public void ErzeugeBlock(Zahnrad Zahnrad1, Reference refVerbindung, ShapeFactory sf1)
{
hsp_catiaPart.Part.InWorkObject = hsp_catiaPart.Part.MainBody;
Pad catPad1 = sf1.AddNewPadFromRef(refVerbindung, Zahnrad1.b);
catPad1.set_Name("Block");
hsp_catiaPart.Part.Update();
}
public void ErzeugedenNeuenBlock(Reference refVerbindung, ShapeFactory sf1, Data dat)
{
hsp_catiaPart.Part.InWorkObject = hsp_catiaPart.Part.MainBody;
Pad catPad1 = sf1.AddNewPadFromRef(refVerbindung, dat.getBreite());
hsp_catiaPart.Part.Update();
}
internal void ErzeugeZylinder(Schraube arr)
{
//Referenz für den Volumenkörper aus Skizze übernehmen
Reference RefMySchaft = part_Schraube.CreateReferenceFromObject(hsp_catiaSkizze);
//Volumenkörper erstellen
schaft = shapefac.AddNewPadFromRef(RefMySchaft, Convert.ToDouble(arr.laenge));
schaft.set_Name("Zylinder");
hsp_catiaPartDoc.Part.Update();
hsp_catiaPartDoc.Part.Update();
}
public void ErzeugeKreismusterAußenverzahnung(Data dat)
{
ShapeFactory SF = (ShapeFactory)hsp_catiaPart.Part.ShapeFactory;
HybridShapeFactory HSF = (HybridShapeFactory)hsp_catiaPart.Part.HybridShapeFactory;
//Skizze und Referenzen
Factory2D Factory2D1 = hsp_catiaProfil.Factory2D;
HybridShapePointCoord Ursprung = HSF.AddNewPointCoord(0, 0, 0);
Reference RefUrsprung = hsp_catiaPart.Part.CreateReferenceFromObject(Ursprung);
HybridShapeDirection XDir = HSF.AddNewDirectionByCoord(1, 0, 0);
Reference RefXDir = hsp_catiaPart.Part.CreateReferenceFromObject(XDir);
//Kreismuster mit Daten füllen
CircPattern Kreismuster = SF.AddNewSurfacicCircPattern(Factory2D1, 1, 2, 0, 0, 1, 1, RefUrsprung, RefXDir, false, 0, true, false);
Kreismuster.CircularPatternParameters = CatCircularPatternParameters.catInstancesandAngularSpacing;
AngularRepartition angularRepartition1 = Kreismuster.AngularRepartition;
Angle angle1 = angularRepartition1.AngularSpacing;
angle1.Value = Convert.ToDouble(360 / dat.getZaehnezahlZahnrad1());
AngularRepartition angularRepartition2 = Kreismuster.AngularRepartition;
IntParam intParam1 = angularRepartition2.InstancesCount;
intParam1.Value = Convert.ToInt32(dat.getZaehnezahlZahnrad1()) + 1;
//geschlossene Kontur
Reference Ref_Kreismuster = hsp_catiaPart.Part.CreateReferenceFromObject(Kreismuster);
HybridShapeAssemble Verbindung = HSF.AddNewJoin(Ref_Kreismuster, Ref_Kreismuster);
Reference Ref_Verbindung = hsp_catiaPart.Part.CreateReferenceFromObject(Verbindung);
HSF.GSMVisibility(Ref_Verbindung, 0);
hsp_catiaPart.Part.Update();
Bodies bodies = hsp_catiaPart.Part.Bodies;
Body myBody = bodies.Add();
myBody.set_Name("Zahnrad");
myBody.InsertHybridShape(Verbindung);
hsp_catiaPart.Part.Update();
//Erzeuge Block aus Skizze
hsp_catiaPart.Part.InWorkObject = myBody;
Pad myPad = SF.AddNewPadFromRef(Ref_Verbindung, dat.getBreiteZahnrad1());
hsp_catiaPart.Part.Update();
}
public void ErzeugeZahnrad(int Zaehnezahl, double Dicke, double Modul)
{
ShapeFactory SF = (ShapeFactory)hsp_catiaPart.Part.ShapeFactory;
