/// <summary>
/// takes in a parsed path and returns a list of points that can be used to draw the path
/// </summary>
/// <returns>The drawing points.</returns>
/// <param name="segments">Segments.</param>
public Vector2[] GetDrawingPoints(List <SvgPathSegment> segments, float flatness = 3)
{
var path = new System.Drawing.Drawing2D.GraphicsPath();
for (var j = 0; j < segments.Count; j++)
{
var segment = segments[j];
if (segment is SvgMoveToSegment)
{
path.StartFigure();
}
else if (segment is SvgCubicCurveSegment)
{
var cubicSegment = segment as SvgCubicCurveSegment;
path.AddBezier(ToDrawPoint(segment.Start), ToDrawPoint(cubicSegment.FirstCtrlPoint),
ToDrawPoint(cubicSegment.SecondCtrlPoint), ToDrawPoint(segment.End));
}
else if (segment is SvgClosePathSegment)
{
// important for custom line caps. Force the path the close with an explicit line, not just an implicit close of the figure.
if (path.PointCount > 0 && !path.PathPoints[0].Equals(path.PathPoints[path.PathPoints.Length - 1]))
{
var i = path.PathTypes.Length - 1;
while (i >= 0 && path.PathTypes[i] > 0)
{
i--;
}
if (i < 0)
{
i = 0;
}
path.AddLine(path.PathPoints[path.PathPoints.Length - 1], path.PathPoints[i]);
}
path.CloseFigure();
}
else if (segment is SvgLineSegment)
{
path.AddLine(ToDrawPoint(segment.Start), ToDrawPoint(segment.End));
}
else if (segment is SvgQuadraticCurveSegment)
{
var quadSegment = segment as SvgQuadraticCurveSegment;
path.AddBezier(ToDrawPoint(segment.Start), ToDrawPoint(quadSegment.FirstCtrlPoint),
ToDrawPoint(quadSegment.SecondCtrlPoint), ToDrawPoint(segment.End));
}
else
{
Debug.Warn("unknown type in getDrawingPoints");
}
}
path.Flatten(new System.Drawing.Drawing2D.Matrix(), flatness);
return(System.Array.ConvertAll(path.PathPoints, i => new Vector2(i.X, i.Y)));
}
/// <summary>
/// Returns a GraphicsPath which represent a rounded rectangle.
/// </summary>
/// <param name="r">Rectangle that contains logically the rounded rectangle.</param>
/// <param name="r1"></param>
/// <param name="r2"></param>
/// <param name="r3"></param>
/// <param name="r4"></param>
/// <returns></returns>
private System.Drawing.Drawing2D.GraphicsPath GetRoundedRect(Rectangle r, float r1, float r2, float r3, float r4)
{
float X = r.X, Y = r.Y, w = r.Width, h = r.Height;
System.Drawing.Drawing2D.GraphicsPath rr = new System.Drawing.Drawing2D.GraphicsPath();
rr.AddBezier(X, Y + r1, X, Y, X + r1, Y, X + r1, Y);
rr.AddLine(X + r1, Y, X + w - r2, Y);
rr.AddBezier(X + w - r2, Y, X + w, Y, X + w, Y + r2, X + w, Y + r2);
rr.AddLine(X + w, Y + r2, X + w, Y + h - r3);
rr.AddBezier(X + w, Y + h - r3, X + w, Y + h, X + w - r3, Y + h, X + w - r3, Y + h);
rr.AddLine(X + w - r3, Y + h, X + r4, Y + h);
rr.AddBezier(X + r4, Y + h, X, Y + h, X, Y + h - r4, X, Y + h - r4);
rr.AddLine(X, Y + h - r4, X, Y + r1);
return(rr);
}
/// <summary>
/// takes in a parsed path and returns a list of points that can be used to draw the path
/// </summary>
/// <returns>The drawing points.</returns>
/// <param name="segments">Segments.</param>
public Vector2[] getDrawingPoints( List<SvgPathSegment> segments, float flatness = 3 )
{
var path = new System.Drawing.Drawing2D.GraphicsPath();
for( var j = 0; j < segments.Count; j++ )
{
var segment = segments[j];
if( segment is SvgMoveToSegment )
{
path.StartFigure();
}
else if( segment is SvgCubicCurveSegment )
{
var cubicSegment = segment as SvgCubicCurveSegment;
path.AddBezier( toDrawPoint( segment.start ), toDrawPoint( cubicSegment.firstCtrlPoint ), toDrawPoint( cubicSegment.secondCtrlPoint ), toDrawPoint( segment.end ) );
}
else if( segment is SvgClosePathSegment )
{
// important for custom line caps. Force the path the close with an explicit line, not just an implicit close of the figure.
