public SettingsRowChangeEvent(SettingsRow row, global::System.Data.DataRowAction action) {
this.eventRow = row;
this.eventAction = action;
}
public void AddSettingsRow(SettingsRow row) {
this.Rows.Add(row);
}
public void RemoveSettingsRow(SettingsRow row) {
this.Rows.Remove(row);
}
private static GuiWidget CreateSettingInfoUIControls(SliceSettingData settingData, List<PrinterSettingsLayer> layerCascade, PrinterSettingsLayer persistenceLayer,
NamedSettingsLayers viewFilter,
int extruderIndex, out bool addControl, ref int tabIndexForItem)
{
addControl = true;
GuiWidget container = new GuiWidget();
string sliceSettingValue = GetActiveValue(settingData.SlicerConfigName, layerCascade);
GuiWidget nameArea = new GuiWidget(HAnchor.ParentLeftRight, VAnchor.FitToChildren | VAnchor.ParentCenter);
var dataArea = new FlowLayoutWidget();
GuiWidget unitsArea = new GuiWidget(HAnchor.AbsolutePosition, VAnchor.FitToChildren | VAnchor.ParentCenter)
{
Width = settingData.ShowAsOverride ? 50 * GuiWidget.DeviceScale : 5,
};
GuiWidget restoreArea = new GuiWidget(HAnchor.AbsolutePosition, VAnchor.FitToChildren | VAnchor.ParentCenter)
{
Width = settingData.ShowAsOverride ? 30 * GuiWidget.DeviceScale : 0,
};
var settingsRow = new SettingsRow(layerCascade)
{
SettingsKey = settingData.SlicerConfigName,
SettingsValue = sliceSettingValue,
};
settingsRow.AddChild(nameArea);
settingsRow.AddChild(dataArea);
settingsRow.AddChild(unitsArea);
settingsRow.AddChild(restoreArea);
settingsRow.Name = settingData.SlicerConfigName + " Edit Field";
if (!PrinterSettings.KnownSettings.Contains(settingData.SlicerConfigName))
{
// the setting we think we are adding is not in the known settings it may have been deprecated
TextWidget settingName = new TextWidget(String.Format("Setting '{0}' not found in known settings", settingData.SlicerConfigName));
settingName.TextColor = ActiveTheme.Instance.PrimaryTextColor;
//settingName.MinimumSize = new Vector2(minSettingNameWidth, settingName.MinimumSize.y);
nameArea.AddChild(settingName);
nameArea.BackgroundColor = RGBA_Bytes.Red;
}
else
{
int intEditWidth = (int)(60 * GuiWidget.DeviceScale + .5);
int doubleEditWidth = (int)(60 * GuiWidget.DeviceScale + .5);
int vectorXYEditWidth = (int)(60 * GuiWidget.DeviceScale + .5);
int multiLineEditHeight = (int)(120 * GuiWidget.DeviceScale + .5);
if (settingData.DataEditType != SliceSettingData.DataEditTypes.MULTI_LINE_TEXT)
{
var nameHolder = new GuiWidget(HAnchor.ParentLeftRight, VAnchor.FitToChildren | VAnchor.ParentCenter)
{
Padding = new BorderDouble(0, 0, 5, 0),
HAnchor = HAnchor.ParentLeftRight,
};
nameHolder.AddChild(new WrappedTextWidget(settingData.PresentationName.Localize(), pointSize: 10, textColor: ActiveTheme.Instance.PrimaryTextColor));
nameArea.AddChild(nameHolder);
}
switch (settingData.DataEditType)
{
case SliceSettingData.DataEditTypes.INT:
{
FlowLayoutWidget content = new FlowLayoutWidget();
int currentValue;
int.TryParse(sliceSettingValue, out currentValue);
var intEditWidget = new MHNumberEdit(currentValue, pixelWidth: intEditWidth, tabIndex: tabIndexForItem++)
{
ToolTipText = settingData.HelpText,
SelectAllOnFocus = true,
Name = settingData.PresentationName + " Edit",
};
intEditWidget.ActuallNumberEdit.EditComplete += (sender, e) =>
{
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, ((NumberEdit)sender).Value.ToString(), persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
content.AddChild(intEditWidget);
unitsArea.AddChild(GetExtraSettingsWidget(settingData));
if (settingData.QuickMenuSettings.Count > 0)
{
dataArea.AddChild(CreateQuickMenu(settingData, persistenceLayer, content, intEditWidget.ActuallNumberEdit.InternalTextEditWidget, layerCascade));
}
else
{
dataArea.AddChild(content);
}
settingsRow.ValueChanged = (text) =>
{
intEditWidget.Text = text;
};
}
break;
case SliceSettingData.DataEditTypes.DOUBLE:
{
double currentValue;
double.TryParse(sliceSettingValue, out currentValue);
var doubleEditWidget = new MHNumberEdit(currentValue, allowNegatives: true, allowDecimals: true, pixelWidth: doubleEditWidth, tabIndex: tabIndexForItem++)
{
ToolTipText = settingData.HelpText,
SelectAllOnFocus = true
};
doubleEditWidget.ActuallNumberEdit.EditComplete += (sender, e) =>
{
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, ((NumberEdit)sender).Value.ToString(), persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
dataArea.AddChild(doubleEditWidget);
unitsArea.AddChild(GetExtraSettingsWidget(settingData));
settingsRow.ValueChanged = (text) =>
{
double currentValue2 = 0;
double.TryParse(text, out currentValue2);
doubleEditWidget.ActuallNumberEdit.Value = currentValue2;
};
}
break;
case SliceSettingData.DataEditTypes.POSITIVE_DOUBLE:
{
const string multiValuesAreDiffernt = "-";
FlowLayoutWidget content = new FlowLayoutWidget();
var doubleEditWidget = new MHNumberEdit(0, allowDecimals: true, pixelWidth: doubleEditWidth, tabIndex: tabIndexForItem++)
{
ToolTipText = settingData.HelpText,
Name = settingData.PresentationName + " Textbox",
SelectAllOnFocus = true
};
double currentValue;
bool ChangesMultipleOtherSettings = settingData.SetSettingsOnChange.Count > 0;
if (ChangesMultipleOtherSettings)
{
bool allTheSame = true;
string setting = GetActiveValue(settingData.SetSettingsOnChange[0], layerCascade);
for (int i = 1; i < settingData.SetSettingsOnChange.Count; i++)
{
string nextSetting = GetActiveValue(settingData.SetSettingsOnChange[i], layerCascade);
if (setting != nextSetting)
{
allTheSame = false;
break;
}
}
if (allTheSame && setting.EndsWith("mm"))
{
double.TryParse(setting.Substring(0, setting.Length - 2), out currentValue);
doubleEditWidget.ActuallNumberEdit.Value = currentValue;
}
else
{
doubleEditWidget.ActuallNumberEdit.InternalNumberEdit.Text = multiValuesAreDiffernt;
}
}
else // just set the setting normally
{
double.TryParse(sliceSettingValue, out currentValue);
doubleEditWidget.ActuallNumberEdit.Value = currentValue;
}
doubleEditWidget.ActuallNumberEdit.InternalTextEditWidget.MarkAsStartingState();
doubleEditWidget.ActuallNumberEdit.EditComplete += (sender, e) =>
{
NumberEdit numberEdit = (NumberEdit)sender;
// If this setting sets other settings, then do that.
