static void CreateFaceRotateByGeometry(SolidEdgePart.PartDocument partDocument)
{
SolidEdgePart.Models models = null;
SolidEdgePart.Model model = null;
SolidEdgeGeometry.Body body = null;
SolidEdgePart.FaceRotates faceRotates = null;
SolidEdgePart.FaceRotate faceRotate = null;
SolidEdgeGeometry.Faces faces = null;
SolidEdgeGeometry.Face face = null;
SolidEdgeGeometry.Edges edges = null;
SolidEdgeGeometry.Edge edge = null;
double angle = 0.5;
// Get a reference to the models collection.
models = partDocument.Models;
model = models.Item(1);
body = (SolidEdgeGeometry.Body)model.Body;
faces = (SolidEdgeGeometry.Faces)body.Faces[SolidEdgeGeometry.FeatureTopologyQueryTypeConstants.igQueryAll];
face = (SolidEdgeGeometry.Face)faces.Item(2);
edges = (SolidEdgeGeometry.Edges)body.Edges[SolidEdgeGeometry.FeatureTopologyQueryTypeConstants.igQueryAll];
edge = (SolidEdgeGeometry.Edge)edges.Item(5);
faceRotates = model.FaceRotates;
// Add face rotate.
faceRotate = faceRotates.Add(
face,
SolidEdgePart.FaceRotateConstants.igFaceRotateByGeometry,
SolidEdgePart.FaceRotateConstants.igFaceRotateRecreateBlends,
null,
null,
edge,
SolidEdgePart.FaceRotateConstants.igFaceRotateAxisEnd,
angle);
}
static void CreateFaceRotateByPoints(SolidEdgePart.PartDocument partDocument)
{
SolidEdgePart.Models models = null;
SolidEdgePart.Model model = null;
SolidEdgeGeometry.Body body = null;
SolidEdgePart.FaceRotates faceRotates = null;
SolidEdgePart.FaceRotate faceRotate = null;
SolidEdgeGeometry.Faces faces = null;
SolidEdgeGeometry.Face face = null;
SolidEdgeGeometry.Vertices vertices = null;
SolidEdgeGeometry.Vertex point1 = null;
SolidEdgeGeometry.Vertex point2 = null;
double angle = 0.0872664625997165;
// Get a reference to the models collection.
models = partDocument.Models;
model = models.Item(1);
body = (SolidEdgeGeometry.Body)model.Body;
faces = (SolidEdgeGeometry.Faces)body.Faces[SolidEdgeGeometry.FeatureTopologyQueryTypeConstants.igQueryAll];
face = (SolidEdgeGeometry.Face)faces.Item(1);
vertices = (SolidEdgeGeometry.Vertices)face.Vertices;
point1 = (SolidEdgeGeometry.Vertex)vertices.Item(1);
point2 = (SolidEdgeGeometry.Vertex)vertices.Item(2);
faceRotates = model.FaceRotates;
// Add face rotate.
faceRotate = faceRotates.Add(
face,
SolidEdgePart.FaceRotateConstants.igFaceRotateByPoints,
SolidEdgePart.FaceRotateConstants.igFaceRotateRecreateBlends,
point1,
point2,
null,
SolidEdgePart.FaceRotateConstants.igFaceRotateNone,
angle);
}
static void Main(string[] args)
{
SolidEdgeFramework.Application application = null;
SolidEdgeFramework.Documents documents = null;
SolidEdgePart.PartDocument partDocument = null;
SolidEdgePart.RefPlanes refPlanes = null;
SolidEdgePart.RefPlane refPlane = null;
SolidEdgePart.ProfileSets profileSets = null;
SolidEdgePart.ProfileSet profileSet = null;
SolidEdgePart.Profiles profiles = null;
SolidEdgePart.Profile profile = null;
SolidEdgeFrameworkSupport.Lines2d lines2d = null;
SolidEdgeFrameworkSupport.Line2d line2d = null;
SolidEdgeFrameworkSupport.Relations2d relations2d = null;
SolidEdgeFrameworkSupport.Relation2d relation2d = null;
SolidEdgePart.Models models = null;
SolidEdgePart.Model model = null;
List <SolidEdgePart.Profile> profileList = new List <SolidEdgePart.Profile>();
int status = 0;
SolidEdgePart.ExtrudedProtrusions extrudedProtrusions = null;
SolidEdgePart.ExtrudedProtrusion extrudedProtrusion = null;
SolidEdgeGeometry.Edges edges = null;
List <object> edgeList = new List <object>();
SolidEdgeGeometry.Faces faces = null;
SolidEdgePart.Chamfers chamfers = null;
SolidEdgePart.Chamfer chamfer = null;
try
{
// Register with OLE to handle concurrency issues on the current thread.
