private string autoCreateASNFromCheckoutInfo(string invNo, Pick pick)
{
try
{
InvoicesDetail invD = (InvoicesDetail)_InventoryFacade.GetInvoicesDetail(invNo);
CARTONINVOICES[] cartos = _warehouseFacade.GetGrossAndWeight(pick.PickNo);
string stno = CreateStNO();
Asn asn = new Asn();
asn.Stno = stno;
asn.StType = "UB";
asn.CDate = FormatHelper.TODateInt(DateTime.Now);
asn.CTime = FormatHelper.TOTimeInt(DateTime.Now);
asn.CUser = GetUserCode();
asn.Status = "Release";
asn.Invno = invNo;
asn.FacCode = pick.FacCode;
if (cartos.Length > 0)
{
asn.Gross_weight = (decimal)cartos[0].GROSS_WEIGHT;
asn.Volume = cartos[0].VOLUME;
}
asn.StorageCode = invD.StorageCode ?? " ";
asn.MaintainUser = GetUserCode();
asn.MaintainTime = FormatHelper.TOTimeInt(DateTime.Now);
asn.MaintainDate = FormatHelper.TODateInt(DateTime.Now);
CartonInvDetailMaterial[] cartonMs = _warehouseFacade.GetCartonInvDetailMaterial(pick.PickNo);
MOModel.ItemFacade _itemfacade = new BenQGuru.eMES.MOModel.ItemFacade(this.DataProvider);
int i = 1;
this.DataProvider.BeginTransaction();
foreach (CartonInvDetailMaterial m in cartonMs)
{
object materobj = _itemfacade.GetMaterial(m.MCODE);
Domain.MOModel.Material mater = materobj as Domain.MOModel.Material;
if (materobj == null)
{
this.DataProvider.RollbackTransaction();
throw new Exception("物料表没有物料：" + m.MCODE);
}
string custMCode = _warehouseFacade.GetCustMCodeForUB(pick.PickNo, m.DQMCODE);
if (mater.MCONTROLTYPE == SAP_CONTROLTYPE.SAP_ITEM_CONTROL_KEYPARTS)
{
ASNDetail asnd = new ASNDetail();
asnd.ActQty = 0;
//asnd.CartonNo = " ";
asnd.DQMCode = m.DQMCODE;
asnd.Qty = (int)m.QTY;
asnd.StLine = i.ToString();
asnd.CustMCode = custMCode;
asnd.MCode = m.MCODE;
asnd.Status = "Release";
asnd.StNo = stno;
asnd.MDesc = mater.MchshortDesc;
asnd.Unit = m.UNIT;
asnd.CDate = FormatHelper.TODateInt(DateTime.Now);
asnd.CTime = FormatHelper.TOTimeInt(DateTime.Now);
asnd.CUser = GetUserCode();
asnd.MaintainDate = FormatHelper.TODateInt(DateTime.Now);
asnd.MaintainTime = FormatHelper.TOTimeInt(DateTime.Now);
asnd.MaintainUser = GetUserCode();
asnd.LotNo = " ";
CARTONINVDETAILSN[] sns = _warehouseFacade.GetCartonInvDetailSn(m.CARTONNO, pick.PickNo);
List <string> snList = new List <string>();
if (sns.Length > 0)
{
foreach (CARTONINVDETAILSN sn in sns)
{
snList.Add(sn.SN);
}
Asndetail detail = _warehouseFacade.GetFirstCheckInAsnDetail(snList);
if (detail != null)
{
asnd.ProductionDate = detail.Production_Date;
asnd.SupplierLotNo = detail.Supplier_lotno;
asnd.LotNo = detail.Lotno;
asnd.StorageAgeDate = detail.StorageageDate;
}
}
DBDateTime dbTime = FormatHelper.GetNowDBDateTime(this.DataProvider);
Asndetailitem detailitem = _warehouseFacade.CreateNewAsndetailitem();
detailitem.CDate = dbTime.DBDate;
detailitem.CTime = dbTime.DBTime;
detailitem.CUser = this.GetUserCode();
detailitem.MaintainDate = dbTime.DBDate;
detailitem.MaintainTime = dbTime.DBTime;
detailitem.MaintainUser = this.GetUserCode();
detailitem.Stline = i.ToString();
detailitem.Stno = asn.Stno;
detailitem.MCode = asnd.MCode;
