public override void setExceptionValues(object s)
{
//base.setExceptionValues();
if (SystemMaterials.Count != 0)
{
SystemMaterial item = SystemMaterials.Where(x => x.Name == "LARGE CRACK REPAIR").FirstOrDefault();
if (item != null)
{
item.SMSqftH = item.Qty;
item.SMSqft = item.Qty;
//item.IsMaterialChecked = item.Qty>0?true:false;
item.Hours = CalculateHrs(item.SMSqftH, item.HorizontalProductionRate, item.StairSqft, item.StairsProductionRate);
item.LaborExtension = item.SetupMinCharge > item.Hours ? item.SetupMinCharge * laborRate : item.Hours * laborRate;
item.LaborUnitPrice = item.LaborExtension / (riserCount + totalSqft);
}
item = SystemMaterials.Where(x => x.Name == "BUBBLE REPAIR (MEASURE SQ FT)").FirstOrDefault();
if (item != null)
{
//item.IsMaterialChecked = item.Qty > 0 ? true : false;
item.SMSqftH = item.Qty;
item.SMSqft = item.Qty;
item.Hours = CalculateHrs(item.SMSqftH, item.HorizontalProductionRate, item.StairSqft, item.StairsProductionRate);
item.LaborExtension = item.SetupMinCharge > item.Hours ? item.SetupMinCharge * laborRate : item.Hours * laborRate;
item.LaborUnitPrice = item.LaborExtension / (riserCount + totalSqft);
}
}
}
public override void ApplyCheckUnchecks(object obj)
{
if (obj.ToString() == "Primer if needed: EC-11 primer")
{
SystemMaterials.Where(x => x.Name == "#30 or #60 Silica Sand (With Primer)").FirstOrDefault().IsMaterialChecked =
SystemMaterials.Where(x => x.Name == "Primer if needed: EC-11 primer").FirstOrDefault().IsMaterialChecked;
}
if (obj.ToString() == "Membrane Grey TC-1 Cement")
{
SystemMaterials.Where(x => x.Name == "Slurry Coat / Standard Semi-Smooth Texture: Grey TC-1 Cement").FirstOrDefault().IsMaterialChecked =
SystemMaterials.Where(x => x.Name == "Membrane Grey TC-1 Cement").FirstOrDefault().IsMaterialChecked;
}
if (obj.ToString() == "Grout Coat for Tile Pattern: Grey TC-5 Texture Cement")
{
SystemMaterials.Where(x => x.Name == "1/4 inch grout tape, Standard 12 x 12 tile pattern, tape and labor").FirstOrDefault().IsMaterialChecked =
SystemMaterials.Where(x => x.Name == "Grout Coat for Tile Pattern: Grey TC-5 Texture Cement").FirstOrDefault().IsMaterialChecked;
}
if (obj.ToString() == "SC-35 Water based stain" || obj.ToString() == "TC-40 Liquid Colorant" ||
obj.ToString() == "SC-70 clear acrylic lacquer")
{
bool sc35 = SystemMaterials.Where(x => x.Name == "SC-35 Water based stain").FirstOrDefault().IsMaterialChecked;
bool tc40 = SystemMaterials.Where(x => x.Name == "TC-40 Liquid Colorant").FirstOrDefault().IsMaterialChecked;
bool sc70 = SystemMaterials.Where(x => x.Name == "SC-70 clear acrylic lacquer").FirstOrDefault().IsMaterialChecked;
if (!sc35 && !tc40 && !sc70)
{
SystemMaterials.Where(x => x.Name == "SC-10 Topcoat").FirstOrDefault().IsMaterialChecked = true;
}
else
{
SystemMaterials.Where(x => x.Name == "SC-10 Topcoat").FirstOrDefault().IsMaterialChecked = false;
}
}
calculateRLqty();
//CalculateLaborMinCharge(false);
}
//calculateQTY for 9801 ACCELERATOR
public override void calculateRLqty()
{
if (SystemMaterials.Count == 0)
{
return;
}
double qty = 0;
foreach (var item in SystemMaterials)
{
if (item.Name == "7013 SC BASE COAT/ 5 GAL PAILS 30 MILS" ||
item.Name == "7016 - AR - SC INTERMEDIATE/ 5 GAL PAILS 20 MILS" ||
item.Name == "7016 SC TOP COAT/ 5 GAL PAILS 16 MILS" ||
item.Name == "SECOND INTERMEDIATE COAT FOR HIGH TRAFFIC")
{
if (item.IsMaterialChecked)
{
qty = qty + item.Qty;
}
}
}
SystemMaterial sysmat = SystemMaterials.Where(x => x.Name == "9801 ACCELERATOR").FirstOrDefault();
sysmat.Qty = sysmat.Coverage == 0?0: qty / sysmat.Coverage;
sysmat = SystemMaterials.Where(x => x.Name == "SLOPING FOR TREADS IF NOT PROVIDED FOR IN FRAMING (MOST CASES NEED SLOPE)").FirstOrDefault();
if (sysmat != null)
{
//double myVal = 0;
sysmat.SMUnits = riserCount.ToString();
//double.TryParse(sysmat.SMUnits,out myVal);
sysmat.Qty = sysmat.Coverage == 0?0: riserCount / sysmat.Coverage;
}
//CalculateLaborMinCharge(false);
}
public override void calculateRLqty()
{
SystemMaterial sysMat1, sysMat2;
if (SystemMaterials.Count > 0)
{
sysMat1 = SystemMaterials.Where(x => x.Name == "Slurry Coat for repairs").FirstOrDefault();
if (sysMat1 == null)
{
sysMat1 = SystemMaterials.Where(x => x.Name == "Slurry coat over texture (Krete Kote 120 sq ft per mix)").FirstOrDefault();
}