if (ChangesMultipleOtherSettings
&& numberEdit.Text != multiValuesAreDiffernt)
{
foreach (string setting in settingData.SetSettingsOnChange)
{
ActiveSliceSettings.Instance.SetValue(setting, numberEdit.Value.ToString() + "mm", persistenceLayer);
}
}
// also always save to the local setting
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, numberEdit.Value.ToString(), persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
content.AddChild(doubleEditWidget);
unitsArea.AddChild(GetExtraSettingsWidget(settingData));
if (settingData.QuickMenuSettings.Count > 0)
{
dataArea.AddChild(CreateQuickMenu(settingData, persistenceLayer, content, doubleEditWidget.ActuallNumberEdit.InternalTextEditWidget, layerCascade));
}
else
{
dataArea.AddChild(content);
}
settingsRow.ValueChanged = (text) =>
{
double currentValue2 = 0;
double.TryParse(text, out currentValue2);
doubleEditWidget.ActuallNumberEdit.Value = currentValue2;
};
}
break;
case SliceSettingData.DataEditTypes.OFFSET:
{
double currentValue;
double.TryParse(sliceSettingValue, out currentValue);
var doubleEditWidget = new MHNumberEdit(currentValue, allowDecimals: true, allowNegatives: true, pixelWidth: doubleEditWidth, tabIndex: tabIndexForItem++)
{
ToolTipText = settingData.HelpText,
SelectAllOnFocus = true
};
doubleEditWidget.ActuallNumberEdit.EditComplete += (sender, e) =>
{
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, ((NumberEdit)sender).Value.ToString(), persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
dataArea.AddChild(doubleEditWidget);
unitsArea.AddChild(GetExtraSettingsWidget(settingData));
settingsRow.ValueChanged = (text) =>
{
double currentValue2;
double.TryParse(text, out currentValue2);
doubleEditWidget.ActuallNumberEdit.Value = currentValue2;
};
}
break;
case SliceSettingData.DataEditTypes.DOUBLE_OR_PERCENT:
{
FlowLayoutWidget content = new FlowLayoutWidget();
var stringEdit = new MHTextEditWidget(sliceSettingValue, pixelWidth: doubleEditWidth - 2, tabIndex: tabIndexForItem++)
{
ToolTipText = settingData.HelpText,
SelectAllOnFocus = true
};
stringEdit.ActualTextEditWidget.EditComplete += (sender, e) =>
{
var textEditWidget = (TextEditWidget)sender;
string text = textEditWidget.Text.Trim();
bool isPercent = text.Contains("%");
if (isPercent)
{
text = text.Substring(0, text.IndexOf("%"));
}
double result;
double.TryParse(text, out result);
text = result.ToString();
if (isPercent)
{
text += "%";
}
textEditWidget.Text = text;
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, textEditWidget.Text, persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
stringEdit.ActualTextEditWidget.InternalTextEditWidget.AllSelected += (sender, e) =>
{
// select everything up to the % (if present)
InternalTextEditWidget textEditWidget = (InternalTextEditWidget)sender;
int percentIndex = textEditWidget.Text.IndexOf("%");
if (percentIndex != -1)
{
textEditWidget.SetSelection(0, percentIndex - 1);
}
};
content.AddChild(stringEdit);
unitsArea.AddChild(GetExtraSettingsWidget(settingData));
if (settingData.QuickMenuSettings.Count > 0)
{
dataArea.AddChild(CreateQuickMenu(settingData, persistenceLayer, content, stringEdit.ActualTextEditWidget.InternalTextEditWidget, layerCascade));
}
else
{
dataArea.AddChild(content);
}
settingsRow.ValueChanged = (text) =>
{
stringEdit.Text = text;
};
}
break;
case SliceSettingData.DataEditTypes.INT_OR_MM:
{
FlowLayoutWidget content = new FlowLayoutWidget();
var stringEdit = new MHTextEditWidget(sliceSettingValue, pixelWidth: doubleEditWidth - 2, tabIndex: tabIndexForItem++)
{
ToolTipText = settingData.HelpText,
SelectAllOnFocus = true
};
string startingText = stringEdit.Text;
stringEdit.ActualTextEditWidget.EditComplete += (sender, e) =>
{
TextEditWidget textEditWidget = (TextEditWidget)sender;
// only validate when we lose focus
if (!textEditWidget.ContainsFocus)
{
string text = textEditWidget.Text;
text = text.Trim();
bool isMm = text.Contains("mm");
if (isMm)
{
text = text.Substring(0, text.IndexOf("mm"));
}
double result;
double.TryParse(text, out result);
text = result.ToString();
if (isMm)
{
text += "mm";
}
else
{
result = (int)result;
text = result.ToString();
}
textEditWidget.Text = text;
startingText = stringEdit.Text;
}
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, textEditWidget.Text, persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
// make sure we are still looking for the final validation before saving.
if (textEditWidget.ContainsFocus)
{
UiThread.RunOnIdle(() =>
{
string currentText = textEditWidget.Text;
int cursorIndex = textEditWidget.InternalTextEditWidget.CharIndexToInsertBefore;
textEditWidget.Text = startingText;
textEditWidget.InternalTextEditWidget.MarkAsStartingState();
textEditWidget.Text = currentText;
textEditWidget.InternalTextEditWidget.CharIndexToInsertBefore = cursorIndex;
});
}
};
stringEdit.ActualTextEditWidget.InternalTextEditWidget.AllSelected += (sender, e) =>
{
// select everything up to the mm (if present)
InternalTextEditWidget textEditWidget = (InternalTextEditWidget)sender;
int mMIndex = textEditWidget.Text.IndexOf("mm");
if (mMIndex != -1)
{
textEditWidget.SetSelection(0, mMIndex - 1);
}
};
content.AddChild(stringEdit);
unitsArea.AddChild(GetExtraSettingsWidget(settingData));
if (settingData.QuickMenuSettings.Count > 0)
{
dataArea.AddChild(CreateQuickMenu(settingData, persistenceLayer, content, stringEdit.ActualTextEditWidget.InternalTextEditWidget, layerCascade));
}
else
{
dataArea.AddChild(content);
}
settingsRow.ValueChanged = (text) =>
{
stringEdit.Text = text;
};
}
break;
case SliceSettingData.DataEditTypes.CHECK_BOX:
{
var checkBoxWidget = new CheckBox("")
{
Name = settingData.PresentationName + " Checkbox",
ToolTipText = settingData.HelpText,
VAnchor = Agg.UI.VAnchor.ParentBottom,
TextColor = ActiveTheme.Instance.PrimaryTextColor,
Checked = sliceSettingValue == "1"
};
checkBoxWidget.Click += (sender, e) =>
{
bool isChecked = ((CheckBox)sender).Checked;
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, isChecked ? "1" : "0", persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
dataArea.AddChild(checkBoxWidget);
settingsRow.ValueChanged = (text) =>
{
checkBoxWidget.Checked = text == "1";
};
}
break;
case SliceSettingData.DataEditTypes.STRING:
{
var stringEdit = new MHTextEditWidget(sliceSettingValue, pixelWidth: settingData.ShowAsOverride ? 120 : 200, tabIndex: tabIndexForItem++)
{
Name = settingData.PresentationName + " Edit",
};
stringEdit.ToolTipText = settingData.HelpText;
stringEdit.ActualTextEditWidget.EditComplete += (sender, e) =>
{
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, ((TextEditWidget)sender).Text, persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
dataArea.AddChild(stringEdit);
settingsRow.ValueChanged = (text) =>
{
stringEdit.Text = text;
};
}
break;
case SliceSettingData.DataEditTypes.MULTI_LINE_TEXT:
{
string convertedNewLines = sliceSettingValue.Replace("\\n", "\n");
var stringEdit = new MHTextEditWidget(convertedNewLines, pixelWidth: 320, pixelHeight: multiLineEditHeight, multiLine: true, tabIndex: tabIndexForItem++, typeFace: ApplicationController.MonoSpacedTypeFace)
{
HAnchor = HAnchor.ParentLeftRight,
};
stringEdit.ActualTextEditWidget.EditComplete += (sender, e) =>
{
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, ((TextEditWidget)sender).Text.Replace("\n", "\\n"), persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
nameArea.HAnchor = HAnchor.AbsolutePosition;
nameArea.Width = 0;
dataArea.AddChild(stringEdit);