detailitem.DqmCode = asnd.DQMCode;
//查找对应的SAP单
object[] qtyobjs = _warehouseFacade.GetSAPNOandLinebyMCODE(asn.Invno, asnd.MCode, asnd.DQMCode);
if (qtyobjs == null)
{
this.DataProvider.RollbackTransaction();
throw new Exception("入库需求" + asn.Invno + " 没有相关物料" + asnd.MCode + "," + asnd.DQMCode + "或者此行已被取消！");
}
decimal sub = asnd.Qty;
for (int k = 0; k < qtyobjs.Length; k++)
{
InvoicesDetail invdetail = qtyobjs[k] as InvoicesDetail;
decimal subNeed = 0;
object findNeedQTY_old = _warehouseFacade.GetNeedImportQtyOLD(invdetail.InvNo, invdetail.InvLine, asnd.StNo); //找这个invoice行已经导入了多少，和判退多少
Asndetailitem subItemOld = findNeedQTY_old as Asndetailitem;
object findNeedQTY_now = _warehouseFacade.GetNeedImportQtyNow(invdetail.InvNo, invdetail.InvLine, asnd.StNo); //找这个invoice行已经导入了多少，和判退多少
Asndetailitem subItemNow = findNeedQTY_now as Asndetailitem;
subNeed = invdetail.PlanQty - subItemOld.Qty + (subItemOld.Qty - subItemOld.ReceiveQty) + (subItemOld.ReceiveQty - subItemOld.QcpassQty);
subNeed = subNeed - subItemNow.Qty;
if (subNeed == 0)
{
continue;
}
//如果箱数量大于需求数量差---进行拆分
if (sub > subNeed)
{
sub = sub - subNeed; // sub是剩余的
detailitem.Qty = subNeed;
detailitem.Invline = invdetail.InvLine.ToString();
detailitem.Invno = invdetail.InvNo;
detailitem.ActQty = detailitem.Qty;
detailitem.QcpassQty = detailitem.Qty;
detailitem.ReceiveQty = detailitem.Qty;
_warehouseFacade.AddAsndetailitem(detailitem);
}
//如果箱单数量小于等于需求数量差--直接填入
else
{
detailitem.Qty = sub;
detailitem.Invline = invdetail.InvLine.ToString();
detailitem.Invno = invdetail.InvNo;
detailitem.ActQty = detailitem.Qty;
detailitem.QcpassQty = detailitem.Qty;
detailitem.ReceiveQty = detailitem.Qty;
_warehouseFacade.AddAsndetailitem(detailitem);
sub = 0;
}
if (sub == 0)
{
break;
}
}
//如果sub>0，说明导入数量过多，报错
if (sub > 0)
{
this.DataProvider.RollbackTransaction();
throw new Exception("箱单导入数量与需求数量不符!");
}
foreach (CARTONINVDETAILSN sn in sns)
{
Asndetailsn asnSN = new Asndetailsn();
asnSN.CDate = FormatHelper.TODateInt(DateTime.Now);
asnSN.CTime = FormatHelper.TOTimeInt(DateTime.Now);
asnSN.CUser = GetUserCode();
asnSN.MaintainDate = FormatHelper.TODateInt(DateTime.Now);
asnSN.MaintainTime = FormatHelper.TOTimeInt(DateTime.Now);
asnSN.MaintainUser = GetUserCode();
asnSN.Sn = sn.SN;
asnSN.Stline = i.ToString();
asnSN.Stno = stno;
_warehouseFacade.AddAsndetailsn(asnSN);
}
_InventoryFacade.AddASNDetail(asnd);
}
else if (mater.MCONTROLTYPE == SAP_CONTROLTYPE.SAP_ITEM_CONTROL_LOT || mater.MCONTROLTYPE == SAP_CONTROLTYPE.SAP_ITEM_CONTROL_NOCONTROL)
{
ASNDetail asnd = new ASNDetail();
asnd.ActQty = 0;
asnd.CustMCode = custMCode;
asnd.DQMCode = m.DQMCODE;
asnd.Qty = (int)m.QTY;
asnd.StLine = i.ToString();
asnd.MCode = m.MCODE;
asnd.StNo = stno;
asnd.Status = "Release";
asnd.MDesc = mater.MchshortDesc;
asnd.Unit = m.UNIT;
asnd.CDate = FormatHelper.TODateInt(DateTime.Now);
asnd.CTime = FormatHelper.TOTimeInt(DateTime.Now);
asnd.CUser = GetUserCode();
asnd.MaintainDate = FormatHelper.TODateInt(DateTime.Now);
