private void btnSave_Click(object sender, EventArgs e)
{
if (this.txtRelationQtyEdit.Value.Trim() == string.Empty)
{
//数量不能为空 $Error_Qty_Cannot_Empty
ApplicationRun.GetInfoForm().Add(new UserControl.Message(MessageType.Error, "$Error_Qty_Cannot_Empty"));
this.txtRelationQtyEdit.TextFocus(false, true);
return;
}
try
{
if (mofacade == null)
{
mofacade = new MOFacade(this.DataProvider);
}
object objMO = mofacade.GetMO(this.txtMoCodeEdit.Value.Trim().ToUpper());
decimal moQty = 0;
int intQty = Convert.ToInt32(this.txtRelationQtyEdit.Value);
if (intQty <= 0)
{
//数量应为整数类型 $Error_Qty_Not_Int
ApplicationRun.GetInfoForm().Add(new UserControl.Message(MessageType.Error, "$Error_CS_SmtRelQty_Should_Over_Zero"));
this.txtRelationQtyEdit.TextFocus(false, true);
return;
}
else
{
if (objMO != null && ((MO)objMO).IDMergeRule >= 0)
{
moQty = ((MO)objMO).IDMergeRule;
}
if (moQty < Convert.ToDecimal(intQty))
{
//数量应小于工单的连板数 $Error_Qty_Not_Int
ApplicationRun.GetInfoForm().Add(new UserControl.Message(MessageType.Error, "$Error_CS_SmtRelQty_Should_less_MO" + ": " + moQty));
this.txtRelationQtyEdit.TextFocus(false, true);
return;
}
}
}
catch
{
//数量应为整数类型 $Error_Qty_Not_Int
ApplicationRun.GetInfoForm().Add(new UserControl.Message(MessageType.Error, "$Error_Qty_Not_Int"));
this.txtRelationQtyEdit.TextFocus(false, true);
return;
}
if (smtfacade == null)
{
smtfacade = new SMTFacade(this.DataProvider);
}
object relation = smtfacade.GetSMTRelationQty(this.txtRCardEdit.Value, this.txtMoCodeEdit.Value.Trim());
DBDateTime dbDateTime = FormatHelper.GetNowDBDateTime(this.DataProvider);
if (relation != null)
{
((Smtrelationqty)relation).Relationqtry = int.Parse(this.txtRelationQtyEdit.Value);
((Smtrelationqty)relation).Muser = ApplicationService.Current().UserCode;
((Smtrelationqty)relation).Mdate = dbDateTime.DBDate;
((Smtrelationqty)relation).Mtime = dbDateTime.DBTime;
smtfacade.UpdateSmtrelationqty((Smtrelationqty)relation);
}
this.ucBtnSave.Enabled = false;
btnQuery_Click(sender, e);
}
private void ucBtnOK_Click(object sender, System.EventArgs e)
{
if (this.ucLERunningCard.Value.Trim() == string.Empty)
{
//Laws Lu,2005/08/11,新增焦点设置
ucLERunningCard.TextFocus(true, true);
return;
}
this.ucMessage.Add(string.Format("<< {0}", this.ucLERunningCard.Value.Trim().ToUpper()));
// 输入分板前产品序列号
if (this._currSequence == 0)
{
#region 工单、序列号匹配
_runningCardList = new ArrayList();
if (this.txtMoCode.Checked)
{
if (string.IsNullOrEmpty(txtMoCode.Value.ToUpper().Trim()))
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$CS_Please_Input_MOCode"));
this.ucLERunningCard.Value = "";
//Laws Lu,2005/08/11,新增焦点设置
txtMoCode.Focus();
return;
}
}
//Laws Lu,2005/10/19,新增 缓解性能问题
//Laws Lu,2006/12/25 修改 减少Open/Close的次数
((BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider)DataProvider).PersistBroker.CloseConnection();
((BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider)DataProvider).PersistBroker.AutoCloseConnection = true;
//added by jessie lee, 2005/11/29
#region 判断转换前序列号是否符合条件
//长度检查
if (bCardTransLenULE.Checked)
{
if (bCardTransLenULE.Value.Trim().Length == 0)
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$CS_Before_Card_Transfer_Empty"));
ucLERunningCard.TextFocus(true, true);
return;
}
int len = 0;
try
{
len = int.Parse(bCardTransLenULE.Value.Trim());
}
catch
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$Error_BeforeCardTransLen_Should_be_Integer"));
ucLERunningCard.TextFocus(true, true);
return;
}
if (len != this.ucLERunningCard.Value.Trim().Length)
