/// <summary>
/// 获取输出的标签
/// </summary>
/// <typeparam name="T">类型</typeparam>
/// <param name="ObjectId">ID</param>
/// <param name="OutTypevalue"></param>
/// <returns></returns>
public T GetLightTowerOutTag <T>(int ObjectId, int OutTypevalue, TagAreaAttributeEnum tagAreaAttributeEnum) where T : new()
{
List <T> list = null;
T TagInfo = default(T);
switch (OutTypevalue)
{
case (int)LightTowerEnum.red_light_on:
list = tagService.GetWaTagAndTypeInfo <T>(tagAreaAttributeEnum, ObjectId, SystemTagCodeEnum.red_light_on.ToString());
break;
case (int)LightTowerEnum.yellow_light_on:
list = tagService.GetWaTagAndTypeInfo <T>(tagAreaAttributeEnum, ObjectId, SystemTagCodeEnum.yellow_light_on.ToString());
break;
case (int)LightTowerEnum.green_light_on:
list = tagService.GetWaTagAndTypeInfo <T>(tagAreaAttributeEnum, ObjectId, SystemTagCodeEnum.green_light_on.ToString());
break;
case (int)LightTowerEnum.blue_light_on:
list = tagService.GetWaTagAndTypeInfo <T>(tagAreaAttributeEnum, ObjectId, SystemTagCodeEnum.blue_light_on.ToString());
break;
case (int)LightTowerEnum.white_light_on:
list = tagService.GetWaTagAndTypeInfo <T>(tagAreaAttributeEnum, ObjectId, SystemTagCodeEnum.white_light_on.ToString());
break;
}
if (list != null && list.Count > 0)
{
TagInfo = list[0];
return(TagInfo);
}
return(TagInfo);
}
/// <summary>
/// 初始化：灯状态输出
/// </summary>
public static void TaskInitial(TagAreaAttributeEnum tagAreaAttributeEnum)
{
string times = srpInnerLogManager.GetLastTimeByCode(SrpCode);
lastDatetime = Convert.ToDateTime(times); //获取上一次的时间记录
if (tagAreaAttributeEnum == TagAreaAttributeEnum.machine_info)
{
List <MachineInfo> machines = machineInfoManager.SelectAll(null);
foreach (MachineInfo machine in machines)
{
lightTowerTagManager.GreenStatusLightOutAsync(machine.machine_id, tagAreaAttributeEnum);
}
}
else if (tagAreaAttributeEnum == TagAreaAttributeEnum.station_info)
{
List <station_info> stations = stationManager.SelectAll(-1);
foreach (station_info station in stations)
{
lightTowerTagManager.GreenStatusLightOutAsync(station.station_id, tagAreaAttributeEnum);
}
}
//公式需要优化
//
////读取所有的设备工时异常配置
//deviceTimeErrCfgList = errorConfigManager.GetErrorConfig(SystemTagCodeEnum.machine_time_error.ToString());
//if(deviceTimeErrCfgList != null && deviceTimeErrCfgList.Count>0)//存在工时的异常配置
//{
// CTManager.CtValueChangedEvent += CTManager_CtValueChangedEvent;
//}
}
/// <summary>
/// 人员签到处理.以Tag点形式上抛的。方案待优化！！！！！！！！！！！！！！！！！！！
/// </summary>
/// <param name="machineCode"></param>
/// <param name="stationId"></param>
/// <param name="deviceTagValueInfo"></param>
/// <param name="tagAreaAttributeEnum"></param>
public static void HandlePersonArrivalForTag(string machineCode, int stationId,
DeviceTagValueInfo deviceTagValueInfo,
TagAreaAttributeEnum tagAreaAttributeEnum = TagAreaAttributeEnum.station_info)
{
string subject = string.Empty, content = string.Empty;
ErrorObject errorObject = andonErrorManager.AckErrorLogPerson(machineCode, stationId, deviceTagValueInfo, tagAreaAttributeEnum);
if (errorObject != null)
{
HandlePersonArrival(null, null, errorObject);
}
}
/// <summary>
/// 灯颜色输出写值
/// </summary>
/// <param name="device_id"></param>
/// <param name="ColorValue"></param>
/// <param name="tagAreaAttributeEnum"></param>
public bool WriteLightColorAsync(int device_id, int ColorValue, TagAreaAttributeEnum tagAreaAttributeEnum, int Value)
{
bool bit = false;
if (tagAreaAttributeEnum == TagAreaAttributeEnum.machine_info)
{
MachineTagInfo tagInfo = GetLightTowerOutTag <MachineTagInfo>(device_id, ColorValue, tagAreaAttributeEnum);
if (tagInfo != null)
{
if (ScadaAPIConfig.EnableScadaApi)
{
bit = ScadaAPIHelper.WriteValueAsync(tagInfo.tag_code, Value);
if (bit == false)
{
bit = ScadaAPIHelper.WriteValueAsync(tagInfo.tag_code, Value);//失败再次写入
}
}
else
{
//MqttManager.MqttHelper.WriteValueToWA(tagInfo.tag_code, Value);//写值
}
}
}
else if (tagAreaAttributeEnum == TagAreaAttributeEnum.station_info)
{
try
{
StationTagInfo tagInfo = GetLightTowerOutTag <StationTagInfo>(device_id, ColorValue, tagAreaAttributeEnum);
if (tagInfo != null)
{
if (ScadaAPIConfig.EnableScadaApi)
{
bit = ScadaAPIHelper.WriteValueAsync(tagInfo.tag_code, Value);
if (bit == false)
{
bit = ScadaAPIHelper.WriteValueAsync(tagInfo.tag_code, Value);//失败再次写入
}
}
else
{
//MqttManager.MqttHelper.WriteValueToWA(tagInfo.tag_code, Value);//写值
}
}
}
catch (Exception ex)
{
Console.WriteLine(ex.Message);
bit = false;
}
}
return(bit);
}
/// <summary>
/// 现场正常状态下绿灯输出
/// </summary>
/// <param name="tagAreaAttributeEnum"></param>
public bool GreenStatusLightOutAsync(int device_id, TagAreaAttributeEnum tagAreaAttributeEnum)
{
List <error_log> list;
bool bit = false;