sysMat2 = SystemMaterials.Where(x => x.Name == "Texture for repairs").FirstOrDefault();
if (sysMat2 == null)
{
sysMat2 = SystemMaterials.Where(x => x.Name == "Krete Kote or Top Cote texture").FirstOrDefault();
}
bool ischecked = sysMat1.IsMaterialChecked;
sysMat1.Qty = sysMat1.Coverage == 0 ? 0 : sysMat1.SMSqft / sysMat1.Coverage;
sysMat1.IsMaterialChecked = ischecked;
ischecked = sysMat2.IsMaterialChecked;
sysMat2.Qty = sysMat2.Coverage == 0 ? 0 : sysMat2.SMSqft / sysMat2.Coverage;
sysMat2.IsMaterialChecked = ischecked;
}
//CalculateLaborMinCharge(false);
}
public override double CalculateLabrExtn(double calhrs, double setupMin, string matName)
{
if (matName == "Dustless grind")
{
SystemMaterial sysMat = SystemMaterials.Where(x => x.Name == matName).FirstOrDefault();
if (sysMat!=null)
{
sysMat.LaborUnitPrice = 0.25;
}
return totalSqft * 0.25;
}
else
{
if (calhrs == 0)
{
return 0;
}
else
return setupMin > calhrs ? setupMin * laborRate : calhrs * laborRate;
}
}
public override void setCheckBoxes()
{
//base.setCheckBoxes();
bool isSpecified = false;
if (IsJobSpecifiedByArchitect != null)
{
isSpecified = (bool)IsJobSpecifiedByArchitect;
}
SystemMaterial sysmat = SystemMaterials.Where(x => x.Name == "BASE COAT Desert Crete poly base mixed with water").FirstOrDefault();
sysmat.IsMaterialChecked = isSpecified;
sysmat.IsMaterialEnabled = isSpecified;
sysmat = SystemMaterials.Where(x => x.Name == "BASE COAT 50 lb Desert Crete Level Max 20/30").FirstOrDefault();
sysmat.IsMaterialChecked = !isSpecified;
sysmat.IsMaterialEnabled = !isSpecified;
foreach (SystemMaterial item in SystemMaterials)
{
if (item.Name == "2.5 Galvanized Lathe (18 s.f.)" || item.Name == "Staples")
{
item.IsMaterialChecked = getCheckboxCheckStatus(item.Name);
}
}
}
public override void ApplyCheckUnchecks(object obj)
{
bool isChecked;
if (obj.ToString() == "2.5 Galvanized Lathe")
{
isChecked = SystemMaterials.Where(x => x.Name == "2.5 Galvanized Lathe").FirstOrDefault().IsMaterialChecked;
SystemMaterials.Where(x => x.Name == "Staples").FirstOrDefault().IsMaterialChecked = isChecked;
prevStatus = isChecked;
}
if (obj.ToString() == "PD Resin (If dimension exceeds 20 ft in any direction or for below tile)")
{
isChecked = SystemMaterials.Where(x => x.Name == "PD Resin (If dimension exceeds 20 ft in any direction or for below tile)").FirstOrDefault().IsMaterialChecked;
SystemMaterials.Where(x => x.Name == "3/4 oz. Fiberglass").FirstOrDefault().IsMaterialChecked = isChecked;
}
if (obj.ToString() == "Select Y for protection coat over membrane below tile (GU80-1 TOP COAT)")
{
isChecked = SystemMaterials.Where(x => x.Name == "Select Y for protection coat over membrane below tile (GU80-1 TOP COAT)").FirstOrDefault().IsMaterialChecked;
SystemMaterials.Where(x => x.Name == "GU80-1 top coat texture coat semi-smooth or knockdown").FirstOrDefault().IsMaterialChecked = !isChecked;
SystemMaterials.Where(x => x.Name == "GS88 Sealer").FirstOrDefault().IsMaterialChecked = !isChecked;
SystemMaterials.Where(x => x.Name == "Color Jar Pigment, 1 JAR per PAIL OF GS88").FirstOrDefault().IsMaterialChecked = !isChecked;
}
calculateRLqty();
//CalculateLaborMinCharge(false);
}
//Calculate for "Add for Safe Grip Additive"
public override void calculateRLqty()
{
//base.calculateRLqty();
double val1=0, val2 = 0;
SystemMaterial sysmat = SystemMaterials.Where(x => x.Name == "SC-70 clear acrylic lacquer 200-300 sq ft per gallon").FirstOrDefault();
if (sysmat!=null)
{
val1 = sysmat.IsMaterialChecked ? sysmat.Qty : 0;
}
sysmat = SystemMaterials.Where(x => x.Name == "SC-10 solid color sealer IN LIEU of SC-70").FirstOrDefault();
if (sysmat != null)
{
val2 = sysmat.IsMaterialChecked ? sysmat.Qty : 0;
}
sysmat = SystemMaterials.Where(x => x.Name == "Add for Safe Grip Additive").FirstOrDefault();
if (sysmat!=null)
{
bool ischecked = sysmat.IsMaterialChecked;
sysmat.Qty = val1 + val2;
sysmat.IsMaterialChecked = ischecked;
}
//CalculateLaborMinCharge(false);
}
//calculate for Desert Crete
public override void calculateRLqty()
{
//base.calculateRLqty();
double val1 = 0, val2 = 0;
SystemMaterial sysmat = SystemMaterials.Where(x => x.Name == "BASE COAT 50 lb Desert Crete Level Max 20/30").FirstOrDefault();
if (sysmat != null)
{
val1 = sysmat.IsMaterialChecked ? sysmat.Qty : 0;
}