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$Error_BeforeCardTransLen_Not_Correct"));
ucLERunningCard.TextFocus(true, true);
return;
}
}
//首字符串检查
if (bCardTransLetterULE.Checked)
{
if (bCardTransLetterULE.Value.Trim().Length == 0)
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$CS_Before_Card_Transfer_FLetter_Empty"));
ucLERunningCard.TextFocus(true, true);
return;
}
int index = ucLERunningCard.Value.Trim().IndexOf(bCardTransLetterULE.Value.Trim());
if (index != 0)
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$CS_Before_Card_Transfer_FLetter_NotCompare"));
ucLERunningCard.TextFocus(true, true);
return;
}
}
#endregion
#region 取得分板比例,从工单和SMT是否是打叉板得到分板比例，若不是，带出工单的分版比例
simReport = _DataCollectFacade.GetLastSimulationReport(this.ucLERunningCard.Value.Trim().ToUpper());
if (simReport == null)
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$Error_CS_ID_Not_Exist"));
this.ucLERunningCard.Value = "";
this.ucLERunningCard.TextFocus(true, true);
return;
}
else
{
if (simReport.IsComplete != "1")
{
//完工后才可以分板，故注释。
//主要应用于以下业务情况：
//序列号 s1 通过两张工单 mo1, mo2 完成。s1 经过第一张工单 mo1 完工后，需要进行分板 s1--> s1-1, s1-2，
//分板后再用 s1-1, s1-2 进行第二张工单 mo2 的归属生产。
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$CS_ERROR_PRODUCT_NO_COMPLETE"));
ucLERunningCard.TextFocus(true, true);
return;
}
if (txtMoCode.Checked)
{
if (string.Compare(txtMoCode.Value.ToUpper().Trim(), simReport.MOCode, true) != 0)
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$RCARD_NOT_IN_MO"));
ucLERunningCard.TextFocus(true, true);
return;
}
}
int rcardCount = _DataCollectFacade.GetSplitBoardCount(this.ucLERunningCard.Value.Trim().ToUpper());
if (rcardCount > 0)
{
//已经分板的序列号就不可以在分了
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$CS_ERROR_PRODUCT_ALREADY_SPLITE"));
ucLERunningCard.TextFocus(true, true);
return;
}
}
SMTFacade smtFacade = new SMTFacade(this.DataProvider);
object objsmtrel = smtFacade.GetSMTRelationQty(this.ucLERunningCard.Value.Trim().ToUpper(), simReport.MOCode);
if (objsmtrel != null)
{
Smtrelationqty smtrel = (Smtrelationqty)objsmtrel;
this.txtIDMergeValue.Text = Convert.ToString(smtrel.Relationqtry);
}
else
{
MOFacade mofacade = new MOFacade(this.DataProvider);
object objMO = mofacade.GetMO(simReport.MOCode);
if (objMO != null)
{
MO mo = (MO)objMO;
this.txtIDMergeValue.Text = Convert.ToString(mo.IDMergeRule);
}
else
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$CS_MO_Not_Exit"));
txtMoCode.Focus();
txtMoCode.SelectAll();
return;
}
}
#endregion
#region 判断分板前序列号是否存在
int mergeRule = 1;
try
{
mergeRule = System.Int32.Parse(this.txtIDMergeValue.Text.ToUpper().Trim());
}
catch
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$Error_CS_IDMerge_Should_be_Integer"));//分板比例必须为整数
//Laws Lu,2005/08/11,新增焦点设置
ucLERunningCard.TextFocus(true, true);
return;
}
if (mergeRule <= 0)
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$Error_CS_IDMerge_Should_Over_Zero"));//分板比例必须大于零
ucLERunningCard.TextFocus(true, true);
return;
}
this._mergeRule = mergeRule;
#endregion
#endregion
}
else
{
//added by jessie lee, 2005/11/29
#region 判断转换后序列号是否符合条件
//长度检查
if (aCardTransLenULE.Checked)
{
if (aCardTransLenULE.Value.Trim().Length == 0)
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$CS_After_Card_Transfer_Empty"));
ucLERunningCard.TextFocus(true, true);
return;
}
int len = 0;
try
{
len = int.Parse(aCardTransLenULE.Value.Trim());
}
catch
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$Error_AfterCardTransLen_Should_be_Integer"));
ucLERunningCard.TextFocus(true, true);
