/// <summary>
/// 確定
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
protected void btnOK_Click(object sender, EventArgs e)
{
/*******************************************************************
* PPK判定後須執行事項：
* 1. 依照判定的BATCHID+料號，將所屬單號資料更新。
* 2. 依照判定狀態更新CST_WIP_PPK結果。
* 3. 如同一個BATCHID都判定完成，變更機台狀態，從PPK變IDLE。
* 如一個BATCHID有兩個料號，需兩個料號都判定完成才可以變更機台狀態。
******************************************************************/
try
{
//取得所選擇的料號名稱
var deviceName = ddlDevice.SelectedValue;
#region 確認選擇結果，如果是選擇NG，確認是否有選擇原因碼及選擇結果及檢驗清單的勾選是否符合
string result = "";
if (rdbOK.Checked)
{
result = "OK";
}
else if (rdbNG.Checked)
{
result = "NG";
//確認是否有選擇原因碼
ddlPPKReasonCode.Must(lblPPKReasonCode);
if (SelectedNGData() == false)
{
//PPK結果選擇NG，檢驗清單至少勾選一筆資料！
throw new Exception(RuleMessage.Error.C10070());
}
}
else if (rdbCLOSE.Checked)
{
result = "CLOSE";
//確認是否有選擇原因碼
ddlPPKReasonCode.Must(lblPPKReasonCode);
}
#endregion
TransactionStamp txnStamp = new TransactionStamp(User.Identity.Name, ProgramRight, ProgramRight, ApplicationName);
using (var cts = CimesTransactionScope.Create())
{
#region 更新檢驗主檔清單[MES_QC_INSP]
_QCInspectionDataList.ForEach(QCInspectionData =>
{
//符合選擇的料號才進行資料更新
if (QCInspectionData.DeviceName == deviceName)
{
//有選擇原因碼才更新[NG_Category]及[NG_Reason]
if (string.IsNullOrEmpty(ddlPPKReasonCode.SelectedValue) == false)
{
var reason = InfoCenter.GetBySID <ReasonCategoryInfo>(ddlPPKReasonCode.SelectedValue);
QCInspectionData.NG_Category = reason.Category;
QCInspectionData.NG_Reason = reason.Reason;
}
//如果判定結果為結單的話，則必須把結單時間及人員資料寫回資料庫
if (result == "CLOSE")
{
QCInspectionData.FINISHTIME = txnStamp.RecordTime;
QCInspectionData.FINISHUSER = txnStamp.UserID;
}
QCInspectionData.NG_Description = ttbDescr.Text;
QCInspectionData.Result = result;
QCInspectionData.Status = "Finished";
QCInspectionData.UpdateToDB(txnStamp.UserID, txnStamp.RecordTime);
}
});
#endregion
#region 更新機台資訊及檢驗工件結果
//取某一支工件序號的資料來傳入UpdatePPK
var updateLot = InfoCenter.GetBySID <LotInfo>(_QCInspectionObjDataList[0].OBJECTSID).ChangeTo <LotInfoEx>();
//更新[CST_WIP_PPK.PPKCOUNT]
CustomizeFunction.UpdatePPK(_QCInspectionDataList[0].EquipmentName, updateLot.DeviceName, updateLot.DeviceVersion, (rdbNG.Checked) ? "false" : "true");
//將介面上所勾選/不勾選的資料對應到MES_QC_INSP_OBJ.ITEM4的欄位
for (int i = 0; i < gvQC.Rows.Count; i++)
{
var thisCheckBox = (CheckBox)gvQC.Rows[i].FindControl("ckbDefectSelect");
if (thisCheckBox.Checked)
{
_QCInspectionObjDataList[i].ItemName4 = "NG";
}
else
{
_QCInspectionObjDataList[i].ItemName4 = "OK";
}
_QCInspectionObjDataList[i].UpdateToDB(txnStamp.UserID, txnStamp.RecordTime);
}
//更新機台檢驗主檔
_CSTWIPCMMList.ForEach(data =>
{
data.UpdateToDB();
});
//取得相同BatchID的檢驗資料 (理論上應該都完成檢驗...)
