public void Listener()
{
string str = "";
System.IO.Ports.SerialPort spListner = new System.IO.Ports.SerialPort();
spListner.PortName = "COM5";
spListner.BaudRate = 9600;
spListner.Open();
while (spListner.BytesToRead > 0)
{
str = spListner.ReadLine();
textBox1.AppendText(str);
}
}
public void SetMode(int TransferMode)
{
transferMode = TransferMode;
if (isConnected)
{
StopCommunication();
}
if (transferMode == Constants.TransferMode.USB)
{
int test = GetUsbDeviceComport("Ba-Robot");
comport = test;
if (comport != 0)
{
isValidTransferMode = true;
serialPort = new System.IO.Ports.SerialPort("COM" + comport.ToString(), baudrate);
}
}
else if (transferMode == Constants.TransferMode.COM)
{
isValidTransferMode = false;
comport = 0;
}
else
{
isValidTransferMode = false;
transferMode = Constants.TransferMode.COM;
comport = -1;
serialPort = new System.IO.Ports.SerialPort();
}
}
private void TryOpenPort()
{
if (_port == null)
{
_port = new System.IO.Ports.SerialPort();
}
else if (_port.IsOpen)
{
return;
}
_port.PortName = _portName;
_port.BaudRate = _portSpeed;
_port.ReadTimeout = 1000;
_port.ReadBufferSize = 100;
try
{
_port.Open();
}
catch (Exception ex)
{
#region debug
debugger.WriteLine(Debugger.DebugLevel.DebugDevice, "TryOpenPort: Cannot open \"{0}\", ex: {1}",
_portName, ex.Message);
#endregion
throw;
}
}
/// <summary>
/// 按照默认波特率打开串口
/// </summary>
private void CreateOpenPort(string _baudRate)
{
int rate = int.Parse(_baudRate);
// 默认：9600，无校验， 8数据位，1停止位
if (CompassModulePort == null)
{
CompassModulePort = new System.IO.Ports.SerialPort(PortName,
rate, System.IO.Ports.Parity.None, 8, System.IO.Ports.StopBits.One);
}
// 重新创建新的串口
else if (PortName != CompassModulePort.PortName)
{
CompassModulePort.Close();
CompassModulePort.Dispose();
CompassModulePort = new System.IO.Ports.SerialPort(PortName,
rate, System.IO.Ports.Parity.None, 8, System.IO.Ports.StopBits.One);
}
// 重新设置波特率
else if (CompassModulePort.BaudRate != rate)
{
// 需要重新打开。
CompassModulePort.Close();
CompassModulePort.BaudRate = rate;
}
if (CompassModulePort.IsOpen == false)
{
CompassModulePort.ReadTimeout = 1000;
CompassModulePort.Open();
}
}
public GPS(string strPortName, int baudRate)
{
Data = new GPSData();
Port = new System.IO.Ports.SerialPort(strPortName, baudRate);
Port.DataReceived += new System.IO.Ports.SerialDataReceivedEventHandler(SerialDataReceived);
}
/// <summary>
/// 尝试连接
/// </summary>
/// <returns></returns>
public bool Connect()
{
if (connected)
{
return(true);
}
serialPort = new System.IO.Ports.SerialPort(portName);
try
{
serialPort.BaudRate = 38400;
serialPort.Open();
serialPort.DataReceived += SerialPort_DataReceived;
connected = true;
LastReciveTransID = 0;
LastSendTransID = 0;
}
catch (Exception ex)
{
if (serialPort.IsOpen)
{
serialPort.Close();
}
connected = false;
throw ex;
}
return(connected);
}
//======================================================================
//函数名称：frm_uart_Load
//函数返回：无
//参数说明：无
//功能概要：窗体加载事件，窗体加载时自动调用
//======================================================================
private void frm_uart_Load(object sender, EventArgs e)
{
//（1）变量申明
string com;
//（1）设置允许跨线程操作UI控件
System.Windows.Forms.Control.CheckForIllegalCrossThreadCalls = false;
//（2）获得主页面窗体
fmain = (frm_main)this.MdiParent;
//（3）更新状态提示信息
fmain.lbl_status.Text = "运行状态：frm_uart_Load函数开始，寻找终端节点...";
//（4）调用pcNode类中的函数，寻找下位机，并更新设备连接状态信息
if (uart != null && uart.IsOpen)
{
uart.close();
}
com = pcNode.findPCNode();
uart = pcNode.PCNode_Uart;
fmain.lbl_status.Text = "运行状态：找到" + com;
lbl_uart_state.Text = com;
//（5）绑定DataReceived事件(即串口接收中断处理函数）
if (uart != null)
{
uartPort = uart.port;
uartPort.DataReceived += new System.IO.Ports.SerialDataReceivedEventHandler(this.uartPort_recvData);
uart.setReceInt(500); //相当于关闭串口中断
this.btn_autoUpdate.Enabled = true;
}
//（6）修改其他提示信息
fmain.lbl_protocal.Text = "协议：串口";
fmain.lbl_protocalinfo.Text = "协议信息：端口" + com + ",波特率9600";
}
public void RefreshPorts()
{
var foundPorts = new List <System.IO.Ports.SerialPort> ();
var bauds = new [] { 4800, 9600, 19200, 38400, 57600, 115200, 230400 };
var names = System.IO.Ports.SerialPort.GetPortNames();
foreach (var name in names)
{
var port = new System.IO.Ports.SerialPort(name);
foreach (var rate in bauds)
{
var expectedString = "AS5048B";
var expectedBuffer = expectedString.ToCharArray();
var actualBuffer = new char[expectedString.Length];
port.BaudRate = rate;
var read = port.Read(actualBuffer, 0, buffer.Length);
if (read == 7)
{
try {
var actualString = new string (actualBuffer);
if (actualString.Equals(expectedString))
{
foundPorts.Add(port);
}
} catch {
}
}
}
}
}
private void Button_PPMS_Serial_Connect_Click(object sender, RoutedEventArgs e)
{
try
{
myparts.myDialog dlg = new myparts.myDialog("シリアルポートに接続します");
if (dlg.ShowDialog() != true)
{
return;
}
