public static RenderGeometry CreateSphereGeometry(float radius, int segmentP, int segmentH, bool smoothH, bool smoothV, float cutTop = 0, float cutBottom = 0)
{
if (cutTop + cutBottom > 1)
{
return(new RenderGeometry());
}
RenderGeometry.FaceType faceType = GetFaceType(smoothH, smoothV);
StructureGeometry structure = new StructureGeometry();
SurfaceComponentGeometry upperPart, lowerPart, middlePart;
if (cutTop != 0)
{
upperPart = SurfaceComponentGeometries.CreateRegularPolygonGeometry(radius * Mathf.Sqrt(4 * cutTop * (1 - cutTop)), segmentP, 2);
upperPart.ApplyOffset(radius * (1 - 2 * cutTop) * Vector3.up);
}
else
{
float angle = cutBottom != 0 ? Mathf.Acos(-1 + cutBottom * 2) : Mathf.PI * (segmentH / 2) / segmentH;
upperPart = SurfaceComponentGeometries.CreateSphereCapGeometry(radius, segmentP, cutBottom != 0 ? segmentH : segmentH / 2, 2 * angle, 0, 1, faceType);
}
if (cutBottom != 0)
{
lowerPart = SurfaceComponentGeometries.CreateRegularPolygonGeometry(radius * Mathf.Sqrt(4 * cutBottom * (1 - cutBottom)), segmentP, 2);
lowerPart.ApplyOffset(radius * (1 - 2 * cutBottom) * Vector3.up);
lowerPart.ApplyRotation(Quaternion.AngleAxis(180, Vector3.right));
}
else
{
float angle = cutTop != 0 ? Mathf.Acos(-1 + cutTop * 2) : Mathf.PI * ((segmentH + 1) / 2) / segmentH;
lowerPart = SurfaceComponentGeometries.CreateSphereCapGeometry(radius, segmentP, cutTop != 0 ? segmentH : (segmentH + 1) / 2, 2 * angle, 0, 1, faceType);
lowerPart.ApplyRotation(Quaternion.AngleAxis(180, Vector3.right));
}
if (cutTop != 0 && cutBottom != 0)
{
float angle1 = Mathf.Acos(1 - cutTop * 2);
float angle2 = Mathf.Acos(-1 + cutBottom * 2);
middlePart = SurfaceComponentGeometries.CreateSphereSideGeometry(radius, angle1, angle2, segmentP, segmentH, 0, 1, faceType);
Vertex cornerUp = structure.CreateVertex();
Vertex cornerDown = structure.CreateVertex();
structure.CreateFace(middlePart, false, cornerUp, cornerUp, cornerDown, cornerDown);
structure.CreateFace(upperPart, false, cornerUp);
structure.CreateFace(lowerPart, false, cornerDown);
}
else
{
Vertex corner = structure.CreateVertex();
structure.CreateFace(upperPart, false, corner);
structure.CreateFace(lowerPart, false, corner);
}
return(structure.Build());
}
public static RenderGeometry CreateConeGeometry(float radius, float height, int segmentP, int segmentH, bool smoothH, bool smoothV, float cutTop = 0, float cutAngle = 0)
{
if (cutTop == 0)
{
StructureGeometry structure = new StructureGeometry();
RenderGeometry.FaceType faceType = GetFaceType(smoothH, smoothV);
SurfaceComponentGeometry coneCap = SurfaceComponentGeometries.CreateConeCapGeometry(radius, height, segmentP, segmentH, cutAngle, 1, faceType);
if (cutAngle == 0)
{
SurfaceComponentGeometry bottom = SurfaceComponentGeometries.CreateRegularPolygonGeometry(radius, segmentP, 2);
bottom.ApplyRotation(Quaternion.AngleAxis(180, Vector3.right));
Vertex corner = structure.CreateVertex();