SolidEdgeCommunity.OleMessageFilter.Register();
// Connect to or start Solid Edge.
application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true);
// Bring Solid Edge to the foreground.
application.Activate();
// Get a reference to the documents collection.
documents = application.Documents;
// Create a new part document.
partDocument = documents.AddPartDocument();
// Always a good idea to give SE a chance to breathe.
application.DoIdle();
refPlanes = partDocument.RefPlanes;
refPlane = refPlanes.Item(1);
profileSets = partDocument.ProfileSets;
profileSet = profileSets.Add();
profiles = profileSet.Profiles;
profile = profiles.Add(refPlane);
profileList.Add(profile);
lines2d = profile.Lines2d;
line2d = lines2d.AddBy2Points(0, 0, 0.06, 0);
line2d = lines2d.AddBy2Points(0.06, 0, 0.06, 0.06);
line2d = lines2d.AddBy2Points(0.06, 0.06, 0, 0.06);
line2d = lines2d.AddBy2Points(0, 0.06, 0, 0);
relations2d = (SolidEdgeFrameworkSupport.Relations2d)profile.Relations2d;
relation2d = relations2d.AddKeypoint(
Object1: lines2d.Item(1),
Index1: (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd,
Object2: lines2d.Item(2),
Index2: (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart);
relation2d = relations2d.AddKeypoint(
Object1: lines2d.Item(2),
Index1: (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd,
Object2: lines2d.Item(3),
Index2: (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart);
relation2d = relations2d.AddKeypoint(
Object1: lines2d.Item(3),
Index1: (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd,
Object2: lines2d.Item(4),
Index2: (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart);
relation2d = relations2d.AddKeypoint(
Object1: lines2d.Item(4),
Index1: (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd,
Object2: lines2d.Item(1),
Index2: (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart);
// Make sure profile is closed.
status = profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);
if (status != 0)
{
throw new System.Exception("Profile not closed.");
}
models = partDocument.Models;
model = models.AddFiniteExtrudedProtrusion(
NumberOfProfiles: profileList.Count,
ProfileArray: profileList.ToArray(),
ProfilePlaneSide: SolidEdgePart.FeaturePropertyConstants.igRight,
ExtrusionDistance: 0.02);
profile.Visible = false;
extrudedProtrusions = model.ExtrudedProtrusions;
extrudedProtrusion = extrudedProtrusions.Item(1);
//edges = (SolidEdgeGeometry.Edges)extrudedProtrusion.get_Edges(
// SolidEdgeGeometry.FeatureTopologyQueryTypeConstants.igQueryAll);
//edgeList.Add(edges.Item(5));
//edgeList.Add(edges.Item(8));
faces = (SolidEdgeGeometry.Faces)
extrudedProtrusion.get_Faces(SolidEdgeGeometry.FeatureTopologyQueryTypeConstants.igQueryAll);
chamfers = model.Chamfers;
SolidEdgeGeometry.Face face = (SolidEdgeGeometry.Face)faces.Item(1);
double setbackDistance1 = 0.009;
double setbackDistance2 = 0.001;
edges = (SolidEdgeGeometry.Edges)face.Edges;
edgeList.Add(edges.Item(1));
chamfer = chamfers.AddUnequalSetback(
ReferenceFace: face,
NumberOfEdgeSets: edgeList.Count,
EdgeSetArray: edgeList.ToArray(),
SetbackDistance1: setbackDistance1,
SetbackDistance2: setbackDistance2);
// Switch to ISO view.