sysmat = SystemMaterials.Where(x => x.Name == "TEXTURE Desert Crete poly base texture mixed Polymer #550 (1-1/4GAL per BAG)").FirstOrDefault();
if (sysmat != null)
{
val2 = sysmat.IsMaterialChecked ? sysmat.Qty : 0;
}
sysmat = SystemMaterials.Where(x => x.Name == "Desert Crete Liquid Polymer #550 mixed 50/50 with water").FirstOrDefault();
if (sysmat != null)
{
double calVal = ((0.31 * val2) + val1 / 2.5 / 2);
if (IsJobSpecifiedByArchitect != null)
{
sysmat.Qty = (bool)IsJobSpecifiedByArchitect ? 0.31 * val2 : calVal;
}
}
//CalculateLaborMinCharge(false);
}
public override void setExceptionValues(object s)
{
if (SystemMaterials.Count != 0)
{
SystemMaterial item = SystemMaterials.Where(x => x.Name == "Plywood 3/4 & blocking (# of 4x8 sheets)").FirstOrDefault();
if (item != null)
{
item.SMSqftH = item.Qty * 32;
item.Hours = CalculateHrs(item.SMSqftH, item.HorizontalProductionRate, item.StairSqft, item.StairsProductionRate);
item.LaborExtension = item.SetupMinCharge > item.Hours ? item.SetupMinCharge * laborRate : item.Hours * laborRate;
item.LaborUnitPrice = item.LaborExtension / item.Qty;
}
item = SystemMaterials.Where(x => x.Name == "Stucco Material Remove and replace (LF)").FirstOrDefault();
if (item != null)
{
item.SMSqftH = item.Qty;
item.Hours = CalculateHrs(item.SMSqftH, item.HorizontalProductionRate, item.StairSqft, item.StairsProductionRate);
item.MaterialExtension = item.SpecialMaterialPricing == 0 ? item.Qty * item.MaterialPrice : item.Qty * item.SpecialMaterialPricing;
item.LaborExtension = item.SetupMinCharge > item.Hours ? item.SetupMinCharge * laborRate : item.Hours * laborRate;
item.LaborUnitPrice = item.LaborExtension / item.Qty;
}
}
calculateRLqty();
//CalculateLaborMinCharge(false);
}
public override void setExceptionValues(object s)
{
SystemMaterial item = SystemMaterials.Where(x => x.Name == "Plywood 3/4 & blocking (# of 4x8 sheets)").FirstOrDefault();
if (item != null)
{
item.SMSqftH = item.Qty * 32;
item.Hours = CalculateHrs(item.SMSqftH, item.HorizontalProductionRate, 0, 0);
item.LaborExtension = item.Hours == 0?0:item.Hours > item.SetupMinCharge ? item.Hours * laborRate : item.SetupMinCharge * laborRate;
item.LaborUnitPrice = item.LaborExtension / item.Qty;
}
item = SystemMaterials.Where(x => x.Name == "Stucco Material Remove and replace (LF)").FirstOrDefault();
if (item != null)
{
item.SMSqftH = item.Qty;
item.Hours = CalculateHrs(item.SMSqftH, item.HorizontalProductionRate, 0, 0);
item.LaborExtension = item.Hours == 0 ? 0 : item.Hours > item.SetupMinCharge ? item.Hours * laborRate : item.SetupMinCharge * laborRate;
item.LaborUnitPrice = item.LaborExtension / item.Qty;
}
item = SystemMaterials.Where(x => x.Name == "EXTRA STAIR NOSING").FirstOrDefault();
if (item != null)
{
item.StairSqft = item.Qty;
item.Hours = CalculateHrs(0, 0, item.StairSqft, item.StairsProductionRate);
item.LaborExtension = item.Hours == 0 ? 0 : item.Hours > item.SetupMinCharge ? item.Hours * laborRate : item.SetupMinCharge * laborRate;
item.LaborUnitPrice = (TotalSqftPlywood + totalSqft + riserCount) == 0?0:item.LaborExtension / (TotalSqftPlywood + totalSqft + riserCount);
}
}
//calculateQTY for 9801 ACCELERATOR
public override void calculateRLqty()
{
double qty = 0;
foreach (var item in SystemMaterials)
{
if (item.Name == "7013 SC BASE COAT/ 5 GAL PAILS 40 MILS" ||
item.Name == "7016 - AR - INTERMEDIATE COAT / 5 GAL PAILS 20 MILS" || item.Name == "7016 - AL - SC TOP COAT / 5 GAL PAILS 16 MILS")
{
if (item.IsMaterialChecked)
{
qty = qty + item.Qty;
}
}
}
SystemMaterial sysmat = SystemMaterials.Where(x => x.Name == "9801 ACCELERATOR").FirstOrDefault();
bool ischecked = sysmat.IsMaterialChecked;
sysmat.Qty = qty / sysmat.Coverage;
sysmat.IsMaterialChecked = ischecked;
sysmat = SystemMaterials.Where(x => x.Name == "SLOPING FOR TREADS IF NOT PROVIDED FOR IN FRAMING (MOST CASES NEED SLOPE)").FirstOrDefault();
if (sysmat != null)
{
ischecked = sysmat.IsMaterialChecked;
sysmat.SMUnits = riserCount.ToString();
//double.TryParse(sysmat.SMUnits, out myVal);
sysmat.Qty = riserCount / sysmat.Coverage;
sysmat.IsMaterialChecked = ischecked;
}
}
public override void calculateRLqty()
{
SystemMaterial sysMat1, sysMat2;
if (SystemMaterials.Count > 0)
{
sysMat1 = SystemMaterials.Where(x => x.Name == "Slurry Coat for repairs").FirstOrDefault();
if (sysMat1 == null)
{