return;
}
if (len != this.ucLERunningCard.Value.Trim().Length)
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$Error_AfterCardTransLen_Not_Correct"));
ucLERunningCard.TextFocus(true, true);
return;
}
}
//首字符串检查
if (aCardTransLetterULE.Checked)
{
if (aCardTransLetterULE.Value.Trim().Length == 0)
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$CS_After_Card_Transfer_FLetter_Empty"));
ucLERunningCard.TextFocus(true, true);
return;
}
int index = ucLERunningCard.Value.Trim().IndexOf(aCardTransLetterULE.Value.Trim());
if (index != 0)
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$CS_After_Card_Transfer_FLetter_NotCompare"));
ucLERunningCard.TextFocus(true, true);
return;
}
}
#endregion
#region 判断分板后序列号是否重复
if (this._runningCardList.Contains(this.ucLERunningCard.Value.Trim().ToUpper()))
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$Error_CS_Merge_ID_Exist"));//转换后产品序列号重复
this.ucLERunningCard.Value = "";
//Laws Lu,2005/08/11,新增焦点设置
ucLERunningCard.TextFocus(true, true);
return;
}
#endregion
int rcardCount = _DataCollectFacade.GetSplitBoardCount(this.ucLERunningCard.Value.Trim().ToUpper());
if (rcardCount > 0)
{
//已经分板的序列号就不可以在分了
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$CS_ERROR_PRODUCT_ALREADY_SPLITE"));
this.ucMessage.AddBoldText(string.Format(">>$CS_Please_Input_Merge_ID {0}/{1}", this._currSequence.ToString(), this._mergeRule.ToString()));//请输入转换后产品序列号
ucLERunningCard.TextFocus(true, true);
return;
}
this._runningCardList.Add(this.ucLERunningCard.Value.Trim().ToUpper());
}
if (this._currSequence < this._mergeRule)
{
this._currSequence++;
this.txtIDMergeValue.Enabled = false;
this.ucMessage.AddBoldText(string.Format(">>$CS_Please_Input_Merge_ID {0}/{1}", this._currSequence.ToString(), this._mergeRule.ToString())); //请输入转换后产品序列号
}
else if (this._currSequence == this._mergeRule) // 达到分板比例,写入数据库
{
try
{
this.DataProvider.BeginTransaction();
int tempCount = 1;
DBDateTime dbDateTime = FormatHelper.GetNowDBDateTime(this.DataProvider);
foreach (string strRcard in _runningCardList)
{
#region 将ID添加到SplitBoard
SplitBoard splitBorad = new SplitBoard();
splitBorad.Seq = tempCount;
splitBorad.Mocode = simReport.MOCode;
splitBorad.Rcard = strRcard;
splitBorad.Modelcode = simReport.ModelCode;
splitBorad.Itemcode = simReport.ItemCode;
splitBorad.Opcode = simReport.OPCode;
splitBorad.Rescode = ApplicationService.Current().ResourceCode;
splitBorad.Routecode = simReport.RouteCode;
splitBorad.Scard = simReport.SourceCard;
splitBorad.Segcode = simReport.SegmentCode;
splitBorad.Shiftcode = simReport.ShiftCode;
splitBorad.Shifttypecode = simReport.ShiftTypeCode;
splitBorad.Sscode = simReport.StepSequenceCode;
splitBorad.Tpcode = simReport.TimePeriodCode;
splitBorad.Muser = ApplicationService.Current().UserCode;
splitBorad.Mdate = dbDateTime.DBDate;
splitBorad.Mtime = dbDateTime.DBTime;
_DataCollectFacade.AddSplitBoard(splitBorad);
tempCount++;
#endregion
}
this.DataProvider.CommitTransaction();
this.ucMessage.Add(new UserControl.Message(MessageType.Success, ">>$CS_SplitID_CollectSuccess"));//产品序列号转换采集成功
//added by jessie lee, 2005/11/29,
}
catch (Exception ex)
{
this.DataProvider.RollbackTransaction();
this.ucMessage.Add(new UserControl.Message(MessageType.Error, ">>$CS_SplitID_CollectSuccess"));//产品序列号转换采集成功
}
this.initInput();
}
this.ucLERunningCard.Value = "";
//Laws Lu,2005/08/11,新增焦点设置
if (!aCardTransLetterULE.Checked)
{
ucLERunningCard.TextFocus(true, true);
}
else
{
ucLERunningCard.TextFocus(true, true);
}
}