributes["sFill"].Value;
#region 画连接层 模式1
if (iShowMode == 1)
{
XmlNode rect1 = xn.SelectSingleNode("rect1");
string sIDtrack1 = rect1.Attributes["sIDtrack"].Value;
string wellID1 = rect1.Attributes["wellID"].Value;
string sIDitem1 = rect1.Attributes["sIDitem"].Value;
string filePathOperWell1 = dirSectionData + "//" + wellID1 + ".xml";
cDataItemConnect item1 = new cDataItemConnect(pathSectionCss, filePathOperWell1, wellID1, sIDtrack1, sIDitem1);
XmlNode rect2 = xn.SelectSingleNode("rect2");
string sIDtrack2 = rect2.Attributes["sIDtrack"].Value;
string wellID2 = rect2.Attributes["wellID"].Value;
string sIDitem2 = rect2.Attributes["sIDitem"].Value;
string filePathOperWell2 = dirSectionData + "//" + wellID2 + ".xml";
cDataItemConnect item2 = new cDataItemConnect(pathSectionCss, filePathOperWell2, wellID2, sIDtrack2, sIDitem2);
if (wellID1 != "" && sIDtrack1 != "" && wellID2 != "" && sIDtrack2 != "")
{
List <string> ltPathd = makeConnectPath.makePathd(listFaultItem, item1, item2);
foreach (string d in ltPathd)
{
XmlElement connectPath = svgSection.svgDoc.CreateElement("path");
connectPath.SetAttribute("id", sID);
connectPath.SetAttribute("stroke-width", "1");
connectPath.SetAttribute("onclick", "getID(evt)");
connectPath.SetAttribute("stroke", "black");
connectPath.SetAttribute("d", d);
string fillType = "none";
if (strTypeTrack == TypeTrack.测井解释.ToString())
{
fillType = codeReplace.codeReplaceJSJL2FillUrl(sFill);
connectPath.SetAttribute("fill", fillType);
svgSection.addgElement2Layer(gLayerConnectJSJL, connectPath, svgSection.offsetX_gSVG, iPageTopYOff);
}
else if (strTypeTrack == TypeTrack.分层.ToString())
{
fillType = cSVGSectionTrackLayer.getLayerFillColor(sFill);
connectPath.SetAttribute("fill", fillType);
svgSection.addgElement2Layer(gLayerConnectLayer, connectPath, svgSection.offsetX_gSVG, iPageTopYOff);
}
else if (strTypeTrack == TypeTrack.岩性层段.ToString())
{
fillType = cSVGSectionTrackLayer.getLayerFillColor(sFill);
connectPath.SetAttribute("fill", fillType);
svgSection.addgElement2Layer(gLayerConnectLitho, connectPath, svgSection.offsetX_gSVG, iPageTopYOff);
}
else
{
connectPath.SetAttribute("fill", "none");
svgSection.addgElement2Layer(gLayerConnectBase, connectPath, svgSection.offsetX_gSVG, iPageTopYOff);
}
}
}
}
#endregion
#region 尖灭模式
else
{
XmlNode rect1 = xn.SelectSingleNode("rect1");
string sIDtrack1 = rect1.Attributes["sIDtrack"].Value;
string wellID1 = rect1.Attributes["wellID"].Value;
string sIDitem1 = rect1.Attributes["sIDitem"].Value;
if (wellID1 != "" && sIDtrack1 != "")
{
string filePathOperWell1 = dirSectionData + "//" + wellID1 + ".xml";
cDataItemConnect connectItem = new cDataItemConnect(pathSectionCss, filePathOperWell1, wellID1, sIDtrack1, sIDitem1);
double fExtanceLength = 100;
int indexWell = listWellsSection.IndexOf(listWellsSection.SingleOrDefault(p => p.sJH == wellID1));
if (indexWell < listWellsSection.Count - 1)
{
fExtanceLength = (listWellsSection[indexWell + 1].fXview - listWellsSection[indexWell].fXview) * 0.35;
}
string d = "";
if (iShowMode == (int)TypeModeGeoOperate.channelRight) //右河道
{
double x1 = connectItem.x1 + connectItem.width;
double y1 = connectItem.y1;
double x2 = connectItem.x1 + connectItem.width;