//如果是雙料號，每次判定要分料號判定
var QCDataList = QCInspectionInfoEx.GetDataListByBatchIDAndDeviceName(_QCInspectionDataList[0].BatchID, deviceName);
//如果是雙料號，每次判定要分料號判定，但是機台的狀態要該batchID都判定通過，才算PPK完成
var QCDAllataList = QCInspectionInfoEx.GetDataListByBatchID(_QCInspectionDataList[0].BatchID);
#region 如果相同的BatchID都檢驗完成時，則更新機台狀態為IDLE
//相同BatchID都已完成檢驗旗標
//如果是雙料號，每次判定要分料號判定，但是機台的狀態要該batchID都判定通過，才算PPK完成
bool isAllFinish = true;
QCDAllataList.ForEach(p =>
{
if (p.Status != "Finished")
{
isAllFinish = false;
}
});
if (isAllFinish)
{
//取得機台狀態資料
var newStateInfo = EquipmentStateInfo.GetEquipmentStateByState("IDLE");
//檢查機台是否存在
var equipData = EquipmentInfo.GetEquipmentByName(_QCInspectionDataList[0].EquipmentName);
if (equipData == null)
{
//[00885]機台{0}不存在！
throw new Exception(TextMessage.Error.T00885(_QCInspectionDataList[0].EquipmentName));
}
//更新機台狀態
EMSTransaction.ChangeState(equipData, newStateInfo, txnStamp);
}
#endregion
#region 如果相同的BatchID都檢驗完成且結果都為OK時，則更新機台檢驗資料及更新COUNT
//相同BatchID都已完成檢驗及結果都為OK旗標
bool isAllFinishAndOK = true;
QCDataList.ForEach(p =>
{
if (!(p.Status == "Finished" && p.Result == "OK"))
{
isAllFinishAndOK = false;
}
});
if (isAllFinishAndOK)
{
//取得AutoMerge原因碼
var reasonCategory = ReasonCategoryInfo.GetReasonCategoryByCategoryNameAndReason("CustomizeReason", "AutoMerge");
if (reasonCategory == null)
{
//[00030]{0}：{1}不存在!
throw new Exception(TextMessage.Error.T00030("", "CustomizeReason- AutoMerge"));
}
_QCInspectionObjDataList.ForEach(Data =>
{
//更新機台檢驗資料
Data.UpdateToDB(txnStamp.UserID, txnStamp.RecordTime);
});
var mergeList = _QCInspectionObjDataList.Select(p => p.ItemName2).Distinct().ToList();
foreach (var lot in mergeList)
{
var lotData = LotInfoEx.GetLotByWorkOrderLot(lot);
//確認FAI是否已經檢驗完成
if (CustomizeFunction.CheckFAI(_QCInspectionDataList[0].EquipmentName, lotData.Lot))
{
//執行AutoMerge
CustomizeFunction.AutoMerge(lotData.InventoryLot, txnStamp, reasonCategory);
}
}
}
#endregion
#endregion
cts.Complete();
}
ClearField();
AjaxFocus(ttbEquipOrCompLot);
_ProgramInformationBlock.ShowMessage(TextMessage.Hint.T00614(""));
}
catch (Exception ex)
{
HandleError(ex);
}
}
/// <summary>
/// 確定
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
protected void btnOK_Click(object sender, EventArgs e)
{
try
{
#region 確認選擇結果，如果是選擇NG，確認是否有選擇原因碼
string result = "";
if (rdbOK.Checked)
{
result = "OK";
}
else if (rdbNG.Checked)
{
result = "NG";
//確認是否有選擇原因碼
ddlFAIReasonCode.Must(lblFAIReasonCode);
}
else if (rdbPASS.Checked)
{
result = "PASS";
}
else if (rdbCLOSE.Checked)
{
result = "CLOSE";
//確認是否有選擇原因碼
ddlFAIReasonCode.Must(lblFAIReasonCode);
}
#endregion
TransactionStamp txnStamp = new TransactionStamp(User.Identity.Name, ProgramRight, ProgramRight, ApplicationName);
using (var cts = CimesTransactionScope.Create())
{
#region 更新檢驗主檔[MES_QC_INSP]
//取得檢驗主檔資料
var QCInsepctionData = InfoCenter.GetBySID <QCInspectionInfo>(_SelectedQCData.QCInspectionSID).ChangeTo <QCInspectionInfoEx>();
//原因碼
ReasonCategoryInfo reason = null;
//有選擇原因碼才更新[NG_Category]及[NG_Reason]
if (string.IsNullOrEmpty(ddlFAIReasonCode.SelectedValue) == false)
{
reason = InfoCenter.GetBySID <ReasonCategoryInfo>(ddlFAIReasonCode.SelectedValue);
QCInsepctionData.NG_Category = reason.Category;
QCInsepctionData.NG_Reason = reason.Reason;
}
//如果判定結果為結單的話，則必須把結單時間及人員資料寫回資料庫
if (result == "CLOSE")
{
QCInsepctionData.FINISHTIME = txnStamp.RecordTime;
QCInsepctionData.FINISHUSER = txnStamp.UserID;
}
QCInsepctionData.NG_Description = ttbDescr.Text;