if( path.PointCount > 0 && !path.PathPoints[0].Equals( path.PathPoints[path.PathPoints.Length - 1] ) )
{
var i = path.PathTypes.Length - 1;
while( i >= 0 && path.PathTypes[i] > 0 )
i--;
if( i < 0 )
i = 0;
path.AddLine( path.PathPoints[path.PathPoints.Length - 1], path.PathPoints[i] );
}
path.CloseFigure();
}
else if( segment is SvgLineSegment )
{
path.AddLine( toDrawPoint( segment.start ), toDrawPoint( segment.end ) );
}
else if( segment is SvgQuadraticCurveSegment )
{
var quadSegment = segment as SvgQuadraticCurveSegment;
path.AddBezier( toDrawPoint( segment.start ), toDrawPoint( quadSegment.firstCtrlPoint ), toDrawPoint( quadSegment.secondCtrlPoint ), toDrawPoint( segment.end ) );
}
else
{
Debug.warn( "unknown type in getDrawingPoints" );
}
}
path.Flatten( new System.Drawing.Drawing2D.Matrix(), flatness );
return System.Array.ConvertAll( path.PathPoints, i => new Vector2( i.X, i.Y ) );
}
private static void AddSegmentToPath(ICurve seg, ref System.Drawing.Drawing2D.GraphicsPath p)
{
const float radiansToDegrees = (float)(180.0 / Math.PI);
LineSegment line = seg as LineSegment;
if (line != null)
{
p.AddLine(PointF(line.Start), PointF(line.End));
}
else
{
CubicBezierSegment cb = seg as CubicBezierSegment;
if (cb != null)
{
p.AddBezier(PointF(cb.B(0)), PointF(cb.B(1)), PointF(cb.B(2)), PointF(cb.B(3)));
}
else
{
Ellipse ellipse = seg as Ellipse;
if (ellipse != null)
{
p.AddArc((float)(ellipse.Center.X - ellipse.AxisA.Length), (float)(ellipse.Center.Y - ellipse.AxisB.Length),
(float)(2 * ellipse.AxisA.Length), (float)(2 * ellipse.AxisB.Length), (float)(ellipse.ParStart * radiansToDegrees),
(float)((ellipse.ParEnd - ellipse.ParStart) * radiansToDegrees));
}
}
}
}
public override void AddBezierCurve(PointF p1, PointF p2, PointF p3, PointF p4)
{
p.AddBezier(
p1.X, p1.Y,
p2.X, p2.Y,
p3.X, p3.Y,
p4.X, p4.Y);
}
public static System.Drawing.Drawing2D.GraphicsPath DrawRoundRect(Rectangle r, int r1, int r2, int r3, int r4)
{
float x = r.X;
float y = r.Y;
float width = r.Width;
float height = r.Height;
System.Drawing.Drawing2D.GraphicsPath path = new System.Drawing.Drawing2D.GraphicsPath();
path.AddBezier(x, y + r1, x, y, x + r1, y, x + r1, y);
path.AddLine(x + r1, y, (x + width) - r2, y);
path.AddBezier((x + width) - r2, y, x + width, y, x + width, y + r2, x + width, y + r2);
path.AddLine((float)(x + width), (float)(y + r2), (float)(x + width), (float)((y + height) - r3));
path.AddBezier((float)(x + width), (float)((y + height) - r3), (float)(x + width), (float)(y + height), (float)((x + width) - r3), (float)(y + height), (float)((x + width) - r3), (float)(y + height));
path.AddLine((float)((x + width) - r3), (float)(y + height), (float)(x + r4), (float)(y + height));
path.AddBezier(x + r4, y + height, x, y + height, x, (y + height) - r4, x, (y + height) - r4);
path.AddLine(x, (y + height) - r4, x, y + r1);
return path;
}
public override void AddToPath(System.Drawing.Drawing2D.GraphicsPath path, EPoint ptStart, float scale)
{
System.Collections.ArrayList pts = this.GeneratePoints(ptStart);
path.AddBezier(
((EPointF)pts[0]).X * scale, ((EPointF)pts[0]).Y * scale,
