public void Test_TAGFilePreScan_NEEposition()
{
// Lat/Long refers to the GPS_BASE_Position
// therefore SeedLatitude and SeedLongitude not available
// NE can be used along with the projects CSIB to resolve to a LL
var preScan = new TAGFilePreScan();
Assert.True(preScan.Execute(new FileStream(Path.Combine("TestData", "TAGFiles", "SeedPosition-usingNEE.tag"), FileMode.Open, FileAccess.Read)),
"Pre-scan execute returned false");
preScan.ProcessedEpochCount.Should().Be(1);
preScan.ReadResult.Should().Be(TAGReadResult.NoError);
preScan.SeedLatitude.Should().Be(null);
preScan.SeedLongitude.Should().Be(null);
preScan.SeedHeight.Should().Be(null);
preScan.SeedNorthing.Should().Be(5876814.5384829007);
preScan.SeedEasting.Should().Be(7562822.7801738745);
preScan.SeedElevation.Should().Be(127.31059507932183);
preScan.SeedTimeUTC.Should().Be(System.DateTime.Parse("2020-06-05T23:29:53.761", System.Globalization.NumberFormatInfo.InvariantInfo));
preScan.RadioType.Should().Be("torch");
preScan.RadioSerial.Should().Be("5850F00892");
preScan.MachineType.Should().Be(MachineType.Excavator);
preScan.MachineID.Should().Be("M316F PAK115");
preScan.HardwareID.Should().Be("1639J101YU");
preScan.DesignName.Should().Be("L03P");
preScan.ApplicationVersion.Should().Be("EW-1.11.0-2019_3 672");
}
/// <summary>
/// reads and validates tagFile, returning model for multi-use
/// </summary>
public static ContractExecutionResult PreScanTagFile(TagFileDetail tagDetail, out TAGFilePreScan tagFilePreScan)
{
tagFilePreScan = new TAGFilePreScan();
if (tagDetail.tagFileContent.Length <= minTagFileLength)
{
return(new ContractExecutionResult((int)TRexTagFileResultCode.TRexInvalidTagfile, TRexTagFileResultCode.TRexInvalidTagfile.ToString()));
}
using (var stream = new MemoryStream(tagDetail.tagFileContent))
tagFilePreScan.Execute(stream);
if (tagFilePreScan.ReadResult != TAGReadResult.NoError)
{
return(new ContractExecutionResult((int)TRexTagFileResultCode.TRexTagFileReaderError, tagFilePreScan.ReadResult.ToString()));
}
return(new ContractExecutionResult((int)TRexTagFileResultCode.Valid));
}
public async Task Test_PlatformSerialNoValidationOk()
{
// This test ensures platformSerialNumber (serial/deviceid) is extracted and used in validation. Note this Tagfile has no Radio Serial id. Only Serial id.
var projectUid = Guid.NewGuid();
var moqRequest = new GetProjectUidsRequest(projectUid.ToString(), string.Empty, 40, 50);
var moqResult = new GetProjectUidsResult(projectUid.ToString(), null, null, 0, "success");
SetupDITfa(true, moqRequest, moqResult);
byte[] tagContent;
using (var tagFileStream =
new FileStream(Path.Combine("TestData", "TAGFiles", "2415J078SW-Serial-Test.tag"), FileMode.Open, FileAccess.Read))
{
tagContent = new byte[tagFileStream.Length];
tagFileStream.Read(tagContent, 0, (int)tagFileStream.Length);
}
var td = new TagFileDetail()
{
assetId = null,
projectId = null, // force validation on serial id
tagFileName = "2415J078SW-Serial-Test.tag",
tagFileContent = tagContent,
tccOrgId = "",
IsJohnDoe = false
};
var tagFilePreScan = new TAGFilePreScan();
await using (var stream = new MemoryStream(td.tagFileContent))
tagFilePreScan.Execute(stream);
var result = await TagfileValidator.ValidSubmission(td, tagFilePreScan).ConfigureAwait(false);
Assert.True(result.Code == (int)TRexTagFileResultCode.Valid, "Failed to return a Valid request");