double y2 = connectItem.y1 + connectItem.height;
double x3 = x1 + fExtanceLength;
double y3 = y2;
double x4 = x1 + fExtanceLength;
double y4 = y1;
d = "M " + x1.ToString() + " " + y1.ToString() + " L " + x2.ToString() + " " + y2.ToString() +
" Q " + x3.ToString() + " " + y3.ToString() + " " + x4.ToString() + " " + y4.ToString() + " z ";
}
if (iShowMode == (int)TypeModeGeoOperate.channelLeft) //左河道
{
double x1 = connectItem.x1;
double y1 = connectItem.y1;
double x2 = connectItem.x1;
double y2 = connectItem.y1 + connectItem.height;
double x3 = x1 - fExtanceLength;
double y3 = y2;
double x4 = x1 - fExtanceLength;
double y4 = y1;
d = "M " + x1.ToString() + " " + y1.ToString() + " L " + x2.ToString() + " " + y2.ToString() +
" Q " + x3.ToString() + " " + y3.ToString() + " " + x4.ToString() + " " + y4.ToString() + " z ";
}
if (iShowMode == (int)TypeModeGeoOperate.barRight) //右坝
{
double x1 = connectItem.x1 + connectItem.width;
double y1 = connectItem.y1;
double x2 = connectItem.x1 + connectItem.width;
double y2 = connectItem.y1 + connectItem.height;
double x3 = x1 + fExtanceLength;
double y3 = y1;
double x4 = x1 + fExtanceLength;
double y4 = y2;
d = "M " + x2.ToString() + " " + y2.ToString() + " L " + x1.ToString() + " " + y1.ToString() +
" Q " + x3.ToString() + " " + y3.ToString() + " " + x4.ToString() + " " + y4.ToString() + " z ";
}
if (iShowMode == (int)TypeModeGeoOperate.barLeft) //左坝
{
double x1 = connectItem.x1;
double y1 = connectItem.y1;
double x2 = connectItem.x1;
double y2 = connectItem.y1 + connectItem.height;
double x3 = x1 - fExtanceLength;
double y3 = y1;
double x4 = x1 - fExtanceLength;
double y4 = y2;
d = "M " + x2.ToString() + " " + y2.ToString() + " L " + x1.ToString() + " " + y1.ToString() +
" Q " + x3.ToString() + " " + y3.ToString() + " " + x4.ToString() + " " + y4.ToString() + " z ";
}
if (iShowMode == (int)TypeModeGeoOperate.pinchOutRight) //右尖灭
{
double x1 = connectItem.x1 + connectItem.width;
double y1 = connectItem.y1;
double x2 = connectItem.x1 + connectItem.width;
double y2 = connectItem.y1 + connectItem.height;
d = "M " + x1.ToString() + " " + y1.ToString() + "h " + fExtanceLength.ToString() + "l -" + (0.2 * fExtanceLength).ToString() + " " + (connectItem.height / 2).ToString() + " " + "l " + (0.1 * fExtanceLength).ToString() + " " + (connectItem.height / 2).ToString() + " "
+ " L " + x2.ToString() + " " + y2.ToString() + " z ";
}
if (iShowMode == (int)TypeModeGeoOperate.pinchOutLeft) //左尖灭
{
double x1 = connectItem.x1;
double y1 = connectItem.y1;
double x2 = connectItem.x1;
double y2 = connectItem.y1 + connectItem.height;
d = "M " + x1.ToString() + " " + y1.ToString() + "h-" + fExtanceLength.ToString() + "l " + (0.2 * fExtanceLength).ToString() + " " + (connectItem.height / 2).ToString() + " " + "l -" + (0.1 * fExtanceLength).ToString() + " " + (connectItem.height / 2).ToString() + " "
+ " L " + x2.ToString() + " " + y2.ToString() + " z ";
}
XmlElement connectPath = svgSection.svgDoc.CreateElement("path");
connectPath.SetAttribute("id", sID);
connectPath.SetAttribute("stroke-width", "1");
connectPath.SetAttribute("onclick", "getID(evt)");
connectPath.SetAttribute("stroke", "black");