sysMat1 = SystemMaterials.Where(x => x.Name == "Slurry coat over texture (Resistite smooth 120 sq ft per mix with 1 gal liquid)").FirstOrDefault();
}
sysMat2 = SystemMaterials.Where(x => x.Name == "Texture for repairs").FirstOrDefault();
if (sysMat2 == null)
{
sysMat2 = SystemMaterials.Where(x => x.Name == "Resistite textured knockdown finish (regular or smooth)").FirstOrDefault();
}
bool isChecked = sysMat1.IsMaterialChecked;
sysMat1.Qty = sysMat1.Coverage == 0 ? 0 : sysMat1.SMSqft / sysMat1.Coverage;
sysMat1.IsMaterialChecked = isChecked;
isChecked = sysMat2.IsMaterialChecked;
sysMat2.Qty = sysMat2.Coverage == 0 ? 0 : sysMat2.SMSqft / sysMat2.Coverage;
sysMat2.IsMaterialChecked = isChecked;
}
//CalculateLaborMinCharge(false);
}
//calculate for Desert Crete
public override void calculateRLqty()
{
double val1 = 0, val2 = 0;
SystemMaterial sysMat = SystemMaterials.Where(x => x.Name == "PARATERM BAR LF (TOP ONLY- STANDARD INSTALL)").FirstOrDefault();
if (sysMat != null)
{
val1 = sysMat.IsMaterialChecked ? sysMat.Qty : 0;
}
sysMat = SystemMaterials.Where(x => x.Name == "EXTRA PARATERM BAR LF (BOTTOM OR SIDES)").FirstOrDefault();
if (sysMat != null)
{
val2 = sysMat.IsMaterialChecked ? sysMat.Qty : 0;
}
sysMat = SystemMaterials.Where(x => x.Name == "PINS & LOADS").FirstOrDefault();
if (sysMat != null)
{
bool ischecked;
ischecked = sysMat.IsMaterialChecked;
sysMat.Qty = sysMat.SMSqft / sysMat.Coverage + (val1 + val2) / 2;
sysMat.IsMaterialChecked = ischecked;
}
sysMat = SystemMaterials.Where(x => x.Name == "PARASEAL LG ROLLS (4X24)").FirstOrDefault();
if (sysMat != null)
{
OtherItem olm = OtherMaterials.Where(x => x.Name == "Linear footage for seams if needed for submerged conditions")
.FirstOrDefault();
if (olm != null)
{
olm.Quantity = Math.Round(sysMat.Qty * 28, 2);
olm.LQuantity = Math.Round(sysMat.Qty * 28, 2);
}
}
}
public override void setExceptionValues(object s)
{
if (SystemMaterials.Count != 0)
{
SystemMaterial item = SystemMaterials.Where(x => x.Name == "UNIVERSAL OUTLET").FirstOrDefault();
if (item != null)
{
item.SMSqft = item.Qty;
item.Hours = CalculateHrs(item.SMSqftH, item.HorizontalProductionRate, item.StairSqft, item.StairsProductionRate);
item.LaborExtension = (item.Hours != 0) ? (item.SetupMinCharge + item.Hours) * laborRate : 0;
item.LaborUnitPrice = item.LaborExtension / (riserCount + totalSqft);
}
item = SystemMaterials.Where(x => x.Name == "TOTAL DRAIN 2' x 50' ( In lieu of rock & pipe) \"LINEAR FEET\"").FirstOrDefault();
if (item != null)
{
item.SMSqftH = item.Qty;
item.SMSqft = item.Qty;
item.Hours = CalculateHrs(item.SMSqftH, item.HorizontalProductionRate, item.StairSqft, item.StairsProductionRate);
item.LaborExtension = item.SetupMinCharge > item.Hours ? item.SetupMinCharge * laborRate : item.Hours * laborRate;
item.LaborUnitPrice = item.LaborExtension / item.Qty;
}
}
//CalculateLaborMinCharge(false);
}
public override void ApplyCheckUnchecks(object obj)
{
bool isChecked;
if (obj.ToString() == "ADD METAL LATHE AND STAPLES")
{
isChecked = SystemMaterials.Where(x => x.Name == "ADD METAL LATHE AND STAPLES").FirstOrDefault().IsMaterialChecked;
SystemMaterials.Where(x => x.Name == "Staples (3/4 Inch Crown, Box of 13,500)").FirstOrDefault().IsMaterialChecked = isChecked;
SystemMaterials.Where(x => x.Name == "SAND/CEMENT AND ACRYLIC UNDERLAY AT 1/2 INCH THICK").FirstOrDefault().IsMaterialChecked = isChecked;
if (isChecked)
{
SystemMaterials.Where(x => x.Name == "DETAIL TAPE (NEW PLYWOOD)").FirstOrDefault().IsMaterialChecked = !isChecked;
SystemMaterials.Where(x => x.Name == "VULKEM 116 SEALANT (10 OZ CARTRIDGE) 1").FirstOrDefault().IsMaterialChecked = !isChecked;
}
else
{
SystemMaterials.Where(x => x.Name == "DETAIL TAPE (NEW PLYWOOD)").FirstOrDefault().IsMaterialChecked = isNewPlywood;
SystemMaterials.Where(x => x.Name == "VULKEM 116 SEALANT (10 OZ CARTRIDGE) 1").FirstOrDefault().IsMaterialChecked = isNewPlywood;
}
}
calculateRLqty();
//CalculateLaborMinCharge(false);
}
public override void setCheckBoxes()
{
SystemMaterial sysmat = null;
sysmat = SystemMaterials.Where(x => x.Name == "PARAMASTIC (1000 LF PER PAIL FOR PREP & TERMINATIONS)").FirstOrDefault();
sysmat.IsMaterialChecked = !SystemMaterials.Where(x => x.Name == "**VULKEM 201 T CAN SOMETIMES BE USED IN LIEU OF PARAMASTIC ON LARGE JOBS. CHECK WITH MANUFACTURER").
