// Performs a OTAA join and sends N confirmed and unconfirmed messages
// Expects that:
// - device message is available on IoT Hub
// - frame counter validation is done
// - Message is decoded
private async Task Test_OTAA_Confirmed_And_Unconfirmed_Message_With_Custom_RX1_DR_Offset(TestDeviceInfo device)
{
const int MESSAGES_COUNT = 10;
await ArduinoDevice.setDeviceModeAsync(LoRaArduinoSerial._device_mode_t.LWOTAA);
await ArduinoDevice.setIdAsync(device.DevAddr, device.DeviceID, device.AppEui);
await ArduinoDevice.setKeyAsync(device.NwkSKey, device.AppSKey, device.AppKey);
await ArduinoDevice.SetupLora(TestFixtureCi.Configuration);
var joinSucceeded = await ArduinoDevice.setOTAAJoinAsyncWithRetry(LoRaArduinoSerial._otaa_join_cmd_t.JOIN, 20000, 5);
Assert.True(joinSucceeded, "Join failed");
// wait 1 second after joined
await Task.Delay(Constants.DELAY_FOR_SERIAL_AFTER_JOIN);
if (device.IsMultiGw)
{
await TestFixtureCi.WaitForTwinSyncAfterJoinAsync(ArduinoDevice.SerialLogs, device.DevEui);
}
// Sends 10x unconfirmed messages
for (var i = 0; i < MESSAGES_COUNT; ++i)
{
Console.WriteLine($"Starting sending OTAA unconfirmed message {i + 1}/{MESSAGES_COUNT}");
TestFixtureCi.ClearLogs();
var msg = PayloadGenerator.Next().ToString(CultureInfo.InvariantCulture);
await ArduinoDevice.transferPacketAsync(msg, 10);
await Task.Delay(Constants.DELAY_FOR_SERIAL_AFTER_SENDING_PACKET);
// After transferPacket: Expectation from serial
// +MSG: Done
await AssertUtils.ContainsWithRetriesAsync("+MSG: Done", ArduinoDevice.SerialLogs);
// 0000000000000004: valid frame counter, msg: 1 server: 0
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: valid frame counter, msg:");
// 0000000000000004: decoding with: DecoderValueSensor port: 8
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: decoding with: {device.SensorDecoder} port:");
// 0000000000000004: message '{"value": 51}' sent to hub
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: message '{{\"value\":{msg}}}' sent to hub");
// Ensure device payload is available
// Data: {"value": 51}
var expectedPayload = $"{{\"value\":{msg}}}";
await TestFixtureCi.AssertIoTHubDeviceMessageExistsAsync(device.DeviceID, expectedPayload, new SearchLogOptions(expectedPayload));
await Task.Delay(Constants.DELAY_BETWEEN_MESSAGES);
}
// Sends 10x confirmed messages
for (var i = 0; i < MESSAGES_COUNT; ++i)
{
Console.WriteLine($"Starting sending OTAA confirmed message {i + 1}/{MESSAGES_COUNT}");
TestFixtureCi.ClearLogs();
var msg = PayloadGenerator.Next().ToString(CultureInfo.InvariantCulture);
await ArduinoDevice.transferPacketWithConfirmedAsync(msg, 10);
await Task.Delay(Constants.DELAY_FOR_SERIAL_AFTER_SENDING_PACKET);
if (device.IsMultiGw)
{
// multi gw, make sure one ignored the message
var searchTokenSending = $"{device.DeviceID}: sending message to station with EUI";
var sending = await TestFixtureCi.SearchNetworkServerModuleAsync((log) => log.StartsWith(searchTokenSending, StringComparison.OrdinalIgnoreCase), new SearchLogOptions(searchTokenSending));
Assert.NotNull(sending.MatchedEvent);
var searchTokenAlreadySent = $"{device.DeviceID}: another gateway has already sent ack or downlink msg";
var ignored = await TestFixtureCi.SearchNetworkServerModuleAsync((log) => log.StartsWith(searchTokenAlreadySent, StringComparison.OrdinalIgnoreCase), new SearchLogOptions(searchTokenAlreadySent));
Assert.NotNull(ignored.MatchedEvent);
Assert.NotEqual(sending.MatchedEvent.SourceId, ignored.MatchedEvent.SourceId);
}
// After transferPacketWithConfirmed: Expectation from serial
// +CMSG: ACK Received
await AssertUtils.ContainsWithRetriesAsync("+CMSG: ACK Received", ArduinoDevice.SerialLogs, maxAttempts : 5, interval : TimeSpan.FromSeconds(10));
// 0000000000000004: decoding with: DecoderValueSensor port: 8
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: decoding with: {device.SensorDecoder} port:");
// 0000000000000004: message '{"value": 51}' sent to hub
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: message '{{\"value\":{msg}}}' sent to hub");
if (ArduinoDevice.SerialLogs.Any(x => x.StartsWith("+CMSG: RXWIN1", StringComparison.Ordinal)))
{
// Expect that the response is done on DR4 as the RX1 offset is 1 on this device.