((EPointF)pts[1]).X * scale, ((EPointF)pts[1]).Y * scale,
((EPointF)pts[2]).X * scale, ((EPointF)pts[2]).Y * scale,
((EPointF)pts[3]).X * scale, ((EPointF)pts[3]).Y * scale);
}
public static System.Drawing.Drawing2D.GraphicsPath DrawRoundRect(Rectangle r, int r1, int r2, int r3, int r4)
{
float x = r.X;
float y = r.Y;
float width = r.Width;
float height = r.Height;
System.Drawing.Drawing2D.GraphicsPath path = new System.Drawing.Drawing2D.GraphicsPath();
path.AddBezier(x, y + r1, x, y, x + r1, y, x + r1, y);
path.AddLine(x + r1, y, (x + width) - r2, y);
path.AddBezier((x + width) - r2, y, x + width, y, x + width, y + r2, x + width, y + r2);
path.AddLine((float)(x + width), (float)(y + r2), (float)(x + width), (float)((y + height) - r3));
path.AddBezier((float)(x + width), (float)((y + height) - r3), (float)(x + width), (float)(y + height), (float)((x + width) - r3), (float)(y + height), (float)((x + width) - r3), (float)(y + height));
path.AddLine((float)((x + width) - r3), (float)(y + height), (float)(x + r4), (float)(y + height));
path.AddBezier(x + r4, y + height, x, y + height, x, (y + height) - r4, x, (y + height) - r4);
path.AddLine(x, (y + height) - r4, x, y + r1);
return(path);
}
protected override void OnPaint(PaintEventArgs pe)
{
using (System.Drawing.Drawing2D.GraphicsPath path = new System.Drawing.Drawing2D.GraphicsPath()) {
path.AddBezier(this.Width >> 1,
this.Height >> 2,
this.Width * 1.25f, 0f,
this.Width,
this.Height * 0.75f,
this.Width >> 1,
this.Height);
path.AddBezier(this.Width >> 1,
this.Height >> 2,
-this.Width * .25f, 0f,
0f,
this.Height * 0.75f,
this.Width >> 1,
this.Height);
this.Region = new Region(path);
}
}
public void Curve3(double p2x, double p2y, double x, double y)
{
//from http://stackoverflow.com/questions/9485788/convert-quadratic-curve-to-cubic-curve
//Control1X = StartX + (.66 * (ControlX - StartX))
//Control2X = EndX + (.66 * (ControlX - EndX))
float c1x = lastX + (float)((2f / 3f) * (p2x - lastX));
float c1y = lastY + (float)((2f / 3f) * (p2y - lastY));
//---------------------------------------------------------------------
float c2x = (float)(x + ((2f / 3f) * (p2x - x)));
float c2y = (float)(y + ((2f / 3f) * (p2y - y)));
//---------------------------------------------------------------------
ps.AddBezier(
new PointF(lastX, lastY),
new PointF(c1x, c1y),
new PointF(c2x, c2y),
new PointF(lastX = (float)x, lastY = (float)y));
}
protected void AddBezierPath(System.Drawing.Drawing2D.GraphicsPath path, Point pstart, Point pend, bool sside, bool eside)
{
Point ctrl1 = new Point(pstart.X, pstart.Y + Height / 2);
Point ctrl2 = new Point(pend.X, pend.Y - Height / 2);
if (sside)
{
if (pend.X < pstart.X)
{
ctrl1 = new Point(pstart.X - Width / 2, pstart.Y);
}
else
{
ctrl1 = new Point(pstart.X + Width / 2, pstart.Y);
}
}
else
{
if (pend.Y < pstart.Y)
{
ctrl1 = new Point(pstart.X, pstart.Y - Height / 2);
}
}
if (this.EndElement.Docks[this.EndAnchor].IsSideDock)
{
if (pend.X < pstart.X)
{
ctrl2 = new Point(pend.X + Width / 2, pend.Y);
}
else
{
ctrl2 = new Point(pend.X - Width / 2, pend.Y);