HybridShapeFactory HSF = (HybridShapeFactory)hsp_catiaPart.Part.HybridShapeFactory; Part myPart = hsp_catiaPart.Part;
Factory2D Factory2D1 = hsp_catiaProfil.Factory2D;
HybridShapePointCoord Ursprung = HSF.AddNewPointCoord(0, 0, 0);
Reference RefUrsprung = myPart.CreateReferenceFromObject(Ursprung);
HybridShapeDirection XDir = HSF.AddNewDirectionByCoord(1, 0, 0);
Reference RefXDir = myPart.CreateReferenceFromObject(XDir);
CircPattern Kreismuster = SF.AddNewSurfacicCircPattern(Factory2D1, 1, 2, 0, 0, 1, 1, RefUrsprung, RefXDir, false, 0, true, false);
Kreismuster.CircularPatternParameters = CatCircularPatternParameters.catInstancesandAngularSpacing;
AngularRepartition angularRepartition1 = Kreismuster.AngularRepartition;
Angle angle1 = angularRepartition1.AngularSpacing;
angle1.Value = Convert.ToDouble(360 / Convert.ToDouble(Zaehnezahl));
AngularRepartition angularRepartition2 = Kreismuster.AngularRepartition;
IntParam intParam1 = angularRepartition2.InstancesCount;
intParam1.Value = Convert.ToInt32(Zaehnezahl) + 1;
Reference Ref_Kreismuster = myPart.CreateReferenceFromObject(Kreismuster);
HybridShapeAssemble Verbindung = HSF.AddNewJoin(Ref_Kreismuster, Ref_Kreismuster); Reference Ref_Verbindung = myPart.CreateReferenceFromObject(Verbindung);
HSF.GSMVisibility(Ref_Verbindung, 0);
myPart.Update();
Bodies bodies = myPart.Bodies;
Body myBody = bodies.Add();
myBody.set_Name("Zahnrad");
myBody.InsertHybridShape(Verbindung);
myPart.Update();
myPart.InWorkObject = myBody;
Pad myPad = SF.AddNewPadFromRef(Ref_Verbindung, Dicke);
myPart.Update();
}
public void Stirnzahnrad(MainWindow.Außenverzahnung av)
{
//Profil Erstellen
//Nullpunkt
double x0 = 0;
double y0 = 0;
//Hilfsgrößen
double Teilkreisradius = av.d / 2;
double Hilfskreisradius = Teilkreisradius * 0.94;
double Fußkreisradius = Teilkreisradius - (1.25 * av.m);
double Kopfkreisradius = Teilkreisradius + av.m;
double Verrundungsradius = 0.35 * av.m;
double Alpha = 2;
double Alpharad = Math.PI * Alpha / 180;
double Beta = 140 / av.z;
double Betarad = Math.PI * Beta / 180;
double Gamma = 90 - (Alpha - Beta);
double Gammarad = Math.PI * Gamma / 180;
double Totalangel = 360.0 / av.z;
double Totalangelrad = Math.PI * Totalangel / 180;
//Punkte
//Kopfkreis
double xKopfkreis = -Kopfkreisradius *Math.Sin(Alpharad);
double yKopfkreis = Kopfkreisradius * Math.Cos(Alpharad);
//Fußkreis
double xFußkreis = -Fußkreisradius *Math.Sin(Betarad);
double yFußkreis = Fußkreisradius * Math.Cos(Betarad);
//Koordinaten Anfangspunkt Fußkreis
double Hilfswinkel = Totalangelrad - Math.Atan(Math.Abs(xFußkreis) / Math.Abs(yFußkreis));
double x_AnfangspunktFußkreis = Fußkreisradius * Math.Sin(Hilfswinkel);
double y_AnfangspunktFußkreis = Fußkreisradius * Math.Cos(Hilfswinkel);
//Skizze umbenennen und öffnen
hsp_catiaProfil.set_Name("Zahnradskizze");
Factory2D catfactory2D1 = hsp_catiaProfil.OpenEdition();
//Nun die Punkte in die Skizze
Point2D point_Ursprung = catfactory2D1.CreatePoint(x0, y0);
Point2D point_KopfkreisLinks = catfactory2D1.CreatePoint(xKopfkreis, yKopfkreis);