connectPath.SetAttribute("d", d);
string fillType = "none";
if (strTypeTrack == TypeTrack.测井解释.ToString())
{
fillType = codeReplace.codeReplaceJSJL2FillUrl(sFill);
connectPath.SetAttribute("fill", fillType);
svgSection.addgElement2Layer(gLayerConnectJSJL, connectPath, svgSection.offsetX_gSVG, iPageTopYOff);
}
else if (strTypeTrack == TypeTrack.分层.ToString())
{
fillType = cSVGSectionTrackLayer.getLayerFillColor(sFill);
connectPath.SetAttribute("fill", fillType);
svgSection.addgElement2Layer(gLayerConnectLayer, connectPath, svgSection.offsetX_gSVG, iPageTopYOff);
}
} //end if wellID 不能为空
}
#endregion
}
}
#endregion
#region //在listWellSection中循环，一口一口井的加入剖面
for (int i = 0; i < listWellsSection.Count; i++)
{
string sJH = listWellsSection[i].sJH;
string filePathTemplatOper = Path.Combine(dirSectionData, sJH + ".xml");
//斜井模式
cSVGSectionWell currentWell = makePathWell(svgSection, pathSectionCss, filePathTemplatOper,
listWellsSection[i].fShowedDepthTop, listWellsSection[i].fShowedDepthBase, curPage.fVscale, curPage);
//建立新层
XmlElement gWellLayer = svgSection.gLayerElement(sJH);
svgSection.addgLayer(gWellLayer, 0, 0);
svgSection.addgElement2Layer(gWellLayer, currentWell.gWell, listWellsSection[i].fXview, iPageTopYOff + listWellsSection[i].fYview * curPage.fVscale);
//增加井距线
if (i < listWellsSection.Count - 1)
{
double distance = c2DGeometryAlgorithm.calDistance2D(listWellsSection[i].dbX, listWellsSection[i].dbY, listWellsSection[i + 1].dbX, listWellsSection[i + 1].dbY);
returnElemment = cSVGSectionTrackConnect.gLineWellDistance(svgSection.svgDoc, listWellsSection[i].fXview, 10, listWellsSection[i + 1].fXview - listWellsSection[i].fXview, distance);
svgSection.addgElement2BaseLayer(returnElemment, svgSection.offsetX_gSVG, svgSection.offsetY_gSVG);
}
}
#endregion
svgSection.addgLayer(gLayerConnectBase, 0, 0);
svgSection.addgLayer(gLayerConnectLitho, 0, 0);
svgSection.addgLayer(gLayerConnectJSJL, 0, 0);
svgSection.addgLayer(gLayerFault, 0, 0);
string fileSVG = Path.Combine(cProjectManager.dirPathTemp, filenameSVGMap);
svgSection.makeSVGfile(fileSVG);
return(fileSVG);
}
public static string generateFence(string dirSectionData, string pathSectionCss, string filenameSVGMap)
{
//定义页面大小 及 纵向平移
List <ItemWellSection> listWellsSection = cXmlDocSectionGeo.makeListWellSection(pathSectionCss);
//读取page设置全局类
cXEGeopage curPage = new cXEGeopage(pathSectionCss);
int iPageTopYOff = 0;
cSVGDocSection svgSection = new cSVGDocSection(curPage.PageWidth, curPage.PageHeight, 0, 0, curPage.sUnit);
//定义返回的xmlElement变量，作为调用各种加入的道的返回值
XmlElement returnElemment;
XmlDocument XDocSection = new XmlDocument();
XDocSection.Load(pathSectionCss);
#region 断层 绘制断层 并把断层数据存入List 供连层时计算使用
XmlElement gLayerFault = svgSection.gLayerElement("断层");
string faultPath = "/SectionMap/FaultInfor/FaultItem";
List <itemDrawDataFaultItem> listFaultItem = new List <itemDrawDataFaultItem>();
foreach (XmlNode xn in XDocSection.SelectNodes(faultPath))
{
itemDrawDataFaultItem faultItem = new itemDrawDataFaultItem(xn);
string sID = xn.Attributes["id"].Value;
double x1 = transformX(curPage.fHScaleWellDistance, xn.Attributes["x1"].Value);
double y1 = double.Parse(xn.Attributes["y1"].Value) * curPage.fVscale;