asnd.MaintainTime = FormatHelper.TOTimeInt(DateTime.Now);
asnd.MaintainUser = GetUserCode();
asnd.LotNo = " ";
Pickdetailmaterial pickMaterial = (Pickdetailmaterial)_warehouseFacade.GetLotNOInformationFromDQMCODE(m.DQMCODE, pick.PickNo);
if (pickMaterial != null)
{
asnd.ProductionDate = pickMaterial.Production_Date;
asnd.SupplierLotNo = pickMaterial.Supplier_lotno;
asnd.LotNo = pickMaterial.Lotno;
asnd.StorageAgeDate = pickMaterial.StorageageDate;
}
else
{
throw new Exception(pick.PickNo + "没有找到检料信息！");
}
_InventoryFacade.AddASNDetail(asnd);
DBDateTime dbTime = FormatHelper.GetNowDBDateTime(this.DataProvider);
Asndetailitem detailitem = _warehouseFacade.CreateNewAsndetailitem();
detailitem.CDate = dbTime.DBDate;
detailitem.CTime = dbTime.DBTime;
detailitem.CUser = this.GetUserCode();
detailitem.MaintainDate = dbTime.DBDate;
detailitem.MaintainTime = dbTime.DBTime;
detailitem.MaintainUser = this.GetUserCode();
detailitem.Stline = i.ToString();
detailitem.Stno = asn.Stno;
detailitem.MCode = asnd.MCode;
detailitem.DqmCode = asnd.DQMCode;
//查找对应的SAP单
object[] qtyobjs = _warehouseFacade.GetSAPNOandLinebyMCODE(asn.Invno, asnd.MCode, asnd.DQMCode);
if (qtyobjs == null)
{
this.DataProvider.RollbackTransaction();
throw new Exception("箱单导入数量与需求数量不符!");
}
decimal sub = asnd.Qty;
for (int k = 0; k < qtyobjs.Length; k++)
{
InvoicesDetail invdetail = qtyobjs[k] as InvoicesDetail;
decimal subNeed = 0;
object findNeedQTY_old = _warehouseFacade.GetNeedImportQtyOLD(invdetail.InvNo, invdetail.InvLine, asnd.StNo); //找这个invoice行已经导入了多少，和判退多少
Asndetailitem subItemOld = findNeedQTY_old as Asndetailitem;
object findNeedQTY_now = _warehouseFacade.GetNeedImportQtyNow(invdetail.InvNo, invdetail.InvLine, asnd.StNo); //找这个invoice行已经导入了多少，和判退多少
Asndetailitem subItemNow = findNeedQTY_now as Asndetailitem;
subNeed = invdetail.PlanQty - subItemOld.Qty + (subItemOld.Qty - subItemOld.ReceiveQty) + (subItemOld.ReceiveQty - subItemOld.QcpassQty);
subNeed = subNeed - subItemNow.Qty;
if (subNeed == 0)
{
continue;
}
//如果箱数量大于需求数量差---进行拆分
if (sub > subNeed)
{
sub = sub - subNeed; // sub是剩余的
detailitem.Qty = subNeed;
detailitem.Invline = invdetail.InvLine.ToString();
detailitem.Invno = invdetail.InvNo;
detailitem.ActQty = detailitem.Qty;
detailitem.QcpassQty = detailitem.Qty;
detailitem.ReceiveQty = detailitem.Qty;
_warehouseFacade.AddAsndetailitem(detailitem);
}
//如果箱单数量小于等于需求数量差--直接填入
else
{
detailitem.Qty = sub;
detailitem.Invline = invdetail.InvLine.ToString();
detailitem.Invno = invdetail.InvNo;
detailitem.ActQty = detailitem.Qty;
detailitem.QcpassQty = detailitem.Qty;
detailitem.ReceiveQty = detailitem.Qty;
_warehouseFacade.AddAsndetailitem(detailitem);
sub = 0;
}
if (sub == 0)
{
break;
}
}
//如果sub>0，说明导入数量过多，报错
if (sub > 0)
{
this.DataProvider.RollbackTransaction();
throw new Exception("箱单导入数量与需求数量不符!");
}
}
i++;
}
_warehouseFacade.AddAsn(asn);
WarehouseFacade facade = new WarehouseFacade(base.DataProvider);
#region 在invinouttrans表中增加一条数据
//ASN asn = (ASN)domainObject;
DBDateTime dbTime1 = FormatHelper.GetNowDBDateTime(this.DataProvider);
