public void SingleConsumer()
{
int oneConsumed = 0;
using (IFiber one = PoolFiber.StartNew())
using (var reset = new AutoResetEvent(false))
{
var channel = new QueueChannel <int>();
void OnMsg(int obj)
{
oneConsumed++;
if (oneConsumed == 20)
{
reset.Set();
}
}
channel.Subscribe(one, OnMsg);
for (int i = 0; i < 20; i++)
{
channel.Publish(i);
}
Assert.IsTrue(reset.WaitOne(10000, false));
}
}
public AsyncReqReplyServiceSpecs()
{
Reply = string.Empty;
Replied = new ManualResetEvent(false);
Console.WriteLine("Start client fiber");
Func <byte[], string> unmarshaller = x => Encoding.Unicode.GetString(x);
Func <string, byte[]> marshaller = x => Encoding.Unicode.GetBytes(x);
ServerFiber = PoolFiber.StartNew();
ServerContext = NetMQContext.Create();
Service = new AsyncRequestHandlerSocket <string, string>(ServerContext,
"tcp://localhost:9997",
unmarshaller,
marshaller);
Service.SetRequestHandler(ServerFiber, request => request.Reply(request.Request.ToUpper()));
Console.WriteLine("Start service");
ClientFiber = StubFiber.StartNew();
ClientContext = NetMQContext.Create();
Client = new AsyncRequestSocket <string, string>(ClientContext,
"tcp://localhost:9997",
marshaller,
unmarshaller);
Console.WriteLine("Start client");
}
public void SingleConsumerWithException()
{
var failed = new List <Exception>();
var exec = new ExceptionHandlingExecutor(failed.Add);
using (IFiber one = PoolFiber.StartNew(exec))
using (var reset = new AutoResetEvent(false))
{
var channel = new QueueChannel <int>();
void OnMsg(int num)
{
if (num == 0)
{
throw new Exception();
}
reset.Set();
}
channel.Subscribe(one, OnMsg);
channel.Publish(0);
channel.Publish(1);
Assert.IsTrue(reset.WaitOne(10000, false));
Assert.AreEqual(1, failed.Count);
}
}
public void TestTwoFibers()
{
FiberTester.TestPubSubWExtraFiber(ThreadFiber.StartNew(), ThreadFiber.StartNew());
FiberTester.TestPubSubWExtraFiber(PoolFiber.StartNew(), ThreadFiber.StartNew());
FiberTester.TestPubSubWExtraFiber(PoolFiber.StartNew(), PoolFiber.StartNew());
FiberTester.TestPubSubWExtraFiber(PoolFiber.StartNew(), StubFiber.StartNew());
}
public void Setup()
{
_pool1 = PoolFiber.StartNew();
_pool2 = new PoolFiber2();
_pool2.Start();
_spinPool = new SpinLockPoolFiber();
_spinPool.Start();
}
public void TestBatching()
{
FiberTester.TestBatching(ThreadFiber.StartNew());
FiberTester.TestBatching(PoolFiber.StartNew());
FiberTester.TestBatching(StubFiber.StartNew());
FiberTester.TestBatchingWithKey(ThreadFiber.StartNew());
FiberTester.TestBatchingWithKey(PoolFiber.StartNew());
FiberTester.TestBatchingWithKey(StubFiber.StartNew());
}
public PushPullSocketPortSpecs()
{
Context1 = NetMQContext.Create();
Context2 = NetMQContext.Create();
RcvdSignal = new ManualResetEvent(false);
ClientFiber = PoolFiber.StartNew();
Pull = new PullSocket <string>(Context1, "tcp://localhost:6002", x => Encoding.Unicode.GetString(x), Channel);
Push = new SendSocket <string>(Context2,
"tcp://localhost:6002",
s => Encoding.Unicode.GetBytes(s),
ZmqSocketType.Push,
false);
}
public void TestName()
{
IRequestChannel <int, int> channel = new RequestChannel <int, int>();
IFiber fiber1 = PoolFiber.StartNew();
channel.SetRequestHandler(fiber1, request => request.Reply(request.Request + 1));
using (var perfTimer = new PerfTimer(1000000))
{
for (int i = 0; i < 1000000; i++)
{
channel.SendRequest(0);
}
}
}
public PubSubSpecs()
{
ClientFiber = PoolFiber.StartNew();
Context1 = NetMQContext.Create();
Send = new SendSocket <string>(Context1,
"tcp://localhost:6001",
s => Encoding.Unicode.GetBytes(s));
Context2 = NetMQContext.Create();
RcvdSignal = new ManualResetEvent(false);
Subscriber = new SubscribeSocket <string>(Context2,
"tcp://localhost:6001",
x => Encoding.Unicode.GetString(x),
Channel);
Subscriber.SubscribeAll();
}
private static void Main()
{
IChannel <string> toProcess = new Channel <string>();
IChannel <string> completed = new Channel <string>();
//first fiber will place something on channel for 2nd fiber to process
using (IFiber fiber1 = PoolFiber.StartNew())
//2nd fiber just writes to the completed channel
using (IDisposable processor = new ChannelAgent <string>(toProcess, s => completed.Publish("Received " + s)))
//A logger that watches the completed channel. Could be optional
using (IDisposable logger = new ChannelAgent <string>(completed, Console.WriteLine))
{
int count = 0;
//Start sending a message after a second, every 2 seconds...