list = errorLogManager.GetAllUnfinishedByDeviceId(device_id);
if (list != null && list.Count > 0)//有异常，绿灯熄灭
{
bit = WriteLightColorAsync(device_id, (int)LightTowerEnum.green_light_on, tagAreaAttributeEnum, 0);
}
else
{
bit = WriteLightColorAsync(device_id, (int)LightTowerEnum.green_light_on, tagAreaAttributeEnum, 1);
}
return(bit);
}
/// <summary>
/// 处理异常解除,以tag点方式，待实际场合进一步优化代码！！！！！！！！！！！！！！！！！！！！！！！！！！1
/// </summary>
/// <param name="machineCode"></param>
/// <param name="stationId"></param>
/// <param name="deviceTagValueInfo"></param>
/// <param name="tagAreaAttributeEnum"></param>
public static void HandleErrorAckForTag(string machineCode, int stationId,
DeviceTagValueInfo deviceTagValueInfo,
TagAreaAttributeEnum tagAreaAttributeEnum = TagAreaAttributeEnum.station_info)
{
string subject = string.Empty, content = string.Empty;
ErrorObject errorObject = null;
if (deviceTagValueInfo.system_tag_code == SystemTagCodeEnum.material_require.ToString())
{
errorObject = andonErrorManager.AckErrorLogDetailsForMat(machineCode, stationId, deviceTagValueInfo, tagAreaAttributeEnum);
}
else
{
errorObject = andonErrorManager.AckErrorLogDetails(machineCode, stationId, deviceTagValueInfo, tagAreaAttributeEnum);
}
HandleErrorAck(null, null, errorObject);
}
/// <summary>
/// 责任人员现场签到
/// 现场提交有3格式：card或者id&card,id&card&M
/// 格式1：只有card内容时，为HMI触控屏发送的格式，此方式只能确认第一条记录,HMI触控屏无物料呼叫列表；
/// 格式2：id&card格式：为Web网页异常呼叫时传递内容。Id为error_log表id，card为人员卡号；
/// 格式3：id&card&M:为web网页物料呼叫传递内容，id为material_require_info表id，card为人员卡号，M为特殊标识符
/// </summary>
/// <param name="ErrorWatchList">异常监控队列</param>
/// <param name="MachineCode">设备编码</param>
/// <param name="StationId">站位id</param>
/// <param name="TagValueInItem">标签值对象</param>
/// <returns></returns>
public ErrorObject AckErrorLogPerson(string MachineCode, int StationId,
DeviceTagValueInfo TagValueInItem,
TagAreaAttributeEnum tagAreaAttributeEnum = TagAreaAttributeEnum.station_info)
{
ErrorTypeService errorTypeService = new ErrorTypeService();
person person = null;
ErrorObject errorObject = null;
string PersonCardId = String.Empty;
int errorLogId = -1;
material_request_info reInfo = null;
TagIdAndValue valueObject = tagService.GetTagValue(TagValueInItem.tag_value);
if (tagAreaAttributeEnum == TagAreaAttributeEnum.machine_info)
{
MachineInfo machine = AndonGlobalCfg.MachinesList.FirstOrDefault(x => x.machine_code == MachineCode);
errorObject = LoadErrorLogObject(TagValueInItem.device_id, TagValueInItem.system_tag_code, machine.unit_no, machine.line_id);
}
else if (tagAreaAttributeEnum == TagAreaAttributeEnum.station_info)
{
station_info station = AndonGlobalCfg.StationsList.FirstOrDefault(x => x.station_id == StationId);
errorObject = LoadErrorLogObject(TagValueInItem.device_id, TagValueInItem.system_tag_code, station.unit_no, station.line_id);
}
if (valueObject.value == null || valueObject.value.Trim().Length == 0)
{
return(null); //值无效
}
else
{
if (valueObject.id >= 0 && valueObject.value.Length > 0 && valueObject.value2.Length == 0)
{
errorLogId = valueObject.id;
PersonCardId = valueObject.value;
Console.WriteLine("AckErrorLogPerson,errorLogId=" + errorLogId + ",PersonCardId=" + PersonCardId);
}
else if (valueObject.id >= 0 && valueObject.value.Length > 0 && valueObject.value2.Length > 0)//物料呼叫传递内容
{
reInfo = materialRequestInfoManager.SelectById(valueObject.id);
PersonCardId = valueObject.value;
Console.WriteLine("AckErrorLogPerson,物料呼叫传递,PersonCardId=" + PersonCardId);
}
else if (valueObject.id < 0 && valueObject.value.Length > 0)
{
PersonCardId = valueObject.value;
Console.WriteLine("AckErrorLogPerson,PersonCardId=" + PersonCardId);
}
}
if (errorObject.eConfig.check_arrival == (int)ArrivalModeEnum.CardArrival) //以卡信息签到
{
if (PersonCardId.Length > 0) //获取具体的描述对象
{
person = personManager.GetPersonByCardId(PersonCardId);
if (person == null)
{
return(null);
}
}
else
{
return(null);
}
}
if (errorObject != null && errorObject.ELog != null)
{
errorObject.ELog.arrival_time = TagValueInItem.insert_time.AddHours(GlobalDefine.SysTimeZone); //时间加8小时,更新结束时间
Dictionary <string, object> dic = new Dictionary <string, object>();
if (errorObject.eConfig.check_arrival == (int)ArrivalModeEnum.CardArrival)
{
errorObject.eSignedPersons.Add(person); //记录签到的人员
errorObject.ELog.arrival_person_id = person.id; //更新具体的id信息
dic.Add("arrival_person_id", errorObject.ELog.arrival_person_id);
errorObject.eSignedPersons.Add(person); //签到人员记录
}
dic.Add("arrival_time", errorObject.ELog.arrival_time);
errorLogManager.Update(errorObject.ELog, dic); //提交数据库
Console.WriteLine("AckErrorLogPerson,执行结束,id=" + errorObject.ELog.id);
return(errorObject);
}
return(null);
}
/// <summary>
/// 确认并解除异常记录,用于现场提交解除.