application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView);
}
catch (System.Exception ex)
{
Console.WriteLine(ex.Message);
}
finally
{
SolidEdgeCommunity.OleMessageFilter.Unregister();
}
}
static void Main(string[] args)
{
SolidEdgeFramework.Application application = null;
SolidEdgeFramework.Documents documents = null;
SolidEdgePart.PartDocument partDocument = null;
SolidEdgePart.RefPlanes refPlanes = null;
SolidEdgePart.RefPlane refPlane = null;
SolidEdgePart.Models models = null;
SolidEdgePart.Model model = null;
SolidEdgeGeometry.Body body = null;
SolidEdgePart.FaceRotates faceRotates = null;
SolidEdgePart.FaceRotate faceRotate = null;
SolidEdgeGeometry.Faces faces = null;
SolidEdgeGeometry.Face face = null;
SolidEdgeGeometry.Vertices vertices = null;
SolidEdgeGeometry.Vertex point1 = null;
SolidEdgeGeometry.Vertex point2 = null;
SolidEdgeFramework.SelectSet selectSet = null;
double angle = 0.0872664625997165;
try
{
// Register with OLE to handle concurrency issues on the current thread.
SolidEdgeCommunity.OleMessageFilter.Register();
// Connect to or start Solid Edge.
application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true);
// Get a reference to the Documents collection.
documents = application.Documents;
// Create a new part document.
partDocument = documents.AddPartDocument();
// Get a reference to the RefPlanes collection.
refPlanes = partDocument.RefPlanes;
// Get a reference to a RefPlane.
refPlane = refPlanes.GetFrontPlane();
// Always a good idea to give SE a chance to breathe.
application.DoIdle();
List <double[]> linesArray = new List <double[]>();
linesArray.Add(new double[] { 0, 0, 0.08, 0 });
linesArray.Add(new double[] { 0.08, 0, 0.08, 0.06 });
linesArray.Add(new double[] { 0.08, 0.06, 0.064, 0.06 });
linesArray.Add(new double[] { 0.064, 0.06, 0.064, 0.02 });
linesArray.Add(new double[] { 0.064, 0.02, 0.048, 0.02 });
linesArray.Add(new double[] { 0.048, 0.02, 0.048, 0.06 });
linesArray.Add(new double[] { 0.048, 0.06, 0.032, 0.06 });
linesArray.Add(new double[] { 0.032, 0.06, 0.032, 0.02 });
linesArray.Add(new double[] { 0.032, 0.02, 0.016, 0.02 });
linesArray.Add(new double[] { 0.016, 0.02, 0.016, 0.06 });
linesArray.Add(new double[] { 0.016, 0.06, 0, 0.06 });
linesArray.Add(new double[] { 0, 0.06, 0, 0 });
// Call helper method to create the actual geometry.
PartHelper.CreateFiniteExtrudedProtrusion(partDocument, refPlane, linesArray.ToArray(), SolidEdgePart.FeaturePropertyConstants.igRight, 0.005);
// Get a reference to the models collection.
models = partDocument.Models;
model = models.Item(1);
body = (SolidEdgeGeometry.Body)model.Body;
faces = (SolidEdgeGeometry.Faces)body.Faces[SolidEdgeGeometry.FeatureTopologyQueryTypeConstants.igQueryAll];
face = (SolidEdgeGeometry.Face)faces.Item(1);
vertices = (SolidEdgeGeometry.Vertices)face.Vertices;
point1 = (SolidEdgeGeometry.Vertex)vertices.Item(1);
point2 = (SolidEdgeGeometry.Vertex)vertices.Item(2);
faceRotates = model.FaceRotates;
// Add face rotate.
faceRotate = faceRotates.Add(
face,
SolidEdgePart.FaceRotateConstants.igFaceRotateByPoints,
SolidEdgePart.FaceRotateConstants.igFaceRotateRecreateBlends,
point1,
point2,
null,
SolidEdgePart.FaceRotateConstants.igFaceRotateNone,
angle);
// Get a reference to the ActiveSelectSet.
selectSet = application.ActiveSelectSet;
// Empty ActiveSelectSet.
selectSet.RemoveAll();
// Add new FaceRotate to ActiveSelectSet.
selectSet.Add(faceRotate);
// Switch to ISO view.