fiber1.Schedule(() => toProcess.Publish("Test" + count++), TimeSpan.FromSeconds(1), TimeSpan.FromSeconds(2));
Console.ReadKey();
}
}
public void MultiConsumerPool()
{
var queues = new List <IFiber>();
IChannel <string> channel = new QueueChannel <string>();
//Init executing Fibers
for (int i = 0; i < 5; i++)
{
Action <string> onReceive = (message) =>
{
var firstChar = message[0];
//Console.WriteLine("[{0}] {1}", Thread.CurrentThread.ManagedThreadId, message);
};
IFiber threadFiber = PoolFiber.StartNew();//new ThreadFiber(new Executor(),new TimerScheduler(),new YieldingQueue() , i.ToString());//new DisruptorQueue(1024*1024)
queues.Add(threadFiber);
channel.Subscribe(threadFiber, onReceive);
}
Stopwatch sw = new Stopwatch();
sw.Start();
//Push messages
for (int i = 0; i < 1000000; i++)
{
string msg = "[" + i + "] Push";
channel.Publish(msg);
}
sw.Stop();
Console.WriteLine("End : " + sw.ElapsedMilliseconds);
//#Results:
//1 ThreadFiber ~= 1sec
//2 ThreadFiber ~=> 3sec
//3 ThreadFiber ~=> 5sec
//4 ThreadFiber ~=> 8sec
//5 ThreadFiber ~=> 10sec
}
public void Snapshot()
{
using (IFiber fiber = PoolFiber.StartNew())
using (IFiber fiber2 = PoolFiber.StartNew())
{
var list = new List <string> {
"Prime"
};
var channel = new SnapshotChannel <string, string[]>();
channel.ReplyToPrimingRequest(fiber2, list.ToArray);
var primeResult = new List <string>();
Action <string> update = primeResult.Add;
Action <string[]> snap = primeResult.AddRange;
channel.Subscribe(fiber, update, snap);
Thread.Sleep(100);
channel.Publish("hello");
channel.Publish("hello2");
Thread.Sleep(100);
Assert.AreEqual("Prime", primeResult[0]);
Assert.AreEqual("hello2", primeResult[primeResult.Count - 1]);
}
}
public void Multiple()
{
var queues = new List <IFiber>();
int receiveCount = 0;
using (var reset = new AutoResetEvent(false))
{
var channel = new QueueChannel <int>();
const int MessageCount = 100;
var updateLock = new object();
for (int i = 0; i < 5; i++)
{
void OnReceive(int obj)
{
Thread.Sleep(15);
lock (updateLock)
{
receiveCount++;
if (receiveCount == MessageCount)
{
reset.Set();
}
}
}
IFiber fiber = PoolFiber.StartNew();
queues.Add(fiber);
channel.Subscribe(fiber, OnReceive);
}
for (int i = 0; i < MessageCount; i++)
{
channel.Publish(i);
}
Assert.IsTrue(reset.WaitOne(10000, false));
queues.ForEach(q => q.Dispose());
}
}
public void MultiConsumerPool()
{
var queues = new List <IFiber>();
IChannel <string> channel = new QueueChannel <string>();
//Init executing Fibers
for (int i = 0; i < 10; i++)
{
void OnReceive(string message)
{
var firstChar = message[0];
}
IFiber fiber = PoolFiber.StartNew();
queues.Add(fiber);
channel.Subscribe(fiber, OnReceive);
}
Stopwatch sw = new Stopwatch();
sw.Start();
//Push messages
for (int i = 0; i < 1000000; i++)
{
string msg = "[" + i + "] Push";
channel.Publish(msg);
}
sw.Stop();
Console.WriteLine("End : " + sw.ElapsedMilliseconds);
//#Results:
//1 ThreadFiber ~= 1sec
//2 ThreadFiber ~=> 3sec
//3 ThreadFiber ~=> 5sec
//4 ThreadFiber ~=> 8sec
//5 ThreadFiber ~=> 10sec
}
public void InOrderExecution()
{
FiberTester.InOrderExecution(ThreadFiber.StartNew());
FiberTester.InOrderExecution(PoolFiber.StartNew());
FiberTester.InOrderExecution(StubFiber.StartNew());
}
public void Setup()
{
_fiber = PoolFiber.StartNew();
}
public void TestReqReply()
{
FiberTester.TestReqReply1(ThreadFiber.StartNew());
FiberTester.TestReqReply1(PoolFiber.StartNew());
FiberTester.TestReqReply1(StubFiber.StartNew());
}
public void TestPubSubWithFilter()
{
FiberTester.TestPubSubWithFilter(ThreadFiber.StartNew());
FiberTester.TestPubSubWithFilter(PoolFiber.StartNew());
FiberTester.TestPubSubWithFilter(StubFiber.StartNew());
}
public void TestPubSubSimple()
{
FiberTester.TestPubSubSimple(ThreadFiber.StartNew());
FiberTester.TestPubSubSimple(PoolFiber.StartNew());
FiberTester.TestPubSubSimple(StubFiber.StartNew());
}
public void Setup()
{
_fiber = PoolFiber.StartNew();
_channel.Subscribe(_fiber, o => { });
}
public void TestName()
{
IRequestChannel <int, int> channel = new RequestChannel <int, int>();
IFiber fiber1 = PoolFiber.StartNew();
}