Assert.True(td.projectId != null, "Failed to return a Valid projectID");
Assert.Equal("success", result.Message);
}
public async Task DeviceLKS_CB460_SentOk()
{
var projectUid = Guid.NewGuid();
SetupDIDeviceGateay(true);
byte[] tagContent;
using (var tagFileStream =
new FileStream(Path.Combine("TestData", "TAGFiles", "TestTAGFile.tag"),
FileMode.Open, FileAccess.Read))
{
tagContent = new byte[tagFileStream.Length];
tagFileStream.Read(tagContent, 0, (int)tagFileStream.Length);
}
var td = new TagFileDetail()
{
assetId = null,
projectId = projectUid,
tagFileName = "Test.tag",
tagFileContent = tagContent,
tccOrgId = "",
IsJohnDoe = false
};
var tagFilePreScan = new TAGFilePreScan();
await using (var stream = new MemoryStream(td.tagFileContent))
tagFilePreScan.Execute(stream);
Assert.NotNull(tagFilePreScan);
Assert.Equal("0523J019SW", tagFilePreScan.HardwareID);
var executor = new SubmitTAGFileExecutor();
executor.SendDeviceStatusToDeviceGateway(td, tagFilePreScan);
}
public void Test_TAGFilePreScan_Execute_JapaneseDesign()
{
TAGFilePreScan preScan = new TAGFilePreScan();
Assert.True(preScan.Execute(new FileStream(Path.Combine("TestData", "TAGFiles", "JapaneseDesignTagfileTest.tag"), FileMode.Open, FileAccess.Read)),
"Pre-scan execute returned false");
preScan.ProcessedEpochCount.Should().Be(1222);
preScan.ReadResult.Should().Be(TAGReadResult.NoError);
preScan.SeedLatitude.Should().Be(0.65955923731934751);
preScan.SeedLongitude.Should().Be(2.45317108556434);
preScan.SeedHeight.Should().Be(159.53982475668218);
preScan.SeedNorthing.Should().Be(198863.25259713328);
preScan.SeedEasting.Should().Be(63668.71188769384);
preScan.SeedElevation.Should().Be(114.32995182440192);
preScan.SeedTimeUTC.Should().Be(System.DateTime.Parse("2019-06-17T01:43:14.8640000", System.Globalization.NumberFormatInfo.InvariantInfo));
preScan.RadioType.Should().Be("torch");
preScan.RadioSerial.Should().Be("5750F00368");
preScan.MachineType.Should().Be(25);
preScan.MachineID.Should().Be("320E03243");
preScan.HardwareID.Should().Be("3337J201SW");
preScan.DesignName.Should().Be("所沢地区 NO.210-NO.255");
preScan.ApplicationVersion.Should().Be("13.11-RC1");
}
public void Test_TAGFilePreScan_Execute()
{
TAGFilePreScan preScan = new TAGFilePreScan();
Assert.True(preScan.Execute(new FileStream(Path.Combine("TestData", "TAGFiles", "TestTAGFile.tag"), FileMode.Open, FileAccess.Read)),
"Pre-scan execute returned false");
preScan.ProcessedEpochCount.Should().Be(1478);
preScan.ReadResult.Should().Be(TAGReadResult.NoError);
preScan.SeedLatitude.Should().Be(0.8551829920414814);
preScan.SeedLongitude.Should().Be(-2.1377653549870974);
preScan.SeedHeight.Should().Be(25.045071376845993);
preScan.SeedNorthing.Should().Be(5427420.4410656113);
preScan.SeedEasting.Should().Be(537671.61978842877);
preScan.SeedElevation.Should().Be(41.549531624124079);
preScan.SeedTimeUTC.Should().Be(System.DateTime.Parse("2014-08-26T17:40:39.3550000", System.Globalization.NumberFormatInfo.InvariantInfo));
preScan.RadioType.Should().Be("torch");
preScan.RadioSerial.Should().Be("5411502448");
preScan.MachineType.Should().Be(39);
preScan.MachineID.Should().Be("CB54XW JLM00885");
preScan.HardwareID.Should().Be("0523J019SW");
preScan.DesignName.Should().Be("CAT DAY 22");
preScan.ApplicationVersion.Should().Be("12.61-75222");
}
public void Test_TAGFilePreScan_Execute_NoSeedLLH()
{
var preScan = new TAGFilePreScan();