Point2D point_FußkreisLinks = catfactory2D1.CreatePoint(xFußkreis, yFußkreis);
Point2D point_KopfkreisRechts = catfactory2D1.CreatePoint(-xKopfkreis, yKopfkreis);
Point2D point_FußkreisRechts = catfactory2D1.CreatePoint(-xFußkreis, yFußkreis);
Point2D point_AnfangspunktLinks = catfactory2D1.CreatePoint(-x_AnfangspunktFußkreis, y_AnfangspunktFußkreis);
//Linien
Line2D line_FußkreisKopfkreis = catfactory2D1.CreateLine(xFußkreis, yFußkreis, xKopfkreis, yKopfkreis);
line_FußkreisKopfkreis.StartPoint = point_FußkreisLinks;
line_FußkreisKopfkreis.EndPoint = point_KopfkreisLinks;
Line2D line_KopfkreisFußkreis = catfactory2D1.CreateLine(-xKopfkreis, yKopfkreis, -xFußkreis, yFußkreis);
line_KopfkreisFußkreis.StartPoint = point_KopfkreisRechts;
line_KopfkreisFußkreis.EndPoint = point_FußkreisRechts;
//Kreise
Circle2D circle_KopfkreisLinksRechts = catfactory2D1.CreateCircle(x0, y0, Kopfkreisradius, 0, Math.PI * 2);
circle_KopfkreisLinksRechts.CenterPoint = point_Ursprung;
circle_KopfkreisLinksRechts.EndPoint = point_KopfkreisLinks;
circle_KopfkreisLinksRechts.StartPoint = point_KopfkreisRechts;
Circle2D circle_AnfangFußkreis = catfactory2D1.CreateCircle(x0, x0, Fußkreisradius, 0, Math.PI * 2);
circle_AnfangFußkreis.CenterPoint = point_Ursprung;
circle_AnfangFußkreis.EndPoint = point_AnfangspunktLinks;
circle_AnfangFußkreis.StartPoint = point_FußkreisLinks;
hsp_catiaProfil.CloseEdition();
hsp_catiaPart.Part.Update();
//Profilerstellen Ende
//Kreismuster
ShapeFactory SF = (ShapeFactory)hsp_catiaPart.Part.ShapeFactory;
HybridShapeFactory HSF = (HybridShapeFactory)hsp_catiaPart.Part.HybridShapeFactory;
Part myPart = hsp_catiaPart.Part;
Factory2D Factory2D2 = hsp_catiaProfil.Factory2D;
HybridShapePointCoord Ursprung = HSF.AddNewPointCoord(0, 0, 0);
Reference RefUrsprung = myPart.CreateReferenceFromObject(Ursprung);
HybridShapeDirection XDir = HSF.AddNewDirectionByCoord(1, 0, 0);
Reference RefXDir = myPart.CreateReferenceFromObject(XDir);
CircPattern Kreismuster = SF.AddNewSurfacicCircPattern(Factory2D2, 1, 2, 0, 0, 1, 1, RefUrsprung, RefXDir, false, 0, true, false);
Kreismuster.CircularPatternParameters = CatCircularPatternParameters.catInstancesandAngularSpacing;
AngularRepartition angularRepartition1 = Kreismuster.AngularRepartition;
Angle angle1 = angularRepartition1.AngularSpacing;
angle1.Value = Convert.ToDouble(360 / Convert.ToDouble(av.z));
AngularRepartition angularRepartition2 = Kreismuster.AngularRepartition;
IntParam intParam1 = angularRepartition2.InstancesCount;
intParam1.Value = Convert.ToInt32(av.z) + 1;
Reference Ref_Kreismuster = myPart.CreateReferenceFromObject(Kreismuster);
HybridShapeAssemble Verbindung = HSF.AddNewJoin(Ref_Kreismuster, Ref_Kreismuster);
Reference Ref_Verbindung = myPart.CreateReferenceFromObject(Verbindung);
HSF.GSMVisibility(Ref_Verbindung, 0);
myPart.Update();
Bodies bodies = myPart.Bodies;
Body myBody = bodies.Add();
myBody.set_Name("Zahnrad");
myBody.InsertHybridShape(Verbindung);