dataArea.HAnchor = HAnchor.ParentLeftRight;
settingsRow.ValueChanged = (text) =>
{
stringEdit.Text = text.Replace("\\n", "\n");
};
}
break;
case SliceSettingData.DataEditTypes.COM_PORT:
{
#if __ANDROID__
addControl = false;
#endif
// The COM_PORT control is unique in its approach to the SlicerConfigName. It uses "com_port" settings name to
// bind to a context that will place it in the SliceSetting view but it binds its values to a machine
// specific dictionary key that is not exposed in the UI. At runtime we lookup and store to '<machinename>_com_port'
// ensuring that a single printer can be shared across different devices and we'll select the correct com port in each case
var selectableOptions = new DropDownList("None", maxHeight: 200)
{
ToolTipText = settingData.HelpText,
Margin = new BorderDouble(),
Name = "Com Port Dropdown"
};
selectableOptions.Click += (s, e) =>
{
AddComMenuItems(settingData, persistenceLayer, settingsRow, selectableOptions);
};
AddComMenuItems(settingData, persistenceLayer, settingsRow, selectableOptions);
dataArea.AddChild(selectableOptions);
settingsRow.ValueChanged = (text) =>
{
// Lookup the machine specific comport value rather than the passed in text value
selectableOptions.SelectedLabel = ActiveSliceSettings.Instance.Helpers.ComPort();
};
}
break;
case SliceSettingData.DataEditTypes.LIST:
{
var selectableOptions = new DropDownList("None", maxHeight: 200)
{
ToolTipText = settingData.HelpText,
Margin = new BorderDouble()
};
foreach (string listItem in settingData.ExtraSettings.Split(','))
{
MenuItem newItem = selectableOptions.AddItem(listItem);
if (newItem.Text == sliceSettingValue)
{
selectableOptions.SelectedLabel = sliceSettingValue;
}
newItem.Selected += (sender, e) =>
{
MenuItem menuItem = ((MenuItem)sender);
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, menuItem.Text, persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
}
dataArea.AddChild(selectableOptions);
settingsRow.ValueChanged = (text) =>
{
selectableOptions.SelectedLabel = text;
};
}
break;
case SliceSettingData.DataEditTypes.HARDWARE_PRESENT:
{
var checkBoxWidget = new CheckBox("")
{
Name = settingData.PresentationName + " Checkbox",
ToolTipText = settingData.HelpText,
VAnchor = Agg.UI.VAnchor.ParentBottom,
TextColor = ActiveTheme.Instance.PrimaryTextColor,
Checked = sliceSettingValue == "1"
};
checkBoxWidget.Click += (sender, e) =>
{
bool isChecked = ((CheckBox)sender).Checked;
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, isChecked ? "1" : "0", persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
dataArea.AddChild(checkBoxWidget);
settingsRow.ValueChanged = (text) =>
{
checkBoxWidget.Checked = text == "1";
};
}
break;
case SliceSettingData.DataEditTypes.VECTOR2:
{
string[] xyValueStrings = sliceSettingValue.Split(',');
if (xyValueStrings.Length != 2)
{
xyValueStrings = new string[] { "0", "0" };
}
double currentXValue;
double.TryParse(xyValueStrings[0], out currentXValue);
var xEditWidget = new MHNumberEdit(currentXValue, allowDecimals: true, pixelWidth: vectorXYEditWidth, tabIndex: tabIndexForItem++)
{
ToolTipText = settingData.HelpText,
SelectAllOnFocus = true
};
double currentYValue;
double.TryParse(xyValueStrings[1], out currentYValue);
var yEditWidget = new MHNumberEdit(currentYValue, allowDecimals: true, pixelWidth: vectorXYEditWidth, tabIndex: tabIndexForItem++)
{
ToolTipText = settingData.HelpText,
SelectAllOnFocus = true,
Margin = new BorderDouble(20, 0, 0, 0),
};
xEditWidget.ActuallNumberEdit.EditComplete += (sender, e) =>
{
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, xEditWidget.ActuallNumberEdit.Value.ToString() + "," + yEditWidget.ActuallNumberEdit.Value.ToString(), persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
dataArea.AddChild(xEditWidget);
dataArea.AddChild(new TextWidget("X", pointSize: 10, textColor: ActiveTheme.Instance.PrimaryTextColor)
{
VAnchor = VAnchor.ParentCenter,
Margin = new BorderDouble(5, 0),
});
yEditWidget.ActuallNumberEdit.EditComplete += (sender, e) =>
{
ActiveSliceSettings.Instance.SetValue(settingData.SlicerConfigName, xEditWidget.ActuallNumberEdit.Value.ToString() + "," + yEditWidget.ActuallNumberEdit.Value.ToString(), persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
dataArea.AddChild(yEditWidget);
var yLabel = new GuiWidget(HAnchor.ParentLeftRight, VAnchor.FitToChildren | VAnchor.ParentCenter)
{
Padding = new BorderDouble(5, 0),
HAnchor = HAnchor.ParentLeftRight,
};
yLabel.AddChild(new WrappedTextWidget("Y", pointSize: 9, textColor: ActiveTheme.Instance.PrimaryTextColor));
unitsArea.AddChild(yLabel);
settingsRow.ValueChanged = (text) =>
{
double currentValue2;
string[] xyValueStrings2 = text.Split(',');
if (xyValueStrings2.Length != 2)
{
xyValueStrings2 = new string[] { "0", "0" };
}
double.TryParse(xyValueStrings2[0], out currentValue2);
xEditWidget.ActuallNumberEdit.Value = currentValue2;
double.TryParse(xyValueStrings2[1], out currentValue2);
yEditWidget.ActuallNumberEdit.Value = currentValue2;
};
}
break;
case SliceSettingData.DataEditTypes.OFFSET2:
{
Vector2 offset = ActiveSliceSettings.Instance.Helpers.ExtruderOffset(extruderIndex);
var xEditWidget = new MHNumberEdit(offset.x, allowDecimals: true, allowNegatives: true, pixelWidth: vectorXYEditWidth, tabIndex: tabIndexForItem++)
{
ToolTipText = settingData.HelpText,
SelectAllOnFocus = true,
};
var yEditWidget = new MHNumberEdit(offset.y, allowDecimals: true, allowNegatives: true, pixelWidth: vectorXYEditWidth, tabIndex: tabIndexForItem++)
{
ToolTipText = settingData.HelpText,
SelectAllOnFocus = true,
Margin = new BorderDouble(20, 0, 0, 0),
};
xEditWidget.ActuallNumberEdit.EditComplete += (sender, e) =>
{
int extruderIndexLocal = extruderIndex;
SaveCommaSeparatedIndexSetting(extruderIndexLocal, layerCascade, settingData.SlicerConfigName, xEditWidget.ActuallNumberEdit.Value.ToString() + "x" + yEditWidget.ActuallNumberEdit.Value.ToString(), persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
dataArea.AddChild(xEditWidget);
dataArea.AddChild(new TextWidget("X", pointSize: 10, textColor: ActiveTheme.Instance.PrimaryTextColor)
{
VAnchor = VAnchor.ParentCenter,
Margin = new BorderDouble(5, 0),
});
yEditWidget.ActuallNumberEdit.EditComplete += (sender, e) =>
{
int extruderIndexLocal = extruderIndex;
SaveCommaSeparatedIndexSetting(extruderIndexLocal, layerCascade, settingData.SlicerConfigName, xEditWidget.ActuallNumberEdit.Value.ToString() + "x" + yEditWidget.ActuallNumberEdit.Value.ToString(), persistenceLayer);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
dataArea.AddChild(yEditWidget);
var yLabel = new GuiWidget(HAnchor.ParentLeftRight, VAnchor.FitToChildren | VAnchor.ParentCenter)
{
Padding = new BorderDouble(5, 0),
HAnchor = HAnchor.ParentLeftRight,
};
yLabel.AddChild(new WrappedTextWidget("Y", pointSize: 9, textColor: ActiveTheme.Instance.PrimaryTextColor));
unitsArea.AddChild(yLabel);
settingsRow.ValueChanged = (text) =>
{
Vector2 offset2 = ActiveSliceSettings.Instance.Helpers.ExtruderOffset(extruderIndex);
xEditWidget.ActuallNumberEdit.Value = offset2.x;
yEditWidget.ActuallNumberEdit.Value = offset2.y;
};
}
break;
default:
var missingSetting = new TextWidget(String.Format("Missing the setting for '{0}'.", settingData.DataEditType.ToString()))
{
TextColor = ActiveTheme.Instance.PrimaryTextColor,
BackgroundColor = RGBA_Bytes.Red
};
dataArea.AddChild(missingSetting);
break;
}
}
container.HAnchor = HAnchor.ParentLeftRight;
container.VAnchor = VAnchor.FitToChildren;
Button restoreButton = null;