/// 格式1：id&M&M:为web网页物料呼叫传递内容，id为material_require_info表id，M为特殊标识符
/// 格式2：id:为web网页物料呼叫传递内容，id为error_log表id
/// </summary>
/// <param name="ErrorWatchList">当前监控队列</param>
/// <param name="MachineCode">设备编码</param>
/// <param name="StationId">站位id</param>
/// <param name="TagValueInItem">标签值对象</param>
/// <returns>正确执行返回ErrorObject，错误执行返回null</returns>
public ErrorObject AckErrorLogDetailsForMat(string MachineCode, int StationId,
DeviceTagValueInfo TagValueInItem,
TagAreaAttributeEnum tagAreaAttributeEnum)
{
ErrorTypeService errorTypeService = new ErrorTypeService();
ErrorObject errorObject = null;
int errorLogId = -1;
material_request_info reInfo = null;
//支持两种格式，sn或者id&sn，id为异常记录的唯一标识号
TagIdAndValue valueObject = tagService.GetTagValue(TagValueInItem.tag_value);
if (tagAreaAttributeEnum == TagAreaAttributeEnum.machine_info)
{
MachineInfo machine = AndonGlobalCfg.MachinesList.FirstOrDefault(x => x.machine_code == MachineCode);
errorObject = LoadErrorLogObject(TagValueInItem.device_id, TagValueInItem.system_tag_code, machine.unit_no, machine.line_id);
}
else if (tagAreaAttributeEnum == TagAreaAttributeEnum.station_info)
{
station_info station = AndonGlobalCfg.StationsList.FirstOrDefault(x => x.station_id == StationId);
errorObject = LoadErrorLogObject(TagValueInItem.device_id, TagValueInItem.system_tag_code, station.unit_no, station.line_id);
}
if (valueObject.value != null && valueObject.value.Trim().Length >= 0)
{
if (AndonGlobalCfg.MaterialType == 0)
{
errorLogId = valueObject.id;
}
else
{
if (valueObject.id >= 0 && valueObject.value.Length > 0 && valueObject.value2.Length > 0)//物料呼叫确认
{
reInfo = materialRequestInfoManager.SelectById(valueObject.id);
Console.WriteLine("AckErrorLogDetails,errorLogId=" + errorLogId);
Console.WriteLine("AckErrorLogDetails,物料呼叫=" + valueObject.id);
}
}
}
if (errorObject != null && errorObject.ELog != null)
{
if (reInfo != null) //物料呼叫确认的对象
{
errorObject.ELog.error_type_id = reInfo.material_id; //更新为物料id信息
errorObject.ELog.maintenance_time = TagValueInItem.insert_time.AddHours(GlobalDefine.SysTimeZone);
errorObject.RequireMat = reInfo;
}
else
{
errorObject.ELog.error_type_id = -1; //只有呼叫，无具体信息
errorObject.eTypeDetails = null;
}
errorObject.ELog.release_time = TagValueInItem.insert_time.AddHours(GlobalDefine.SysTimeZone); //以变量值的时间更新结束时间
Dictionary <string, object> dic = new Dictionary <string, object>(); //加入需要更新的字段信息
if (errorObject.ELog.error_type_id > 0)
{
dic.Add("error_type_id", errorObject.ELog.error_type_id);//未确认原因的再给值。物料呼叫监测typeid会提前赋值
dic.Add("maintenance_time", errorObject.ELog.maintenance_time);
}
dic.Add("release_time", errorObject.ELog.release_time);
errorLogManager.Update(errorObject.ELog, dic); //提交数据库
Console.WriteLine("AckErrorLogDetails,确认成功,id=" + errorObject.ELog.id);
return(errorObject);
}
return(null);
}
/// <summary>
/// 确认并解除异常记录,用于现场提交解除.