myPart.Update();
myPart.InWorkObject = myBody;
Pad myPad = SF.AddNewPadFromRef(Ref_Verbindung, av.t);
myPart.Update();
//Bohrung
Reference RefBohrung1 = hsp_catiaPart.Part.CreateReferenceFromBRepName("FSur:(Face:(Brp:(Pad.1;2);None:();Cf11:());WithTemporaryBody;WithoutBuildError;WithInitialFeatureSupport;MonoFond;MFBRepVersion_CXR15)", myPad);
Hole catBohrung1 = SF.AddNewHoleFromPoint(0, 0, 0, RefBohrung1, 0);
Length catLengthBohrung1 = catBohrung1.Diameter;
catLengthBohrung1.Value = Convert.ToDouble(av.d / 2);
hsp_catiaPart.Part.Update();
}
public void ErzeugeKreismusterMitBohrung(Data dat)
{
//Erzeuge Kreismuster
ShapeFactory SF = (ShapeFactory)hsp_catiaPart.Part.ShapeFactory;
HybridShapeFactory HSF = (HybridShapeFactory)hsp_catiaPart.Part.HybridShapeFactory;
//Skizze und Referenzen
Factory2D Factory2D1 = hsp_catiaProfil.Factory2D;
HybridShapePointCoord Ursprung = HSF.AddNewPointCoord(0, 0, 0);
Reference RefUrsprung = hsp_catiaPart.Part.CreateReferenceFromObject(Ursprung);
HybridShapeDirection XDir = HSF.AddNewDirectionByCoord(1, 0, 0);
Reference RefXDir = hsp_catiaPart.Part.CreateReferenceFromObject(XDir);
//Kreismuster mit Daten füllen
CircPattern Kreismuster = SF.AddNewSurfacicCircPattern(Factory2D1, 1, 2, 0, 0, 1, 1, RefUrsprung, RefXDir, false, 0, true, false);
Kreismuster.CircularPatternParameters = CatCircularPatternParameters.catInstancesandAngularSpacing;
AngularRepartition angularRepartition1 = Kreismuster.AngularRepartition;
Angle angle1 = angularRepartition1.AngularSpacing;
angle1.Value = Convert.ToDouble(360 / dat.getZaehnezahlZahnrad1());
AngularRepartition angularRepartition2 = Kreismuster.AngularRepartition;
IntParam intParam1 = angularRepartition2.InstancesCount;
intParam1.Value = Convert.ToInt32(dat.getZaehnezahlZahnrad1()) + 1;
//geschlossene Kontur
Reference Ref_Kreismuster = hsp_catiaPart.Part.CreateReferenceFromObject(Kreismuster);
HybridShapeAssemble Verbindung = HSF.AddNewJoin(Ref_Kreismuster, Ref_Kreismuster);
Reference Ref_Verbindung = hsp_catiaPart.Part.CreateReferenceFromObject(Verbindung);
HSF.GSMVisibility(Ref_Verbindung, 0);
hsp_catiaPart.Part.Update();
Bodies bodies = hsp_catiaPart.Part.Bodies;
Body myBody = bodies.Add();
myBody.set_Name("Zahnrad");
myBody.InsertHybridShape(Verbindung);
hsp_catiaPart.Part.Update();
//Erzeuge Block aus Skizze
hsp_catiaPart.Part.InWorkObject = myBody;
Pad myPad = SF.AddNewPadFromRef(Ref_Verbindung, dat.getBreiteZahnrad1());
hsp_catiaPart.Part.Update();
//Erzeuge Skizze für Bohrung
Reference RefBohrung1 = hsp_catiaPart.Part.CreateReferenceFromBRepName("FSur:(Face:(Brp:(Pad.1;2);None:();Cf11:());WithTemporaryBody;WithoutBuildError;WithInitialFeatureSupport;MonoFond;MFBRepVersion_CXR15)", myPad);
Hole catBohrung1 = SF.AddNewHoleFromPoint(0, 0, 0, RefBohrung1, dat.getBreiteZahnrad1());
Length catLengthBohrung1 = catBohrung1.Diameter;
catLengthBohrung1.Value = Convert.ToDouble(dat.getTeilkreisdurchmesserZahnrad1() / 2);
hsp_catiaPart.Part.Update();
}