if (settingData.ShowAsOverride)
{
restoreButton = new Button(new ButtonViewStates(new ImageWidget(restoreNormal), new ImageWidget(restoreHover), new ImageWidget(restorePressed), new ImageWidget(restoreNormal)))
{
Name = "Restore " + settingData.SlicerConfigName,
VAnchor = VAnchor.ParentCenter,
Margin = new BorderDouble(0, 0, 5, 0),
ToolTipText = "Restore Default".Localize()
};
restoreButton.Click += (sender, e) =>
{
// Revert the user override
if (persistenceLayer == null)
{
ActiveSliceSettings.Instance.ClearValue(settingData.SlicerConfigName);
}
else
{
ActiveSliceSettings.Instance.ClearValue(settingData.SlicerConfigName, persistenceLayer);
}
settingsRow.RefreshValue(layerCascade);
OnSettingsChanged(settingData);
};
restoreArea.AddChild(restoreButton);
}
container.AddChild(settingsRow);
// Define the UpdateStyle implementation
settingsRow.UpdateStyle = () =>
{
if (persistenceLayer.ContainsKey(settingData.SlicerConfigName))
{
switch (viewFilter)
{
case NamedSettingsLayers.All:
if (settingData.ShowAsOverride)
{
settingsRow.BackgroundColor = userSettingBackgroundColor;
}
break;
case NamedSettingsLayers.Material:
settingsRow.BackgroundColor = materialSettingBackgroundColor;
break;
case NamedSettingsLayers.Quality:
settingsRow.BackgroundColor = qualitySettingBackgroundColor;
break;
}
if(restoreButton != null) restoreButton.Visible = true;
}
else if (layerCascade == null)
{
if (ActiveSliceSettings.Instance.SettingExistsInLayer(settingData.SlicerConfigName, NamedSettingsLayers.Material))
{
settingsRow.BackgroundColor = materialSettingBackgroundColor;
}
else if (ActiveSliceSettings.Instance.SettingExistsInLayer(settingData.SlicerConfigName, NamedSettingsLayers.Quality))
{
settingsRow.BackgroundColor = qualitySettingBackgroundColor;
}
else
{
settingsRow.BackgroundColor = RGBA_Bytes.Transparent;
}
if (restoreButton != null) restoreButton.Visible = false;
}
else
{
if (restoreButton != null) restoreButton.Visible = false;
settingsRow.BackgroundColor = RGBA_Bytes.Transparent;
}
};
// Invoke the UpdateStyle implementation
settingsRow.UpdateStyle();
return container;
}
public SettingRow AddSettingRow(string Name, string Setting_Text, SettingsRow parentSettingsRowBySettings_Setting) {
SettingRow rowSettingRow = ((SettingRow)(this.NewRow()));
object[] columnValuesArray = new object[] {
Name,
Setting_Text,
null};
if ((parentSettingsRowBySettings_Setting != null)) {
columnValuesArray[2] = parentSettingsRowBySettings_Setting[0];
}
rowSettingRow.ItemArray = columnValuesArray;
this.Rows.Add(rowSettingRow);
return rowSettingRow;
}
private GuiWidget CreateSettingInfoUIControls(OrganizerSettingsData settingData, double minSettingNameWidth, int extruderIndex)
{
GuiWidget container = new GuiWidget();
this.HAnchor = HAnchor.ParentLeftRight;
string sliceSettingValue = ActiveSliceSettings.Instance.GetActiveValue(settingData.SlicerConfigName);
var settingsRow = new SettingsRow()
{
SettingsKey = settingData.SlicerConfigName,
SettingsValue = sliceSettingValue
};
if (!ActiveSliceSettings.Instance.InBaseConfig(settingData.SlicerConfigName))
{
// the setting we think we are adding is not in the config.ini it may have been deprecated
TextWidget settingName = new TextWidget(String.Format("Setting '{0}' not found in config.ini", settingData.SlicerConfigName));
settingName.TextColor = ActiveTheme.Instance.PrimaryTextColor;
settingName.MinimumSize = new Vector2(minSettingNameWidth, settingName.MinimumSize.y);
settingsRow.AddChild(settingName);
settingsRow.BackgroundColor = RGBA_Bytes.Red;
}
else
{
int intEditWidth = (int)(60 * TextWidget.GlobalPointSizeScaleRatio + .5);
int doubleEditWidth = (int)(60 * TextWidget.GlobalPointSizeScaleRatio + .5);
if (settingData.QuickMenuSettings.Count > 0)
{
doubleEditWidth = (int)(35 * TextWidget.GlobalPointSizeScaleRatio + .5);
}
int vectorXYEditWidth = (int)(60 * TextWidget.GlobalPointSizeScaleRatio + .5);
int multiLineEditHeight = (int)(60 * TextWidget.GlobalPointSizeScaleRatio + .5);
if (settingData.DataEditType != OrganizerSettingsData.DataEditTypes.MULTI_LINE_TEXT)
{
var nameHolder = new GuiWidget(HAnchor.AbsolutePosition, VAnchor.FitToChildren | VAnchor.ParentCenter)
{
Width = minSettingNameWidth,
Padding = new BorderDouble(0, 0, 5, 0),
};
nameHolder.AddChild(new WrappedTextWidget(
settingData.PresentationName.Localize(),
minSettingNameWidth,
pointSize: 10,
textColor: ActiveTheme.Instance.PrimaryTextColor));
settingsRow.AddChild(nameHolder);
}
switch (settingData.DataEditType)
{
case OrganizerSettingsData.DataEditTypes.INT:
{
int currentValue;
int.TryParse(sliceSettingValue, out currentValue);
var intEditWidget = new MHNumberEdit(currentValue, pixelWidth: intEditWidth, tabIndex: tabIndexForItem++)
{
ToolTipText = settingData.HelpText,
SelectAllOnFocus = true
};
intEditWidget.ActuallNumberEdit.EditComplete += (sender, e) =>
{
SaveSetting(settingData.SlicerConfigName, ((NumberEdit)sender).Value.ToString());
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
settingsRow.AddChild(intEditWidget);
settingsRow.AddChild(GetExtraSettingsWidget(settingData));
settingsRow.ValueChanged = (text) => intEditWidget.Text = text;
}
break;
case OrganizerSettingsData.DataEditTypes.DOUBLE:
{
double currentValue;
double.TryParse(sliceSettingValue, out currentValue);
var doubleEditWidget = new MHNumberEdit(currentValue, allowNegatives: true, allowDecimals: true, pixelWidth: doubleEditWidth, tabIndex: tabIndexForItem++)
{
ToolTipText = settingData.HelpText,
SelectAllOnFocus = true
};
doubleEditWidget.ActuallNumberEdit.EditComplete += (sender, e) =>
{
SaveSetting(settingData.SlicerConfigName, ((NumberEdit)sender).Value.ToString());
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
settingsRow.AddChild(doubleEditWidget);
settingsRow.AddChild(GetExtraSettingsWidget(settingData));
settingsRow.ValueChanged = (text) =>
{
double currentValue2 = 0;
double.TryParse(text, out currentValue2);
doubleEditWidget.ActuallNumberEdit.Value = currentValue2;
};
}
break;
case OrganizerSettingsData.DataEditTypes.POSITIVE_DOUBLE:
{
const string multiValuesAreDiffernt = "-";
FlowLayoutWidget content = new FlowLayoutWidget();
var doubleEditWidget = new MHNumberEdit(0, allowDecimals: true, pixelWidth: doubleEditWidth, tabIndex: tabIndexForItem++)
{
ToolTipText = settingData.HelpText,
Name = settingData.PresentationName + " Textbox",
SelectAllOnFocus = true
};
double currentValue;
bool ChangesMultipleOtherSettings = settingData.SetSettingsOnChange.Count > 0;
if (ChangesMultipleOtherSettings)
{
bool allTheSame = true;
string setting = ActiveSliceSettings.Instance.GetActiveValue(settingData.SetSettingsOnChange[0]);
for (int i = 1; i < settingData.SetSettingsOnChange.Count; i++)
{
string nextSetting = ActiveSliceSettings.Instance.GetActiveValue(settingData.SetSettingsOnChange[i]);
if (setting != nextSetting)
{
allTheSame = false;
break;
}
}
if (allTheSame && setting.EndsWith("mm"))
{
double.TryParse(setting.Substring(0, setting.Length - 2), out currentValue);
doubleEditWidget.ActuallNumberEdit.Value = currentValue;
}
else
{
doubleEditWidget.ActuallNumberEdit.InternalNumberEdit.Text = multiValuesAreDiffernt;
}
}
else // just set the setting normally
{
double.TryParse(sliceSettingValue, out currentValue);
doubleEditWidget.ActuallNumberEdit.Value = currentValue;
}
doubleEditWidget.ActuallNumberEdit.InternalTextEditWidget.MarkAsStartingState();
doubleEditWidget.ActuallNumberEdit.EditComplete += (sender, e) =>
{
NumberEdit numberEdit = (NumberEdit)sender;
// If this setting sets other settings, then do that.