this.serialport = new System.IO.Ports.SerialPort("COM" + this.TextBox_PPMS_COMPORT.Text, int.Parse(this.TextBox_PPMS_BaudRate.Text), System.IO.Ports.Parity.None, 8, System.IO.Ports.StopBits.One);
this.serialport.Encoding = Encoding.ASCII;
byte[] endsign = { 170, 255 };
this.serialport.NewLine = Encoding.ASCII.GetString(endsign, 0, 1);
this.serialport.Open();
this.fps = new FPSAdjuster.FPSAdjuster();
fps.Fps = int.Parse(this.TextBox_PPMS_FPS.Text);
fps.Start();
this.CTS = new CancellationTokenSource();
this.maintask = new Task(new Action(this.MainTask_PPMS), this.CTS.Token);
this.maintask.Start();
}
catch (Exception ex)
{
myparts.myDialog dlg = new myparts.myDialog(ex.Message);
dlg.ShowDialog();
}
}
// Serial port event handler for a nice event-driven architecture
private void DataReceivedHandler(
object sender,
System.IO.Ports.SerialDataReceivedEventArgs e)
{
System.IO.Ports.SerialPort sp = (System.IO.Ports.SerialPort)sender;
Byte[] inData = new Byte[sp.BytesToRead];
// read all available bytes from serial port in one chunk
sp.Read(inData, 0, sp.BytesToRead);
// DEBUG: display bytes read
//ThreadSafeDelegate(delegate { txtLog.AppendText(String.Format("<= RX ({0}) [ {1}]", inData.Length, ByteArrayToHexString(inData)) + Environment.NewLine); });
String logText = String.Format("<= RX ({0}) [ {1}]", inData.Length, ByteArrayToHexString(inData)) + Environment.NewLine;
if (debug)
{
SetLogText(logText);
}
// parse all bytes read through BGLib parser
for (int i = 0; i < inData.Length; i++)
{
bglib.Parse(inData[i]);
}
}
void connectSerialInterfase()
{
if (serialInitializeFlag == false)
{
serialInitializeFlag = true;
}
else
{
setDebugPrint("[ INFO ] COM PORT ( " + serialPort.PortName + " ) を切断します．");
serialOpenFlag = false;
serialPort.Close();
}
var selectSerialWindow = new selectSerialPort();
selectSerialWindow.MainWindowPointer = this;
selectSerialWindow.Show();
//取り敢えずCOM18に設定
serialPort = new System.IO.Ports.SerialPort("COM18", 9600, System.IO.Ports.Parity.None, 8, System.IO.Ports.StopBits.One);
serialPort.NewLine = Environment.NewLine;
serialPort.DataReceived += new System.IO.Ports.SerialDataReceivedEventHandler(serialPort_DataReceivedHandler);
controlInitBtn.IsEnabled = false;
controlUpdateBtn.IsEnabled = false;
controlNextBtn.IsEnabled = false;
}
private void Form1_Load(object sender, EventArgs e)
{
watch = Stopwatch.StartNew();
try
{
/*
* System.IO.Ports.SerialPort tempSerial = new System.IO.Ports.SerialPort();
*
* // Mostly default settings for the serialport except for the PortName which is whatever the user chose.
* tempSerial.BaudRate = 9600;
* tempSerial.PortName = Properties.Settings.Default["CurrentCOMPort"].ToString();
* tempSerial.DataBits = 8;
* tempSerial.DtrEnable = false;
* tempSerial.Handshake = System.IO.Ports.Handshake.None;
* tempSerial.Parity = System.IO.Ports.Parity.None;
* tempSerial.ParityReplace = 63;
* tempSerial.ReadBufferSize = 4096;
* tempSerial.ReadTimeout = -1;
* tempSerial.ReceivedBytesThreshold = 1;
* tempSerial.WriteBufferSize = 2048;
*
* tempSerial.Open();
*
* // Assign the correctly configured serial port to the uninitialized serialport
* SerialPort = tempSerial;
*/
serialPort1.Open();
SerialPort = serialPort1;
} catch (Exception ex)
{
MessageBox.Show(ex.ToString());
}
}
/// <summary>
/// Open the requested COM port when the user clicks an item in the "Serial" menu
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void serialToolStripItem_Click(object sender, ToolStripItemClickedEventArgs e)
{
serial = new System.IO.Ports.SerialPort(e.ClickedItem.Text, 9600);
ToolStripMenuItem item = (ToolStripMenuItem)sender;
try
{
serial.Open();
item.CheckOnClick = true;
item.Checked = true;
}
catch (Exception ex)
{
MessageBox.Show(ex.Message);
}
// Uncheck all other items in menu
foreach (var menuItem in serialToolStripMenuItem.DropDown.Items)
{
ToolStripMenuItem menuItem2 = (ToolStripMenuItem)menuItem;
if (menuItem2 != item)
{
menuItem2.Checked = false;
}
}
}
/// <summary>
/// 获得串口的数据
/// </summary>
/// <returns></returns>
public static byte[] GetSerialPortRecvData(System.IO.Ports.SerialPort serialPort)
{
byte[] outData = new byte[0];
try
{
int iCanReadBytes = 0;
int newICanReadBytes = 0;
do
{
iCanReadBytes = serialPort.BytesToRead;
//稍等一下，等串口上的数据传输完
System.Threading.Thread.Sleep(delayTime);
newICanReadBytes = serialPort.BytesToRead;
} while (iCanReadBytes != newICanReadBytes);//判断是否接收完毕
if (iCanReadBytes <= 0)
{
return(outData);
}
//接收报文
outData = new byte[iCanReadBytes];
serialPort.Read(outData, 0, outData.Length);
return(outData);
}
catch (System.Exception ex)
{
throw ex;
}
}
/** entry point of the application */
public static void Main()
{
/* temporary array */
byte[] scratch = new byte[1];
/* open the UART, select the com port based on the desired gadgeteer port.