structure.CreateFace(coneCap, false, corner);
structure.CreateFace(bottom, false, corner);
}
else
{
SurfaceComponentGeometry bottom = SurfaceComponentGeometries.CreateFanCapGeometry(radius, segmentP, 1, cutAngle, 2);
SurfaceComponentGeometry wall1 = SurfaceComponentGeometries.CreateTriangleGeometry(1, 1, 0, segmentH, true, 3);
SurfaceComponentGeometry wall2 = SurfaceComponentGeometries.CreateTriangleGeometry(1, 1, 0, segmentH, true, 4);
Vertex cornerUp = structure.CreateVertex(new Vector3(0, height, 0));
Vertex cornerDownC = structure.CreateVertex(Vector3.zero);
Vertex cornerDown1 = structure.CreateVertex(new Vector3(radius * Mathf.Cos(cutAngle), 0, -radius * Mathf.Sin(cutAngle)));
Vertex cornerDown2 = structure.CreateVertex(new Vector3(radius, 0, 0));
structure.CreateFace(coneCap, true, cornerDown1, cornerDown2, cornerUp);
structure.CreateFace(bottom, true, cornerDown2, cornerDown1, cornerDownC);
structure.CreateFace(wall1, true, cornerDown1, cornerUp, cornerDownC);
structure.CreateFace(wall2, true, cornerDownC, cornerUp, cornerDown2);
}
return(structure.Build());
}
else
{
RenderGeometry geometry = CreateCylinderGeometry(radius, height, segmentP, segmentH, smoothH, smoothV, cutAngle);
geometry.ApplyOffset(Vector3.up * (height / 2));
float shrinkCoeff = (1 - cutTop) / height;
SpaceWarp warp = new SpaceWarp($"x*(1-y*{shrinkCoeff})", "y", $"z*(1-y*{shrinkCoeff})");
geometry.ApplySpaceWarp(warp);
return(geometry);
}
}
public static RenderGeometry CreateSpringGeometry(float ringRadius, float barRadius, float heightPerCycle, int segmentPerCycle, int segmentBar, bool smoothH, bool smoothV, float angle = 0, float deltaAngle = 0)
{
StructureGeometry structure = new StructureGeometry();
RenderGeometry.FaceType faceType = GetFaceType(smoothH, smoothV);
float heightPerRad = heightPerCycle / (2 * Mathf.PI);
float slope = heightPerRad / ringRadius;
float scaleH = Mathf.Sqrt(1 + slope * slope);
int segmentRing = Mathf.CeilToInt(segmentPerCycle * angle / (2 * Mathf.PI) - 1e-6f);
SurfaceComponentGeometry face = SurfaceComponentGeometries.CreatePlaneGeometry(1, 1, segmentBar, segmentRing, 1, faceType);
var warp = new SpaceWarp(
$" a1=(z+0.5)*{angle}",
$" a2={deltaAngle}-x*(2*PI)",
$" r={ringRadius}+{barRadius}*cos(a2)",
$" X=r*cos(a1)",
$" Y={scaleH}*{barRadius}*sin(a2)+a1*{heightPerRad}",
$" Z=r*sin(a1)"
);
face.ApplySpaceWarp(warp);
SurfaceComponentGeometry cap1 = SurfaceComponentGeometries.CreateRegularPolygonGeometry(barRadius, segmentBar, 2);
SurfaceComponentGeometry cap2 = SurfaceComponentGeometries.CreateRegularPolygonGeometry(barRadius, segmentBar, 2);
cap1.ApplyLinearTransform(
Matrix4x4.Translate(Vector3.right * ringRadius) *
Matrix4x4.Scale(new Vector3(1, scaleH, 1)) *
Matrix4x4.Rotate(Quaternion.LookRotation(Vector3.down, Vector3.back) * Quaternion.AngleAxis(-deltaAngle * Mathf.Rad2Deg, Vector3.up)));
cap2.ApplyLinearTransform(
Matrix4x4.Translate(new Vector3(ringRadius * Mathf.Cos(angle), heightPerRad * angle, ringRadius * Mathf.Sin(angle))) *