double x2 = transformX(curPage.fHScaleWellDistance, xn.Attributes["x2"].Value);
double y2 = double.Parse(xn.Attributes["y2"].Value) * curPage.fVscale;
faultItem.x1View = x1;
faultItem.y1View = y1;
faultItem.x2View = x2;
faultItem.y2View = y2;
faultItem.displacementView = faultItem.displacement * curPage.fHScaleWellDistance;
XmlElement faultLine = svgSection.svgDoc.CreateElement("line");
faultLine.SetAttribute("id", sID);
faultLine.SetAttribute("stroke-width", "2");
faultLine.SetAttribute("onclick", "getID(evt)");
//左侧的绘制
faultLine.SetAttribute("x1", x1.ToString("0.0"));
faultLine.SetAttribute("y1", y1.ToString("0.0"));
faultLine.SetAttribute("x2", x2.ToString("0.0"));
faultLine.SetAttribute("y2", y2.ToString("0.0"));
faultLine.SetAttribute("stroke", "red");
faultLine.SetAttribute("fill", "red");
svgSection.addgElement2Layer(gLayerFault, faultLine, svgSection.offsetX_gSVG, iPageTopYOff);
listFaultItem.Add(faultItem);
}
#endregion
#region 先画连接层 判断是否切割，非切割的直接连接，切割的得重画
string pathTrack = "/SectionMap/ConnectInfor/ConnectItem";
//首先得判断是否多边形与断层线相交
XmlElement gLayerConnectJSJL = svgSection.gLayerElement("测井解释");
XmlElement gLayerConnectLayer = svgSection.gLayerElement("分层");
XmlElement gLayerConnectLitho = svgSection.gLayerElement("岩性");
XmlElement gLayerConnectBase = svgSection.gLayerElement("连接");
svgSection.addgLayer(gLayerConnectLayer, 0, 0);
foreach (XmlNode xn in XDocSection.SelectNodes(pathTrack))
{
if (xn.Attributes["id"] != null)
{
string sID = xn.Attributes["id"].Value;
int iShowMode = int.Parse(xn.Attributes["iShowMode"].Value);
string strTypeTrack = xn.Attributes["trackType"].Value;
string sFill = xn.Attributes["sFill"].Value;
#region 画连接层 模式1
if (iShowMode == 1)
{
XmlNode rect1 = xn.SelectSingleNode("rect1");
string sIDtrack1 = rect1.Attributes["sIDtrack"].Value;
string wellID1 = rect1.Attributes["wellID"].Value;
string sIDitem1 = rect1.Attributes["sIDitem"].Value;
string filePathOperWell1 = dirSectionData + "//" + wellID1 + ".xml";
cDataItemConnect item1 = new cDataItemConnect(pathSectionCss, filePathOperWell1, wellID1, sIDtrack1, sIDitem1);
XmlNode rect2 = xn.SelectSingleNode("rect2");
string sIDtrack2 = rect2.Attributes["sIDtrack"].Value;
string wellID2 = rect2.Attributes["wellID"].Value;
string sIDitem2 = rect2.Attributes["sIDitem"].Value;
string filePathOperWell2 = dirSectionData + "//" + wellID2 + ".xml";
cDataItemConnect item2 = new cDataItemConnect(pathSectionCss, filePathOperWell2, wellID2, sIDtrack2, sIDitem2);
if (wellID1 != "" && sIDtrack1 != "" && wellID2 != "" && sIDtrack2 != "")
{
List <string> ltPathd = makeConnectPath.makePathd(listFaultItem, item1, item2);
foreach (string d in ltPathd)
{
XmlElement connectPath = svgSection.svgDoc.CreateElement("path");
connectPath.SetAttribute("id", sID);
connectPath.SetAttribute("stroke-width", "1");
connectPath.SetAttribute("onclick", "getID(evt)");
connectPath.SetAttribute("stroke", "black");
connectPath.SetAttribute("d", d);
string fillType = "none";
if (strTypeTrack == TypeTrack.测井解释.ToString())
{
fillType = codeReplace.codeReplaceJSJL2FillUrl(sFill);
connectPath.SetAttribute("fill", fillType);