* This utilizes the CTRE.IO Library.
* The full listing of COM ports on HERO can be viewed in CTRE.IO
*
*/
_uart = new System.IO.Ports.SerialPort(CTRE.HERO.IO.Port1.UART, 115200);
_uart.Open();
/* send a message to the terminal for the user to see */
_uart.Write(_helloMsg, 0, _helloMsg.Length);
/* loop forever */
while (true)
{
/* read bytes out of uart */
if (_uart.BytesToRead > 0)
{
int readCnt = _uart.Read(_rx, 0, CalcRemainingCap() );
for (int i = 0; i < readCnt; ++i)
{
PushByte(_rx[i]);
}
}
/* if there are bufferd bytes echo them back out */
if (_uart.CanWrite && (_txCnt > 0) )
{
scratch[0] = PopByte();
_uart.Write(scratch, 0, 1);
}
/* wait a bit, keep the main loop time constant, this way you can add to this example (motor control for example). */
System.Threading.Thread.Sleep(10);
}
}
public SimpleBarReader()
{
config = FT.Commons.Cache.StaticCacheManager.GetConfig<BarReaderConfig>();
this.serialPort1=new System.IO.Ports.SerialPort();
this.InitByConfig();
this.serialPort1.DataReceived += new System.IO.Ports.SerialDataReceivedEventHandler(serialPort1_DataReceived);
}
public DongleDevice(string ComPort, int baud)
{
port = new System.IO.Ports.SerialPort(ComPort, baud, System.IO.Ports.Parity.None);
try
{
if (port.IsOpen)
{
Console.WriteLine("port is opened");
Console.ReadKey();
}
// port.DiscardInBuffer();
// port.DiscardOutBuffer();
port.Open();
// port.DtrEnable = true;
port.RtsEnable = true;
}
catch (Exception ex)
{
Console.WriteLine(ex.Message + "," + ex.StackTrace);
Console.ReadKey();
// Environment.Exit(-1);
}
this.RecriveThread = new System.Threading.Thread(ReceiveTask);
RecriveThread.Start();
}
public GrblCore(System.Windows.Forms.Control syncroObject)
{
syncro = syncroObject;
com = new System.IO.Ports.SerialPort();
TX = new Tools.ThreadObject(ThreadTX, 1, true, "Serial TX Thread", null);
RX = new Tools.ThreadObject(ThreadRX, 1, true, "Serial RX Thread", null);
file = new GrblFile();
file.OnFileLoaded += RiseOnFileLoaded;
mMachineStatus = MacStatus.Disconnected;
mQueue = new System.Collections.Generic.Queue <GrblCommand>();
mPending = new System.Collections.Generic.Queue <GrblCommand>();
mSent = new System.Collections.Generic.List <IGrblRow>();
mBuffer = 0;
mSentPtr = mSent;
mQueuePtr = mQueue;
mGrblVersion = null;
mCurOvFeed = mCurOvRapids = mCurOvSpindle = 100;
mTarOvFeed = mTarOvRapids = mTarOvSpindle = 100;
}
static void Main()
{
serial = new System.IO.Ports.SerialPort("COM1", 115200, System.IO.Ports.Parity.None, 8, System.IO.Ports.StopBits.One);
Application.EnableVisualStyles();
Application.SetCompatibleTextRenderingDefault(false);
Application.Run(new frmMain());
}
public bool openCom(System.IO.Ports.SerialPort newPort)
{
ComPort = newPort;
ComunicationPort.ComPortSet(newPort);
ComunicationPort.ComPortOpen();
return true;
}
public static IScaleDataInterpreter GetDataInterpreter(Int32 type, System.IO.Ports.SerialPort port)
{
mSerialPort = port;
IScaleDataInterpreter scaleDataInterpreter;
switch (type)
{
case (int)ScaleBrandType.YH:
scaleDataInterpreter = new YaoHuanDataInterpreter();
break;
case (int)ScaleBrandType.LBKL:
scaleDataInterpreter = new LBKLDataInterpreter();
break;
case (int)ScaleBrandType.TLD:
scaleDataInterpreter = new TLDDataInterpreter();
break;
case (int)ScaleBrandType.SDLS:
scaleDataInterpreter = new SDLSDataInterpreter();
break;
default:
scaleDataInterpreter = new NotSuporInterprete();
break;
}
return(scaleDataInterpreter);
}
/// <summary>
/// Overload Constructor
/// </summary>
/// <param name="SerialPortNumber"></param>
/// <param name="SerialBaudRate"></param>
public clsSLM(int SerialPortNumber, long SerialBaudRate)
{
m_iCommPortNumber = SerialPortNumber;
m_lCommBaudRate = SerialBaudRate;
m_serport = new System.IO.Ports.SerialPort();
}
/// ------------------------------------------------------------------------------
/// <summary>
/// 功 能:打开串口
/// </summary>
/// <param name="portName">串口名</param>
/// <param name="baudRate">波特率</param>
/// <returns>true：打开成功；false：打开失败</returns>
/// -----------------------------------------------------------------------------
private bool open(string portName, int baudRate = 9600)
{
if (_Uartport != null && _Uartport.IsOpen)
{
_Uartport.Close();
Thread.Sleep(20);
}
_Uartport = new System.IO.Ports.SerialPort();
_Uartport.PortName = portName; //设置串口号
_Uartport.BaudRate = baudRate; //设置波特率
_Uartport.Parity = System.IO.Ports.Parity.None; //设置无奇偶校验
_Uartport.DataBits = 8; //设置8比特数据位
_Uartport.StopBits = System.IO.Ports.StopBits.One; //设置1位停止位
_Uartport.ReadBufferSize = ReadBufferSize; //接收缓冲区大小(字节)