if (ChangesMultipleOtherSettings
&& numberEdit.Text != multiValuesAreDiffernt)
{
foreach (string setting in settingData.SetSettingsOnChange)
{
SaveSetting(setting, numberEdit.Value.ToString() + "mm");
}
}
// also always save to the local setting
SaveSetting(settingData.SlicerConfigName, numberEdit.Value.ToString());
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
content.AddChild(doubleEditWidget);
content.AddChild(GetExtraSettingsWidget(settingData));
if (settingData.QuickMenuSettings.Count > 0)
{
settingsRow.AddChild(CreateQuickMenu(settingData, content, doubleEditWidget.ActuallNumberEdit.InternalTextEditWidget));
}
else
{
settingsRow.AddChild(content);
}
settingsRow.ValueChanged = (text) =>
{
double currentValue2 = 0;
double.TryParse(text, out currentValue2);
doubleEditWidget.ActuallNumberEdit.Value = currentValue2;
};
}
break;
case OrganizerSettingsData.DataEditTypes.OFFSET:
{
double currentValue;
double.TryParse(sliceSettingValue, out currentValue);
var doubleEditWidget = new MHNumberEdit(currentValue, allowDecimals: true, allowNegatives: true, pixelWidth: doubleEditWidth, tabIndex: tabIndexForItem++)
{
ToolTipText = settingData.HelpText,
SelectAllOnFocus = true
};
doubleEditWidget.ActuallNumberEdit.EditComplete += (sender, e) =>
{
SaveSetting(settingData.SlicerConfigName, ((NumberEdit)sender).Value.ToString());
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
settingsRow.AddChild(doubleEditWidget);
settingsRow.AddChild(GetExtraSettingsWidget(settingData));
settingsRow.ValueChanged = (text) =>
{
double currentValue2;
double.TryParse(text, out currentValue2);
doubleEditWidget.ActuallNumberEdit.Value = currentValue2;
};
}
break;
case OrganizerSettingsData.DataEditTypes.DOUBLE_OR_PERCENT:
{
FlowLayoutWidget content = new FlowLayoutWidget();
var stringEdit = new MHTextEditWidget(sliceSettingValue, pixelWidth: doubleEditWidth - 2, tabIndex: tabIndexForItem++)
{
ToolTipText = settingData.HelpText,
SelectAllOnFocus = true
};
stringEdit.ActualTextEditWidget.EditComplete += (sender, e) =>
{
var textEditWidget = (TextEditWidget)sender;
string text = textEditWidget.Text.Trim();
bool isPercent = text.Contains("%");
if (isPercent)
{
text = text.Substring(0, text.IndexOf("%"));
}
double result;
double.TryParse(text, out result);
text = result.ToString();
if (isPercent)
{
text += "%";
}
textEditWidget.Text = text;
SaveSetting(settingData.SlicerConfigName, textEditWidget.Text);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
stringEdit.ActualTextEditWidget.InternalTextEditWidget.AllSelected += (sender, e) =>
{
// select everything up to the % (if present)
InternalTextEditWidget textEditWidget = (InternalTextEditWidget)sender;
int percentIndex = textEditWidget.Text.IndexOf("%");
if (percentIndex != -1)
{
textEditWidget.SetSelection(0, percentIndex - 1);
}
};
content.AddChild(stringEdit);
content.AddChild(GetExtraSettingsWidget(settingData));
if (settingData.QuickMenuSettings.Count > 0)
{
settingsRow.AddChild(CreateQuickMenu(settingData, content, stringEdit.ActualTextEditWidget.InternalTextEditWidget));
}
else
{
settingsRow.AddChild(content);
}
settingsRow.ValueChanged = (text) => stringEdit.Text = text;
}
break;
case OrganizerSettingsData.DataEditTypes.INT_OR_MM:
{
FlowLayoutWidget content = new FlowLayoutWidget();
var stringEdit = new MHTextEditWidget(sliceSettingValue, pixelWidth: doubleEditWidth - 2, tabIndex: tabIndexForItem++)
{
ToolTipText = settingData.HelpText,
SelectAllOnFocus = true
};
string startingText = stringEdit.Text;
stringEdit.ActualTextEditWidget.EditComplete += (sender, e) =>
{
TextEditWidget textEditWidget = (TextEditWidget)sender;
// only validate when we lose focus
if (!textEditWidget.ContainsFocus)
{
string text = textEditWidget.Text;
text = text.Trim();
bool isMm = text.Contains("mm");
if (isMm)
{
text = text.Substring(0, text.IndexOf("mm"));
}
double result;
double.TryParse(text, out result);
text = result.ToString();
if (isMm)
{
text += "mm";
}
else
{
result = (int)result;
text = result.ToString();
}
textEditWidget.Text = text;
startingText = stringEdit.Text;
}
SaveSetting(settingData.SlicerConfigName, textEditWidget.Text);
OnSettingsChanged(settingData);
// make sure we are still looking for the final validation before saving.
if (textEditWidget.ContainsFocus)
{
UiThread.RunOnIdle(() =>
{
string currentText = textEditWidget.Text;
int cursorIndex = textEditWidget.InternalTextEditWidget.CharIndexToInsertBefore;
textEditWidget.Text = startingText;
textEditWidget.InternalTextEditWidget.MarkAsStartingState();
textEditWidget.Text = currentText;
textEditWidget.InternalTextEditWidget.CharIndexToInsertBefore = cursorIndex;
});
}
};
stringEdit.ActualTextEditWidget.InternalTextEditWidget.AllSelected += (sender, e) =>
{
// select everything up to the mm (if present)
InternalTextEditWidget textEditWidget = (InternalTextEditWidget)sender;
int mMIndex = textEditWidget.Text.IndexOf("mm");
if (mMIndex != -1)
{
textEditWidget.SetSelection(0, mMIndex - 1);
}
};
content.AddChild(stringEdit);
content.AddChild(GetExtraSettingsWidget(settingData));
if (settingData.QuickMenuSettings.Count > 0)
{
settingsRow.AddChild(CreateQuickMenu(settingData, content, stringEdit.ActualTextEditWidget.InternalTextEditWidget));
}
else
{
settingsRow.AddChild(content);
}
settingsRow.ValueChanged = (text) => stringEdit.Text = text;
}
break;
case OrganizerSettingsData.DataEditTypes.CHECK_BOX:
{
var checkBoxWidget = new CheckBox("")
{
Name = settingData.PresentationName + " Checkbox",
ToolTipText = settingData.HelpText,
VAnchor = Agg.UI.VAnchor.ParentBottom,
TextColor = ActiveTheme.Instance.PrimaryTextColor,
Checked = sliceSettingValue == "1"
};
checkBoxWidget.CheckedStateChanged += (sender, e) =>
{
bool isChecked = ((CheckBox)sender).Checked;
SaveSetting(settingData.SlicerConfigName, isChecked ? "1" : "0");
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
settingsRow.AddChild(checkBoxWidget);
settingsRow.ValueChanged = (text) => checkBoxWidget.Checked = text == "1";
}
break;
case OrganizerSettingsData.DataEditTypes.STRING:
{
var stringEdit = new MHTextEditWidget(sliceSettingValue, pixelWidth: 120, tabIndex: tabIndexForItem++);
stringEdit.ToolTipText = settingData.HelpText;
stringEdit.ActualTextEditWidget.EditComplete += (sender, e) =>
{
SaveSetting(settingData.SlicerConfigName, ((TextEditWidget)sender).Text);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
settingsRow.AddChild(stringEdit);
settingsRow.ValueChanged = (text) => stringEdit.Text = text;
}
break;
case OrganizerSettingsData.DataEditTypes.MULTI_LINE_TEXT:
{
string convertedNewLines = sliceSettingValue.Replace("\\n", "\n");
var stringEdit = new MHTextEditWidget(convertedNewLines, pixelWidth: 320, pixelHeight: multiLineEditHeight, multiLine: true, tabIndex: tabIndexForItem++);
stringEdit.ActualTextEditWidget.EditComplete += (sender, e) =>
{
SaveSetting(settingData.SlicerConfigName, ((TextEditWidget)sender).Text.Replace("\n", "\\n"));
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
settingsRow.AddChild(stringEdit);
settingsRow.ValueChanged = (text) => stringEdit.Text = text.Replace("\\n", "\n");
}
break;
case OrganizerSettingsData.DataEditTypes.LIST:
{
var selectableOptions = new StyledDropDownList("None", maxHeight: 200)
{
ToolTipText = settingData.HelpText,
Margin = new BorderDouble()
};
foreach (string listItem in settingData.ExtraSettings.Split(','))
{
MenuItem newItem = selectableOptions.AddItem(listItem);
if (newItem.Text == sliceSettingValue)
{
selectableOptions.SelectedLabel = sliceSettingValue;
}
newItem.Selected += (sender, e) =>
{
MenuItem menuItem = ((MenuItem)sender);
SaveSetting(settingData.SlicerConfigName, menuItem.Text);
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
}
settingsRow.AddChild(selectableOptions);
settingsRow.ValueChanged = (text) => selectableOptions.SelectedLabel = text;
}
break;
case OrganizerSettingsData.DataEditTypes.HARDWARE_PRESENT:
{
var checkBoxWidget = new CheckBox("")
{
Name = settingData.PresentationName + " Checkbox",
ToolTipText = settingData.HelpText,
VAnchor = Agg.UI.VAnchor.ParentBottom,
TextColor = ActiveTheme.Instance.PrimaryTextColor,
Checked = sliceSettingValue == "1"
};
checkBoxWidget.CheckedStateChanged += (sender, e) =>
{
bool isChecked = ((CheckBox)sender).Checked;