InvInOutTrans trans = facade.CreateNewInvInOutTrans();
trans.CartonNO = string.Empty;
trans.DqMCode = string.Empty;
trans.FacCode = asn.FacCode;
trans.FromFacCode = asn.FromfacCode;
trans.FromStorageCode = asn.FromstorageCode;
trans.InvNO = asn.Invno;
trans.InvType = asn.StType;
trans.LotNo = string.Empty;
trans.MaintainDate = dbTime1.DBDate;
trans.MaintainTime = dbTime1.DBTime;
trans.MaintainUser = this.GetUserCode();
trans.MCode = string.Empty;
trans.ProductionDate = 0;
trans.Qty = 0;
trans.Serial = 0;
trans.StorageAgeDate = 0;
trans.StorageCode = asn.StorageCode;
trans.SupplierLotNo = string.Empty;
trans.TransNO = asn.Stno;
trans.TransType = "IN";
trans.Unit = string.Empty;
trans.ProcessType = "UBCreateASN";
facade.AddInvInOutTrans(trans);
#endregion
this.DataProvider.CommitTransaction();
return(stno);
}
catch (Exception ex)
{
this.DataProvider.RollbackTransaction();
throw ex;
}
}
protected void cmdSave_click(object sender, EventArgs e)
{
if (facade == null)
{
facade = new WarehouseFacade(base.DataProvider);
}
if (_Invenfacade == null)
{
_Invenfacade = new InventoryFacade(base.DataProvider);
}
DBDateTime dbTime = FormatHelper.GetNowDBDateTime(this.DataProvider);
int sum = 0;
int insum = 0;
object[] objs_asnd = facade.GetASNDetailByStNoAndDQMCode(poStno, DQMCode);
if (objs_asnd != null)
{
#region 检查维护的数量是否等于导入数量
for (int i = 0; i < this.gridWebGrid.Rows.Count; i++)
{
if (!string.IsNullOrEmpty(this.gridWebGrid.Rows[i].Items.FindItemByKey("INQTY").Value.ToString()))
{
try
{
insum += int.Parse(this.gridWebGrid.Rows[i].Items.FindItemByKey("INQTY").Value.ToString());
}
catch (Exception ex)
{
WebInfoPublish.Publish(this, "来料数量必须是数字格式" + ex.Message, this.languageComponent1);
return;
}
}
}
foreach (Asndetail asnd in objs_asnd)
{
sum += asnd.Qty;
}
if (insum != sum)
{
WebInfoPublish.Publish(this, "分配数量不等于导入数量", this.languageComponent1);
return;
}
#endregion
this.DataProvider.BeginTransaction();
#region 除asndetailitem表中原有的数据（stno，dqmcode）
foreach (Asndetail asnd in objs_asnd)
{
object[] objs_asnditem = facade.GetASNDetailItembyStnoAndStline(asnd.Stno, asnd.Stline);
foreach (Asndetailitem asnditem_old in objs_asnditem)
{
facade.DeleteAsndetailitem(asnditem_old);
}
}
#endregion
//#region 根据grid表重新写asndetailitem
//int PlanQty = 0;
//for (int i = 0; i < this.gridWebGrid.Rows.Count; i++)
//{
// if (!string.IsNullOrEmpty(this.gridWebGrid.Rows[i].Items.FindItemByKey("POQTY").Value.ToString()) || int.Parse(this.gridWebGrid.Rows[i].Items.FindItemByKey("POQTY").Value.ToString())!=0)
// {
// PlanQty = int.Parse(this.gridWebGrid.Rows[i].Items.FindItemByKey("POQTY").Value.ToString());
// Asndetailitem asnditem_new = facade.CreateNewAsndetailitem();
// foreach (Asndetail asnd in objs_asnd)
// {
// if(asnd.Qty)
// }
// }
//}
#region 插入tblasndetailITEM
foreach (Asndetail asnd in objs_asnd)
{
Asndetailitem detailitem = facade.CreateNewAsndetailitem();
detailitem.CDate = dbTime.DBDate;
detailitem.CTime = dbTime.DBTime;
detailitem.CUser = this.GetUserCode();