_Uartport.WriteBufferSize = WriteBufferSize; //发送缓冲区大小(字节)
_Uartport.ReceivedBytesThreshold = 1; //设置串口触发条件
try
{
_Uartport.Open();
}
catch (Exception ex)
{
//MessageBox.Show(ex.Message);
return(false);
}
return(true);
}
private bool Serial_Write_String(System.IO.Ports.SerialPort Serial, string myOutput)
{
int x;
if (Serial.IsOpen)
{
for (x = 0; x < myOutput.Length; x++)
{
try
{
Serial.Write(myOutput.Substring(x, 1));
}
catch (Exception ex)
{
//clsGlobals.log.Error("", ex);
mstr_error = "Error: Serial Write String" + "\n" + ex.Message;
return(false);
}
//Add the intercharacter Delay
DelayMS(m_iIntercharacterDelay);
}
}
else
{
return(false);
}
//After the transmission is done, wait a little longer
DelayMS(m_iIntercharacterDelay);
return(true);
}
private void btnLoad_Click(object sender, EventArgs e)
{
/*string source = item["source"].InnerText;
* string subject = item["subject"].InnerText;
* string summary = item["summary"].InnerText;
* string date = item["date"].InnerText;
*
* if (item.Name == "RSSEntry")
* {
* lstPrincipal.Items.Add(new ListViewItem(new[] { source + " - " + subject, summary, date }, 0));
* }
* else if (item.Name == "TwitterEntry")
* {
* lstPrincipal.Items.Add(new ListViewItem(new[] { source + " - " + subject, summary, date }, 1));
* }
* else
* {
* lstPrincipal.Items.Add(new ListViewItem(new[] { source + " - " + subject, summary, date }, 2));
* }*/
string state = "Nsadasdsadsa";
string location = "Kitchenasdadasdasdsadsadasdsadsa";
string val;
string val2;
serialPort1 = new System.IO.Ports.SerialPort("COM8", 9600);
serialPort2 = new System.IO.Ports.SerialPort("COM9", 9600);
serialPort2.PortName = "COM9";
serialPort2.BaudRate = 9600;
serialPort1.Open();
val = serialPort1.ReadLine();
serialPort1.Close();
/*serialPort2.Open();
* val2 = serialPort2.ReadLine();
* serialPort2.Close();*/
if (Convert.ToInt32(val) == 0)
{
lstSensors.Items.Add(new ListViewItem(new[] { "No Leak", serialPort1.PortName }, 0));
}
else
{
lstSensors.Items.Add(new ListViewItem(new[] { "Leak!", serialPort1.PortName }, 1));
}
/*if (Convert.ToInt32(val2) == 0)
* {
* lstSensors.Items.Add(new ListViewItem(new[] { "No Leak", serialPort2.PortName }, 0));
* }
* else
* {
* lstSensors.Items.Add(new ListViewItem(new[] { "Leak!", serialPort2.PortName }, 1));
* }*/
lstSensors.Items.Add(new ListViewItem(new[] { state, location }, 1));
}
private bool Serial_Write_Byte(System.IO.Ports.SerialPort Serial, byte myOutput)
{
byte[] temp = new byte[2];
temp[0] = myOutput;
temp[1] = 0;
if (Serial.IsOpen)
{
try
{
Serial.Write(temp, 0, 1);
}
catch (Exception ex)
{
//clsGlobals.log.Error("", ex);
mstr_error = "Error: Serial Write Byte" + "\n" + ex.Message;
return(false);
}
//Add the intercharacter Delay
DelayMS(m_iIntercharacterDelay);
}
else
{
return(false);
}
//After the transmission is done, wait a little longer
DelayMS(m_iIntercharacterDelay);
return(true);
}
// 打印
//打印文字（端口号 字符）
public void PrintString(int Port, string val)
{
System.IO.Ports.SerialPort sp = new System.IO.Ports.SerialPort();
sp.PortName = "COM" + Port.ToString();
try
{
sp.Open();
}
catch
{
throw new AppException("端口被占用");
}
List <byte> data = new List <byte>();
string[] lines = val.Split('\n');
for (int i = 0; i < lines.Length; i++)
{
byte[] content = System.Text.Encoding.Default.GetBytes(lines[i].Replace("\r", ""));
byte[] wapbt = { 0x0a };
data.AddRange(content);
data.AddRange(wapbt);
}
byte[] cutbt = { 0x1d, 0x56, 0x42, 0x11 };
data.AddRange(cutbt);
byte[] databt = data.ToArray();
sp.Write(databt, 0, databt.Length);
sp.Close();
}
private bool Serial_Wait_For_ACK(System.IO.Ports.SerialPort Serial, double TimeoutmSeconds)
{
System.DateTime myTime = new DateTime();
int myRead;
myTime = System.DateTime.Now.AddMilliseconds(TimeoutmSeconds);
while (myTime > System.DateTime.Now)
{
//Only read if there is something in the buffer
if (Serial.IsOpen && Serial.BytesToRead > 0)
{
myRead = Serial.ReadByte();
if (myRead == 6) //ACK
{
return(true);
}
else if (myRead == 21) //NAK
{
return(false);
}
}
}
return(false);
}
public static void UploadData(string comPort, int baudRate)
{
System.IO.Ports.SerialPort Com = new System.IO.Ports.SerialPort(comPort, baudRate, System.IO.Ports.Parity.None, 8, System.IO.Ports.StopBits.Two);
byte[] Data = GetBytesFromCurrentImage(); // Get image data for sending
Com.Open(); //Open port for transfering data
//Setting timeout for writing and reading for 5 seconds
Com.ReadTimeout = 5000;
Com.WriteTimeout = 5000;
//Handshaking
Com.Write("A");
//Acknowledge from the microcontroller
Com.ReadByte();
int offset = 0;
//Sending data to the com port