svgSection.addgElement2Layer(gLayerConnectJSJL, connectPath, svgSection.offsetX_gSVG, iPageTopYOff);
}
else if (strTypeTrack == TypeTrack.分层.ToString())
{
fillType = cSVGSectionTrackLayer.getLayerFillColor(sFill);
connectPath.SetAttribute("fill", fillType);
svgSection.addgElement2Layer(gLayerConnectLayer, connectPath, svgSection.offsetX_gSVG, iPageTopYOff);
}
else if (strTypeTrack == TypeTrack.岩性层段.ToString())
{
fillType = cSVGSectionTrackLayer.getLayerFillColor(sFill);
connectPath.SetAttribute("fill", fillType);
svgSection.addgElement2Layer(gLayerConnectLitho, connectPath, svgSection.offsetX_gSVG, iPageTopYOff);
}
else
{
connectPath.SetAttribute("fill", "none");
svgSection.addgElement2Layer(gLayerConnectBase, connectPath, svgSection.offsetX_gSVG, iPageTopYOff);
}
}
}
}
#endregion
#region 尖灭模式
else
{
XmlNode rect1 = xn.SelectSingleNode("rect1");
string sIDtrack1 = rect1.Attributes["sIDtrack"].Value;
string wellID1 = rect1.Attributes["wellID"].Value;
string sIDitem1 = rect1.Attributes["sIDitem"].Value;
if (wellID1 != "" && sIDtrack1 != "")
{
string filePathOperWell1 = dirSectionData + "//" + wellID1 + ".xml";
cDataItemConnect connectItem = new cDataItemConnect(pathSectionCss, filePathOperWell1, wellID1, sIDtrack1, sIDitem1);
double fExtanceLength = 100;
int indexWell = listWellsSection.IndexOf(listWellsSection.SingleOrDefault(p => p.sJH == wellID1));
if (indexWell < listWellsSection.Count - 1)
{
fExtanceLength = (listWellsSection[indexWell + 1].fXview - listWellsSection[indexWell].fXview) * 0.35;
}
string d = "";
if (iShowMode == (int)TypeModeGeoOperate.channelRight) //右河道
{
double x1 = connectItem.x1 + connectItem.width;
double y1 = connectItem.y1;
double x2 = connectItem.x1 + connectItem.width;
double y2 = connectItem.y1 + connectItem.height;
double x3 = x1 + fExtanceLength;
double y3 = y2;
double x4 = x1 + fExtanceLength;
double y4 = y1;
d = "M " + x1.ToString() + " " + y1.ToString() + " L " + x2.ToString() + " " + y2.ToString() +
" Q " + x3.ToString() + " " + y3.ToString() + " " + x4.ToString() + " " + y4.ToString() + " z ";
}
if (iShowMode == (int)TypeModeGeoOperate.channelLeft) //左河道
{
double x1 = connectItem.x1;
double y1 = connectItem.y1;
double x2 = connectItem.x1;
double y2 = connectItem.y1 + connectItem.height;
double x3 = x1 - fExtanceLength;
double y3 = y2;
double x4 = x1 - fExtanceLength;
double y4 = y1;
d = "M " + x1.ToString() + " " + y1.ToString() + " L " + x2.ToString() + " " + y2.ToString() +
" Q " + x3.ToString() + " " + y3.ToString() + " " + x4.ToString() + " " + y4.ToString() + " z ";
}
if (iShowMode == (int)TypeModeGeoOperate.barRight) //右坝
{
double x1 = connectItem.x1 + connectItem.width;
double y1 = connectItem.y1;
double x2 = connectItem.x1 + connectItem.width;
double y2 = connectItem.y1 + connectItem.height;
double x3 = x1 + fExtanceLength;
double y3 = y1;
double x4 = x1 + fExtanceLength;
double y4 = y2;
d = "M " + x2.ToString() + " " + y2.ToString() + " L " + x1.ToString() + " " + y1.ToString() +
" Q " + x3.ToString() + " " + y3.ToString() + " " + x4.ToString() + " " + y4.ToString() + " z ";
}
if (iShowMode == (int)TypeModeGeoOperate.barLeft) //左坝
{
double x1 = connectItem.x1;
double y1 = connectItem.y1;
double x2 = connectItem.x1;
