private void TryToAssignPhysicalRoleFromString(Layer l, string s)
{
PhysicalRole roleToAssign = ctx.PhysicalRoles.Where(x => x.ShortName == "UN").First();//unassigned role
PhysicalRole roleFoundInDB = null;
try
{
roleFoundInDB = ctx.PhysicalRoles.Where(x => x.ShortName == s | x.LongName == s).First();
}
catch (Exception e)
{
Debug.WriteLine(e.ToString());
}
if (roleFoundInDB != null)
{
roleToAssign = roleFoundInDB;
Debug.WriteLine("Assigned role: " + roleToAssign.ShortName);
}
l.PhysicalRole = roleToAssign;
}
public PhysicalRoleVM()
{
ThePhysicalRole = new PhysicalRole();
}
public static void GenerateDeviceFabricationSpecification(DeviceBatch devBatch)
{
try
{
using (var p = new ExcelPackage())
{
string batchName = string.Concat(devBatch.FabDate.ToString("MMddyy"), " ", devBatch.Name);
//make a new workbook
var ws = p.Workbook.Worksheets.Add(batchName);
//find the maximum number of layers of a particular physical role in each device
List <PhysicalRole> rolesList = new List <PhysicalRole>();
HashSet <string> testConditions = new HashSet <string>();
foreach (Device d in devBatch.Devices)
{
foreach (DeviceLJVScanSummary ss in d.DeviceLJVScanSummaries)
{
testConditions.Add(ss.TestCondition);
}
}
List <string> testConditionsList = testConditions.ToList();
int testConditionCounter = 0;
foreach (string condition in testConditions)
{
Debug.WriteLine("Found testCondition: " + condition);
testConditionCounter++;
}
testConditionsList.Sort();
foreach (Device d in devBatch.Devices)
{
PhysicalRole previousRole = new PhysicalRole();
int duplicatesCounter = 0;
foreach (Layer l in d.Layers)
{
//if the physical role is not in the list, add it
if (!rolesList.Contains(l.PhysicalRole))
{
//if it's at the end of the present role list, add it
if (l.PositionIndex == rolesList.Count())
{
rolesList.Add(l.PhysicalRole);
}
else //otherwise, find the index of previousRole in rolesList and insert l.PhysicalRole
{
var previousRoleIndexInList = rolesList.IndexOf(previousRole);
rolesList.Insert(previousRoleIndexInList + 1, l.PhysicalRole);
}
/*
* else //else, insert it after the other layer with the same index
* rolesList.Insert(l.PositionIndex + duplicatesCounter, l.PhysicalRole);
*/
}
//if it's the same as the previous layer, add a duplicate (note that this causes problems if more than 2 layers share a physical role (unlikely scenario that I'm too lazy to figure out how to avoid))
if (l.PhysicalRole == previousRole)
{
int count = rolesList.Where(x => x.Equals(l.PhysicalRole)).Count();
if (count == 1)//don't keep adding the same layer for multiple bilayer devices
{
int index = rolesList.IndexOf(previousRole);
rolesList.Insert(index, l.PhysicalRole);
duplicatesCounter++;
}
}
previousRole = l.PhysicalRole;
}
}
//add labels to the 2nd row of the spreadsheet (leaving space in first row for expansion)
ws.Cells[2, 1].Value = "Device #";
for (int i = 0; i < rolesList.Count; i++)
{
ws.Cells[2, i + 2].Value = rolesList[i].LongName;
}
//insert values from each layer into relevant cells
foreach (Device d in devBatch.Devices)
{
ws.Cells[d.BatchIndex + 2, 1].Value = d.BatchIndex;
int rolesListCounter = 0;
foreach (Layer l in d.Layers)
{
string cellString = "something weird happened";
//this is a lazy solution that needs to be fixed at some point since Patterned TCOs are not necessarilly produced via sputtering processes
if (l.DepositionMethod.Name == "TCO Substrate")
{
cellString =
string.Concat(
l.Material.Supplier,
" ",
l.Material.Name,
" ",
l.SheetResistance,
" Ω/□"
);
}
else if (l.DepositionMethod.Name == "Spincoating")
{
cellString =
string.Concat(