while (offset < 32 * 360)
{
//Sending 4 column at a time
Com.Write(Data, offset, 32 * 4);
//Waiting for ackknowledge
Com.ReadByte();
offset += 32 * 4;
}
Com.Close(); //Close port
}
private bool Serial_Wait_For_String(System.IO.Ports.SerialPort Serial, string MyString, double TimeoutmSeconds)
{
System.DateTime myTime = new DateTime();
int myRead;
string temp = "";
myTime = System.DateTime.Now.AddMilliseconds(TimeoutmSeconds);
while (myTime > System.DateTime.Now)
{
//Only read if there is something in the buffer
if (Serial.IsOpen && Serial.BytesToRead > 0)
{
myRead = Serial.ReadByte();
temp = temp + (char)myRead;
if (temp.Contains(MyString))
{
return(true);
}
}
}
return(false);
}
private void load_window(object sender, RoutedEventArgs e)
{
//Esto es opcional pero ayuda a colocar el dispositivo Kinect a un cierto angulo de inclinacion, desde -27 a 27
ArduinoPort = new System.IO.Ports.SerialPort();
ArduinoPort.PortName = "COM3"; //sustituir por vuestro
ArduinoPort.BaudRate = 9600;
ArduinoPort.Open();
this.isGrip = false;
//miKinect.Stop();
this.miKinect = KinectSensor.KinectSensors[0]; //this.sensorChooser.sensor.Kinect;//
miKinect.SkeletonStream.Enable();
miKinect.ColorStream.Enable();
this.miKinect.Start();
miKinect.ElevationAngle = 15;
this.miKinect.Stop();
sensorChooser = new KinectChooser(this.kinectRegion, this.sensorChooserUi);
// miKinect.ColorFrameReady += miKinect_ColorFrameReady;
// miKinect.SkeletonFrameReady += miKinect_SkeletonFrameReady;
// AsyncCallback callBack = new AsyncCallback(OnQuery);
// KinectRegion.AddQueryInteractionStatusHandler(this.kinectRegion, OnQuery);
miKinect.ColorFrameReady += miKinect_ColorFrameReady;
Task t1 = Task.Run(() => KinectRegion.AddQueryInteractionStatusHandler(this.kinectRegion, OnQuery));
Task t2 = Task.Run(() => miKinect.SkeletonFrameReady += miKinect_SkeletonFrameReady);
// Task t3 = Task.Run(() =>this.dist.Text = ArduinoPort.ReadByte().ToString());
}
private int Data_RemainingBytes; // remaining bytes yet to be received for the message being currently received
#endregion Fields
#region Constructors
// constructor #1 (commport identified with its number)
public IMUCommsDevice(int CommPortID)
{
// 1. Initializing Commport
CommPort = new System.IO.Ports.SerialPort("COM" + Convert.ToString(CommPortID));
//CommPort.BaudRate = Serial_BaudRate_Standard;
CommPort.BaudRate = Serial_BaudRate_Standard;
CommPort.WriteBufferSize = 10000;
//CommPort.ReadBufferSize = Serial_MaxNumMsgInBuffer * IMUMessage.c_MessageLength;
CommPort.Parity = System.IO.Ports.Parity.None;
CommPort.Handshake = System.IO.Ports.Handshake.RequestToSend;
CommPort.StopBits = System.IO.Ports.StopBits.Two;
CommPort.ReadBufferSize = 10000;
CommPort.ReceivedBytesThreshold = 20;
// 2. Initializing state to St_Idle
//State = St_Idle;
// 3. The device is disabled
Flag_CommsActive = false;
// 4. Creating an empty Message queue
// MessageQueue = new IMUMessageQueue();
// setting last nknown readings to zero
Last_Acc1 = Last_Acc2 = Last_Acc3 = Last_Angvel1 = Last_Angvel2 = Last_Angvel3 = 0;
// create the queue semaphore
//MsgQueueSemaphore = new Semaphore(1, 1);
}
public ValuesController()
{
Arduino = new System.IO.Ports.SerialPort();
Arduino.PortName = "COM4";
Arduino.BaudRate = 9600;
Arduino.Open();
}
public MeterBusStream(SettingsSerial settings)
{
System.IO.Ports.SerialPort serialPort = new System.IO.Ports.SerialPort(settings.PortName, settings.BaudRate, settings.Parity, settings.DataBits, settings.StopBits);
objectsToDispose.Add(serialPort);
serialPort.Open();
this.stream = serialPort.BaseStream;
}
//发送短信
private void SendMessage(String target, String content)
{
System.IO.Ports.SerialPort serial = new System.IO.Ports.SerialPort();
serial.BaudRate = 9600;
serial.DataBits = 8;
serial.Parity = System.IO.Ports.Parity.None;
serial.PortName = "COM4";
serial.StopBits = System.IO.Ports.StopBits.One;
if (!serial.IsOpen)
{
serial.Open();
}
serial.DiscardInBuffer();
PDU sms = new PDU();
sms.setCenter("+8613800571500");
sms.setTarget(target);
sms.setMessage(content);
System.Threading.Thread.Sleep(200);
serial.Write("AT\r\n");
System.Threading.Thread.Sleep(200);
serial.WriteLine("AT+CMGF=0\r\n");
System.Threading.Thread.Sleep(200);
serial.WriteLine("AT+CMGS=" + sms.getPureLength().ToString() + "\r\n");
System.Threading.Thread.Sleep(200);
serial.WriteLine(sms.getPDUCode() + Encoding.ASCII.GetString(new byte[] { (byte)26 }));
System.Threading.Thread.Sleep(2000);
serial.Close();
}
public static bool SerialPortAvailable()
{
try
{
//Debug.Log("Trying to open serial port");