double y2 = connectItem.y1 + connectItem.height;
double x3 = x1 - fExtanceLength;
double y3 = y1;
double x4 = x1 - fExtanceLength;
double y4 = y2;
d = "M " + x2.ToString() + " " + y2.ToString() + " L " + x1.ToString() + " " + y1.ToString() +
" Q " + x3.ToString() + " " + y3.ToString() + " " + x4.ToString() + " " + y4.ToString() + " z ";
}
if (iShowMode == (int)TypeModeGeoOperate.pinchOutRight) //右尖灭
{
double x1 = connectItem.x1 + connectItem.width;
double y1 = connectItem.y1;
double x2 = connectItem.x1 + connectItem.width;
double y2 = connectItem.y1 + connectItem.height;
d = "M " + x1.ToString() + " " + y1.ToString() + "h " + fExtanceLength.ToString() + "l -" + (0.2 * fExtanceLength).ToString() + " " + (connectItem.height / 2).ToString() + " " + "l " + (0.1 * fExtanceLength).ToString() + " " + (connectItem.height / 2).ToString() + " "
+ " L " + x2.ToString() + " " + y2.ToString() + " z ";
}
if (iShowMode == (int)TypeModeGeoOperate.pinchOutLeft) //左尖灭
{
double x1 = connectItem.x1;
double y1 = connectItem.y1;
double x2 = connectItem.x1;
double y2 = connectItem.y1 + connectItem.height;
d = "M " + x1.ToString() + " " + y1.ToString() + "h-" + fExtanceLength.ToString() + "l " + (0.2 * fExtanceLength).ToString() + " " + (connectItem.height / 2).ToString() + " " + "l -" + (0.1 * fExtanceLength).ToString() + " " + (connectItem.height / 2).ToString() + " "
+ " L " + x2.ToString() + " " + y2.ToString() + " z ";
}
XmlElement connectPath = svgSection.svgDoc.CreateElement("path");
connectPath.SetAttribute("id", sID);
connectPath.SetAttribute("stroke-width", "1");
connectPath.SetAttribute("onclick", "getID(evt)");
connectPath.SetAttribute("stroke", "black");
connectPath.SetAttribute("d", d);
string fillType = "none";
if (strTypeTrack == TypeTrack.测井解释.ToString())
{
fillType = codeReplace.codeReplaceJSJL2FillUrl(sFill);
connectPath.SetAttribute("fill", fillType);
svgSection.addgElement2Layer(gLayerConnectJSJL, connectPath, svgSection.offsetX_gSVG, iPageTopYOff);
}
else if (strTypeTrack == TypeTrack.分层.ToString())
{
fillType = cSVGSectionTrackLayer.getLayerFillColor(sFill);
connectPath.SetAttribute("fill", fillType);
svgSection.addgElement2Layer(gLayerConnectLayer, connectPath, svgSection.offsetX_gSVG, iPageTopYOff);
}
} //end if wellID 不能为空
}
#endregion
}
}
#endregion
//在listWellSection中循环，一口一口井的加入剖面
for (int i = 0; i < listWellsSection.Count; i++)
{
string sJH = listWellsSection[i].sJH;
string filePathTemplatOper = Path.Combine(dirSectionData, sJH + ".xml");
//斜井模式
cSVGSectionWell currentWell = makePathWell(svgSection, pathSectionCss, filePathTemplatOper,
listWellsSection[i].fShowedDepthTop, listWellsSection[i].fShowedDepthBase, curPage.fVscale, curPage);
//按显示的顶深拉高
svgSection.addgElement2BaseLayer(currentWell.gWell, curPage.fMapScale * listWellsSection[i].fXview, curPage.fMapScale * listWellsSection[i].fYview - listWellsSection[i].fShowedDepthTop * curPage.fVscale);
//加个井位标识
returnElemment = cSVGSectionWell.gWellHead(svgSection.svgDoc, sJH, curPage.fMapScale * listWellsSection[i].fXview, curPage.fMapScale * listWellsSection[i].fYview, 18);
svgSection.addgElement2BaseLayer(returnElemment, 0, 0);
}
svgSection.addgLayer(gLayerConnectBase, 0, 0);