SaveSetting(settingData.SlicerConfigName, isChecked ? "1" : "0");
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
settingsRow.AddChild(checkBoxWidget);
settingsRow.ValueChanged = (text) => checkBoxWidget.Checked = text == "1";
}
break;
case OrganizerSettingsData.DataEditTypes.VECTOR2:
{
string[] xyValueStrings = sliceSettingValue.Split(',');
if (xyValueStrings.Length != 2)
{
xyValueStrings = new string[] { "0", "0" };
}
double currentXValue;
double.TryParse(xyValueStrings[0], out currentXValue);
var xEditWidget = new MHNumberEdit(currentXValue, allowDecimals: true, pixelWidth: vectorXYEditWidth, tabIndex: tabIndexForItem++)
{
ToolTipText = settingData.HelpText,
Margin = new BorderDouble(0, 0, 30 * TextWidget.GlobalPointSizeScaleRatio, 0),
SelectAllOnFocus = true
};
double currentYValue;
double.TryParse(xyValueStrings[1], out currentYValue);
var yEditWidget = new MHNumberEdit(currentYValue, allowDecimals: true, pixelWidth: vectorXYEditWidth, tabIndex: tabIndexForItem++)
{
ToolTipText = settingData.HelpText,
SelectAllOnFocus = true
};
xEditWidget.ActuallNumberEdit.EditComplete += (sender, e) =>
{
SaveSetting(settingData.SlicerConfigName, xEditWidget.ActuallNumberEdit.Value.ToString() + "," + yEditWidget.ActuallNumberEdit.Value.ToString());
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
settingsRow.AddChild(xEditWidget);
yEditWidget.ActuallNumberEdit.EditComplete += (sender, e) =>
{
SaveSetting(settingData.SlicerConfigName, xEditWidget.ActuallNumberEdit.Value.ToString() + "," + yEditWidget.ActuallNumberEdit.Value.ToString());
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
settingsRow.AddChild(yEditWidget);
settingsRow.ValueChanged = (text) =>
{
double currentValue2;
string[] xyValueStrings2 = text.Split(',');
if (xyValueStrings2.Length != 2)
{
xyValueStrings2 = new string[] { "0", "0" };
}
double.TryParse(xyValueStrings2[0], out currentValue2);
xEditWidget.ActuallNumberEdit.Value = currentValue2;
double.TryParse(xyValueStrings2[1], out currentValue2);
yEditWidget.ActuallNumberEdit.Value = currentValue2;
};
}
break;
case OrganizerSettingsData.DataEditTypes.OFFSET2:
{
Vector2 offset = ActiveSliceSettings.Instance.GetOffset(extruderIndex);
var xEditWidget = new MHNumberEdit(offset.x, allowDecimals: true, allowNegatives: true, pixelWidth: vectorXYEditWidth, tabIndex: tabIndexForItem++)
{
ToolTipText = settingData.HelpText,
SelectAllOnFocus = true,
Margin = new BorderDouble(0, 0, 30 * TextWidget.GlobalPointSizeScaleRatio, 0)
};
var yEditWidget = new MHNumberEdit(offset.y, allowDecimals: true, allowNegatives: true, pixelWidth: vectorXYEditWidth, tabIndex: tabIndexForItem++)
{
ToolTipText = settingData.HelpText,
SelectAllOnFocus = true
};
xEditWidget.ActuallNumberEdit.EditComplete += (sender, e) =>
{
int extruderIndexLocal = extruderIndex;
SaveCommaSeparatedIndexSetting(extruderIndexLocal, settingData.SlicerConfigName, xEditWidget.ActuallNumberEdit.Value.ToString() + "x" + yEditWidget.ActuallNumberEdit.Value.ToString());
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
settingsRow.AddChild(xEditWidget);
yEditWidget.ActuallNumberEdit.EditComplete += (sender, e) =>
{
int extruderIndexLocal = extruderIndex;
SaveCommaSeparatedIndexSetting(extruderIndexLocal, settingData.SlicerConfigName, xEditWidget.ActuallNumberEdit.Value.ToString() + "x" + yEditWidget.ActuallNumberEdit.Value.ToString());
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
settingsRow.AddChild(yEditWidget);
settingsRow.ValueChanged = (text) =>
{
Vector2 offset2 = ActiveSliceSettings.Instance.GetOffset(extruderIndex);
xEditWidget.ActuallNumberEdit.Value = offset2.x;
yEditWidget.ActuallNumberEdit.Value = offset2.y;
};
}
break;
default:
var missingSetting = new TextWidget(String.Format("Missing the setting for '{0}'.", settingData.DataEditType.ToString()))
{
TextColor = ActiveTheme.Instance.PrimaryTextColor,
BackgroundColor = RGBA_Bytes.Red
};
settingsRow.AddChild(missingSetting);
break;
}
}
container.HAnchor = HAnchor.ParentLeftRight;
container.VAnchor = VAnchor.FitToChildren;
var restoreButton = new Button(new ButtonViewStates(new ImageWidget(restoreNormal), new ImageWidget(restoreHover), new ImageWidget(restorePressed), new ImageWidget(restoreNormal)))
{
Name = "Restore " + settingData.SlicerConfigName,
VAnchor = VAnchor.ParentCenter,
Margin = new BorderDouble(0, 0, 5, 0),
ToolTipText = "Restore Default".Localize()
};
restoreButton.Click += (sender, e) =>
{
// Revert the user override
if (persistenceLayer == null)
{
ActiveSliceSettings.Instance.ClearValue(settingData.SlicerConfigName);
}
else
{
ActiveSliceSettings.Instance.ClearValue(settingData.SlicerConfigName, persistenceLayer);
}
settingsRow.RefreshValue();
};
settingsRow.AddChild(new GuiWidget(HAnchor.ParentLeftRight));
settingsRow.AddChild(restoreButton);
container.AddChild(settingsRow);
// Define the UpdateStyle implementation
settingsRow.UpdateStyle = () =>
{
if (persistenceLayer.ContainsKey(settingData.SlicerConfigName))
{
switch (this.viewFilter)
{
case NamedSettingsLayers.All:
settingsRow.BackgroundColor = userSettingBackgroundColor;
break;
case NamedSettingsLayers.Material:
settingsRow.BackgroundColor = materialSettingBackgroundColor;
break;
case NamedSettingsLayers.Quality:
settingsRow.BackgroundColor = qualitySettingBackgroundColor;
break;
}
restoreButton.Visible = true;
}
else if (layerFilters == null)
{
if (ActiveSliceSettings.Instance.SettingExistsInLayer(settingData.SlicerConfigName, NamedSettingsLayers.Material))
{
settingsRow.BackgroundColor = materialSettingBackgroundColor;
}
else if (ActiveSliceSettings.Instance.SettingExistsInLayer(settingData.SlicerConfigName, NamedSettingsLayers.Quality))
{
settingsRow.BackgroundColor = qualitySettingBackgroundColor;
}
else
{
settingsRow.BackgroundColor = RGBA_Bytes.Transparent;
}
restoreButton.Visible = false;
}
else
{
restoreButton.Visible = false;
settingsRow.BackgroundColor = RGBA_Bytes.Transparent;
}
};
// Invoke the UpdateStyle implementation
settingsRow.UpdateStyle();
return container;
}
private static void AddComMenuItems(SliceSettingData settingData, PrinterSettingsLayer persistenceLayer, SettingsRow settingsRow, DropDownList selectableOptions)
{
selectableOptions.MenuItems.Clear();
string machineSpecificComPortValue = ActiveSliceSettings.Instance.Helpers.ComPort();
foreach (string listItem in FrostedSerialPort.GetPortNames())
{
MenuItem newItem = selectableOptions.AddItem(listItem);
if (newItem.Text == machineSpecificComPortValue)
{
selectableOptions.SelectedLabel = machineSpecificComPortValue;
}
newItem.Selected += (sender, e) =>
{
MenuItem menuItem = ((MenuItem)sender);
// Directly set the ComPort
if (persistenceLayer == null)
{
ActiveSliceSettings.Instance.Helpers.SetComPort(menuItem.Text);
}
else
{
ActiveSliceSettings.Instance.Helpers.SetComPort(menuItem.Text, persistenceLayer);
}
settingsRow.UpdateStyle();
OnSettingsChanged(settingData);
};
}
}
public SettingsRowChangeEvent(SettingsRow row, DataRowAction action)
{
this.eventRow = row;
this.eventAction = action;
}
public async Task Load()
{
var testSettingsStorage = new TestSettingsStorage();
ISynchronizedItems removedSynchronizedDirectories = null;
var loadedDirectories = new List <IDirectory>();
using (var testDirectory = new TestDirectory())
{
var settingsRow1 = new SettingsRow(testDirectory.CreateDirectory("1"), testDirectory.CreateDirectory("2"), true, null);
var settingsRow2 = new SettingsRow(testDirectory.CreateDirectory("3"), testDirectory.CreateDirectory("4"), false, null);
var settingsRow3 = new SettingsRow(testDirectory.CreateDirectory("5"), testDirectory.CreateDirectory("6"), true, new[] { "tiff" });
var settingsRow4 = new SettingsRow(testDirectory.CreateDirectory("7"), testDirectory.CreateDirectory("8"), true, new[] { "tiff" });
var settingsRow5 = new SettingsRow(testDirectory.CreateDirectory("9"), testDirectory.CreateDirectory("10"), true, null);
testSettingsStorage.SettingsRows = new[]
{
settingsRow1,
settingsRow2,
settingsRow3,
settingsRow4,
settingsRow5
};
var synchronizedDirectoriesManager = new SynchronizedDirectoriesManager(testSettingsStorage, new SynchronizedItemFactory(new ItemFactory()),
new SynchronizedItemsStatusAndCommandsUpdater(null));
await synchronizedDirectoriesManager.Load(); // Загрузка до изменения настроек.