var sp = new System.IO.Ports.SerialPort();
sp.BaudRate = 57600;
sp.PortName = "/dev/null";
sp.Open();
sp.Close();
//Debug.Log("Succeeded...sp support ok");
return true;
} catch (Exception e)
{
//Debug.Log(e.GetType().FullName);
if ( e.GetType().FullName.Contains("DllNotFoundException") // libary not present
|| e.GetType().FullName.Contains("NotInstalledException")) // proxy not removed
{
Debug.Log(e.GetType().FullName);
//Debug.Log("DllNotFoundException caught...");
Debug.Log(e.Message + "\n" + e.StackTrace);
Debug.LogWarning("SerialPort support not found. Uniduino will not function until you use the Install button in the Uniduino Setup utility under Window/Uniduino");
return false;
}
}
return true;
}
//Criar uma instância de um portSerial com as características default
//definidas em MipUsbComConstants
private void createDefaultComPort()
{
if (serialPort != null)
{
return;
}
//criar uma instancia da classe portSerial
serialPort = new System.IO.Ports.SerialPort();
//ajustar propriedades default do port
serialPort.PortName = TeensyUsbComConstants.PortName;
serialPort.BaudRate = TeensyUsbComConstants.BaudRate;
serialPort.DataBits = TeensyUsbComConstants.DataBits;
serialPort.StopBits = TeensyUsbComConstants.StopBits;
serialPort.DtrEnable = TeensyUsbComConstants.DtrEnable;
serialPort.RtsEnable = TeensyUsbComConstants.RtsEnable;
serialPort.Handshake = TeensyUsbComConstants.Handshake;
serialPort.Parity = TeensyUsbComConstants.Parity;
serialPort.ParityReplace = TeensyUsbComConstants.ParityReplace;
serialPort.ReadBufferSize = TeensyUsbComConstants.ReadBufferSize;
serialPort.ReadTimeout = TeensyUsbComConstants.ReadTimeOut;
serialPort.ReceivedBytesThreshold = TeensyUsbComConstants.ReceivedBytesThreshold;
serialPort.WriteBufferSize = TeensyUsbComConstants.WriteBufferSize;
serialPort.WriteTimeout = TeensyUsbComConstants.WriteTimeout;
serialPort.Encoding = Encoding.GetEncoding(TeensyUsbComConstants.Encoding);
serialPort.NewLine = TeensyUsbComConstants.StringEndMsg;
}
public SerialPort()
{
m_port = new System.IO.Ports.SerialPort();
m_port.ErrorReceived += this.Port_ErrorReceived;
m_port.DataReceived += this.Port_DataReceived;
m_port.Encoding = new ASCIIEncoding();
}
//======================================================================
//函数名称：btn_uartcheck_Click
//函数返回：无
//参数说明：无
//功能概要：“重新连接”按钮点击事件，实现上位机与终端的重新连接操作
//======================================================================
private void btn_uartcheck_Click(object sender, EventArgs e)
{
//（1）变量申明
string com;
//（2）更新状态提示信息
fmain.lbl_status.Text = "运行状态：单机“重新连接”按钮...";
//（3）重新遍历串口，寻找下位机
if (uart != null && uart.IsOpen)
{
uart.close();
}
com = pcNode.findPCNode();
uart = pcNode.PCNode_Uart;
fmain.lbl_status.Text = "运行状态：找到" + com;
lbl_uart_state.Text = com;
//（4）重新绑定DataReceived事件(即串口接收中断处理函数）
if (uart != null)
{
uartPort = uart.port;
uartPort.DataReceived -= new System.IO.Ports.SerialDataReceivedEventHandler(this.uartPort_recvData); //先移除委托函数，防止多次触发
uartPort.DataReceived += new System.IO.Ports.SerialDataReceivedEventHandler(this.uartPort_recvData);
uart.setReceInt(500); //相当于关闭串口中断
this.btn_autoUpdate.Enabled = true; //使能连接终端操作
}
else
{
this.btn_autoUpdate.Enabled = false; //使能连接终端操作
}
//（5）修改其他提示信息
fmain.lbl_protocal.Text = "协议：串口";
fmain.lbl_protocalinfo.Text = "协议信息：端口" + com + ",波特率9600";
}
// O evento é gerado quando a serial receber PELO MENOS a quantidade de
// bytes definida na propriedade ReceivedBytesThreshold do port.
// Nesta aplicação aquele limiar é setado para a mínima quantidade de bytes
// que deve ser enviada em cada transação.
// DataReceived event is also raised if an Eof character
// is received, regardless of the number of bytes in the internal input
// buffer and the value of the ReceivedBytesThreshold property.
//
// Os dados recebidos serão armazenados num buffer circular do objeto
// teensyDataObj para tratamento futuro.
//
//NOTA: The DataReceived event is raised on a secondary thread when data is
//received from the SerialPort object.
private void serialPort_DataReceived(object sender, System.IO.Ports.SerialDataReceivedEventArgs e)
{
int bytesRead;
byte[] dataSerial;
//Garantir que este evento foi gerado pelo port do Teensy que estamos usando.
System.IO.Ports.SerialPort sp = (System.IO.Ports.SerialPort)sender;
if (sp.PortName != serialPort.PortName)
{
return;
}
//o buffer temporário deve ser capaz de armazenar todos os byter no receiving buffer da serial
dataSerial = new byte[serialPort.ReadBufferSize];
//buffer para conter dados sendo recebidos pela USB até a chegada completa do pacote.