Matrix4x4.Scale(new Vector3(1, scaleH, 1)) *
Matrix4x4.Rotate(Quaternion.LookRotation(Vector3.up, Quaternion.AngleAxis(angle * Mathf.Rad2Deg, Vector3.down) * Vector3.forward) * Quaternion.AngleAxis(deltaAngle * Mathf.Rad2Deg, Vector3.up)));
Vertex corner1 = structure.CreateVertex();
Vertex corner2 = structure.CreateVertex();
structure.CreateFace(face, false, corner1, corner2, corner2, corner1);
structure.CreateFace(cap1, false, corner1);
structure.CreateFace(cap2, false, corner2);
return(structure.Build());
}
public static RenderGeometry CreateTorusGeometry(float ringRadius, float barRadius, int segmentRing, int segmentBar, bool smoothH, bool smoothV, float cutAngle = 0, float deltaAngle = 0)
{
StructureGeometry structure = new StructureGeometry();
RenderGeometry.FaceType faceType = GetFaceType(smoothH, smoothV);
SurfaceComponentGeometry face = SurfaceComponentGeometries.CreatePlaneGeometry(1, 1, segmentBar, segmentRing, 1, faceType);
var warp = new SpaceWarp(
$" a1=(z+0.5)*(2*PI-{cutAngle})",
$" a2={deltaAngle}-x*(2*PI)",
$" r={ringRadius}+{barRadius}*cos(a2)",
$" X=r*cos(a1)",
$" Y={barRadius}*sin(a2)",
$" Z=r*sin(a1)"
);
face.ApplySpaceWarp(warp);
if (cutAngle == 0)
{
Vertex corner = structure.CreateVertex();
structure.CreateFace(face, false, corner, corner, corner, corner);
}
else
{
SurfaceComponentGeometry cap1 = SurfaceComponentGeometries.CreateRegularPolygonGeometry(barRadius, segmentBar, 2);
SurfaceComponentGeometry cap2 = SurfaceComponentGeometries.CreateRegularPolygonGeometry(barRadius, segmentBar, 2);
cap1.ApplyRotation(Quaternion.LookRotation(Vector3.down, Vector3.back) * Quaternion.AngleAxis(-deltaAngle, Vector3.up));
cap1.ApplyOffset(Vector3.right * ringRadius);
cap2.ApplyRotation(Quaternion.LookRotation(Vector3.up, Quaternion.AngleAxis(cutAngle * Mathf.Rad2Deg, Vector3.up) * Vector3.forward) * Quaternion.AngleAxis(deltaAngle * Mathf.Rad2Deg, Vector3.up));
cap2.ApplyOffset(new Vector3(ringRadius * Mathf.Cos(cutAngle), 0, -ringRadius * Mathf.Sin(cutAngle)));
Vertex corner1 = structure.CreateVertex();
Vertex corner2 = structure.CreateVertex();
structure.CreateFace(face, false, corner1, corner2, corner2, corner1);
structure.CreateFace(cap1, false, corner1);
structure.CreateFace(cap2, false, corner2);
}
return(structure.Build());
}
public void UpdateMesh()
{
if (meshSaved)
{
return;
}
RenderGeometry g = null;
if (type == HyperPrimitiveType.Plane)
{
g = SurfaceComponentGeometries.CreatePlaneGeometry(sizeX, sizeZ, segmentX, segmentZ);
}
else if (type == HyperPrimitiveType.Triangle)
{
g = SurfaceComponentGeometries.CreateTriangleGeometry(sizeX, sizeZ, offset, segmentX);
}
else if (type == HyperPrimitiveType.Polygon)
{
g = SurfaceComponentGeometries.CreateRegularPolygonGeometry(sizeR, segmentP);
}
else if (type == HyperPrimitiveType.PolygonFan)
{
g = SurfaceComponentGeometries.CreateFanCapGeometry(sizeR, segmentP, segmentY, Rad(cutAngle));