/// 支持三种格式：sn或者id&sn,id&M&M
/// 格式1：只有card内容时，为HMI触控屏发送的格式，此方式只能确认第一条记录,HMI触控屏无物料呼叫列表；
/// </summary>
/// <param name="ErrorWatchList">当前监控队列</param>
/// <param name="MachineCode">设备编码</param>
/// <param name="StationId">站位id</param>
/// <param name="TagValueInItem">标签值对象</param>
/// <returns>正确执行返回ErrorObject，错误执行返回null</returns>
public ErrorObject AckErrorLogDetails(string MachineCode, int StationId,
DeviceTagValueInfo TagValueInItem,
TagAreaAttributeEnum tagAreaAttributeEnum)
{
ErrorTypeService errorTypeService = new ErrorTypeService();
error_type_details eDetails = null;
ErrorObject errorObject = null;
string TypeSn = string.Empty;
int errorLogId = -1;
Dictionary <string, object> dic = new Dictionary <string, object>();//加入需要更新的字段信息
//支持两种格式，sn或者id&sn，id为异常记录的唯一标识号
TagIdAndValue valueObject = tagService.GetTagValue(TagValueInItem.tag_value);
if (tagAreaAttributeEnum == TagAreaAttributeEnum.machine_info)
{
MachineInfo machine = AndonGlobalCfg.MachinesList.FirstOrDefault(x => x.machine_code == MachineCode);
errorObject = LoadErrorLogObject(TagValueInItem.device_id, TagValueInItem.system_tag_code, machine.unit_no, machine.line_id);
}
else if (tagAreaAttributeEnum == TagAreaAttributeEnum.station_info)
{
station_info station = AndonGlobalCfg.StationsList.FirstOrDefault(x => x.station_id == StationId);
errorObject = LoadErrorLogObject(TagValueInItem.device_id, TagValueInItem.system_tag_code, station.unit_no, station.line_id);
}
if (errorObject != null && errorObject.eConfig != null &&
errorObject.eConfig.check_ack == (int)AckModeEnum.CodeAck)
{
if (valueObject.value != null && valueObject.value.Trim().Length >= 0)
{
if (valueObject.id >= 0 && valueObject.value.Length > 0 && valueObject.value2.Length == 0)
{
errorLogId = valueObject.id;
TypeSn = valueObject.value;
Console.WriteLine("AckErrorLogDetails,errorLogId=" + errorLogId + ",TypeSn=" + TypeSn);
}
else if (valueObject.id < 0 && valueObject.value.Length > 0)
{
TypeSn = valueObject.value;
Console.WriteLine("AckErrorLogDetails,TypeSn=" + TypeSn);
}
}
if (TypeSn.Length > 0)//获取具体的描述对象
{
eDetails = errorTypeService.GetTypeDetails(-1, TypeSn);
if (eDetails == null)
{
return(null);
}
}
else
{
return(null);
}
}
else if (errorObject != null && errorObject.eConfig != null &&
errorObject.eConfig.check_ack == (int)AckModeEnum.WithoutCodeAck)//不需要代码解除的
{
int.TryParse(valueObject.value, out errorLogId);
if (errorLogId != errorObject.ELog.id)//传递的id不匹配
{
Console.WriteLine("安灯解除出错，id不匹配退出：errorLogId=" + errorLogId + "errorObject.ELog.id=" + errorObject.ELog.id);
return(null);
}
}
if (errorObject != null && errorObject.ELog != null)
{
if (errorObject.eConfig.check_ack == (int)AckModeEnum.CodeAck)
{
errorObject.ELog.error_type_id = eDetails.id; //更新具体的id信息
errorObject.eTypeDetails = eDetails; //记录详细原因
errorObject.ELog.maintenance_time = TagValueInItem.insert_time.AddHours(GlobalDefine.SysTimeZone);
dic.Add("maintenance_time", errorObject.ELog.maintenance_time);
dic.Add("error_type_id", errorObject.ELog.error_type_id);//未确认原因的再给值。物料呼叫监测typeid会提前赋值
}
errorObject.ELog.release_time = TagValueInItem.insert_time.AddHours(GlobalDefine.SysTimeZone); //以变量值的时间更新结束时间
dic.Add("release_time", errorObject.ELog.release_time);
int count = errorLogManager.Update(errorObject.ELog, dic); //提交数据库
if (count > 0)
{
Console.WriteLine("AckErrorLogDetails,确认成功,id=" + errorObject.ELog.id);
}
else
{
Console.WriteLine("安灯解除更新数据失败！");
}
return(errorObject);
}
else
{
Console.WriteLine("安灯解除出错，errorObject != null && errorObject.ELog !=null 失败！");
}
return(null);
}
/// <summary>
/// 增加设备新的异常记录。会将该异常的所有配置，记录，人员，类型对象一次性加载并返回
/// </summary>
/// <param name="TagValueObject"></param>
/// <param name="eCodeDeatials"></param>
/// <returns>ErrorObject:包含该异常的配置，记录，需要通知的人员，以及类型</returns>
public ErrorObject AddNewErrorLog(DeviceTagValueInfo TagValueObject, ErrorObject errorObject,
TagAreaAttributeEnum tagAreaAttributeEnum, string AppendDetailsInfo = "")
{
int id = -1;
error_log eLog = new error_log();
MachineInfo machine = null;
station_info station = null;
Pro_schedule_machine deviceSchedule = null;
if (tagAreaAttributeEnum == TagAreaAttributeEnum.machine_info)//设备形式
{
machine = AndonGlobalCfg.MachinesList.FirstOrDefault(x => x.machine_code == TagValueObject.device_code);
deviceSchedule = proScheduleMachineManager.SelectOnLineWorkorder(TagValueObject.device_code);
}
else if (tagAreaAttributeEnum == TagAreaAttributeEnum.station_info)//站位形式
{