Assert.True(preScan.Execute(new FileStream(Path.Combine("TestData", "TAGFiles", "TestTagFile_NoSeedLLHandNoUTM.tag"), FileMode.Open, FileAccess.Read)),
"Pre-scan execute returned false");
preScan.ProcessedEpochCount.Should().Be(272);
preScan.ReadResult.Should().Be(TAGReadResult.NoError);
preScan.SeedLatitude.Should().BeNull();
preScan.SeedLongitude.Should().BeNull();
preScan.SeedHeight.Should().BeNull();
preScan.SeedNorthing.Should().Be(121931.74737617122);
preScan.SeedEasting.Should().Be(564022.58097323333);
preScan.SeedElevation.Should().Be(398.75510795260766);
preScan.SeedTimeUTC.Should().Be(System.DateTime.Parse("2012-07-26T08:52:46.0350000", System.Globalization.NumberFormatInfo.InvariantInfo));
preScan.RadioType.Should().Be("torch");
preScan.RadioSerial.Should().Be("5123545219");
preScan.MachineType.Should().Be(25);
preScan.MachineID.Should().Be("B LHR934 S33251");
preScan.HardwareID.Should().Be("1112J010SW");
preScan.DesignName.Should().Be("Monthey Kontaktboden C2c6");
preScan.ApplicationVersion.Should().Be("12.20-53094");
}
public async Task Test_ValidateFailed_InvalidManualProjectType()
{
var projectUid = Guid.NewGuid();
var moqRequest = new GetProjectUidsRequest(projectUid.ToString(), string.Empty, 0, 0);
var moqResult = new GetProjectUidsResult(string.Empty, string.Empty, string.Empty, 3044, "Manual Import: cannot import to a Civil type project");
SetupDITfa(true, moqRequest, moqResult);
byte[] tagContent;
using (var tagFileStream =
new FileStream(Path.Combine("TestData", "TAGFiles", "TestTAGFile.tag"),
FileMode.Open, FileAccess.Read))
{
tagContent = new byte[tagFileStream.Length];
tagFileStream.Read(tagContent, 0, (int)tagFileStream.Length);
}
var td = new TagFileDetail()
{
assetId = null,
projectId = projectUid,
tagFileName = "Test.tag",
tagFileContent = tagContent,
tccOrgId = "",
IsJohnDoe = false
};
var tagFilePreScan = new TAGFilePreScan();
await using (var stream = new MemoryStream(td.tagFileContent))
tagFilePreScan.Execute(stream);
var result = await TagfileValidator.ValidSubmission(td, tagFilePreScan).ConfigureAwait(false);
Assert.True(result.Code == 3044, "Failed to return correct error code");
Assert.Equal("Manual Import: cannot import to a Civil type project", result.Message);
}
public async Task Test_UsingNEE_ValidateOk()
{
var projectUid = Guid.NewGuid();
var moqRequest = new GetProjectUidsRequest(projectUid.ToString(), "1639J101YU", 0, 0, 5876814.5384829007, 7562822.7801738745);
var moqResult = new GetProjectUidsResult(projectUid.ToString(), string.Empty, string.Empty, 0, "success");
SetupDITfa(true, moqRequest, moqResult);
byte[] tagContent;
using (var tagFileStream =
new FileStream(Path.Combine("TestData", "TAGFiles", "SeedPosition-usingNEE.tag"),
FileMode.Open, FileAccess.Read))
{
tagContent = new byte[tagFileStream.Length];
tagFileStream.Read(tagContent, 0, (int)tagFileStream.Length);
}
var td = new TagFileDetail()
{
assetId = null,
projectId = projectUid,
tagFileName = "Bug ccssscon-401 NEE SeedPosition.tag",
tagFileContent = tagContent,
tccOrgId = "",
IsJohnDoe = false
};
var tagFilePreScan = new TAGFilePreScan();
await using (var stream = new MemoryStream(td.tagFileContent))
tagFilePreScan.Execute(stream);
var result = await TagfileValidator.ValidSubmission(td, tagFilePreScan).ConfigureAwait(false);
Assert.True(result.Code == (int)TRexTagFileResultCode.Valid, "Failed to return a Valid request");
Assert.Equal("success", result.Message);
}