FirstOrDefault().IsMaterialChecked;
}
private void setUnitChangeValues()
{
SystemMaterial item = SystemMaterials.Where(x => x.Name == "REPAIR AREAS (ENTER SQ FT OF FILL @ 1/4 INCH) UPI 7013 SC BASE COAT").FirstOrDefault();
if (item != null)
{
double unit = 0;
Double.TryParse(item.SMUnits, out unit);
item.SMSqft = unit;
item.SMSqftH = unit;
item.Qty = unit / item.Coverage;
item.Hours = CalculateHrs(item.SMSqftH, item.HorizontalProductionRate, item.StairSqft, item.StairsProductionRate);
item.LaborExtension = item.Hours == 0 ? 0 : item.Hours > item.SetupMinCharge ? item.Hours * laborRate : item.SetupMinCharge * laborRate;
item.LaborUnitPrice = item.LaborExtension / (riserCount + totalSqft + TotalSqftPlywood);
}
item = SystemMaterials.Where(x => x.Name == "Striping for small cracKs (less than 1/8\")").FirstOrDefault();
if (item != null)
{
double unit = 0;
Double.TryParse(item.SMUnits, out unit);
item.SMSqftH = unit;
item.SMSqft = unit;
item.Qty = unit / item.Coverage;
item.Hours = CalculateHrs(item.SMSqftH, item.HorizontalProductionRate, item.StairSqft, item.StairsProductionRate);
item.LaborExtension = item.Hours == 0 ? 0 : item.Hours > item.SetupMinCharge ? item.Hours * laborRate : item.SetupMinCharge * laborRate;
item.LaborUnitPrice = item.LaborExtension / (riserCount + totalSqft + TotalSqftPlywood);
}
item = SystemMaterials.Where(x => x.Name == "Route and caulk moving cracks (greater than 1/8\")").FirstOrDefault();
if (item != null)
{
double unit = 0;
Double.TryParse(item.SMUnits, out unit);
item.SMSqftH = unit;
item.SMSqft = unit;
item.Qty = unit / item.Coverage;
item.Hours = CalculateHrs(item.SMSqftH, item.HorizontalProductionRate, item.StairSqft, item.StairsProductionRate);
item.LaborExtension = item.Hours == 0 ? 0 : item.Hours > item.SetupMinCharge ? item.Hours * laborRate : item.SetupMinCharge * laborRate;
item.LaborUnitPrice = item.LaborExtension / (riserCount + totalSqft + TotalSqftPlywood);
}
item = SystemMaterials.Where(x => x.Name == "SECOND INTERMEDIATE COAT FOR HIGH TRAFFIC").FirstOrDefault();
if (item != null)
{
double unit = 0;
Double.TryParse(item.SMUnits, out unit);
item.SMSqftH = unit;
item.SMSqft = unit;
item.Qty = unit / item.Coverage;
item.Hours = CalculateHrs(item.SMSqftH, item.HorizontalProductionRate, item.StairSqft, item.StairsProductionRate);
item.LaborExtension = item.Hours == 0 ? 0 : item.Hours > item.SetupMinCharge ? item.Hours * laborRate : item.SetupMinCharge * laborRate;
item.LaborUnitPrice = item.LaborExtension / (riserCount + totalSqft + TotalSqftPlywood);
}
//calculateRLqty();
//CalculateLaborMinCharge(false);
}
public ParasealMaterialViewModel(Totals metalTotals, Totals slopeTotals, JobSetup Js) : base(metalTotals, slopeTotals, Js)
{
materialNames = new Dictionary <string, string>();
FillMaterialList();
FetchMaterialValuesAsync(false);
pinsCoverage = SystemMaterials.Where(x => x.Name == "PINS & LOADS").FirstOrDefault().Coverage;
}
public override void setExceptionValues(object s)
{
if (SystemMaterials.Count != 0)
{
SystemMaterial item = SystemMaterials.Where(x => x.Name == "UNIVERSAL OUTLET").FirstOrDefault();
if (item != null)
{
item.VerticalSqft = item.Qty;
item.Hours = CalculateHrs(item.SMSqftH, item.HorizontalProductionRate, item.StairSqft, item.StairsProductionRate, item.VerticalSqft, item.VerticalProductionRate);
item.LaborExtension = (item.Hours != 0) ? (item.SetupMinCharge + item.Hours) * laborRate : 0;
item.LaborUnitPrice = item.LaborExtension / (riserCount + totalSqft);
}
item = SystemMaterials.Where(x => x.Name == "TOTAL DRAIN MINUS BOTTOM TD 1000(IN LIEU OF ROCK & PIPE)").FirstOrDefault();
if (item != null)
{
item.VerticalSqft = item.Qty;
//item.SMSqft = item.Qty;
item.Hours = CalculateHrs(item.SMSqftH, item.HorizontalProductionRate, item.StairSqft, item.StairsProductionRate, item.VerticalSqft, item.VerticalProductionRate);
item.LaborExtension = item.Hours == 0?0:item.SetupMinCharge > item.Hours ? item.SetupMinCharge * laborRate : item.Hours * laborRate;
item.LaborUnitPrice = item.LaborExtension / item.Qty;
}
item = SystemMaterials.Where(x => x.Name == "Plywood 3/4 & blocking (# of 4x8 sheets)").FirstOrDefault();
if (item != null)
{
item.SMSqftH = item.Qty * 32;
//item.SMSqft = item.Qty;
item.Hours = CalculateHrs(item.SMSqftH, item.HorizontalProductionRate, item.StairSqft, item.StairsProductionRate);
item.LaborExtension = item.Hours == 0?0:item.SetupMinCharge > item.Hours ? item.SetupMinCharge * laborRate : item.Hours * laborRate;
item.LaborUnitPrice = item.LaborExtension / item.Qty;
}
item = SystemMaterials.Where(x => x.Name == "Stucco Material Remove and replace (LF)").FirstOrDefault();
if (item != null)
{
item.SMSqftH = item.Qty;
//item.SMSqft = item.Qty;
item.Hours = CalculateHrs(item.SMSqftH, item.HorizontalProductionRate, item.StairSqft, item.StairsProductionRate);
item.LaborExtension = item.Hours == 0?0:item.SetupMinCharge > item.Hours ? item.SetupMinCharge * laborRate : item.Hours * laborRate;
item.LaborUnitPrice = item.LaborExtension / item.Qty;
}
item = SystemMaterials.Where(x => x.Name == "PRIME AND ONE COAT OF VULKEM 801 ALUMINUM ROOF COATING @ WALL WITH SAND BROADCAST").FirstOrDefault();
if (item != null)
{
item.VerticalSqft = item.Qty;
item.SMSqft = item.Qty * 0.5;
item.Hours = CalculateHrs(item.SMSqftH, item.HorizontalProductionRate, item.StairSqft, item.StairsProductionRate, item.VerticalSqft, item.VerticalProductionRate);
item.LaborExtension = item.Hours == 0 ? 0 : item.SetupMinCharge > item.Hours ? item.SetupMinCharge * laborRate : item.Hours * laborRate;
item.LaborUnitPrice = item.LaborExtension / item.Qty;
}
}
//CalculateLaborMinCharge(false);
}
public override void setExceptionValues(object s)
{
if (SystemMaterials.Count != 0)
{
SystemMaterial item = SystemMaterials.Where(x => x.Name == "Plywood 3/4 & blocking (# of 4x8 sheets)").FirstOrDefault();