}
else if (type == HyperPrimitiveType.Sphere)
{
g = CircularGeometries.CreateSphereGeometry(sizeR, segmentP, segmentP2, smoothH, smoothV, cutTop, cutBottom);
}
else if (type == HyperPrimitiveType.Cylinder)
{
g = CircularGeometries.CreateCylinderGeometry(sizeR, sizeY, segmentP, segmentY, smoothH, smoothV, Rad(cutAngle), hollowRatio);
}
else if (type == HyperPrimitiveType.Capsule)
{
g = CircularGeometries.CreateCapsuleGeometry(sizeR, sizeY, segmentP, segmentY, segmentP2, smoothH, smoothV);
}
else if (type == HyperPrimitiveType.Cone)
{
g = CircularGeometries.CreateConeGeometry(sizeR, sizeY, segmentP, segmentP2, smoothH, smoothV, cutTop, Rad(cutAngle));
}
else if (type == HyperPrimitiveType.Torus)
{
g = CircularGeometries.CreateTorusGeometry(sizeR, sizeR2, segmentP, segmentP2, smoothH, smoothV, Rad(cutAngle), Rad(angleOffset));
}
else if (type == HyperPrimitiveType.Spring)
{
g = CircularGeometries.CreateSpringGeometry(sizeR, sizeR2, sizeY, segmentP, segmentP2, smoothH, smoothV, Rad(angle), Rad(angleOffset));
}
else if (type == HyperPrimitiveType.Cube)
{
g = PolyhedronGeometries.CreateCubeGeometry(new Vector3(sizeX, sizeY, sizeZ), new int[] { segmentX, segmentY, segmentZ });
}
else if (type == HyperPrimitiveType.CubeStar)
{
g = PolyhedronGeometries.CreateCubeStarGeometry(sizeX, extrusion, cutTop);
}
else if (type == HyperPrimitiveType.CubeFrame)
{
g = PolyhedronGeometries.CreateCubeFrameGeometry(sizeX, ratio);
}
else if (type == HyperPrimitiveType.BuildingBlock)
{
g = PolyhedronGeometries.CreateBuildingBlockGeometry(new Vector3(sizeX, sizeY, sizeZ), new bool[, , ] {
{ { xyz, xyZ }, { xYz, xYZ } }, { { Xyz, XyZ }, { XYz, XYZ } }
});
}
else if (type == HyperPrimitiveType.Tetrahedron)
{
g = PolyhedronGeometries.CreateTetrahedronGeometry(sizeX, segmentX);
}
else if (type == HyperPrimitiveType.TetrahedronStar)
{
g = PolyhedronGeometries.CreateTetrahedronStarGeometry(sizeX, extrusion, cutTop);
}
else if (type == HyperPrimitiveType.Octahedron)
{
g = PolyhedronGeometries.CreateOctahedronGeometry(sizeX, segmentX);
}
else if (type == HyperPrimitiveType.OctahedronStar)
{
g = PolyhedronGeometries.CreateOctahedronStarGeometry(sizeX, extrusion, cutTop);
}
else if (type == HyperPrimitiveType.Dodecahedron)
{
g = PolyhedronGeometries.CreateDodecahedronGeometry(sizeX);
}
else if (type == HyperPrimitiveType.DodecahedronStar)
{
g = PolyhedronGeometries.CreateDodecahedronStarGeometry(sizeX, extrusion, cutTop);
}
else if (type == HyperPrimitiveType.Icosahedron)
{
g = PolyhedronGeometries.CreateIcosahedronGeometry(sizeX, segmentX);
}
else if (type == HyperPrimitiveType.IcosahedronStar)
{
g = PolyhedronGeometries.CreateIcosahedronStarGeometry(sizeX, extrusion, cutTop);
}
else if (type == HyperPrimitiveType.TrunctedTetrahedron)
{
g = PolyhedronGeometries.CreateTetrahedronToTetrahedronTransitionGeometry(sizeX, ratio, cutEdge);
}
else if (type == HyperPrimitiveType.TrunctedCubeOctahedron)