l.Solution.Material.Name,
" (",
l.Solution.Solvent,
") ",
l.Solution.Concentration,
"mg/mL, ",
l.RPM,
"RPM, ",
l.AnnealTemp,
"C ",
l.AnnealDuration,
"m ",
l.Comment
);
}
else if (l.DepositionMethod.Name == "Thermal Evaporation")
{
cellString =
string.Concat(
l.Material.Name,
" ",
l.Thickness,
"nm"
);
}
else if (l.DepositionMethod.Name == "Manual Pipetting")
{
cellString =
string.Concat(
l.Material.Name,
" ",
l.CureCondition,
" ",
l.CureTime,
"m"
);
}
Debug.WriteLine("Physical role: " + l.PhysicalRole.LongName + " at index: " + rolesListCounter);
if (rolesListCounter < rolesList.Count() && l.PhysicalRole == rolesList[rolesListCounter])
{
ws.Cells[d.BatchIndex + 2, rolesListCounter + 2].Value = cellString;
rolesListCounter++;
}
else
{
while (rolesListCounter < rolesList.Count() && l.PhysicalRole != rolesList[rolesListCounter])
{
rolesListCounter++;
if (rolesListCounter < rolesList.Count && l.PhysicalRole == rolesList[rolesListCounter])
{
ws.Cells[d.BatchIndex + 2, rolesListCounter + 2].Value = cellString;
}
}
}
}
ws.Cells[d.BatchIndex + 2, rolesList.Count + 2].Value = d.Label;
ws.Cells[d.BatchIndex + 2, rolesList.Count + 3].Value = d.Comment;
//data reporting section
for (int i = 0; i < testConditions.Count(); i++)
{
foreach (DeviceLJVScanSummary ss in d.DeviceLJVScanSummaries)
{
if (ss.TestCondition == testConditionsList[i])
{
Debug.WriteLine("Adding data to cell for device " + d.BatchIndex + " with testCondition " + ss.TestCondition);
decimal minEQE = ss.LJVScans.Where(x => x.MaxEQE == ss.LJVScans.Min(y => y.MaxEQE)).First().MaxEQE;
decimal maxEQE = ss.MaxEQE;
decimal minLuminanceAtPeakEQE = ss.LJVScans.Where(x => x.LuminanceAtMaxEQE == ss.LJVScans.Min(y => y.LuminanceAtMaxEQE)).First().LuminanceAtMaxEQE ?? default(int);
decimal maxLuminanceAtPeakEQE = ss.LJVScans.Where(x => x.LuminanceAtMaxEQE == ss.LJVScans.Max(y => y.LuminanceAtMaxEQE)).First().LuminanceAtMaxEQE ?? default(int);
decimal minAt1kNitsEQE = ss.LJVScans.Where(x => x.At1kNitsEQE == ss.LJVScans.Min(y => y.At1kNitsEQE)).First().At1kNitsEQE;
decimal maxAt1kNitsEQE = ss.Max1kNitsEQE;
string cellString = string.Concat(
minEQE,
"-",
maxEQE,
"% ",
minLuminanceAtPeakEQE,
"-",
maxLuminanceAtPeakEQE,
"nits (1K, ",
minAt1kNitsEQE,
"-",
maxAt1kNitsEQE,
"%)"
);
ws.Cells[d.BatchIndex + 2, rolesList.Count + i + 4].Value = cellString; //+4 because i starts at 0 and d.comment is offset by 3 columns from rolesList.Count
}
}
}
}
ws.Cells[2, rolesList.Count + 2].Value = "Device Label";
ws.Cells[2, rolesList.Count + 3].Value = "Comment";
//label test conditions
for (int i = 1; i <= testConditionsList.Count(); i++)
{
ws.Cells[2, rolesList.Count + i + 3].Value = testConditionsList[i - 1];
}
//spreadsheet formatting section
ws.DefaultRowHeight = 45;
ws.DefaultColWidth = 20;
ws.Row(1).Height = 15;
ws.Row(2).Height = 30;
ws.Column(1).Width = 7;
ws.Column(2).Width = 7;
ws.Column(rolesList.Count).Width = 9;
ws.Column(rolesList.Count).Width = 13;
ws.Cells["A1:Z33"].Style.WrapText = true;
ws.Cells["A1:Z33"].Style.HorizontalAlignment = OfficeOpenXml.Style.ExcelHorizontalAlignment.Center;
ws.View.FreezePanes(1, 33);
Process.Start("net.exe", @"use Z: \\169.254.190.155\NPI Shared Data\"); //probably unnecessary but was having an error and this doesn't break anything
//string saveString = devBatch.FilePath.Replace(@"Z:\", @"\\169.254.190.155\NPI Shared Data\");
string saveString = devBatch.FilePath;
saveString = string.Concat(saveString, @"\", devBatch.Name, ".xlsx");
p.SaveAs(new FileInfo(saveString));
}
}
catch (Exception e)
{
Debug.WriteLine(e.ToString());
//MessageBox.Show(e.ToString());
}
}