station = AndonGlobalCfg.StationsList.FirstOrDefault(x => x.station_id == TagValueObject.device_id);
deviceSchedule = proScheduleMachineManager.SelectOnLineWorkorder(TagValueObject.device_code);
}
if (machine != null || station != null)
{
if (deviceSchedule != null)//从在制进度中获取工单机种
{
eLog.pn = deviceSchedule.part_num;
eLog.work_order = deviceSchedule.work_order;
}
if (TagValueObject.system_tag_code == SystemTagCodeEnum.machine_time_error.ToString()) //工时异常类型
{
eLog.start_time = TagValueObject.insert_time; //CT从CT模块过来，无时差
}
else if (TagValueObject.system_tag_code == SystemTagCodeEnum.material_require.ToString()) //物料呼叫类型
{
eLog.start_time = TagValueObject.insert_time.AddHours(GlobalDefine.SysTimeZone); //加上时区
int requireCount = 0, materialId = 0;
//支持两种格式：数量，数量&物料id
TagIdAndValue valueObject = tagService.GetTagValue(TagValueObject.tag_value);
if (valueObject.id > 0 && valueObject.value.Length > 0)
{
requireCount = valueObject.id;
int.TryParse(valueObject.value, out materialId); //id为物料呼叫的id
eLog.error_type_id = materialId; //物料呼叫的id直接给到error_type_id字段
}
}
else
{
eLog.start_time = TagValueObject.insert_time.AddHours(GlobalDefine.SysTimeZone); //加上时区
}
eLog.arrival_time = default(DateTime); //分配默认时间
eLog.release_time = default(DateTime); //分配默认时间
eLog.maintenance_time = default(DateTime); //分配默认时间
if (machine != null)
{
eLog.machine_code = TagValueObject.device_code;
eLog.station_id = machine.station_id;
eLog.line_id = machine.line_id;
eLog.unit_no = machine.unit_no;
}
else
{
eLog.station_id = station.station_id;
eLog.machine_code = station.station_name_en;
eLog.line_id = station.line_id;
eLog.unit_no = station.unit_no;
}
eLog.system_tag_code = TagValueObject.system_tag_code;
eLog.error_name = errorObject.eConfig.error_name + AppendDetailsInfo;
if (errorObject.eConfig.check_ack == (int)AckModeEnum.NoAck)//只是记录，不需要确认
{
eLog.release_time = eLog.start_time;
}
eLog.ack_person_id = -1;//确认人员为空
if (eLog.error_type_id == 0)
{
eLog.error_type_id = -1;//确认编码为空
}
id = errorLogManager.Insert(eLog); //插入数据库
if (id > 0)
{
eLog.id = id; //id记录
errorObject.ELog = eLog;
}
}
return(errorObject);
}
/// <summary>
/// 根据Tag值信息加载所有信息.外部处理进入,需要确认和优化？？？？？？？？？？
/// </summary>
/// <param name="TagValueObject"></param>
/// <param name="tagAreaAttributeEnum"></param>
/// <returns></returns>
public ErrorObject LoadErrorObject(DeviceTagValueInfo TagValueObject, TagAreaAttributeEnum tagAreaAttributeEnum)
{
ErrorObject errorObject = new ErrorObject();
List <error_config_pn> eCfgPns;
string partNo = string.Empty;//当前机种
Pro_schedule_machine deviceSchedule = null;
if (tagAreaAttributeEnum == TagAreaAttributeEnum.machine_info)//设备形式
{
MachineInfo machine = AndonGlobalCfg.MachinesList.FirstOrDefault(x => x.machine_id == TagValueObject.device_id);
if (machine != null)
{
errorObject.eConfig = errorConfigManager.GetFirstErrorConfig(TagValueObject.system_tag_code, machine.unit_no, machine.line_id);
if (errorObject.eConfig == null)
{
errorObject.eConfig = errorConfigManager.GetFirstErrorConfig(TagValueObject.system_tag_code, machine.unit_no);
}
}
}
else if (tagAreaAttributeEnum == TagAreaAttributeEnum.station_info)//站位形式
{
station_info station = AndonGlobalCfg.StationsList.FirstOrDefault(x => x.station_id == TagValueObject.device_id);
if (station != null)
{
errorObject.eConfig = errorConfigManager.GetFirstErrorConfig(TagValueObject.system_tag_code, station.unit_no, station.line_id);
if (errorObject.eConfig == null)
{
errorObject.eConfig = errorConfigManager.GetFirstErrorConfig(TagValueObject.system_tag_code, station.unit_no);
}
}
}
if (errorObject.eConfig == null)
{
return(errorObject);
}
errorObject.DeviceCode = TagValueObject.device_code;
if (TagValueObject.system_type_code == SystemTagCodeEnum.quality_error.ToString())
{
eCfgPns = errorConfigPnManager.GetCfgPns(errorObject.eConfig.id);//获取该异常配置的机种信息
deviceSchedule = proScheduleMachineManager.SelectOnLineWorkorder(TagValueObject.device_code);
if (deviceSchedule != null)
{
partNo = deviceSchedule.part_num;//获取当前机种
}
if (eCfgPns != null && eCfgPns.Count > 0)
{
if (eCfgPns.Any(x => x.part_num.Equals(partNo))) //当前机种在此配置里面
{
errorObject.eCfgPnList = eCfgPns;
}
}
}
if (errorObject.eConfig != null)
{
errorObject.eCfgPersonList = errorPersonManager.GetCfgPersonList(errorObject.eConfig.id); //需通知的配置人员加载
eCfgPns = errorConfigPnManager.GetCfgPns(errorObject.eConfig.id);
errorObject.eCfgPnList = eCfgPns; //关联的机种信息加载
}
return(errorObject);
}
