public static List <WizardTask> CreateTinkerforgeAmbientLight()
{
var tasks = new List <WizardTask>();
WizardTask t1 = new WizardTask()
{
Name = "Hallo",
Instruction = "Die folgenden Schritte richten das Tinkerforge Helligkeits-Sensor Bricklet ein.",
AudioUri = "file://Assets/HoloFlows/Resources/Wizard/Audio/Tinkerforge/AmbientLight/1.wav",
ImageUri = "file://Assets/HoloFlows/Resources/Wizard/Image/Tinkerforge/AmbientLight/1.png"
};
WizardTask t2 = new WizardTask()
{
Name = "Entfernen",
Instruction = "Entferne den Master Brick vom USB Kabel.",
AudioUri = "file://Assets/HoloFlows/Resources/Wizard/Audio/Tinkerforge/AmbientLight/2.wav",
ImageUri = "file://Assets/HoloFlows/Resources/Wizard/Image/Tinkerforge/AmbientLight/2.png"
};
WizardTask t3 = new WizardTask()
{
Name = "Anschließen",
Instruction = "Schließe das Helligkeits-Sensor Bricklet an.",
AudioUri = "file://Assets/HoloFlows/Resources/Wizard/Audio/Tinkerforge/AmbientLight/3.wav",
ImageUri = "file://Assets/HoloFlows/Resources/Wizard/Image/Tinkerforge/AmbientLight/3.png"
};
WizardTask t4 = new WizardTask()
{
Name = "USB anschließen",
Instruction = "Verbinde den Master Brick mit dem USB Kabel.",
AudioUri = "file://Assets/HoloFlows/Resources/Wizard/Audio/Tinkerforge/AmbientLight/4.wav",
ImageUri = "file://Assets/HoloFlows/Resources/Wizard/Image/Tinkerforge/AmbientLight/4.png"
};
WizardTask t5 = new WizardTask()
{
Name = "Erfolgreich",
Instruction = "Die Einrichtung vom Helligkeits-Sensor Bricklet war erfolgreich.",
AudioUri = "file://Assets/HoloFlows/Resources/Wizard/Audio/Tinkerforge/AmbientLight/5.wav",
ImageUri = "file://Assets/HoloFlows/Resources/Wizard/Image/Tinkerforge/AmbientLight/5.png"
};
tasks.Add(t1);
tasks.Add(t2);
tasks.Add(t3);
tasks.Add(t4);
tasks.Add(t5);
return(tasks);
}
public static List <WizardTask> CreateCompleteBulbExample()
{
List <WizardTask> tasks = new List <WizardTask>();
// WfMS Task: Check if Bridge is present (for this example it is not!)
WizardTask Bt1 = new WizardTask()
{
Name = "Welcome",
Instruction = "The following tasks, will setup the hue Bridge.",
AudioUri = "file://Assets/HoloFlows/Resources/Wizard/Audio/Hue/1-hello.wav",
ImageUri = "file://Assets/HoloFlows/Resources/Wizard/Image/Hue/1.jpg"
};
WizardTask Bt2 = new WizardTask()
{
Name = "Connect Cables",
Instruction = "Plugin the Network and Power Cable to the Bridge.",
AudioUri = "file://Assets/HoloFlows/Resources/Wizard/Audio/Hue/2-cable.wav",
ImageUri = "file://Assets/HoloFlows/Resources/Wizard/Image/Hue/2.jpg"
};
WizardTask Bt3 = new WizardTask()
{
Name = "Ensure Lights",
Instruction = "Ensure that the status lights are flashing.",
AudioUri = "file://Assets/HoloFlows/Resources/Wizard/Audio/Hue/3-status.wav",
ImageUri = "file://Assets/HoloFlows/Resources/Wizard/Image/Hue/3.jpg"
};
// WfMS Task: Autodiscovery
// WfMS Task: InitHue Connection
WizardTask Bt4 = new WizardTask()
{
Name = "Press Connect Button",
Instruction = "Press the 'Philips' Button on the Bridge.",
AudioUri = "file://Assets/HoloFlows/Resources/Wizard/Audio/Hue/4-button.wav",
ImageUri = "file://Assets/HoloFlows/Resources/Wizard/Image/Hue/4.jpg"
};
// WfMS Task: autoapprove bridge
//WizardTask Bt4 = new WizardTask()
//{
// Name = "You´re done",
// Instruction = "The Hue Bridge is ready to use."
//};
//WizardTask t1 = new WizardTask()
//{
// Name = "Welcome",
// Instruction = "The following tasks, will setup the hue Bulb."