application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView);
}
catch (System.Exception ex)
{
Console.WriteLine(ex.Message);
}
finally
{
SolidEdgeCommunity.OleMessageFilter.Unregister();
}
}
static void Main(string[] args)
{
SolidEdgeFramework.Application application = null;
SolidEdgeFramework.Documents documents = null;
SolidEdgePart.PartDocument partDocument = null;
SolidEdgePart.RefPlanes refPlanes = null;
SolidEdgePart.RefPlane refPlane = null;
SolidEdgePart.Models models = null;
SolidEdgePart.Model model = null;
SolidEdgeGeometry.Body body = null;
SolidEdgeGeometry.Faces faces = null;
SolidEdgeGeometry.Face face = null;
SolidEdgePart.Thickens thickens = null;
SolidEdgePart.Thicken thicken = null;
try
{
// Register with OLE to handle concurrency issues on the current thread.
SolidEdgeCommunity.OleMessageFilter.Register();
// Connect to or start Solid Edge.
application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true);
// Get a reference to the documents collection.
documents = application.Documents;
// Add a new part document.
partDocument = documents.AddPartDocument();
// Always a good idea to give SE a chance to breathe.
application.DoIdle();
// Get a reference to the RefPlanes collection.
refPlanes = partDocument.RefPlanes;
// Get a reference to a RefPlane.
refPlane = refPlanes.GetFrontPlane();
List <double[]> linesArray = new List <double[]>();
linesArray.Add(new double[] { 0, 0, 0.08, 0 });
linesArray.Add(new double[] { 0.08, 0, 0.08, 0.06 });
linesArray.Add(new double[] { 0.08, 0.06, 0.064, 0.06 });
linesArray.Add(new double[] { 0.064, 0.06, 0.064, 0.02 });
linesArray.Add(new double[] { 0.064, 0.02, 0.048, 0.02 });
linesArray.Add(new double[] { 0.048, 0.02, 0.048, 0.06 });
linesArray.Add(new double[] { 0.048, 0.06, 0.032, 0.06 });
linesArray.Add(new double[] { 0.032, 0.06, 0.032, 0.02 });
linesArray.Add(new double[] { 0.032, 0.02, 0.016, 0.02 });
linesArray.Add(new double[] { 0.016, 0.02, 0.016, 0.06 });
linesArray.Add(new double[] { 0.016, 0.06, 0, 0.06 });
linesArray.Add(new double[] { 0, 0.06, 0, 0 });
// Get a reference to the models collection.
models = partDocument.Models;
// Call helper method to create the actual geometry.
model = PartHelper.CreateFiniteExtrudedProtrusion(partDocument, refPlane, linesArray.ToArray(), SolidEdgePart.FeaturePropertyConstants.igRight, 0.005);
body = (SolidEdgeGeometry.Body)model.Body;
faces = (SolidEdgeGeometry.Faces)body.Faces[SolidEdgeGeometry.FeatureTopologyQueryTypeConstants.igQueryAll];
thickens = model.Thickens;
Type type = typeof(SolidEdgePart.FeaturePropertyConstants);
var fields = type.GetFields();
for (int i = 1; i <= faces.Count; i++)
{
model = models.Item(1);
body = (SolidEdgeGeometry.Body)model.Body;
faces = (SolidEdgeGeometry.Faces)body.Faces[SolidEdgeGeometry.FeatureTopologyQueryTypeConstants.igQueryAll];
thickens = model.Thickens;
face = faces.Item(i) as SolidEdgeGeometry.Face;
Array facesArray = Array.CreateInstance(typeof(SolidEdgeGeometry.Face), 1);
facesArray.SetValue(face, 0);
foreach (var field in fields)
{
if (field.IsSpecialName)
{
continue;
}
SolidEdgePart.FeaturePropertyConstants side = (SolidEdgePart.FeaturePropertyConstants)field.GetRawConstantValue();
try
{
thicken = thickens.Add(side, 0.0254, 1, ref facesArray);
thicken.Delete();
break;
}
catch
{
}
}
//thicken = thickens.Add(SolidEdgePart.FeaturePropertyConstants.igReverseNormalSideDummy, 0.0254, 1, ref facesArray);
//selectSet = application.ActiveSelectSet;
//selectSet.RemoveAll();
//selectSet.Add(faces.Item(1));
}
}
catch (System.Exception ex)
{
Console.WriteLine(ex.Message);
}
finally
{
SolidEdgeCommunity.OleMessageFilter.Unregister();
}
}