/// <summary>
/// 队列超时监测
/// </summary>
private static void TimeoutWatch(TagAreaAttributeEnum tagAreaAttributeEnum)
{
DateTime dateTime = DateTime.Now.AddHours(GlobalDefine.SysTimeZone);//此处需要加上时区
int timeDiffMin = 0, ratio = 0;
string subject = string.Empty, content = string.Empty;
AndonGlobalCfg.ErrorWatchList.Clear();
var list = errorLogManager.GetAllUnfinishedByDeviceCode(null);
if (list != null && list.Count > 0)
{
foreach (var item in list)
{
var errObject = andonErrorManager.LoadErrorLogObject(item);
AndonGlobalCfg.ErrorWatchList.Add(errObject);
}
}
try
{
for (int i = 0; i < AndonGlobalCfg.ErrorWatchList.Count; i++)
{
ErrorObject errItem = AndonGlobalCfg.ErrorWatchList[i];
if (errItem.eConfig == null)
{
continue;
}
TimeSpan interval = dateTime - errItem.ELog.start_time;
timeDiffMin = interval.Days * 24 + interval.Hours * 60 + interval.Minutes;
subject = "安灯系统" + errItem.ELog.error_name;
content = String.Format("{0}发生{1},已持续{2}分钟,已经超时！" + MessageAdditional, errItem.DeviceCode, subject, timeDiffMin);
if (errItem.eMsgedPersonList.Any(x => x.eLogPerson.message_level == (int)MessageLevel.Level1 &&
x.eLogPerson.message_flow == EventHandleFlowEnum.Event_Trigger.ToString()) == false)
{
errorMessageManager.SendErrorMessageAsync(errItem, (int)MessageLevel.Level1, EventHandleFlowEnum.Event_Trigger, subject, content);//一级人员通知，此处是补充通知，如果系统down机情况
}
if (timeDiffMin >= errItem.eConfig.timeout_setting)//大于超时时间
{
ratio = (timeDiffMin / errItem.eConfig.timeout_setting) + 1;
if (ratio > (int)MessageLevel.Level3)//最大级别限制
{
ratio = (int)MessageLevel.Level3;
}
if (ratio > (int)MessageLevel.Level1 && ratio <= (int)MessageLevel.Level3) //限定在2-3级
{
if (errItem.eCfgPersonList.Any(x => x.eCfgPerson.person_level == ratio)) //存在该级别的人员
{
if (errItem.eMsgedPersonList.Any(x => x.eLogPerson.message_level == ratio &&
x.eLogPerson.message_flow == EventHandleFlowEnum.Event_Timeout.ToString()) == false)
{
error_log logItem = errorLogManager.GetErrorLogById(errItem.ELog.id);
if (logItem != null)//检查数据库是否还存在
{
Console.WriteLine("error timeout level2,time= " + DateTime.Now.ToLongTimeString() + " " + errItem.DeviceCode + " " + errItem.eConfig.error_name);
errorMessageManager.SendErrorMessageAsync(errItem, ratio, EventHandleFlowEnum.Event_Timeout, subject, content);
}
else
{
AndonGlobalCfg.ErrorWatchList.RemoveAll(x => x.ELog.id == errItem.ELog.id);
}
}
}
}
}
}
}
catch (Exception ex)
{
srpLogManager.Insert("TimeoutWatch error:" + ex.Message);
}
}
/// <summary>
/// 异常判断与处理
/// </summary>
/// <param name="deviceTagValueItem">设备Tag值</param>
/// <param name="stationTagValueItem">站位Tag值</param>
private static void ErrorHandle(DeviceTagValueInfo deviceTagValueItem, TagAreaAttributeEnum tagAreaAttributeEnum, string DetailsInfo = "", int MaterialId = -1)
{
bool dbExist = false;
//根据类型检索是否已经存在
if (deviceTagValueItem.system_tag_code != SystemTagCodeEnum.machine_time_error.ToString()) //工时异常不查询数据库
{
if (MaterialId > 0) //物料呼叫有传入id则特殊处理
{
if (tagAreaAttributeEnum == TagAreaAttributeEnum.machine_info)
{
dbExist = errorLogManager.CheckMaterialRequireExist(deviceTagValueItem.system_tag_code, MaterialId, deviceTagValueItem.device_code);
}
else if (tagAreaAttributeEnum == TagAreaAttributeEnum.station_info)
{
dbExist = errorLogManager.CheckMaterialRequireExist(deviceTagValueItem.system_tag_code, MaterialId, "", deviceTagValueItem.device_id);
}
}
else
{
if (tagAreaAttributeEnum == TagAreaAttributeEnum.machine_info)
{
dbExist = errorLogManager.CheckExist(deviceTagValueItem.system_tag_code, deviceTagValueItem.device_code);
}
else if (tagAreaAttributeEnum == TagAreaAttributeEnum.station_info)
{
dbExist = errorLogManager.CheckExist(deviceTagValueItem.system_tag_code, "", deviceTagValueItem.device_id);
//list = ErrorWatchList.Where(x => x.ELog.station_id == deviceTagValueItem.device_id &&
// x.ELog.system_tag_code == deviceTagValueItem.system_tag_code).ToList();
}
}
}
//查找当前是否配置有关联的机种信息
ErrorObject errorObject = andonErrorManager.LoadErrorObject(deviceTagValueItem, tagAreaAttributeEnum);
//获取到配置，并不存在
if (errorObject != null && errorObject.eConfig != null &&
errorObject.eConfig.error_active == 1 && dbExist == false) //不存在,且激活，则新增
{
errorObject = andonErrorManager.AddNewErrorLog(deviceTagValueItem, errorObject, tagAreaAttributeEnum); //记录增加至数据库
if (errorObject != null && errorObject.eConfig != null)
{
if (errorObject.eConfig.check_ack > (int)AckModeEnum.NoAck) //只是记录，不需要确认，返回空对象
{