//};
WizardTask t2 = new WizardTask()
{
Name = "Insert Bulb",
Instruction = "Insert the Hue Bulb to your lamp.",
AudioUri = "file://Assets/HoloFlows/Resources/Wizard/Audio/Hue/5-bulb.wav",
ImageUri = "file://Assets/HoloFlows/Resources/Wizard/Image/Hue/5.jpg"
};
WizardTask t3 = new WizardTask()
{
Name = "Switch on Power",
Instruction = "Ensure power is switched on.",
AudioUri = "file://Assets/HoloFlows/Resources/Wizard/Audio/Hue/6-switched-on.wav",
ImageUri = "file://Assets/HoloFlows/Resources/Wizard/Image/Hue/6.jpg"
};
// WfMS Task: GetBridge id
// WfMS Task: Create Items
tasks.Add(Bt1);
tasks.Add(Bt2);
tasks.Add(Bt3);
tasks.Add(Bt4);
tasks.Add(t2);
tasks.Add(t3);
return(tasks);
}
public static List <WizardTask> CreateTinkerforgeIRExample()
{
List <WizardTask> tasks = new List <WizardTask>();
WizardTask t1 = new WizardTask()
{
Name = "Hallo",
Instruction = "Die folgende Schritte richten das Tinkerforge Infrarot Temperatur Bricklet ein.",
AudioUri = "file://Assets/HoloFlows/Resources/Wizard/Audio/Tinkerforge/IR/1.wav",
ImageUri = "file://Assets/HoloFlows/Resources/Wizard/Image/Tinkerforge/IR/1.png"
};
WizardTask t2 = new WizardTask()
{
Name = "WIFI Module verbinden",
Instruction = "Verbinde das WIFI Modul mit dem Masterbrick. Achte auf die korrekte Ausrichtung des WIFI Moduls.",
AudioUri = "file://Assets/HoloFlows/Resources/Wizard/Audio/Tinkerforge/IR/2.wav",
ImageUri = "file://Assets/HoloFlows/Resources/Wizard/Image/Tinkerforge/IR/2.png"
};
WizardTask t3 = new WizardTask()
{
Name = "An PC anschließen",
Instruction = "Schließe nun den Masterbrick mit Hilfe eines USB Kabels an deinen PC an.",
AudioUri = "file://Assets/HoloFlows/Resources/Wizard/Audio/Tinkerforge/IR/3.wav",
ImageUri = "file://Assets/HoloFlows/Resources/Wizard/Image/Tinkerforge/IR/3.png"
};
WizardTask t4 = new WizardTask()
{
Name = "BrickViewer starten",
Instruction = "Starte das Programm 'BrickViewer', welches auf dem Desktop zu finden ist.",
AudioUri = "file://Assets/HoloFlows/Resources/Wizard/Audio/Tinkerforge/IR/4.wav",
ImageUri = "file://Assets/HoloFlows/Resources/Wizard/Image/Tinkerforge/IR/4.png"
};
WizardTask t5 = new WizardTask()
{
Name = "Verbinden",
Instruction = "Überprüfe die Werte im Reiter 'Setup'. Drücke 'Connect' um dich mit dem Bricklet zu verbinden.",
AudioUri = "file://Assets/HoloFlows/Resources/Wizard/Audio/Tinkerforge/IR/5.wav",
ImageUri = "file://Assets/HoloFlows/Resources/Wizard/Image/Tinkerforge/IR/5.png"
};
WizardTask t6 = new WizardTask()
{
Name = "Parameter eingeben",
Instruction = "Wechsle nun in den Reiter 'Master Brick 2.1' und trage im Abschnitt 'Client Mode', die dargestellten Parameter ein.",
AudioUri = "file://Assets/HoloFlows/Resources/Wizard/Audio/Tinkerforge/IR/6.wav",
ImageUri = "file://Assets/HoloFlows/Resources/Wizard/Image/Tinkerforge/IR/6.png"
};
WizardTask t7 = new WizardTask()
{
Name = "Sichern",
Instruction = "Klicke nun auf 'Save WIFI Configuration', um die Einstellungen zu speichern.",
AudioUri = "file://Assets/HoloFlows/Resources/Wizard/Audio/Tinkerforge/IR/7.wav",
ImageUri = "file://Assets/HoloFlows/Resources/Wizard/Image/Tinkerforge/IR/7.png"
};
WizardTask t8 = new WizardTask()
{
Name = "Trennen",
Instruction = "Wechsel zurück in den Reiter 'Setup' und trenne die Verbindnung über Klick auf 'Disconnect'.",
AudioUri = "file://Assets/HoloFlows/Resources/Wizard/Audio/Tinkerforge/IR/8.wav",
ImageUri = "file://Assets/HoloFlows/Resources/Wizard/Image/Tinkerforge/IR/8.png"
};
WizardTask t9 = new WizardTask()
{
Name = "Temperatur Bricklet anschließen",
Instruction = "Ziehe das USB Kabel von deinem Master Brick ab und verbinde das Temperatur Bricklet mit dem Master.",
AudioUri = "file://Assets/HoloFlows/Resources/Wizard/Audio/Tinkerforge/IR/9.wav",
ImageUri = "file://Assets/HoloFlows/Resources/Wizard/Image/Tinkerforge/IR/9.png"
};
WizardTask t10 = new WizardTask()
{
Name = "Stromversorgung anschließen",
Instruction = "Verbinde den Master wieder mit einem USB Kabel, um die Stromversorgung zu gewährleisten.",
AudioUri = "file://Assets/HoloFlows/Resources/Wizard/Audio/Tinkerforge/IR/10.wav",
ImageUri = "file://Assets/HoloFlows/Resources/Wizard/Image/Tinkerforge/IR/10.png"
};
WizardTask t11 = new WizardTask()
{
Name = "Erfolgreich",
Instruction = "Die Einrichtung vom Infrarot Temperatur Bricklet war erfolgreich.",
AudioUri = "file://Assets/HoloFlows/Resources/Wizard/Audio/Tinkerforge/IR/11.wav",
ImageUri = "file://Assets/HoloFlows/Resources/Wizard/Image/Tinkerforge/IR/11.png"
};
tasks.Add(t1);
tasks.Add(t2);
tasks.Add(t3);
tasks.Add(t4);
tasks.Add(t5);
tasks.Add(t6);
tasks.Add(t7);
tasks.Add(t8);
tasks.Add(t9);
tasks.Add(t10);
tasks.Add(t11);
return(tasks);
}