if (item != null)
{
item.SMSqftH = item.Qty * 32;
item.Hours = CalculateHrs(item.SMSqftH, item.HorizontalProductionRate, item.StairSqft, item.StairsProductionRate);
item.LaborExtension = item.SetupMinCharge > item.Hours ? item.SetupMinCharge * laborRate : item.Hours * laborRate;
item.LaborUnitPrice = item.LaborExtension / item.Qty;
}
item = SystemMaterials.Where(x => x.Name == "Stucco Material Remove and replace (LF)").FirstOrDefault();
if (item != null)
{
item.SMSqftH = item.Qty;
item.Hours = CalculateHrs(item.SMSqftH, item.HorizontalProductionRate, item.StairSqft, item.StairsProductionRate);
item.MaterialExtension = item.SpecialMaterialPricing == 0 ? item.Qty * item.MaterialPrice : item.Qty * item.SpecialMaterialPricing;
item.LaborExtension = item.SetupMinCharge > item.Hours ? item.SetupMinCharge * laborRate : item.Hours * laborRate;
item.LaborUnitPrice = item.LaborExtension / item.Qty;
}
item = SystemMaterials.Where(x => x.Name == "ENTER # OF DECKS TO WATER TEST \"NO DAM'S NEEDED\"").FirstOrDefault();
if (item != null)
{
item.SMSqftH = item.Qty;
item.Hours = CalculateHrs(item.SMSqftH, item.HorizontalProductionRate, item.StairSqft, item.StairsProductionRate);
item.MaterialExtension = item.SpecialMaterialPricing == 0 ? item.Qty * item.MaterialPrice : item.Qty * item.SpecialMaterialPricing;
item.LaborExtension = item.SetupMinCharge > item.Hours ? item.SetupMinCharge * laborRate : item.Hours * laborRate;
item.LaborUnitPrice = item.LaborExtension / item.Qty;
}
item = SystemMaterials.Where(x => x.Name == "ADD LF FOR DAMMING @ DRIP EDGE").FirstOrDefault();
if (item != null)
{
item.SMSqftH = item.Qty;
item.Hours = CalculateHrs(item.SMSqftH, item.HorizontalProductionRate, item.StairSqft, item.StairsProductionRate);
item.MaterialExtension = item.SpecialMaterialPricing == 0 ? item.Qty * item.MaterialPrice : item.Qty * item.SpecialMaterialPricing;
item.LaborExtension = item.SetupMinCharge > item.Hours ? item.SetupMinCharge * laborRate : item.Hours * laborRate;
item.LaborUnitPrice = item.LaborExtension / item.Qty;
}
item = SystemMaterials.Where(x => x.Name == "2 COATS VULKEM 350R/951 @ WALL (LF DECK TO WALL)").FirstOrDefault();
if (item != null)
{
item.SMSqft = item.Qty * 0.5;
item.SMSqftV = item.Qty;
item.Hours = CalculateHrs(item.SMSqftH, item.HorizontalProductionRate, item.StairSqft, item.StairsProductionRate, item.SMSqftV, item.VerticalProductionRate);
item.MaterialExtension = item.SpecialMaterialPricing == 0 ? item.Qty * item.MaterialPrice : item.Qty * item.SpecialMaterialPricing;
item.LaborExtension = item.SetupMinCharge > item.Hours ? item.SetupMinCharge * laborRate : item.Hours * laborRate;
item.LaborUnitPrice = item.LaborExtension / item.Qty;
}
}
// CalculateLaborMinCharge(false);
}
public override void setExceptionValues(object s)
{
if (SystemMaterials.Count != 0)
{
SystemMaterial item = SystemMaterials.Where(x => x.Name == "MIRADRAIN HC 1\" DRAIN - PUNCHED 12\" X 100' (QUICK DRAIN)").FirstOrDefault();
if (item != null)
{
item.SMSqftV = item.Qty;
item.Hours = CalculateHrs(item.SMSqftH, item.HorizontalProductionRate, item.StairSqft, item.StairsProductionRate, item.SMSqftV, item.VerticalProductionRate);
item.LaborExtension = item.Hours == 0 ?0: item.SetupMinCharge > item.Hours ? item.SetupMinCharge * laborRate : item.Hours * laborRate;
item.LaborUnitPrice = item.LaborExtension / item.Qty;
}
item = SystemMaterials.Where(x => x.Name == "TERM BAR").FirstOrDefault();
if (item != null)
{
item.SMSqftV = item.Qty;
item.Hours = CalculateHrs(item.SMSqftH, item.HorizontalProductionRate, item.StairSqft, item.StairsProductionRate, item.SMSqftV, item.VerticalProductionRate);
item.LaborExtension = item.Hours == 0 ? 0 : item.SetupMinCharge > item.Hours ? item.SetupMinCharge * laborRate : item.Hours * laborRate;
item.LaborUnitPrice = item.LaborExtension / item.Qty;
}
item = SystemMaterials.Where(x => x.Name == "WATERSTOP (MIRASTOP)").FirstOrDefault();
if (item != null)
{
item.SMSqftV = item.Qty;
item.Hours = CalculateHrs(item.SMSqftH, item.HorizontalProductionRate, item.StairSqft, item.StairsProductionRate, item.SMSqftV, item.VerticalProductionRate);
item.LaborExtension = item.Hours == 0 ? 0 : item.SetupMinCharge > item.Hours ? item.SetupMinCharge * laborRate : item.Hours * laborRate;
item.LaborUnitPrice = item.LaborExtension / item.Qty;
}
item = SystemMaterials.Where(x => x.Name == "Plywood 3/4 & blocking (# of 4x8 sheets)").FirstOrDefault();
if (item != null)
{
item.SMSqftH = item.Qty * 32;
item.Hours = CalculateHrs(item.SMSqftH, item.HorizontalProductionRate, item.StairSqft, item.StairsProductionRate);
item.LaborExtension = item.Hours == 0 ? 0 : item.SetupMinCharge > item.Hours ? item.SetupMinCharge * laborRate : item.Hours * laborRate;
item.LaborUnitPrice = item.LaborExtension / item.Qty / 32;
}
item = SystemMaterials.Where(x => x.Name == "Stucco Material Remove and replace (LF)").FirstOrDefault();
if (item != null)
{
item.SMSqftH = item.Qty;
item.Hours = CalculateHrs(item.SMSqftH, item.HorizontalProductionRate, item.StairSqft, item.StairsProductionRate);
item.LaborExtension = item.Hours == 0 ? 0 : item.SetupMinCharge > item.Hours ? item.SetupMinCharge * laborRate : item.Hours * laborRate;
item.LaborUnitPrice = item.LaborExtension / item.Qty;
}
}
//CalculateLaborMinCharge(false);
}
public override void ApplyCheckUnchecks(object obj)
{
SystemMaterial sysmat = null;
if (obj.ToString() == "**VULKEM 201 T CAN SOMETIMES BE USED IN LIEU OF PARAMASTIC ON LARGE JOBS. CHECK WITH MANUFACTURER")
{
sysmat = SystemMaterials.Where(x => x.Name == "PARAMASTIC (1000 LF PER PAIL FOR PREP & TERMINATIONS)").FirstOrDefault();
sysmat.IsMaterialChecked = !SystemMaterials.Where(x => x.Name == "**VULKEM 201 T CAN SOMETIMES BE USED IN LIEU OF PARAMASTIC ON LARGE JOBS. CHECK WITH MANUFACTURER").