if (errorObject.eConfig.trigger_message_type > (int)ErrorMsgType.None) //异常发生时需要消息通知
{
string subject = "安灯系统" + deviceTagValueItem.system_code_name_cn + DetailsInfo;
string content = String.Format("{0}发生{1}，请相关人员尽快前往解决！" + MessageAdditional, deviceTagValueItem.device_code, subject);
errorMessageManager.SendErrorMessageAsync(errorObject, (int)MessageLevel.Level1, EventHandleFlowEnum.Event_Trigger, subject, content); //发送消息通知
}
if (errorObject.eConfig.trigger_out_color > (int)LightTowerEnum.None) //灯颜色输出.需要确认解除的才亮灯
{
//写值
lightTowerTagManager.WriteLightColorAsync(deviceTagValueItem.device_id, errorObject.eConfig.trigger_out_color, tagAreaAttributeEnum, 1);
lightTowerTagManager.GreenStatusLightOutAsync(deviceTagValueItem.device_id, tagAreaAttributeEnum);//绿灯状态切换
Console.WriteLine("error handle finish,time= " + DateTime.Now.ToLongTimeString() + " " + errorObject.DeviceCode + " " + errorObject.DeviceId + " " + errorObject.eConfig.system_tag_code);
}
}
}
}
}
/// <summary>
/// Tag标签值变化监测
/// </summary>
private static void TagValueWatch(TagAreaAttributeEnum tagAreaAttributeEnum)
{
DateTime dateTimeNow = DateTime.Now;
//Console.WriteLine("---------------start to scan MongoDb,time span =" + lastDatetime.ToString() + " --" + dateTimeNow.ToString()+",Dt now="+ DateTime.Now.ToLongTimeString());
List <DeviceTagValueInfo> vList = new List <DeviceTagValueInfo>();
List <error_config_person> eCfgPersons = new List <error_config_person>();
string subject = string.Empty, content = string.Empty;
int value = 0;
string machineCode;
int stationId;
string mErrCode = string.Empty;
List <MongoDbTag> Tags = new List <MongoDbTag>();
if (ScadaAPIConfig.EnableScadaApi == false)//本地版本
{
var filterBuilder1 = Builders <LocalMongoDbTag> .Filter;
var filter1 = filterBuilder1.And(filterBuilder1.Gt(x => x.ts, lastDatetime),
filterBuilder1.Lte(x => x.ts, dateTimeNow),
filterBuilder1.Ne(x => x.v, "*"),
filterBuilder1.Ne(x => x.v, ""));
var localTags = mongoDBHelper.GetList <LocalMongoDbTag>("HistoryRawDatas", filter1).OrderBy(x => x.ts).ToList();
if (localTags == null || localTags.Count == 0)
{
return;
}
//Console.WriteLine("success find MongoDb list=" + localTags.Count.ToString() +",time="+ DateTime.Now.ToLongTimeString());
foreach (var item in localTags)//分项合并
{
MongoDbTag tag = new MongoDbTag();
tag.ID = item.ID;
tag.t = string.Format("{0}:{1}:{2}", item.s, item.d, item.t);
tag.v = item.v;
tag.ts = item.ts;
Tags.Add(tag);
}
if (localTags.Count > 0)
{
lastDatetime = localTags[localTags.Count - 1].ts; //缓存上一次的时间，以最后一笔记录的时间为准
}
}
else
{
var filterBuilder = Builders <MongoDbTag> .Filter;
var filter = filterBuilder.And(filterBuilder.Gt(x => x.ts, lastDatetime),
filterBuilder.Lte(x => x.ts, dateTimeNow),
filterBuilder.Ne(x => x.v, "*"),
filterBuilder.Ne(x => x.v, ""));
Tags = mongoDBHelper.GetList <MongoDbTag>("scada_HistRawData", filter).OrderBy(x => x.ts).ToList();
//Console.WriteLine("---------------start to scan MongoDb,time span ="+ lastDatetime.ToString()+" --"+dateTimeNow.ToString());
if (Tags == null || Tags.Count == 0)
{
return;
}
//Console.WriteLine("AndonMainTask success find MongoDb list=" + Tags.Count.ToString() + ",time=" + DateTime.Now.ToLongTimeString());
if (Tags.Count > 0)
{
lastDatetime = Tags[Tags.Count - 1].ts; //缓存上一次的时间，以最后一笔记录的时间为准
}
}
Console.WriteLine("Mongodb combine finished,begin to find with postgre,time is " + DateTime.Now.ToLongTimeString() + " Tags count=" + Tags.Count.ToString());
try
{
vList = tagService.GetDeviceTagValueInfo(Tags, tagAreaAttributeEnum);
vList = vList.OrderBy(x => x.insert_time).ToList();
foreach (var valueItem in vList)
{
if (valueItem.tag_value == "" || valueItem.tag_value == "*")
{
continue;
}
if (tagAreaAttributeMode == TagAreaAttributeEnum.machine_info)
{
machineCode = valueItem.device_code;
stationId = -1;
}
else
{
machineCode = "";
stationId = valueItem.device_id;
}
if (valueItem.system_type_code == TagTypeEnum.Error.ToString()) //属于异常类型
{
if (valueItem.system_tag_code == SystemTagCodeEnum.material_require.ToString()) //物料呼叫信息标签
{
int requireCount = 0, materialId = 0;
//支持两种格式：数量，数量&物料id
TagIdAndValue valueObject = tagService.GetTagValue(valueItem.tag_value);
if (valueObject.id > 0 && valueObject.value.Length > 0)
{
requireCount = valueObject.id;
int.TryParse(valueObject.value, out materialId); //id为物料的id
//andonMaterialRequestManager.AddMaterialRequest(materialId, requireCount, valueItem, tagAreaAttributeMode);//增加
//传递的有物料数量和id，在异常里记录，监测时间 //