var oldSynchronizedDirectory2 = synchronizedDirectoriesManager.SynchronizedDirectories[1];
var oldSynchronizedDirectory3 = synchronizedDirectoriesManager.SynchronizedDirectories[2];
var oldSynchronizedDirectory4 = synchronizedDirectoriesManager.SynchronizedDirectories[3];
foreach (var synchronizedDirectory in synchronizedDirectoriesManager.SynchronizedDirectories)
{
synchronizedDirectory.LeftDirectory.LoadedDirectoryEvent += (IDirectory loadedDirecory) => { loadedDirectories.Add(loadedDirecory); };
synchronizedDirectory.RightDirectory.LoadedDirectoryEvent += (IDirectory loadedDirecory) => { loadedDirectories.Add(loadedDirecory); };
}
synchronizedDirectoriesManager.RemoveSynchronizedDirectoriesEvent += (ISynchronizedItems synchronizedDirectories) =>
{
removedSynchronizedDirectories = synchronizedDirectories;
};
settingsRow1.IsUsed = false; // Эта строка при загрузке должна будет удалиться.
settingsRow2.IsUsed = true; // Эта строка при загрузке должна будет добавиться.
// Эта строка при загрузке должна будет инициализировать новую из-за изменения коллекции ExcludedExtensions.
settingsRow3.ExcludedExtensions = new[] { "jpg" };
await synchronizedDirectoriesManager.Load(); // Загрузка после изменения настроек.
Assert.Equal(4, synchronizedDirectoriesManager.SynchronizedDirectories.Length);
// Проверим удалённую директорию.
Assert.NotNull(removedSynchronizedDirectories);
Assert.Equal(settingsRow1.LeftDirectory.DirectoryPath, removedSynchronizedDirectories.LeftDirectory.FullPath);
Assert.Equal(settingsRow1.RightDirectory.DirectoryPath, removedSynchronizedDirectories.RightDirectory.FullPath);
// Записи на синхронизируемые директории должны оставаться прежними.
Assert.Equal(oldSynchronizedDirectory2, synchronizedDirectoriesManager.SynchronizedDirectories[0]);
Assert.Equal(oldSynchronizedDirectory3, synchronizedDirectoriesManager.SynchronizedDirectories[1]);
Assert.Equal(oldSynchronizedDirectory4, synchronizedDirectoriesManager.SynchronizedDirectories[2]);
// Лишь две директории одной записи должны были обновиться.
Assert.Equal(2, loadedDirectories.Count);
Assert.Contains(oldSynchronizedDirectory2.LeftDirectory, loadedDirectories);
Assert.Contains(oldSynchronizedDirectory2.RightDirectory, loadedDirectories);
// И массивы исключаемых из рассмотрения расширений файлов тоже должны были обновиться.
Assert.Equal(settingsRow3.ExcludedExtensions, oldSynchronizedDirectory2.LeftDirectory.ExcludedExtensions);
Assert.Equal(settingsRow3.ExcludedExtensions, oldSynchronizedDirectory2.RightDirectory.ExcludedExtensions);
// Эта запись на синхронизируемую директорию должна быть добавленной из-за включения строки настройки.
var synchronizedDirectory3 = synchronizedDirectoriesManager.SynchronizedDirectories[3];
Assert.Equal(settingsRow2.LeftDirectory.DirectoryPath, synchronizedDirectory3.LeftDirectory.FullPath);
Assert.Equal(settingsRow2.RightDirectory.DirectoryPath, synchronizedDirectory3.RightDirectory.FullPath);
}
}
public void SetActiveItem(IObject3D selectedItem)
{
if (this.item == selectedItem)
{
return;
}
this.item = selectedItem;
editorPanel.CloseAllChildren();
// Allow caller to clean up with passing null for selectedItem
if (item == null)
{
editorSectionWidget.Text = editorTitle;
return;
}
var selectedItemType = selectedItem.GetType();
primaryActionsPanel.RemoveAllChildren();
var graph = ApplicationController.Instance.Graph;
if (!graph.PrimaryOperations.TryGetValue(selectedItemType, out primaryActions))
{
primaryActions = new List <NodeOperation>();
}
else
{
// Loop over primary actions creating a button for each
foreach (var primaryAction in primaryActions)
{
// TODO: Run visible/enable rules on actions, conditionally add/enable as appropriate
var button = new IconButton(primaryAction.IconCollector(theme.InvertIcons), theme)
{
// Name = namedAction.Title + " Button",
ToolTipText = primaryAction.Title,
Margin = theme.ButtonSpacing,
BackgroundColor = theme.ToolbarButtonBackground,
HoverColor = theme.ToolbarButtonHover,
MouseDownColor = theme.ToolbarButtonDown,
};
button.Click += (s, e) =>
{
primaryAction.Operation.Invoke(item, scene);
};
primaryActionsPanel.AddChild(button);
}
}
editorSectionWidget.Text = selectedItem.Name ?? selectedItemType.Name;
HashSet <IObject3DEditor> mappedEditors = ApplicationController.Instance.Extensions.GetEditorsForType(selectedItemType);
var undoBuffer = sceneContext.Scene.UndoBuffer;
// put in a color edit field
var colorField = new ColorField(theme, selectedItem.Color);
colorField.Initialize(0);
colorField.ValueChanged += (s, e) =>
{
if (selectedItem.Color != colorField.Color)
{
undoBuffer.AddAndDo(new ChangeColor(selectedItem, colorField.Color));
}
};
colorField.Content.MouseDown += (s, e) =>
{
// make sure the render mode is set to shaded or outline
if (sceneContext.ViewState.RenderType != RenderOpenGl.RenderTypes.Shaded &&
sceneContext.ViewState.RenderType != RenderOpenGl.RenderTypes.Outlines)
{
// make sure the render mode is set to outline
sceneContext.ViewState.RenderType = RenderOpenGl.RenderTypes.Outlines;
}
};
// color row
var row = new SettingsRow("Color".Localize(), null, colorField.Content, theme);
// Special top border style for first item in editor
row.Border = new BorderDouble(0, 1);
editorPanel.AddChild(row);
// put in a material edit field
var materialField = new MaterialIndexField(theme, selectedItem.MaterialIndex);
materialField.Initialize(0);
materialField.ValueChanged += (s, e) =>
{
if (selectedItem.MaterialIndex != materialField.MaterialIndex)
{
undoBuffer.AddAndDo(new ChangeMaterial(selectedItem, materialField.MaterialIndex));
}
};
materialField.Content.MouseDown += (s, e) =>
{
if (sceneContext.ViewState.RenderType != RenderOpenGl.RenderTypes.Materials)
{
// make sure the render mode is set to material
sceneContext.ViewState.RenderType = RenderOpenGl.RenderTypes.Materials;
}
};
// material row
editorPanel.AddChild(
new SettingsRow("Material".Localize(), null, materialField.Content, theme));
// put in the normal editor
if (selectedItem is ComponentObject3D componentObject &&
componentObject.Finalized)
{
PublicPropertyEditor.AddUnlockLinkIfRequired(selectedItem, editorPanel, theme);
foreach (var selector in componentObject.SurfacedEditors)
{
// Get the named property via reflection
// Selector example: '$.Children<CylinderObject3D>'
var match = pathResolver.Select(componentObject, selector).ToList();
//// TODO: Create editor row for each property
//// - Use the type of the property to find a matching editor (ideally all datatype -> editor functionality would resolve consistently)
//// - Add editor row for each
foreach (var instance in match)
{
if (instance is IObject3D object3D)
{
if (ApplicationController.Instance.Extensions.GetEditorsForType(object3D.GetType())?.FirstOrDefault() is IObject3DEditor editor)
{
ShowObjectEditor((editor, object3D, object3D.Name), selectedItem);
}
}
else if (JsonPath.JsonPathContext.ReflectionValueSystem.LastMemberValue is ReflectionTarget reflectionTarget)
{
var context = new PPEContext();
if (reflectionTarget.Source is IObject3D editedChild)
{
context.item = editedChild;
}
else
{
context.item = item;
}
var editableProperty = new EditableProperty(reflectionTarget.PropertyInfo, reflectionTarget.Source);
var editor = PublicPropertyEditor.CreatePropertyEditor(editableProperty, undoBuffer, context, theme);
if (editor != null)
{
editorPanel.AddChild(editor);
}
}
}
}
// Enforce panel padding
foreach (var sectionWidget in editorPanel.Descendants <SectionWidget>())
{
sectionWidget.Margin = 0;
}
}
private FanControls(PrinterConnection printerConnection, ThemeConfig theme)
: base(FlowDirection.TopToBottom)
{
this.HAnchor = HAnchor.Stretch;
this.HAnchor = HAnchor.Stretch;
//Matt's test editing to add a on/off toggle switch
bool fanActive = printerConnection.FanSpeed0To255 != 0;
Stopwatch timeSinceLastManualSend = new Stopwatch();
var settingsRow = new SettingsRow(
"Part Cooling Fan".Localize(),
null,
theme,
fullRowSelect: true);
this.AddChild(settingsRow);
var container = new FlowLayoutWidget();
settingsRow.AddChild(container);
settingsRow.BorderColor = Color.Transparent;
fanSpeedDisplay = new EditableNumberDisplay(0, "100")
{
DisplayFormat = "{0:0}",
Value = printerConnection.FanSpeed0To255 * 100 / 255
};
fanSpeedDisplay.ValueChanged += (sender, e) =>
{
// limit the rate we can send this message to 2 per second so we don't get in a crazy toggle state.