svgSection.addgLayer(gLayerConnectLitho, 0, 0);
svgSection.addgLayer(gLayerConnectJSJL, 0, 0);
svgSection.addgLayer(gLayerFault, 0, 0);
string fileSVG = Path.Combine(cProjectManager.dirPathTemp, filenameSVGMap);
svgSection.makeSVGfile(fileSVG);
return(fileSVG);
}
void generateSectionGraph(string filenameSVGMap, bool bView)
{
//xml存数据不合适 因为会有大量的井数据，但是可以存个样式，样式搭配数据，样式里可以有道宽，这样做到数据和样式的分离，成图解析器解析样式就OK。
//定义每口井绘制的位置坐标，剖面图y=0，井组分析x，y是井点坐标变换值
//定义 iChoise==1 等间隔排列，iChoise==2 相邻井真实距离缩放
int iChoise = 2;
if (rdbPlaceByEqual.Checked == true)
{
iChoise = 1;
}
List <Point> PListWellPositon = new List <Point>();
//根据默认值定义section的页面大小及标题,根据海拔确定纵向的平移高度
int iDY = (int)listWellsSection.Select(p => p.fKB).ToList().Max() + 100;
cSVGDocSection svgSection = new cSVGDocSection(PageWidth, PageHeight, 0, iDY, sUnit);
string sTitle = string.Join("-", listWellsSection.Select(p => p.sJH).ToList()) + "开发剖面图";
svgSection.addMapTitle(sTitle, 100, 100);
XmlElement returnElemment;
//画井距尺
for (int i = 0; i < this.listWellsSection.Count - 1; i++)
{
if (rdbPlaceBYWellDistance.Checked == true)
{
//距离是2口相邻井的距离
int iDistance = Convert.ToInt16(c2DGeometryAlgorithm.calDistance2D(listWellsSection[i].dbX, listWellsSection[i].dbY, listWellsSection[i + 1].dbX, listWellsSection[i + 1].dbY));
returnElemment = svgSection.gWellDistanceRuler(iDistance, PListWellPositon[i + 1].X - PListWellPositon[i].X);
svgSection.addgElement2BaseLayer(returnElemment, PListWellPositon[i].X, (int)listWellsSection[0].fYview);//拉到同一水平线
//画井距尺
}
}
ElevationRulerBase = -PageHeight / 100 * 100;
//海拔深度时 增加海拔尺，拉平不要海拔尺
int iScaleElevationRuler = 50;
returnElemment = cSVGSectionTrackWellRuler.gElevationRuler(svgSection.svgDoc, ElevationRulerTop, ElevationRulerBase, iScaleElevationRuler);
svgSection.addgElement2BaseLayer(returnElemment, 10);
//根据井序列循环添加井剖面
for (int i = 0; i < listWellsSection.Count; i++)
{
string sJH = listWellsSection[i].sJH;
List <ItemDicWellPath> currentWellPathList = cProjectData.ltProjectWell.Find(p => p.sJH == sJH).WellPathList;
float fTopShowed = listWellsSection[i].fShowedDepthTop;
float fBaseShowed = listWellsSection[i].fShowedDepthBase;
float fDepthFlatted = listWellsSection[i].fYview;
cSVGSectionWell currentWell = new cSVGSectionWell(svgSection.svgDoc, sJH);
//增加地层道
trackDataListLayerDepth getTrackDataListLayerDepth = cIOWellSection.getTrackDataListLayerDepth(sJH, dirSectionData, fTopShowed, fBaseShowed);
int iTrackWidth = 15;
cSVGSectionTrackLayer layerTrack = new cSVGSectionTrackLayer(iTrackWidth);
layerTrack.iTextSize = 6;
if (rdbDepthModelTVD.Checked == true && currentWellPathList.Count > 2)
{
returnElemment = layerTrack.gXieTrack2VerticalLayerDepth(sJH, getTrackDataListLayerDepth, fDepthFlatted);
}
else
{
returnElemment = layerTrack.gTrackLayerDepth(sJH, getTrackDataListLayerDepth, fDepthFlatted);
}
currentWell.addTrack(returnElemment, iTrackWidth);
//增加联井的view
//增加测井解释
trackDataListJSJL trackDataListJSJL = cIOWellSection.getTrackDataListJSJL(sJH, dirSectionData, fTopShowed, fBaseShowed);
iTrackWidth = 15;
cSVGSectionTrackJSJL JSJLTrack = new cSVGSectionTrackJSJL(iTrackWidth);
if (rdbDepthModelTVD.Checked == true && currentWellPathList.Count > 2)
{