QCInsepctionData.Result = result;
QCInsepctionData.Status = "Finished";
QCInsepctionData.UpdateToDB(txnStamp.UserID, txnStamp.RecordTime);
#endregion
#region 更新機台檢驗主檔[CST_WIP_CMM]
if (_CSTWIPCMMList != null)
{
//更新檢驗主檔的QCInspectionSID欄位
_CSTWIPCMMList.ForEach(data =>
{
data.QCInspectionSID = QCInsepctionData.ID;
data.UpdateToDB();
});
}
#endregion
#region 更新機台資訊
//取得相同BatchID的檢驗資料
var QCDataList = QCInspectionInfoEx.GetDataListByBatchID(_SelectedQCData.BatchID);
//相同BatchID都已完成檢驗旗標
bool isAllFinish = true;
QCDataList.ForEach(p =>
{
if (!(p.Status == "Finished"))
{
isAllFinish = false;
}
});
//取得lot資料
var lot = InfoCenter.GetBySID <LotInfo>(_SelectedQCData.ObjectSID);
//更新機台屬性[FAICOUNT]
CustomizeFunction.UpdateFAI(_SelectedQCData.EquipmentName, lot.Lot, (rdbNG.Checked) ? true : false, txnStamp);
//如果相同的BatchID都檢驗完成或選擇結果為NG時，則更新狀態為IDLE及更新FAICOUNT
if (isAllFinish)
{
//取得機台狀態資料
var newStateInfo = EquipmentStateInfo.GetEquipmentStateByState("IDLE");
var equipData = EquipmentInfo.GetEquipmentByName(_SelectedQCData.EquipmentName);
//更新機台狀態
EMSTransaction.ChangeState(equipData, newStateInfo, txnStamp);
}
#endregion
//如果判定結果選擇為NG，則必須拆批送待判
if (rdbNG.Checked)
{
//判定NG直接拆批及送待判工作站
CustomizeFunction.SplitDefectLot(_SelectedQCData.ComponentLot, ttbDescr.Text, reason, txnStamp);
}
cts.Complete();
}
ClearField();
AjaxFocus(ttbLot);
_ProgramInformationBlock.ShowMessage(TextMessage.Hint.T00614(""));
}
catch (Exception ex)
{
HandleError(ex);
}
}
/// <summary>
/// 輸入機台/序號
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
protected void ttbEquipOrCompLot_TextChanged(object sender, EventArgs e)
{
try
{
QCInspectionInfoEx QCInspectionData = new QCInspectionInfoEx();
//檢查是否有輸入機台/序號
ttbEquipOrCompLot.Must(lblEquipOrCompLot);
#region 檢查輸入的內容在MES_QC_INSP_OBJ.ITEM1是否有符合的資料，如果沒有，則檢查機台
var QCDataObjList = QCInspectionObjectInfoEx.GetDataListByComponentLot(ttbEquipOrCompLot.Text);
if (QCDataObjList.Count == 0)
{
var QCDataList = QCInspectionInfoEx.GetDataListByEquip(ttbEquipOrCompLot.Text, CustomizeFunction.QCType.PPK.ToCimesString());
if (QCDataList.Count == 0)
{
//請輸入正確的機台/序號!
throw new Exception(RuleMessage.Error.C10066());
}
//取得檢驗主檔資訊
QCInspectionData = QCDataList[0];
}
else
{
//取得檢驗主檔資訊
QCInspectionData = InfoCenter.GetBySID <QCInspectionInfo>(QCDataObjList[0].QC_INSP_SID).ChangeTo <QCInspectionInfoEx>();
}
//檢查機台資料及狀態
CheckEquipCurrentState(QCInspectionData.EquipmentName);
#endregion
#region 查詢相同的BatchID的檢驗主檔清單
_QCInspectionDataList = QCInspectionInfoEx.GetDataListByBatchID(QCInspectionData.BatchID);
if (_QCInspectionDataList.Count == 0)
{
//檢驗單號:{0} 查無相同的BatchID
throw new Exception(RuleMessage.Error.C10110(QCInspectionData.InspectionNo));
}
#endregion
//設置機台名稱
ttbEquip.Text = QCInspectionData.EquipmentName;
//取得不重複的料號清單
var deviceList = _QCInspectionDataList.FindAll(p => p.Status == CustomizeFunction.QCStatus.PPK.ToCimesString()).Select(p => p.DeviceName).Distinct().ToList();
//var deviceList = _QCInspectionDataList.Select(p => p.DeviceName).Distinct().ToList();
#region 設置料號資料(DropDownList)
//清除資料
ddlDevice.Items.Clear();
//加入清單
foreach (var deviceName in deviceList)
{
ddlDevice.Items.Add(new ListItem(deviceName, deviceName));
}
if (ddlDevice.Items.Count != 1)
{
ddlDevice.Items.Insert(0, "");
}
else
{
ddlDevice.SelectedIndex = 0;
ddlDevice_SelectedIndexChanged(null, EventArgs.Empty);
}
#endregion
}
catch (Exception ex)
{
ClearField();
AjaxFocus(ttbEquipOrCompLot);
HandleError(ex);
}
}