const string logMessage = "\"Rx1\":{\"DataRate\":4";
await TestFixtureCi.AssertNetworkServerModuleLogExistsAsync(log => log.Contains(logMessage, StringComparison.Ordinal), new SearchLogOptions(logMessage));
}
// Ensure device payload is available
// Data: {"value": 51}
var expectedPayload = $"{{\"value\":{msg}}}";
await TestFixtureCi.AssertIoTHubDeviceMessageExistsAsync(device.DeviceID, expectedPayload, new SearchLogOptions(expectedPayload));
await Task.Delay(Constants.DELAY_BETWEEN_MESSAGES);
}
}
public async Task Test_ABP_Device_With_Connection_Timeout()
{
LogTestStart(new TestDeviceInfo[] { TestFixtureCi.Device25_ABP, TestFixtureCi.Device26_ABP });
// Sends 1 message from device 25
var device25 = TestFixtureCi.Device25_ABP;
await ArduinoDevice.setDeviceModeAsync(LoRaArduinoSerial._device_mode_t.LWABP);
await ArduinoDevice.setIdAsync(device25.DevAddr, device25.DeviceID, null);
await ArduinoDevice.setKeyAsync(device25.NwkSKey, device25.AppSKey, null);
await ArduinoDevice.SetupLora(TestFixtureCi.Configuration);
await ArduinoDevice.transferPacketAsync(GeneratePayloadMessage(), 10);
var expectedLog = $"{device25.DeviceID}: processing time";
await TestFixtureCi.SearchNetworkServerModuleAsync((log) => log.StartsWith(expectedLog, StringComparison.Ordinal), new SearchLogOptions(expectedLog));
// wait 61 seconds
await Task.Delay(TimeSpan.FromSeconds(120));
// Send 1 message from device 26
var device26 = TestFixtureCi.Device26_ABP;
await ArduinoDevice.setDeviceModeAsync(LoRaArduinoSerial._device_mode_t.LWABP);
await ArduinoDevice.setIdAsync(device26.DevAddr, device26.DeviceID, null);
await ArduinoDevice.setKeyAsync(device26.NwkSKey, device26.AppSKey, null);
await ArduinoDevice.SetupLora(TestFixtureCi.Configuration);
await ArduinoDevice.transferPacketAsync(GeneratePayloadMessage(), 10);
await Task.Delay(Constants.DELAY_BETWEEN_MESSAGES);
var expectedLog2 = $"{device25.DeviceID}: device client disconnected";
var result = await TestFixtureCi.SearchNetworkServerModuleAsync(
msg => msg.StartsWith(expectedLog2, StringComparison.Ordinal),
new SearchLogOptions(expectedLog2)
{
MaxAttempts = 10,
SourceIdFilter = device25.GatewayID,
});
Assert.NotNull(result.MatchedEvent);
TestFixtureCi.ClearLogs();
// Send 1 message from device 25 and check that connection was restablished
await ArduinoDevice.setDeviceModeAsync(LoRaArduinoSerial._device_mode_t.LWABP);
await ArduinoDevice.setIdAsync(device25.DevAddr, device25.DeviceID, null);
await ArduinoDevice.setKeyAsync(device25.NwkSKey, device25.AppSKey, null);
await ArduinoDevice.SetupLora(TestFixtureCi.Configuration);
var expectedMessage = GeneratePayloadMessage();
await ArduinoDevice.transferPacketAsync(expectedMessage, 10);
// After transferPacket: Expectation from serial
// +MSG: Done
await AssertUtils.ContainsWithRetriesAsync("+MSG: Done", ArduinoDevice.SerialLogs);
// 0000000000000005: message '{"value": 51}' sent to hub
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device25.DeviceID}: message '{{\"value\":{expectedMessage}}}' sent to hub");
// "device client reconnected"
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device25.DeviceID}: device client reconnected");
}
// Performs a OTAA join and sends 1 unconfirmed, 1 confirmed and rejoins
private async Task Test_OTAA_Join_Send_And_Rejoin_With_Custom_RX2_DR(TestDeviceInfo device)
{
await ArduinoDevice.setDeviceModeAsync(LoRaArduinoSerial._device_mode_t.LWOTAA);
await ArduinoDevice.setIdAsync(device.DevAddr, device.DeviceID, device.AppEui);
await ArduinoDevice.setKeyAsync(device.NwkSKey, device.AppSKey, device.AppKey);
await ArduinoDevice.SetupLora(TestFixtureCi.Configuration);
var joinSucceeded = await ArduinoDevice.setOTAAJoinAsyncWithRetry(LoRaArduinoSerial._otaa_join_cmd_t.JOIN, 20000, 5);
