public void PreBackspace(out bool handledCommand)
{
handledCommand = false;
var caretPos = this.GetCaretPosition();
var snapshot = SubjectBuffer.CurrentSnapshot;
if (caretPos.HasValue && caretPos.Value.Position > 0 && (caretPos.Value.Position - 1) == OpeningPoint.GetPoint(snapshot).Position &&
!HasForwardTyping)
{
using var undo = CreateUndoTransaction();
using var edit = SubjectBuffer.CreateEdit();
var span = new SnapshotSpan(OpeningPoint.GetPoint(snapshot), ClosingPoint.GetPoint(snapshot));
edit.Delete(span);
if (edit.HasFailedChanges)
{
edit.Cancel();
undo.Cancel();
Debug.Fail("Unable to clear braces");
}
else
{
// handle the command so the backspace does
// not go through since we've already cleared the braces
handledCommand = true;
edit.ApplyAndLogExceptions();
undo.Complete();
EndSession();
}
}
}
private void ApplyBraceCompletionResult(BraceCompletionResult result)
{
_threadingContext.ThrowIfNotOnUIThread();
using var edit = SubjectBuffer.CreateEdit();
foreach (var change in result.TextChanges)
{
edit.Replace(change.Span.ToSpan(), change.NewText);
}
edit.ApplyAndLogExceptions();
try
{
Contract.ThrowIfFalse(SubjectBuffer.CurrentSnapshot[OpeningPoint.GetPosition(SubjectBuffer.CurrentSnapshot)] == OpeningBrace,
"The opening point does not match the opening brace character");
Contract.ThrowIfFalse(SubjectBuffer.CurrentSnapshot[ClosingPoint.GetPosition(SubjectBuffer.CurrentSnapshot) - 1] == ClosingBrace,
"The closing point does not match the closing brace character");
}
catch (Exception e) when(FatalError.ReportAndCatch(e))
{
return;
}
var caretLine = SubjectBuffer.CurrentSnapshot.GetLineFromLineNumber(result.CaretLocation.Line);
TextView.TryMoveCaretToAndEnsureVisible(new VirtualSnapshotPoint(caretLine, result.CaretLocation.Character));
}
public void PreOverType(out bool handledCommand)
{
handledCommand = false;
if (ClosingPoint == null)
{
return;
}
// Brace completion is not cancellable.
var cancellationToken = CancellationToken.None;
var snapshot = this.SubjectBuffer.CurrentSnapshot;
var document = snapshot.GetOpenDocumentInCurrentContextWithChanges();
SnapshotPoint closingSnapshotPoint = ClosingPoint.GetPoint(snapshot);
if (!HasForwardTyping && _session.AllowOverType(this, cancellationToken))
{
SnapshotPoint?caretPos = this.GetCaretPosition();
Debug.Assert(caretPos.HasValue && caretPos.Value.Position < closingSnapshotPoint.Position);
// ensure that we are within the session before clearing
if (caretPos.HasValue && caretPos.Value.Position < closingSnapshotPoint.Position && closingSnapshotPoint.Position > 0)
{
using (ITextUndoTransaction undo = CreateUndoTransaction())
{
_editorOperations.AddBeforeTextBufferChangePrimitive();
SnapshotSpan span = new SnapshotSpan(caretPos.Value, closingSnapshotPoint.Subtract(1));
using (ITextEdit edit = SubjectBuffer.CreateEdit())
{
edit.Delete(span);
if (edit.HasFailedChanges)
{
Debug.Fail("Unable to clear closing brace");
edit.Cancel();
undo.Cancel();
}
else
{
handledCommand = true;
edit.Apply();
MoveCaretToClosingPoint();
_editorOperations.AddAfterTextBufferChangePrimitive();
undo.Complete();
}
}
}
}
}
}
public void PreBackspace(out bool handledCommand)
{
handledCommand = false;
SnapshotPoint?caretPos = CaretPosition;
ITextSnapshot snapshot = SubjectBuffer.CurrentSnapshot;
if (caretPos.HasValue && caretPos.Value.Position > 0 && (caretPos.Value.Position - 1) == _openingPoint.GetPoint(snapshot).Position &&
!HasForwardTyping)
{
using (ITextUndoTransaction undo = CreateUndoTransaction())
{
using (ITextEdit edit = SubjectBuffer.CreateEdit())
{
SnapshotSpan span = new SnapshotSpan(_openingPoint.GetPoint(snapshot), _closingPoint.GetPoint(snapshot));
edit.Delete(span);
if (edit.HasFailedChanges)
{
edit.Cancel();
undo.Cancel();
Debug.Fail("Unable to clear braces");
// just let this backspace proceed normally
}
else
{
// handle the command so the backspace does