{
g = PolyhedronGeometries.CreateCubeToOctahedronTransitionGeometry(sizeX, ratio, cutEdge);
}
else if (type == HyperPrimitiveType.TrunctedIcosahedronDodecahedron)
{
g = PolyhedronGeometries.CreateIcosahedronToDodecahedronTransitionGeometry(sizeX, ratio, cutEdge);
}
else if (type == HyperPrimitiveType.Ramp)
{
g = RampGeometries.CreateStraightRampGeometry(sizeX, sizeY, sizeZ, segmentX, segmentZ, smoothX, smoothZ, rampType, curvature, extraSizeY, extraSizeX, extraSizeX2);
}
else if (type == HyperPrimitiveType.Test)
{
g = SpecialSurfaceComponentGeometries.CreateSplitTriangleGeometry(1, 1, 0, 3);
}
else
{
g = new RenderGeometry();
}
foreach (HyperModifier modifier in GetComponents <HyperModifier>())
{
modifier.Apply(g);
}
GetComponent <MeshFilter>().sharedMesh = g.ToMesh(surfaceFacing, globalSurfaceType);
currentGeometry = g;
}
public static RenderGeometry CreateCylinderGeometry(float radius, float height, int segmentP, int segmentH, bool smoothH, bool smoothV, float cutAngle = 0, float hollowRatio = 0)
{
StructureGeometry structure = new StructureGeometry();
RenderGeometry.FaceType faceType = GetFaceType(smoothH, smoothV);
float hollowRadius = hollowRatio * radius;
SurfaceComponentGeometry side = SurfaceComponentGeometries.CreateCylinderSideGeometry(radius, height, segmentP, segmentH, cutAngle, false, 1, faceType);
SurfaceComponentGeometry sideInner = null;
if (hollowRatio > 0)
{
sideInner = SurfaceComponentGeometries.CreateCylinderSideGeometry(hollowRadius, height, segmentP, segmentH, cutAngle, true, 1, faceType);
}
SurfaceComponentGeometry upperCap, lowerCap;
if (hollowRatio > 0)
{
upperCap = SurfaceComponentGeometries.CreateRingCapGeometry(radius, hollowRadius, segmentP, 1, cutAngle, 2);
lowerCap = SurfaceComponentGeometries.CreateRingCapGeometry(radius, hollowRadius, segmentP, 1, cutAngle, 2);
}
else if (cutAngle == 0)
{
upperCap = SurfaceComponentGeometries.CreateRegularPolygonGeometry(radius, segmentP, 2);
lowerCap = SurfaceComponentGeometries.CreateRegularPolygonGeometry(radius, segmentP, 2);
}
else
{
upperCap = SurfaceComponentGeometries.CreateFanCapGeometry(radius, segmentP, 1, cutAngle, 2);
lowerCap = SurfaceComponentGeometries.CreateFanCapGeometry(radius, segmentP, 1, cutAngle, 2);
}
lowerCap.ApplyRotation(Quaternion.AngleAxis(cutAngle * Mathf.Rad2Deg, Vector3.up) * Quaternion.AngleAxis(180, Vector3.right));
if (cutAngle == 0)
{
Vertex cornerUp = structure.CreateVertex(new Vector3(radius, height / 2, 0));
Vertex cornerDown = structure.CreateVertex(new Vector3(radius, -height / 2, 0));
if (hollowRatio == 0)
{
structure.CreateFace(side, false, cornerUp, cornerUp, cornerDown, cornerDown);
structure.CreateFace(upperCap, true, cornerUp);
structure.CreateFace(lowerCap, true, cornerDown);
}
else
{
Vertex cornerUpInner = structure.CreateVertex(new Vector3(hollowRadius, height / 2, 0));
Vertex cornerDownInner = structure.CreateVertex(new Vector3(hollowRadius, -height / 2, 0));