Assert.True(joinSucceeded, "Join failed");
// wait 1 second after joined
await Task.Delay(Constants.DELAY_FOR_SERIAL_AFTER_JOIN);
if (device.IsMultiGw)
{
await TestFixtureCi.WaitForTwinSyncAfterJoinAsync(ArduinoDevice.SerialLogs, device.DevEui);
}
// Sends 1x unconfirmed messages
TestFixtureCi.ClearLogs();
var msg = PayloadGenerator.Next().ToString(CultureInfo.InvariantCulture);
await ArduinoDevice.transferPacketAsync(msg, 10);
await Task.Delay(Constants.DELAY_FOR_SERIAL_AFTER_SENDING_PACKET);
// After transferPacket: Expectation from serial
// +MSG: Done
await AssertUtils.ContainsWithRetriesAsync("+MSG: Done", ArduinoDevice.SerialLogs);
// 0000000000000004: valid frame counter, msg: 1 server: 0
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: valid frame counter, msg:");
// 0000000000000004: decoding with: DecoderValueSensor port: 8
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: decoding with: {device.SensorDecoder} port:");
// 0000000000000004: message '{"value": 51}' sent to hub
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: message '{{\"value\":{msg}}}' sent to hub");
// Ensure device payload is available
// Data: {"value": 51}
var expectedPayload = $"{{\"value\":{msg}}}";
await TestFixtureCi.AssertIoTHubDeviceMessageExistsAsync(device.DeviceID, expectedPayload, new SearchLogOptions(expectedPayload));
await Task.Delay(Constants.DELAY_BETWEEN_MESSAGES);
TestFixtureCi.ClearLogs();
msg = PayloadGenerator.Next().ToString(CultureInfo.InvariantCulture);
await ArduinoDevice.transferPacketWithConfirmedAsync(msg, 10);
await Task.Delay(Constants.DELAY_FOR_SERIAL_AFTER_SENDING_PACKET);
// After transferPacketWithConfirmed: Expectation from serial
// +CMSG: ACK Received
await AssertUtils.ContainsWithRetriesAsync("+CMSG: ACK Received", ArduinoDevice.SerialLogs);
// Checking than the communication occurs on DR 4 and RX2 as part of preferred windows RX2 and custom RX2 DR
await AssertUtils.ContainsWithRetriesAsync(x => x.StartsWith("+CMSG: RXWIN2", StringComparison.Ordinal), ArduinoDevice.SerialLogs);
// this test has a custom datarate for RX 2 of 3
const string logMessage2 = "\"Rx2\":{\"DataRate\":3";
await TestFixtureCi.AssertNetworkServerModuleLogExistsAsync(x => x.Contains(logMessage2, StringComparison.Ordinal), new SearchLogOptions(logMessage2));
// 0000000000000004: decoding with: DecoderValueSensor port: 8
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: decoding with: {device.SensorDecoder} port:");
// 0000000000000004: message '{"value": 51}' sent to hub
await TestFixtureCi.AssertNetworkServerModuleLogStartsWithAsync($"{device.DeviceID}: message '{{\"value\":{msg}}}' sent to hub");
// Ensure device payload is available
// Data: {"value": 51}
expectedPayload = $"{{\"value\":{msg}}}";
await TestFixtureCi.AssertIoTHubDeviceMessageExistsAsync(device.DeviceID, expectedPayload, new SearchLogOptions(expectedPayload));
await Task.Delay(Constants.DELAY_BETWEEN_MESSAGES);
// rejoin
await ArduinoDevice.setDeviceModeAsync(LoRaArduinoSerial._device_mode_t.LWOTAA);
await ArduinoDevice.setIdAsync(device.DevAddr, device.DeviceID, device.AppEui);
await ArduinoDevice.setKeyAsync(device.NwkSKey, device.AppSKey, device.AppKey);
await ArduinoDevice.SetupLora(TestFixtureCi.Configuration);
var joinSucceeded2 = await ArduinoDevice.setOTAAJoinAsyncWithRetry(LoRaArduinoSerial._otaa_join_cmd_t.JOIN, 20000, 5);
Assert.True(joinSucceeded2, "Rejoin failed");
if (device.IsMultiGw)
{
const string joinRefusedMsg = "join refused";
var joinRefused = await TestFixtureCi.AssertNetworkServerModuleLogExistsAsync((s) => s.IndexOf(joinRefusedMsg, StringComparison.Ordinal) != -1, new SearchLogOptions(joinRefusedMsg));
Assert.True(joinRefused.Found);
}
}