// not go through since we've already cleared the braces
handledCommand = true;
edit.Apply();
undo.Complete();
EndSession();
}
}
}
}
}
private void Start(CancellationToken cancellationToken)
{
// this is where the caret should go after the change
SnapshotPoint pos = TextView.Caret.Position.BufferPosition;
ITrackingPoint beforeTrackingPoint = pos.Snapshot.CreateTrackingPoint(pos.Position, PointTrackingMode.Negative);
ITextSnapshot snapshot = SubjectBuffer.CurrentSnapshot;
SnapshotPoint closingSnapshotPoint = ClosingPoint.GetPoint(snapshot);
if (closingSnapshotPoint.Position < 1)
{
Debug.Fail("The closing point was not found at the expected position.");
EndSession();
return;
}
SnapshotPoint openingSnapshotPoint = closingSnapshotPoint.Subtract(1);
if (openingSnapshotPoint.GetChar() != OpeningBrace)
{
// there is a bug in editor brace completion engine on projection buffer that already fixed in vs_pro. until that is FIed to use
// I will make this not to assert
// Debug.Fail("The opening brace was not found at the expected position.");
EndSession();
return;
}
OpeningPoint = snapshot.CreateTrackingPoint(openingSnapshotPoint, PointTrackingMode.Positive);
var document = snapshot.GetOpenDocumentInCurrentContextWithChanges();
if (!_session.CheckOpeningPoint(this, cancellationToken))
{
EndSession();
return;
}
using (ITextUndoTransaction undo = CreateUndoTransaction())
{
// insert the closing brace
using (ITextEdit edit = SubjectBuffer.CreateEdit())
{
edit.Insert(closingSnapshotPoint, ClosingBrace.ToString());
if (edit.HasFailedChanges)
{
Debug.Fail("Unable to insert closing brace");
// exit without setting the closing point which will take us off the stack
edit.Cancel();
undo.Cancel();
return;
}
else
{
snapshot = edit.Apply();
}
}
SnapshotPoint beforePoint = beforeTrackingPoint.GetPoint(TextView.TextSnapshot);
// switch from positive to negative tracking so it stays against the closing brace
ClosingPoint = SubjectBuffer.CurrentSnapshot.CreateTrackingPoint(ClosingPoint.GetPoint(snapshot), PointTrackingMode.Negative);
Debug.Assert(ClosingPoint.GetPoint(snapshot).Position > 0 && (new SnapshotSpan(ClosingPoint.GetPoint(snapshot).Subtract(1), 1))
.GetText().Equals(ClosingBrace.ToString()), "The closing point does not match the closing brace character");
// move the caret back between the braces
TextView.Caret.MoveTo(beforePoint);
_session.AfterStart(this, cancellationToken);
undo.Complete();
}
}
public void PreOverType(out bool handledCommand)
{
_threadingContext.ThrowIfNotOnUIThread();
handledCommand = false;
if (ClosingPoint == null)
{
return;
}
// Brace completion is not cancellable.
var cancellationToken = CancellationToken.None;
var snapshot = this.SubjectBuffer.CurrentSnapshot;
var closingSnapshotPoint = ClosingPoint.GetPoint(snapshot);
if (!HasForwardTyping && AllowOverType())
{
var caretPos = this.GetCaretPosition();
Debug.Assert(caretPos.HasValue && caretPos.Value.Position < closingSnapshotPoint.Position);
// ensure that we are within the session before clearing
if (caretPos.HasValue && caretPos.Value.Position < closingSnapshotPoint.Position && closingSnapshotPoint.Position > 0)
{
using var undo = CreateUndoTransaction();
_editorOperations.AddBeforeTextBufferChangePrimitive();
var span = new SnapshotSpan(caretPos.Value, closingSnapshotPoint.Subtract(1));
using var edit = SubjectBuffer.CreateEdit();
edit.Delete(span);
if (edit.HasFailedChanges)
{
Debug.Fail("Unable to clear closing brace");
edit.Cancel();
undo.Cancel();
}
else
{
handledCommand = true;
edit.ApplyAndLogExceptions();
MoveCaretToClosingPoint();
_editorOperations.AddAfterTextBufferChangePrimitive();
undo.Complete();
}
}
}
return;
bool AllowOverType()
{
var context = GetBraceCompletionContext();
return(context != null && _service.AllowOverTypeAsync(context.Value, cancellationToken).WaitAndGetResult(cancellationToken));
}
}