returnElemment = JSJLTrack.gXieTrack2VerticalJSJL(sJH, trackDataListJSJL, fDepthFlatted);
}
else
{
returnElemment = JSJLTrack.gTrackJSJL(sJH, trackDataListJSJL, fDepthFlatted);
}
currentWell.addTrack(returnElemment, -iTrackWidth);
//增加射孔道
trackInputPerforationDataList getTrackDataListPerforation = cIOWellSection.getTrackDataListPerforation(sJH, dirSectionData, fTopShowed, fBaseShowed);
iTrackWidth = 15;
cSVGSectionTrackPeforation perforationTrack = new cSVGSectionTrackPeforation(iTrackWidth);
if (rdbDepthModelTVD.Checked == true && currentWellPathList.Count > 2)
{
returnElemment = perforationTrack.gXieTrack2VerticalPerforation(sJH, getTrackDataListPerforation, fDepthFlatted);
}
else
{
returnElemment = perforationTrack.gTrackPerforation(sJH, getTrackDataListPerforation, fDepthFlatted);
}
currentWell.addTrack(returnElemment, -2 * iTrackWidth);
//增加吸水剖面
trackDataListProfile trackDataListProfile = cIOWellSection.getTrackDataListProfile(sJH, dirSectionData, fTopShowed, fBaseShowed);
iTrackWidth = 15;
cSVGSectionTrackProfile profileTrack = new cSVGSectionTrackProfile(iTrackWidth);
returnElemment = profileTrack.gTrackProfile(sJH, trackDataListProfile, fDepthFlatted);
if (currentWellPathList.Count > 2)
{
returnElemment = profileTrack.gXieTrack2VerticalProfile(sJH, trackDataListProfile, fDepthFlatted);
}
else
{
returnElemment = profileTrack.gTrackProfile(sJH, trackDataListProfile, fDepthFlatted);
}
currentWell.addTrack(returnElemment, 15);
//增加左边曲线
string fileLeftLogScrPath = Path.Combine(dirSectionData, sJH + "\\left");
foreach (string fileLog in Directory.GetFileSystemEntries(fileLeftLogScrPath))
{
//trackDataListLog trackDataListLeftLog = trackDataListLog.setupDataListTrackLog(fileLog, fTopShowed, fBaseShowed);
iTrackWidth = 15;
//cSVGSectionTrackLog logTrack = new cSVGSectionTrackLog(iTrackWidth);
//if (rdbDepthModelTVD.Checked == true && currentWellPathList.Count > 2)
// returnElemment = logTrack.gXieTrack2VerticalLog(sJH, trackDataListLeftLog, fDepthFlatted);
//else returnElemment = logTrack.gTrackLog(sJH, trackDataListLeftLog, fDepthFlatted);
//currentWell.addTrack(returnElemment, -30);
}
//增加右边曲线
string fileRightLogScrPath = Path.Combine(dirSectionData, sJH + "\\right");
foreach (string fileLog in Directory.GetFileSystemEntries(fileRightLogScrPath))
{
//trackDataListLog trackDataListRightLog = trackDataListLog.setupDataListTrackLog(fileLog, fTopShowed, fBaseShowed);
iTrackWidth = 15;
//cSVGSectionTrackLog logTrack = new cSVGSectionTrackLog(iTrackWidth);
//if (rdbDepthModelTVD.Checked == true && currentWellPathList.Count > 2)
// returnElemment = logTrack.gXieTrack2VerticalLog(sJH, trackDataListRightLog, fDepthFlatted);
//else returnElemment = logTrack.gTrackLog(sJH, trackDataListRightLog, fDepthFlatted);
//currentWell.addTrack(returnElemment, iTrackWidth);
}
svgSection.addgElement2BaseLayer(currentWell.gWell, PListWellPositon[i].X);
}
//同名小层连线的实现 在绘制小层layertrack的时候，把小层的顶底深的绘制点记录，然后此处当做polyline绘制
bool bConnect = this.cbxConnectSameLayerName.Checked;
string fileSVG = Path.Combine(cProjectManager.dirPathMap, filenameSVGMap);
svgSection.makeSVGfile(fileSVG);
if (bView == false)
{
FormMain.filePathWebSVG = fileSVG;
this.Close();
}
}