}
}
else
{
if (pend.Y < pstart.Y)
{
ctrl2 = new Point(pend.X, pend.Y + Height / 2);
}
}
path.AddBezier(
pstart.X, pstart.Y, ctrl1.X, ctrl1.Y,
ctrl2.X, ctrl2.Y, pend.X, pend.Y);
}
void Test1()
{
for (int i = 0; i < 10; ++i)
{
Point p0 = new Point(0, 0);
Point p1 = new Point(20, 50);
Point p2 = new Point(80, 50);
Point p3 = new Point(100, i * 10);
g.DrawRectangle(Pens.Red, new Rectangle(p0, new System.Drawing.Size(1, 1)));
g.DrawRectangle(Pens.Green, new Rectangle(p1, new System.Drawing.Size(1, 1)));
g.DrawRectangle(Pens.Green, new Rectangle(p2, new System.Drawing.Size(1, 1)));
g.DrawRectangle(Pens.Red, new Rectangle(p3, new System.Drawing.Size(1, 1)));
System.Drawing.Drawing2D.GraphicsPath p = new System.Drawing.Drawing2D.GraphicsPath();
p.AddBezier(p0, p1, p2, p3);
g.DrawPath(Pens.Black, p);
}
}
static System.Drawing.Drawing2D.GraphicsPath ResolveGraphicsPath(GraphicsPath path)
{
//convert from graphics path to internal presentation
System.Drawing.Drawing2D.GraphicsPath innerPath = path.InnerPath as System.Drawing.Drawing2D.GraphicsPath;
if (innerPath != null)
{
return(innerPath);
}
//--------
innerPath = new System.Drawing.Drawing2D.GraphicsPath();
path.InnerPath = innerPath;
List <float> points;
List <PathCommand> cmds;
GraphicsPath.GetPathData(path, out points, out cmds);
int j = cmds.Count;
int p_index = 0;
for (int i = 0; i < j; ++i)
{
PathCommand cmd = cmds[i];
switch (cmd)
{
default:
throw new NotSupportedException();
case PathCommand.Arc:
innerPath.AddArc(
points[p_index],
points[p_index + 1],
points[p_index + 2],
points[p_index + 3],
points[p_index + 4],
points[p_index + 5]);
p_index += 6;
break;
case PathCommand.Bezier:
innerPath.AddBezier(
points[p_index],
points[p_index + 1],
points[p_index + 2],
points[p_index + 3],
points[p_index + 4],
points[p_index + 5],
points[p_index + 6],
points[p_index + 7]);
p_index += 8;
break;
case PathCommand.CloseFigure:
innerPath.CloseFigure();
break;
case PathCommand.Ellipse:
innerPath.AddEllipse(
points[p_index],
points[p_index + 1],
points[p_index + 2],
points[p_index + 3]);
p_index += 4;
break;
case PathCommand.Line:
innerPath.AddLine(
points[p_index],
points[p_index + 1],
points[p_index + 2],
points[p_index + 3]);
p_index += 4;
break;
case PathCommand.Rect:
innerPath.AddRectangle(
new System.Drawing.RectangleF(
points[p_index],
points[p_index + 1],
points[p_index + 2],
points[p_index + 3]));
p_index += 4;
break;
case PathCommand.StartFigure:
break;
}
}
return(innerPath);
}
public override void AddToPath(System.Drawing.Drawing2D.GraphicsPath graphicsPath)
{
graphicsPath.AddBezier(this.Start, this.FirstControlPoint, this.SecondControlPoint, this.End);
}
static System.Drawing.Drawing2D.GraphicsPath ResolveGraphicsPath(GraphicsPath path)
{
//convert from graphics path to internal presentation
System.Drawing.Drawing2D.GraphicsPath innerPath = path.InnerPath as System.Drawing.Drawing2D.GraphicsPath;
if (innerPath != null)
{
return innerPath;
}
//--------
innerPath = new System.Drawing.Drawing2D.GraphicsPath();
path.InnerPath = innerPath;
List<float> points;
List<PathCommand> cmds;