bytesRead = sp.Read(dataSerial, 0, sp.BytesToRead);
//transferir todos os bytes recebidos para o buffer circular de teensyDataObj
for (int i = 0; i < bytesRead; i++)
{
teensyDataObj.serialDataBC.write(dataSerial[i]);
}
}
public void Close()
{
if (port != null)
{
port.Close();
port = null;
}
}
//The Constructor:
public SerialUtilities()
{
spIOPort = new System.IO.Ports.SerialPort();
SerialOut = new Queue<String>();
//Define Events + Link Handlers:
spIOPort.DataReceived += spIOPort_DataReceived;
spIOPort.ErrorReceived += spIOPort_ErrorReceived;
}
public FormMain()
{
InitializeComponent();
//
// serialPort
//
this.serialPort = new System.IO.Ports.SerialPort();
this.serialPort.DataReceived += new System.IO.Ports.SerialDataReceivedEventHandler(serialPort_DataReceived);
}
public static void Main()
{
port = new System.IO.Ports.SerialPort("Com3", 9600, System.IO.Ports.Parity.None, 8, System.IO.Ports.StopBits.One);
port.Close();
port.Open();
while (true) {
OutputWeather(ConvertWeatherInput(port.ReadLine()));
}
}
public Sim900Modem(int port, GTM.Display_HD44780 display)
{
this.display = display;
socket = GT.Socket.GetSocket(port, true, null, null);
powerPin = new GTI.DigitalOutput(socket, GT.Socket.Pin.Three, false, null);
serial = new System.IO.Ports.SerialPort("COM2", 115200, System.IO.Ports.Parity.None, 8, System.IO.Ports.StopBits.One);
serial.ReadTimeout = 1000;
serial.Open();
bufferd = new byte[32];
}
static void Main()
{
Application.EnableVisualStyles();
Application.SetCompatibleTextRenderingDefault(false);
//定义串口
System.IO.Ports.SerialPort comm = new System.IO.Ports.SerialPort();
Application.Run(new Start(comm));
}
public void Connect(string portName, int baudRate)
{
Close();
port = new System.IO.Ports.SerialPort();
port.PortName = portName;
port.BaudRate = baudRate;
port.Open();
// initialize mavlink.
port.Write("sh /etc/init.d/rc.usb\n");
}
private void Init_Classes()
{
this.serialport = new System.IO.Ports.SerialPort("COM10", 9600, System.IO.Ports.Parity.None, 8, System.IO.Ports.StopBits.One);
this.serialport.Encoding = Encoding.ASCII;
this.serialport.Open();
this.CTS = new CancellationTokenSource();
this.maintask = new Task( new Action(MainTask),this.CTS.Token);
this.maintask.Start();
}
/// <summary>
/// Required method for Designer support - do not modify
/// the contents of this method with the code editor.
/// </summary>
private void InitializeComponent()
{
this.components = new System.ComponentModel.Container();
this.button1 = new System.Windows.Forms.Button();
this.button2 = new System.Windows.Forms.Button();
this.robotPort = new System.IO.Ports.SerialPort(this.components);
this.richTextBox1 = new System.Windows.Forms.RichTextBox();
this.SuspendLayout();
//
// button1
//
this.button1.Location = new System.Drawing.Point(12, 12);
this.button1.Name = "button1";
this.button1.Size = new System.Drawing.Size(75, 23);
this.button1.TabIndex = 0;
this.button1.Text = "Test";
this.button1.UseVisualStyleBackColor = true;
this.button1.Click += new System.EventHandler(this.button1_Click);
//
// button2
//
this.button2.Location = new System.Drawing.Point(93, 12);
this.button2.Name = "button2";
this.button2.Size = new System.Drawing.Size(97, 23);
this.button2.TabIndex = 1;
this.button2.Text = "Walk in square";
this.button2.UseVisualStyleBackColor = true;
this.button2.Visible = false;
this.button2.Click += new System.EventHandler(this.button2_Click);
//
// robotPort
//
this.robotPort.DataReceived += new System.IO.Ports.SerialDataReceivedEventHandler(this.robotPort_DataReceived);
//
// richTextBox1
//
this.richTextBox1.Location = new System.Drawing.Point(12, 40);
this.richTextBox1.Name = "richTextBox1";
this.richTextBox1.Size = new System.Drawing.Size(314, 96);
this.richTextBox1.TabIndex = 2;
this.richTextBox1.Text = "";
//
// Form1
//
this.AutoScaleDimensions = new System.Drawing.SizeF(6F, 13F);
this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font;
this.ClientSize = new System.Drawing.Size(338, 148);
this.Controls.Add(this.richTextBox1);
this.Controls.Add(this.button2);
this.Controls.Add(this.button1);
this.Name = "Form1";
this.Text = "PDACmd";
this.Load += new System.EventHandler(this.Form1_Load);
this.ResumeLayout(false);
}
public ActionResult TurnOn()
{
var components = new System.ComponentModel.Container();
var arduinoPort = new System.IO.Ports.SerialPort(components) {PortName = "COM7"};
arduinoPort.Open();
string on = "H";
arduinoPort.WriteLine(on);
arduinoPort.Close();
return new HttpStatusCodeResult(HttpStatusCode.OK);
}
/// <summary>
/// Initialized the GUI
/// Attempts to open COM 9 by default
/// </summary>
/// <param name="frmChoose">The parent chooser form</param>
public frmTeslaGui(frmChoose frmChoose)
{
InitializeComponent();
this.chooserForm = frmChoose;
updateGUI = new UpdateGUI(this.UpdateGUIFunction);
//add the serial port selection to the menu
string[] serialPorts = System.IO.Ports.SerialPort.GetPortNames();
foreach (string portName in serialPorts)
{
COMPortToolStripMenuItem.DropDownItems.Add(portName, null, (object sender, EventArgs e) =>
{
serialPort.PortName = portName;
UncheckAllComs();
((ToolStripMenuItem)sender).Checked = true;
});
if (portName == "COM9")
{
((ToolStripMenuItem)COMPortToolStripMenuItem.DropDownItems[COMPortToolStripMenuItem.DropDownItems.Count - 1]).Checked = true;
}
}
//set up serial port