detailitem.MaintainDate = dbTime.DBDate;
detailitem.MaintainTime = dbTime.DBTime;
detailitem.MaintainUser = this.GetUserCode();
detailitem.Stline = asnd.Stline.ToString();
detailitem.Stno = asnd.Stno;
detailitem.MCode = asnd.MCode;
detailitem.DqmCode = asnd.DqmCode;
//detailitem.ActQty = 0;
//detailitem.QcpassQty = 0;
//detailitem.ReceiveQty = 0;
//查找对应的SAP单
decimal sub = asnd.Qty;
for (int i = 0; i < this.gridWebGrid.Rows.Count; i++)
{
if (!string.IsNullOrEmpty(this.gridWebGrid.Rows[i].Items.FindItemByKey("INQTY").Value.ToString()) || int.Parse(this.gridWebGrid.Rows[i].Items.FindItemByKey("INQTY").Value.ToString()) != 0)
{
//InvoicesDetail invdetail = qtyobjs[i] as InvoicesDetail;
decimal subNeed = decimal.Parse(this.gridWebGrid.Rows[i].Items.FindItemByKey("POQTY").Value.ToString()) - decimal.Parse(this.gridWebGrid.Rows[i].Items.FindItemByKey("IN1QTY").Value.ToString());
if (subNeed < decimal.Parse(this.gridWebGrid.Rows[i].Items.FindItemByKey("INQTY").Value.ToString()))
{
this.DataProvider.RollbackTransaction();
WebInfoPublish.Publish(this, "分配数量大于所需数量", this.languageComponent1);
return;
}
object findNeedQTY_now = facade.GetNeedImportQtyNow(this.gridWebGrid.Rows[i].Items.FindItemByKey("invno").Value.ToString(), Int32.Parse(this.gridWebGrid.Rows[i].Items.FindItemByKey("POITEMNO").Value.ToString()), asnd.Stno); //找这个invoice行已经导入了多少，和判退多少
Asndetailitem subItemNow = findNeedQTY_now as Asndetailitem;
subNeed = decimal.Parse(this.gridWebGrid.Rows[i].Items.FindItemByKey("INQTY").Value.ToString()) - subItemNow.Qty;
if (subNeed == 0)
{
continue;
}
//如果箱数量大于需求数量差---进行拆分
if (sub > subNeed)
{
sub = sub - subNeed; // sub是剩余的
detailitem.Qty = subNeed;
detailitem.Invline = this.gridWebGrid.Rows[i].Items.FindItemByKey("POITEMNO").Value.ToString();
detailitem.Invno = this.gridWebGrid.Rows[i].Items.FindItemByKey("invno").Value.ToString();
detailitem.ActQty = detailitem.Qty;
detailitem.QcpassQty = detailitem.Qty;
detailitem.ReceiveQty = detailitem.Qty;
facade.AddAsndetailitem(detailitem);
}
//如果箱单数量小于等于需求数量差--直接填入
else
{
detailitem.Qty = sub;
detailitem.Invline = this.gridWebGrid.Rows[i].Items.FindItemByKey("POITEMNO").Value.ToString();
detailitem.Invno = this.gridWebGrid.Rows[i].Items.FindItemByKey("invno").Value.ToString();
detailitem.ActQty = detailitem.Qty;
detailitem.QcpassQty = detailitem.Qty;
detailitem.ReceiveQty = detailitem.Qty;
facade.AddAsndetailitem(detailitem);
sub = 0;
}
if (sub == 0)
{
break;
}
}
}
//如果sub>0，说明导入数量过多，报错
if (sub > 0)
{
this.DataProvider.RollbackTransaction();
WebInfoPublish.Publish(this, "$Error_SAP_NEED_DATA_ERROR", this.languageComponent1);
// BenQGuru.eMES.Common.ExceptionManager.Raise(this.GetType().BaseType, "$Error_SAP_NEED_DATA_ERROR");
return;
}
}
#endregion
}
else
{
this.DataProvider.RollbackTransaction();
WebInfoPublish.Publish(this, "AsnDetail中没有数据", this.languageComponent1);
return;
}
this.DataProvider.CommitTransaction();
WebInfoPublish.Publish(this, "保存成功", this.languageComponent1);
this.gridHelper.RequestData();
return;
}