GraphicsPath.GetPathData(path, out points, out cmds);
int j = cmds.Count;
int p_index = 0;
for (int i = 0; i < j; ++i)
{
PathCommand cmd = cmds[i];
switch (cmd)
{
default:
throw new NotSupportedException();
case PathCommand.Arc:
innerPath.AddArc(
points[p_index],
points[p_index + 1],
points[p_index + 2],
points[p_index + 3],
points[p_index + 4],
points[p_index + 5]);
p_index += 6;
break;
case PathCommand.Bezier:
innerPath.AddBezier(
points[p_index],
points[p_index + 1],
points[p_index + 2],
points[p_index + 3],
points[p_index + 4],
points[p_index + 5],
points[p_index + 6],
points[p_index + 7]);
p_index += 8;
break;
case PathCommand.CloseFigure:
innerPath.CloseFigure();
break;
case PathCommand.Ellipse:
innerPath.AddEllipse(
points[p_index],
points[p_index + 1],
points[p_index + 2],
points[p_index + 3]);
p_index += 4;
break;
case PathCommand.Line:
innerPath.AddLine(
points[p_index],
points[p_index + 1],
points[p_index + 2],
points[p_index + 3]);
p_index += 4;
break;
case PathCommand.Rect:
innerPath.AddRectangle(
new System.Drawing.RectangleF(
points[p_index],
points[p_index + 1],
points[p_index + 2],
points[p_index + 3]));
p_index += 4;
break;
case PathCommand.StartFigure:
break;
}
}
return innerPath;
}
public override void AddToPath(System.Drawing.Drawing2D.GraphicsPath path)
{
path.AddBezier(ptStart, ptControl1, ptControl2, ptEnd);
}
/// <summary>
/// Fill a closed path composed of several drawing operations
/// </summary>
/// <param name="canvas"></param>
public void Fill(System.Drawing.Graphics canvas)
{
System.Drawing.Drawing2D.GraphicsPath path;
path = new System.Drawing.Drawing2D.GraphicsPath();
for (int i = 0; i < m_drawings.Count; i++)
{
switch (m_drawings[i].Type)
{
case DrawingType.Line:
{
path.AddLine(m_drawings[i].Points[0].x, m_drawings[i].Points[0].y, m_drawings[i].Points[1].x, m_drawings[i].Points[1].y);
break;
}
case DrawingType.Arc:
{
double startAngle, endAngle;
startAngle = System.Math.Atan2(m_drawings[i].Points[2].y - (m_drawings[i].Points[1].y + m_drawings[i].Points[0].y) / 2, m_drawings[i].Points[2].x - (m_drawings[i].Points[1].x + m_drawings[i].Points[0].x) / 2);
if (startAngle < 0)
{
startAngle += System.Math.PI * 2;
}
startAngle = (startAngle / Math.PI) * 180;
endAngle = System.Math.Atan2(m_drawings[i].Points[3].y - (m_drawings[i].Points[1].y + m_drawings[i].Points[0].y) / 2, m_drawings[i].Points[3].x - (m_drawings[i].Points[1].x + m_drawings[i].Points[0].x) / 2);
if (endAngle < 0)
{
endAngle += System.Math.PI * 2;
}
endAngle = (endAngle / Math.PI) * 180;
path.AddArc(m_drawings[i].Points[0].x, m_drawings[i].Points[0].y, m_drawings[i].Points[1].x - m_drawings[i].Points[0].x, m_drawings[i].Points[1].y - m_drawings[i].Points[0].y, (float)startAngle, Math.Abs((float)(endAngle - startAngle)));
break;
}
case DrawingType.Bezier:
{
path.AddBezier(m_drawings[i].Points[0].x, m_drawings[i].Points[0].y, m_drawings[i].Points[2].x, m_drawings[i].Points[2].y, m_drawings[i].Points[3].x, m_drawings[i].Points[3].y, m_drawings[i].Points[1].x, m_drawings[i].Points[1].y);
break;
}
}
}
canvas.FillPath(m_style.fillingStyle, path);
}