ErrorHandle(valueItem, tagAreaAttributeEnum, "", materialId);
}
else if (valueObject.id < 0 && valueObject.value.Length > 0)
{
int.TryParse(valueObject.value, out requireCount);
if (requireCount > 0)
{
ErrorHandle(valueItem, tagAreaAttributeEnum);//只传递的有数量，则记录，此方式为触摸屏HMI方式
}
}
}
else if (valueItem.system_tag_code == SystemTagCodeEnum.machine_error_code.ToString()) //采集到的异常编码
{
mErrCode = MachineErrorCodeHelper.MachineErrorCodeHandle(valueItem); //异常编码处理
if (mErrCode != string.Empty)
{
ErrorHandle(valueItem, tagAreaAttributeMode, mErrCode);
}
}
else//其他品质、设备、环膜等扩展异常
{
int.TryParse(valueItem.tag_value, out value);//值比较
if (value == 1)
{
ErrorHandle(valueItem, tagAreaAttributeEnum);
string msg = "error handle:" + DateTime.Now.AddHours(GlobalDefine.SysTimeZone).ToLongTimeString() + valueItem.device_code + " " + valueItem.device_id + " " + valueItem.tag_code + valueItem.system_type_code + " " + valueItem.system_tag_code + " " + valueItem.tag_value;
//srpLogManager.Insert(new srp_log(msg, DateTime.Now.AddHours(GlobalDefine.SysTimeZone)));
Console.WriteLine(msg);
}
}
}
else if (valueItem.system_type_code == TagTypeEnum.Other.ToString()) //其他类别
{
if (valueItem.system_tag_code == SystemTagCodeEnum.andon_ack_code.ToString()) //现场确认并提交错误编码sn
{
//支持两种格式，sn或者id&sn，id为异常记录的唯一标识号
HandleErrorAckForTag(machineCode, stationId, valueItem, tagAreaAttributeEnum);
}
else if (valueItem.system_tag_code == SystemTagCodeEnum.andon_ack_person.ToString())//签到人员的卡号
{
HandlePersonArrivalForTag(machineCode, stationId, valueItem, tagAreaAttributeEnum);
}
}
}
}
catch (Exception ex)
{
srpLogManager.Insert("Andon tagvalue错误:" + ex.Message);
}
try
{
//------------------------------------------------------------------------------------------------
//对设备层的编码特殊处理
//Console.WriteLine("start to find machine error code!");
if (tagAreaAttributeEnum != TagAreaAttributeEnum.machine_info)
{
//异常代码特殊处理，因为绑定在设备上面
vList = tagService.GetDeviceTagValueInfo(Tags, TagAreaAttributeEnum.machine_info);//异常代码特殊处理
vList = vList.Where(x => x.system_type_code == TagTypeEnum.Error.ToString() &&
x.system_tag_code == SystemTagCodeEnum.machine_error_code.ToString()).ToList();
foreach (var valueItem in vList)
{
mErrCode = MachineErrorCodeHelper.MachineErrorCodeHandle(valueItem);//异常编码处理
if (mErrCode != string.Empty)
{
ErrorHandle(valueItem, tagAreaAttributeMode, mErrCode);
}
}
}
//Console.WriteLine("machine error code handle finished!");
}
catch (Exception ex)
{
srpLogManager.Insert("抓取设备异常信息失败:" + ex.Message);
}
srpInnerLogManager.UpdateSrpTimeByCode(SrpCode, lastDatetime);//更新时间
Tags.Clear();
vList.Clear();
}
//private MaterialInfoManager materialInfoManager = new MaterialInfoManager();
/// <summary>
/// 物料呼叫增加
/// </summary>
/// <param name="materialID">物料id</param>
/// <param name="count">数量</param>
/// <param name="deviceTagValueInfo"></param>
/// <param name="tagAreaAttributeEnum"></param>
public void AddMaterialRequest(int materialID, int count, DeviceTagValueInfo deviceTagValueInfo, TagAreaAttributeEnum tagAreaAttributeEnum)
{
material_request_info request_Info = new material_request_info();
MachineInfo machine = null;
station_info station = null;
bool CheckOk = false;
CT ct = null;
//material_info material= materialInfoManager.SelectSingle(materialID);
if (tagAreaAttributeEnum == TagAreaAttributeEnum.machine_info)
{
machine = machineInfoManager.SelectSingle(deviceTagValueInfo.device_id);
if (machine != null)
{
var list = materialRequestInfoManager.SelectUnfinishedRequestInfo(materialID, machine.station_id);
if (list == null || list.Count == 0)
{
CheckOk = true;
request_Info.station_id = machine.station_id;
ct = ctManager.SelectSingle(machine.machine_code);
}
}
}
else if (tagAreaAttributeEnum == TagAreaAttributeEnum.station_info)
{
station = stationManager.SelectSingle(deviceTagValueInfo.device_id);
if (station != null)
{
var list = materialRequestInfoManager.SelectUnfinishedRequestInfo(materialID, station.station_id);
if (list == null || list.Count == 0)
{
CheckOk = true;
request_Info.station_id = station.station_id;
ct = ctManager.SelectSingle(station.station_id);
}
}
}
if (CheckOk)//队列不存在
{
request_Info.createtime = DateTime.Now.AddHours(GlobalDefine.SysTimeZone);
request_Info.request_count = count;
request_Info.material_id = materialID;
if (ct != null)
{
request_Info.part_num = ct.wo; //机种
request_Info.work_order = ct.pn; //工单
}
materialRequestInfoManager.Insert(request_Info);
}
}