FirstOrDefault().IsMaterialChecked;
}
//if (obj.ToString() == "PB-4 (VERTICAL ONLY)")
//{
// sysmat = SystemMaterials.Where(x => x.Name == "PROTECTION MAT (HORIZONTAL ONLY)").FirstOrDefault();
// sysmat.IsMaterialEnabled = true;
// sysmat.IsMaterialChecked = false;
// sysmat = SystemMaterials.Where(x => x.Name == "TREMDRAIN 1000 (VERTICAL ONLY)").FirstOrDefault();
// sysmat.IsMaterialEnabled = true;
// sysmat.IsMaterialChecked = false;
// sysmat = SystemMaterials.Where(x => x.Name == "TREMDRAIN 1000 (HORIZONTAL ONLY)").FirstOrDefault();
// sysmat.IsMaterialEnabled = true;
// sysmat.IsMaterialChecked = false;
//}
//if (obj.ToString() == "TREMDRAIN 1000 (VERTICAL ONLY)")
//{
// sysmat = SystemMaterials.Where(x => x.Name == "PROTECTION MAT (HORIZONTAL ONLY)").FirstOrDefault();
// sysmat.IsMaterialEnabled = true;
// sysmat.IsMaterialChecked = false;
// sysmat = SystemMaterials.Where(x => x.Name == "PB-4 (VERTICAL ONLY)").FirstOrDefault();
// sysmat.IsMaterialEnabled = true;
// sysmat.IsMaterialChecked = false;
// sysmat = SystemMaterials.Where(x => x.Name == "TREMDRAIN 1000 (HORIZONTAL ONLY)").FirstOrDefault();
// sysmat.IsMaterialEnabled = true;
// sysmat.IsMaterialChecked = false;
//}
//if (obj.ToString() == "TREMDRAIN 1000 (HORIZONTAL ONLY)")
//{
// sysmat = SystemMaterials.Where(x => x.Name == "PROTECTION MAT (HORIZONTAL ONLY)").FirstOrDefault();
// sysmat.IsMaterialEnabled = true;
// sysmat.IsMaterialChecked = false;
// sysmat = SystemMaterials.Where(x => x.Name == "PB-4 (VERTICAL ONLY)").FirstOrDefault();
// sysmat.IsMaterialEnabled = true;
// sysmat.IsMaterialChecked = false;
// sysmat = SystemMaterials.Where(x => x.Name == "TREMDRAIN 1000 (VERTICAL ONLY)").FirstOrDefault();
// sysmat.IsMaterialEnabled = true;
// sysmat.IsMaterialChecked = false;
//}
calculateRLqty();
//CalculateLaborMinCharge(false);
}
public override void ApplyCheckUnchecks(object obj)
{
if (obj.ToString() == "2.5 Galvanized Lathe (18 s.f.)")