structure.CreateFace(side, false, cornerUp, cornerUp, cornerDown, cornerDown);
structure.CreateFace(sideInner, false, cornerDownInner, cornerDownInner, cornerUpInner, cornerUpInner);
structure.CreateFace(upperCap, true, cornerUpInner, cornerUpInner, cornerUp, cornerUp);
structure.CreateFace(lowerCap, true, cornerDownInner, cornerDownInner, cornerDown, cornerDown);
}
}
else
{
SurfaceComponentGeometry wall1 = SurfaceComponentGeometries.CreatePlaneGeometry(1, 1, 1, segmentH, 3);
SurfaceComponentGeometry wall2 = SurfaceComponentGeometries.CreatePlaneGeometry(1, 1, 1, segmentH, 4);
Vertex cornerUp1 = structure.CreateVertex(new Vector3(radius * Mathf.Cos(cutAngle), height / 2, -radius * Mathf.Sin(cutAngle)));
Vertex cornerUp2 = structure.CreateVertex(new Vector3(radius, height / 2, 0));
Vertex cornerDown1 = structure.CreateVertex(new Vector3(radius * Mathf.Cos(cutAngle), -height / 2, -radius * Mathf.Sin(cutAngle)));
Vertex cornerDown2 = structure.CreateVertex(new Vector3(radius, -height / 2, 0));
if (hollowRatio == 0)
{
Vertex cornerUpC = structure.CreateVertex(new Vector3(0, height / 2, 0));
Vertex cornerDownC = structure.CreateVertex(new Vector3(0, -height / 2, 0));
structure.CreateFace(side, false, cornerUp2, cornerUp1, cornerDown1, cornerDown2);
structure.CreateFace(upperCap, true, cornerUp1, cornerUp2, cornerUpC);
structure.CreateFace(lowerCap, true, cornerDown2, cornerDown1, cornerDownC);
structure.CreateFace(wall1, true, cornerUpC, cornerDownC, cornerDown1, cornerUp1);
structure.CreateFace(wall2, true, cornerDownC, cornerUpC, cornerUp2, cornerDown2);
}
else
{
Vertex cornerUp1Inner = structure.CreateVertex(new Vector3(hollowRadius * Mathf.Cos(cutAngle), height / 2, -hollowRadius * Mathf.Sin(cutAngle)));
Vertex cornerUp2Inner = structure.CreateVertex(new Vector3(hollowRadius, height / 2, 0));
Vertex cornerDown1Inner = structure.CreateVertex(new Vector3(hollowRadius * Mathf.Cos(cutAngle), -height / 2, -hollowRadius * Mathf.Sin(cutAngle)));
Vertex cornerDown2Inner = structure.CreateVertex(new Vector3(hollowRadius, -height / 2, 0));
structure.CreateFace(side, false, cornerUp2, cornerUp1, cornerDown1, cornerDown2);
structure.CreateFace(sideInner, false, cornerDown2Inner, cornerDown1Inner, cornerUp1Inner, cornerUp2Inner);
structure.CreateFace(upperCap, true, cornerUp2Inner, cornerUp1Inner, cornerUp1, cornerUp2);
structure.CreateFace(lowerCap, true, cornerDown1Inner, cornerDown2Inner, cornerDown2, cornerDown1);
structure.CreateFace(wall1, true, cornerUp1Inner, cornerDown1Inner, cornerDown1, cornerUp1);
structure.CreateFace(wall2, true, cornerDown2Inner, cornerUp2Inner, cornerUp2, cornerDown2);
}
}
return(structure.Build());
}
public static RenderGeometry CreateDodecahedronGeometry(float size)
{
int currentGroup = 0;
return(CreateDodecahedronGeometryInternal(size, () => SurfaceComponentGeometries.CreateRegularPolygonGeometry(1, 5, currentGroup++, splitBoundary: true)));
}