private MechanismBase MakeRodRopeOrSpring(Stroke stroke, RigidBodyBase headbody, RigidBodyBase tailbody)
{
// Rod, Rope, or Spring: we decide based on straightness, curvyness, and loopiness.
int np = stroke.PacketCount;
Point head = stroke.GetPoint(0), tail = stroke.GetPoint(np - 1);
double distance = Geometry.DistanceBetween(head, tail);
StrokeGeometry sg = new StrokeGeometry(stroke);
double length = sg.IntegrateLength();
// Consider spring: analyze total net curvature of the stroke, and call it a
// spring if it makes at least 540 degrees (1.5 loops) in the same direction.
double tt = StrokeAnalyzer.AnalyzeTotalCurvature(stroke, 100.0);
if (Math.Abs(Geometry.Rad2Deg(tt)) > 540.0)
{
dbg.WriteLine("new SpringMech");
SpringMech newmech = new SpringMech();
newmech.EndpointA = BodyRef.For(headbody, head);
newmech.EndpointB = BodyRef.For(tailbody, tail);
newmech.extension = distance;
newmech.stiffness = MathEx.Square(tt) / 100; //Heuristic: th²/100 feels about right.
newmech.strokeid = stroke.Id;
doc.Mechanisms.Add(newmech);
return(newmech);
}
// Straight and narrow?
double rodropethreshold = 1.1; //heuristic
if (length / distance < rodropethreshold)
{
dbg.WriteLine("new RodMech");
RodMech newmech = new RodMech();
newmech.EndpointA = BodyRef.For(headbody, head);
newmech.EndpointB = BodyRef.For(tailbody, tail);
newmech.length = distance;
newmech.strokeid = stroke.Id;
doc.Mechanisms.Add(newmech);
return(newmech);
}
else
{
dbg.WriteLine("new RopeMech");
RopeMech newmech = new RopeMech();
newmech.EndpointA = BodyRef.For(headbody, head);
newmech.EndpointB = BodyRef.For(tailbody, tail);
newmech.length = length;
newmech.strokeid = stroke.Id;
doc.Mechanisms.Add(newmech);
return(newmech);
}
}
static MagicDocument CreateDocumentFixture()
{
MagicDocument doc = new MagicDocument();
RigidBodyBase body;
body = new EllipticalBody();
body.strokeid = 1;
doc.Bodies.Add(body);
body = new EllipticalBody();
body.strokeid = 2;
doc.Bodies.Add(body);
body = new PolygonalBody();
body.strokeid = 3;
doc.Bodies.Add(body);
((PolygonalBody)body).Vertices = new Point[] {
new Point(120, 340),
new Point(560, 340),
new Point(560, 780),
new Point(120, 780)
};
BindingMechanismBase mech;
mech = new RodMech();
mech.EndpointA = BodyRef.For((RigidBodyBase)doc.Bodies[0], Point.Empty);
mech.EndpointB = BodyRef.For((RigidBodyBase)doc.Bodies[1], Point.Empty);
doc.Mechanisms.Add(mech);
mech = new RopeMech();
mech.EndpointA = BodyRef.For((RigidBodyBase)doc.Bodies[1], Point.Empty);
mech.EndpointB = BodyRef.For((RigidBodyBase)doc.Bodies[2], Point.Empty);
doc.Mechanisms.Add(mech);
mech = new SpringMech();
mech.EndpointA = BodyRef.For((RigidBodyBase)doc.Bodies[2], Point.Empty);
mech.EndpointB = BodyRef.For((RigidBodyBase)doc.Bodies[0], Point.Empty);
doc.Mechanisms.Add(mech);
return(doc);
}
private MechanismBase MakeRodRopeOrSpring(Stroke stroke, RigidBodyBase headbody, RigidBodyBase tailbody)
{
// Rod, Rope, or Spring: we decide based on straightness, curvyness, and loopiness.
int np = stroke.PacketCount;
Point head = stroke.GetPoint(0), tail = stroke.GetPoint(np-1);
double distance = Geometry.DistanceBetween(head,tail);
StrokeGeometry sg = new StrokeGeometry(stroke);
double length = sg.IntegrateLength();
// Consider spring: analyze total net curvature of the stroke, and call it a
// spring if it makes at least 540 degrees (1.5 loops) in the same direction.
double tt = StrokeAnalyzer.AnalyzeTotalCurvature(stroke,100.0);
if (Math.Abs(Geometry.Rad2Deg(tt)) > 540.0)
{
dbg.WriteLine("new SpringMech");
SpringMech newmech = new SpringMech();
newmech.EndpointA = BodyRef.For(headbody,head);
newmech.EndpointB = BodyRef.For(tailbody,tail);
newmech.extension = distance;
newmech.stiffness = MathEx.Square(tt)/100; //Heuristic: th²/100 feels about right.
newmech.strokeid = stroke.Id;
doc.Mechanisms.Add(newmech);
return newmech;
}
// Straight and narrow?
double rodropethreshold = 1.1; //heuristic
if (length/distance < rodropethreshold)
{
dbg.WriteLine("new RodMech");
RodMech newmech = new RodMech();
newmech.EndpointA = BodyRef.For(headbody,head);
newmech.EndpointB = BodyRef.For(tailbody,tail);
newmech.length = distance;
newmech.strokeid = stroke.Id;
doc.Mechanisms.Add(newmech);
return newmech;
}
else
{
dbg.WriteLine("new RopeMech");
RopeMech newmech = new RopeMech();
newmech.EndpointA = BodyRef.For(headbody,head);
newmech.EndpointB = BodyRef.For(tailbody,tail);
newmech.length = length;
newmech.strokeid = stroke.Id;
doc.Mechanisms.Add(newmech);
return newmech;
}
}
static MagicDocument CreateDocumentFixture()
{
MagicDocument doc = new MagicDocument();
RigidBodyBase body;
body = new EllipticalBody();
body.strokeid = 1;
doc.Bodies.Add(body);
body = new EllipticalBody();
body.strokeid = 2;
doc.Bodies.Add(body);
body = new PolygonalBody();
body.strokeid = 3;
doc.Bodies.Add(body);
((PolygonalBody)body).Vertices = new Point[] {
new Point(120,340),
new Point(560,340),
new Point(560,780),
new Point(120,780)
};
BindingMechanismBase mech;
mech = new RodMech();
mech.EndpointA = BodyRef.For((RigidBodyBase)doc.Bodies[0],Point.Empty);
mech.EndpointB = BodyRef.For((RigidBodyBase)doc.Bodies[1],Point.Empty);
doc.Mechanisms.Add(mech);
mech = new RopeMech();
mech.EndpointA = BodyRef.For((RigidBodyBase)doc.Bodies[1],Point.Empty);
mech.EndpointB = BodyRef.For((RigidBodyBase)doc.Bodies[2],Point.Empty);
doc.Mechanisms.Add(mech);
mech = new SpringMech();
mech.EndpointA = BodyRef.For((RigidBodyBase)doc.Bodies[2],Point.Empty);
mech.EndpointB = BodyRef.For((RigidBodyBase)doc.Bodies[0],Point.Empty);
doc.Mechanisms.Add(mech);
return doc;
}