{
bool isChecked = SystemMaterials.Where(x => x.Name == "2.5 Galvanized Lathe (18 s.f.)").FirstOrDefault().IsMaterialChecked;
SystemMaterials.Where(x => x.Name == "Staples").FirstOrDefault().IsMaterialChecked = isChecked;
}
calculateRLqty();
//CalculateLaborMinCharge(false);
}
public override void ApplyCheckUnchecks(object obj)
{
if (obj.ToString() == "Vista Paint Acripoxy (TOPCOAT)")
{
bool ischecked = SystemMaterials.Where(x => x.Name == "Vista Paint Acripoxy (TOPCOAT)").FirstOrDefault().IsMaterialChecked;
SystemMaterials.Where(x => x.Name == "Dexcelent II Final Coat (TOPCOAT)").FirstOrDefault().IsMaterialChecked = !ischecked;
}
//CalculateLaborMinCharge(false);
//CalculateAllMaterial();
}
public override void setExceptionValues(object s)
{
bool isExceptionValueSet = false;
if (SystemMaterials.Count != 0)
{
SystemMaterial item = SystemMaterials.Where(x => x.Name == "ENTER # OF DECKS TO WATER TEST \"NO DAM'S NEEDED\"").FirstOrDefault();
if (item != null)
{
item.SMSqftH = hasElastatex ? item.Qty * 2:item.Qty;
item.Hours = CalculateHrs(item.SMSqftH, item.HorizontalProductionRate, item.StairSqft, item.StairsProductionRate, item.SMSqftV, item.VerticalProductionRate);
item.LaborExtension = item.SetupMinCharge > item.Hours ? item.SetupMinCharge * laborRate : item.Hours * laborRate;
item.LaborUnitPrice = item.LaborExtension / item.Qty;
isExceptionValueSet = true;
}
item = SystemMaterials.Where(x => x.Name == "ADD LF FOR DAMMING @ DRIP EDGE").FirstOrDefault();
if (item != null)
{
item.SMSqftH = item.Qty;
item.Hours = CalculateHrs(item.SMSqftH, item.HorizontalProductionRate, item.StairSqft, item.StairsProductionRate, item.SMSqftV, item.VerticalProductionRate);
item.LaborExtension = item.SetupMinCharge > item.Hours ? item.SetupMinCharge * laborRate : item.Hours * laborRate;
item.LaborUnitPrice = item.LaborExtension / item.Qty;
isExceptionValueSet = true;
}
item = SystemMaterials.Where(x => x.Name == "Plywood 3/4 & blocking (# of 4x8 sheets)").FirstOrDefault();
if (item != null)
{
item.SMSqftH = item.Qty * 32;
item.Hours = CalculateHrs(item.SMSqftH, item.HorizontalProductionRate, item.StairSqft, item.StairsProductionRate);
item.LaborExtension = item.Hours == 0 ? 0 : item.SetupMinCharge > item.Hours ? item.SetupMinCharge * laborRate : item.Hours * laborRate;
item.LaborUnitPrice = item.LaborExtension / item.Qty / 32;
isExceptionValueSet = true;
}
item = SystemMaterials.Where(x => x.Name == "Stucco Material Remove and replace (LF)").FirstOrDefault();
if (item != null)
{
item.SMSqftH = item.Qty;
item.Hours = CalculateHrs(item.SMSqftH, item.HorizontalProductionRate, item.StairSqft, item.StairsProductionRate);
item.LaborExtension = item.Hours == 0 ? 0 : item.SetupMinCharge > item.Hours ? item.SetupMinCharge * laborRate : item.Hours * laborRate;
item.LaborUnitPrice = item.LaborExtension / item.Qty;
isExceptionValueSet = true;
}
//if (isExceptionValueSet ==true)
//CalculateLaborMinCharge(false);
}
}
private void getEKLQnty()
{
SystemMaterial sysMat = SystemMaterials.Where(x => x.Name == "Add for Gamma Cure in lieu of wet cure").FirstOrDefault();
if (sysMat != null)
{
sysMat.Hours = sysMat.IsMaterialChecked ? (linearCoping + totalVerticalSqft) * 0.2 / 25:0;
sysMat.LaborExtension = sysMat.Hours == 0 ? 0 : sysMat.Hours > sysMat.SetupMinCharge ? sysMat.Hours * laborRate : sysMat.SetupMinCharge * laborRate;
sysMat.LaborUnitPrice = (totalSqft + totalVerticalSqft + riserCount) == 0 ? 0:sysMat.LaborExtension / (totalSqft + totalVerticalSqft + riserCount);
}
}
public override void setCheckBoxes()
{
SystemMaterials.Where(x => x.Name == "SLURRY COAT (RESISTITE) OVER TEXTURE").First().IsMaterialChecked = false;
SystemMaterials.Where(x => x.Name == "RESISTITE LIQUID").First().IsMaterialEnabled = true;
SystemMaterials.Where(x => x.Name == "RESISTITE LIQUID").First().IsMaterialChecked = false;
SystemMaterials.Where(x => x.Name == "RESISTITE LIQUID").First().IsMaterialEnabled = false;
SystemMaterials.Where(x => x.Name == "RESISTITE REGULAR OR SMOOTH GRAY (KNOCK DOWN OR SMOOTH)").First().IsMaterialChecked = false;
SystemMaterials.Where(x => x.Name == "RESISTITE REGULAR GRAY").First().IsMaterialChecked = false;
SystemMaterials.Where(x => x.Name == "DEXOTEX AJ-44").First().IsMaterialChecked = false;
SystemMaterials.Where(x => x.Name == "WESTCOAT SC-10").First().IsMaterialChecked = false;
SystemMaterials.Where(x => x.Name == "UPI PERMASHIELD").First().IsMaterialChecked = false;
SystemMaterials.Where(x => x.Name == "PLI DEK GS88 WITH COLOR JAR 1 PER PAIL").First().IsMaterialChecked = false;
}
public override void ApplyCheckUnchecks(object obj)
{
if (obj.ToString() == "Slurry Coat for repairs" || obj.ToString() == "Slurry coat over texture (Krete Kote 120 sq ft per mix)")
{
SystemMaterial sysMat1 = SystemMaterials.Where(x => x.Name == "Slurry Coat for repairs").FirstOrDefault();
if (sysMat1 == null)
{
sysMat1 = SystemMaterials.Where(x => x.Name == "Slurry coat over texture (Krete Kote 120 sq ft per mix)").FirstOrDefault();
}
SystemMaterials.Where(x => x.Name == "Light crack and repairs- speed bond (no more than 1% of area)").FirstOrDefault().IsMaterialChecked = !sysMat1.IsMaterialChecked;
}
calculateRLqty();
}
public override void ApplyCheckUnchecks(object obj)
{
if (obj.ToString() == "Slurry Coat for repairs" || obj.ToString() == "Slurry coat over texture (Resistite smooth 120 sq ft per mix with 1 gal liquid)")
{
SystemMaterial sysMat1 = SystemMaterials.Where(x => x.Name == "Slurry Coat for repairs").FirstOrDefault();
if (sysMat1 == null)
{
sysMat1 = SystemMaterials.Where(x => x.Name == "Slurry coat over texture (Resistite smooth 120 sq ft per mix with 1 gal liquid)").FirstOrDefault();
}
SystemMaterials.Where(x => x.Name == "Light crack and repairs- resistite smooth (no more than 5% of area) with 1 gal liquid").FirstOrDefault().IsMaterialChecked = !sysMat1.IsMaterialChecked;
}
calculateRLqty();
}