if (!timeSinceLastManualSend.IsRunning ||
timeSinceLastManualSend.ElapsedMilliseconds > 500)
{
timeSinceLastManualSend.Restart();
printerConnection.FanSpeed0To255 = (int)(fanSpeedDisplay.Value * 255 / 100 + .5);
}
};
container.AddChild(fanSpeedDisplay);
container.Selectable = true;
// put in %
container.AddChild(new TextWidget("%", pointSize: 10, textColor: ActiveTheme.Instance.PrimaryTextColor)
{
VAnchor = VAnchor.Center
});
var toggleSwitch = new RoundedToggleSwitch(theme)
{
Margin = new BorderDouble(5, 0),
VAnchor = VAnchor.Center
};
toggleSwitch.CheckedStateChanged += (s, e) =>
{
if (!timeSinceLastManualSend.IsRunning ||
timeSinceLastManualSend.ElapsedMilliseconds > 500)
{
timeSinceLastManualSend.Restart();
if (toggleSwitch.Checked)
{
printerConnection.FanSpeed0To255 = 255;
}
else
{
printerConnection.FanSpeed0To255 = 0;
}
}
};
container.AddChild(toggleSwitch);
settingsRow.ActionWidget = toggleSwitch;
// CreateFanControls
printerConnection.FanSpeedSet.RegisterEvent((s, e) =>
{
if ((int)printerConnection.FanSpeed0To255 > 0)
{
toggleSwitch.Checked = true;
}
else
{
toggleSwitch.Checked = false;
}
fanSpeedDisplay.Value = printerConnection.FanSpeed0To255 * 100 / 255;
}
, ref unregisterEvents);
}
private AdjustmentControls(PrinterConfig printer, ThemeConfig theme)
: base(FlowDirection.TopToBottom)
{
double sliderWidth = 300 * GuiWidget.DeviceScale;
double sliderThumbWidth = 10 * GuiWidget.DeviceScale;
this.printer = printer;
SettingsRow settingsRow;
{
this.AddChild(settingsRow = new SettingsRow(
"Speed Multiplier".Localize(),
null,
theme));
// Remove the HorizontalSpacer
settingsRow.Children.Last().Close();
feedRateRatioSlider = new SolidSlider(default(Vector2), sliderThumbWidth, theme, minFeedRateRatio, maxFeedRateRatio)
{
Name = "Feed Rate Slider",
Margin = new BorderDouble(5, 0),
Value = printer.Settings.GetValue <double>(SettingsKey.feedrate_ratio),
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Center,
TotalWidthInPixels = sliderWidth,
};
theme.ApplySliderStyle(feedRateRatioSlider);
feedRateRatioSlider.ValueChanged += (sender, e) =>
{
feedRateValue.ActuallNumberEdit.Value = Math.Round(feedRateRatioSlider.Value, 2);
};
feedRateRatioSlider.SliderReleased += (s, e) =>
{
// Update state for runtime use
printer.Connection.FeedRateMultiplierStream.FeedRateRatio = Math.Round(feedRateRatioSlider.Value, 2);
// Persist data for future use
printer.Settings.SetValue(
SettingsKey.feedrate_ratio,
printer.Connection.FeedRateMultiplierStream.FeedRateRatio.ToString());
};
settingsRow.AddChild(feedRateRatioSlider);
feedRateValue = new MHNumberEdit(Math.Round(printer.Settings.GetValue <double>(SettingsKey.feedrate_ratio), 2), theme, allowDecimals: true, minValue: minFeedRateRatio, maxValue: maxFeedRateRatio, pixelWidth: 40 * GuiWidget.DeviceScale)
{
Name = "Feed Rate NumberEdit",
SelectAllOnFocus = true,
Margin = new BorderDouble(0, 0, 5, 0),
VAnchor = VAnchor.Center | VAnchor.Fit,
};
feedRateValue.ActuallNumberEdit.EditComplete += (sender, e) =>
{
feedRateRatioSlider.Value = feedRateValue.ActuallNumberEdit.Value;
// Update state for runtime use
printer.Connection.FeedRateMultiplierStream.FeedRateRatio = Math.Round(feedRateRatioSlider.Value, 2);
// Persist data for future use
printer.Settings.SetValue(
SettingsKey.feedrate_ratio,
printer.Connection.FeedRateMultiplierStream.FeedRateRatio.ToString());
};
settingsRow.AddChild(feedRateValue);
}
{
this.AddChild(settingsRow = new SettingsRow(
"Extrusion Multiplier".Localize(),
null,
theme));
// Remove the HorizontalSpacer
settingsRow.Children.Last().Close();
extrusionRatioSlider = new SolidSlider(default(Vector2), sliderThumbWidth, theme, minExtrutionRatio, maxExtrusionRatio, Orientation.Horizontal)
{
Name = "Extrusion Multiplier Slider",
TotalWidthInPixels = sliderWidth,
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Center,
Margin = new BorderDouble(5, 0),
Value = printer.Settings.GetValue <double>(SettingsKey.extrusion_ratio)
};
theme.ApplySliderStyle(extrusionRatioSlider);
extrusionRatioSlider.ValueChanged += (sender, e) =>
{
extrusionValue.ActuallNumberEdit.Value = Math.Round(extrusionRatioSlider.Value, 2);
};
extrusionRatioSlider.SliderReleased += (s, e) =>
{
// Update state for runtime use
printer.Connection.ExtrusionMultiplierStream.ExtrusionRatio = Math.Round(extrusionRatioSlider.Value, 2);
// Persist data for future use
printer.Settings.SetValue(
SettingsKey.extrusion_ratio,
printer.Connection.ExtrusionMultiplierStream.ExtrusionRatio.ToString());
};
settingsRow.AddChild(extrusionRatioSlider);
extrusionValue = new MHNumberEdit(Math.Round(printer.Settings.GetValue <double>(SettingsKey.extrusion_ratio), 2), theme, allowDecimals: true, minValue: minExtrutionRatio, maxValue: maxExtrusionRatio, pixelWidth: 40 * GuiWidget.DeviceScale)
{
Name = "Extrusion Multiplier NumberEdit",
SelectAllOnFocus = true,
Margin = new BorderDouble(0, 0, 5, 0),
VAnchor = VAnchor.Center | VAnchor.Fit,
};
extrusionValue.ActuallNumberEdit.EditComplete += (sender, e) =>
{
extrusionRatioSlider.Value = extrusionValue.ActuallNumberEdit.Value;
// Update state for runtime use
printer.Connection.ExtrusionMultiplierStream.ExtrusionRatio = Math.Round(extrusionRatioSlider.Value, 2);
// Persist data for future use
printer.Settings.SetValue(
SettingsKey.extrusion_ratio,
printer.Connection.ExtrusionMultiplierStream.ExtrusionRatio.ToString());
};
settingsRow.AddChild(extrusionValue);
}
// Register listeners
printer.Settings.SettingChanged += Printer_SettingChanged;
printer.Disposed += (s, e) => printer.Settings.SettingChanged -= Printer_SettingChanged;
}