serialPort = new System.IO.Ports.SerialPort();
if (serialPorts.Contains("COM9"))
{
serialPort.PortName = "COM9";
}
serialPort.BaudRate = 57600;
serialPort.DataReceived += new System.IO.Ports.SerialDataReceivedEventHandler(serialPort_DataReceived);
//Initialize classes
antComm = new ANTCommunication(ref serialPort, this);
spBuffer = new BufferedReader(this);
tempConv = new TempVal();
//Initialize timers
flashTimer = new System.Timers.Timer(50);
flashTimer.Elapsed += new System.Timers.ElapsedEventHandler(flashTimer_Elapsed);
simTimer = new System.Timers.Timer(500);
simTimer.Elapsed += new System.Timers.ElapsedEventHandler(simTimer_Elapsed);
pastTemps = new Queue<double>(150);
//Clear labels
lblError.Text = "";
lblLastMessage.Text = "";
//Set up last received
lastRecieved = new Dictionary<DataDecoder.SensorType, int>(3);
lastRecieved.Add(DataDecoder.SensorType.Temperature, 100);
lastRecieved.Add(DataDecoder.SensorType.Accelerometer, 100);
lastRecieved.Add(DataDecoder.SensorType.Button, 100);
}
public static void Main()
{
//access weatherboard serial port, com number must be set manually
port = new System.IO.Ports.SerialPort(comPort, 9600, System.IO.Ports.Parity.None, 8, System.IO.Ports.StopBits.One);
//port.Close();
//while (port.IsOpen) { }//loop until port is actually closed
port.Open();
//set up output file
StreamWriter writer = new StreamWriter("C:\\WeatherData.csv", true);
writer.WriteLine("Data Start at " + System.DateTime.Now);
foreach (string s in WEATHER_BOARD_FIELDS)
{
writer.Write(s + ",");
}
writer.WriteLine();
//output data to screen and file
string input;
string output;
double[] data;
while (!System.Console.KeyAvailable)//exit loop if any key is pressed
{
input = port.ReadLine();
data = ConvertWeatherInput(input);
//output comma separated values
//foreach (double d in data)
//{
// writer.Write(d + ",");
//}
////add dew point and newline
//writer.WriteLine(RSMath.TemperatureMath.getDewPoint(input[2], input[0]));
////flush writer to ensure data is written in case of crash
//writer.Flush();
//write output to console window
//OutputWeather(data);
//wait a half second between logged events
System.Threading.Thread.Sleep(2000);
}
//clean up output file
//writer.WriteLine("End of data - file closed normally");
//writer.Close();
//indicate normal close
System.Console.WriteLine("Process ended succesfully. Press Return to exit.");
System.Console.ReadLine();//empty console input
}
public void SetComport(int Port)
{
if (Port > 0 && Port < 21 && transferMode == Constants.TransferMode.COM)
{
comport = Port;
isValidTransferMode = true;
serialPort = new System.IO.Ports.SerialPort("COM" + comport.ToString(), baudrate);
}
else
{
comport = -1;
}
}
public SerialPort([NotNull] string portName) : base(portName) {
if (portName == null) throw new ArgumentNullException("portName");
internalPort = new System.IO.Ports.SerialPort(portName) {
ReadTimeout = 200,
WriteTimeout = 200,
Encoding = Encoding,
NewLine = LineBreak
};
internalPort.Disposed += (s, e) => Dispose(false);
internalPort.Open();
}
internal CSharpSerialPortWrapper(string serialPortName)
{
if (FrostedSerialPortFactory.GetAppropriateFactory("RepRap").IsWindows)
{
try
{
SerialPortFixer.Execute(serialPortName);
}
catch (Exception)
{
}
}
port = new System.IO.Ports.SerialPort(serialPortName);
}
public SerialService(string namePort)
{
try
{
_Port = new System.IO.Ports.SerialPort(namePort);
init();
}
catch (Exception e)
{
ErrorMessage = e.Message;
Status = false;
}
Status = true;
}
public SerialService(string namePort, int baudRate, System.IO.Ports.Parity parity)
{
try
{
_Port = new System.IO.Ports.SerialPort(namePort, baudRate, parity);
init();
}
catch (Exception e)
{
ErrorMessage = e.Message;
Status = false;
}
Status = true;
}
public XModem(System.IO.Ports.SerialPort port)
{
//if (sp != null)
{
try
{
this.sp = port;
if (!sp.IsOpen) sp.Open();
sp.DataReceived += new System.IO.Ports.SerialDataReceivedEventHandler(sp_DataReceived);
bOpen = true;
}
catch { }
}
}
public CtlPacket(System.IO.Ports.SerialPort tPort, ushort addr, UInt16 ctlWord, byte tcnt)
{
serial = tPort;
buffer = new byte[9];
buffer[0] = 0xfe;
buffer[1] = 0x09;
buffer[2] = 0x05;
buffer[3] = (byte)(addr >> 8); //高8位
buffer[4] = (byte)(addr & 0x00FF);//低8位
buffer[5] = (byte)(ctlWord >> 8); ;//高8位
buffer[6] = (byte)(ctlWord & 0x00FF);//低8位
buffer[7] = tcnt;
buffer[8] = 0xfb;
cnt = tcnt;
}
const string VideoFile = @"tohou.mp4"; // Bad apple!! original video (03:39 length)
#endregion Fields
#region Methods
static void Main(string[] args)
{
var files = Directory.EnumerateFiles(ImagePath).ToList();
var images = files.Select(File.ReadAllBytes).ToArray();
WMPLib.WindowsMediaPlayer player = new WMPLib.WindowsMediaPlayer();
player.settings.autoStart = false;
player.settings.playCount = 1000;
player.URL = VideoFile;
Thread.Sleep(1000); // let wmp to finish all the loading shit
var com = new System.IO.Ports.SerialPort(PortName, 115200, System.IO.Ports.Parity.None, 8, System.IO.Ports.StopBits.One);
com.Open();
int currentImage = 0;
bool isPlaying = false;
while (currentImage < images.Length)
{
com.ReadByte();
if (!isPlaying)
{
player.controls.play();
isPlaying = true;
}
var currentPosition = player.controls.currentPosition;
currentImage = (int)(FPS * currentPosition);
com.Write(images[Math.Min(currentImage, images.Length - 1)], 0, 504);
}
com.Close();
}