// Return the mask bit for "getMaskPattern" at "x" and "y". See 8.8 of JISX0510:2004 for mask // pattern conditions. public static bool getDataMaskBit(int maskPattern, int x, int y) { if (!MicroQRCode.isValidMaskPattern(maskPattern)) { throw new System.ArgumentException("Invalid mask pattern"); } int intermediate, temp; switch (maskPattern) { //ISO/IEC 18004:2006(E) 6.8.1 Data mask patterns / Table 10 ¡ª Data mask pattern generation conditions case 0: intermediate = y & 0x1; break; case 1: intermediate = ((SupportClass.URShift(y, 1)) + (x / 3)) & 0x1; break; case 2: temp = y * x; intermediate = (((temp & 0x1) + (temp % 3)) & 0x1); break; case 3: temp = y * x; intermediate = (((temp % 3) + ((y + x) & 0x1)) & 0x1); break; default: throw new System.ArgumentException("Invalid mask pattern: " + maskPattern); } return(intermediate == 0); }
public void test() { var microQrCode = new MicroQRCode(); // First, test simple setters and getters. // We use numbers of version 7-H. microQrCode.Mode = Mode.ALPHANUMERIC; microQrCode.ECLevel = ErrorCorrectionLevel.L; microQrCode.Version = 15; Assert.AreEqual(Mode.ALPHANUMERIC, microQrCode.Mode); Assert.AreEqual(ErrorCorrectionLevel.L, microQrCode.ECLevel); Assert.AreEqual(15, microQrCode.Version); }
/// <summary> /// /// </summary> /// <param name="contents"></param> /// <param name="format"></param> /// <param name="width"></param> /// <param name="height"></param> /// <param name="hints"></param> /// <returns></returns> public BitMatrix encode(System.String contents, BarcodeFormat format, int width, int height, IDictionary <EncodeHintType, object> hints) { //contents = "12345"; //width = 17; //height = 17; //hints = new Dictionary<EncodeHintType, object>(); //hints.Add(EncodeHintType.ERROR_CORRECTION, ErrorCorrectionLevel.L); //I should probably throw an exception here. if (!hints.ContainsKey(EncodeHintType.MICROQRCODE_VERSION)) { hints.Add(EncodeHintType.MICROQRCODE_VERSION, 4); } if (contents == null || contents.Length == 0) { throw new System.ArgumentException("Found empty contents"); } if (format != BarcodeFormat.MICRO_QR_CODE) { throw new System.ArgumentException("Can only encode MICRO_QR_CODE, but got " + format); } if (width < 0 || height < 0) { throw new System.ArgumentException("Requested dimensions are too small: " + width + 'x' + height); } //hints.Add(EncodeHintType.CHARACTER_SET, "UTF-8"); var errorCorrectionLevel = ErrorCorrectionLevel.L; int cVersionNum = -1; if (hints != null) { if (hints.ContainsKey(EncodeHintType.ERROR_CORRECTION)) { var requestedECLevel = hints[EncodeHintType.ERROR_CORRECTION]; if (requestedECLevel != null) { errorCorrectionLevel = requestedECLevel as ErrorCorrectionLevel; if (errorCorrectionLevel == null) { switch (requestedECLevel.ToString().ToUpper()) { case "L": errorCorrectionLevel = ErrorCorrectionLevel.L; break; case "M": errorCorrectionLevel = ErrorCorrectionLevel.M; break; case "Q": errorCorrectionLevel = ErrorCorrectionLevel.Q; break; default: errorCorrectionLevel = ErrorCorrectionLevel.L; break; } } } } if (hints.ContainsKey(EncodeHintType.MICROQRCODE_VERSION)) { int versionNum = (int)hints[EncodeHintType.MICROQRCODE_VERSION]; if (versionNum >= 1 && versionNum <= 4) { cVersionNum = versionNum; } } } MicroQRCode code = new MicroQRCode(); //Step 1 Encode the Data. Encoder.encode(contents, errorCorrectionLevel, hints, code, cVersionNum); //Step 2 Render the ByteMatrix using the original code. ByteMatrix microQrCodeByteMatrix = renderByteMatrix(code, width, height); //Step 3 Convert the Byte Matrix to a QrCode.ByteMatrix (swapping 1 for 0 and 0 for 1) ZXing.QrCode.Internal.ByteMatrix qrCodeByteMatrix = new QrCode.Internal.ByteMatrix(width, height); for (var y = 0; y < height; y++) { for (var x = 0; x < width; x++) { // Get the byte value and perform byye swap (swapping 1 for 0 and 0 for 1) byte value = (byte)microQrCodeByteMatrix.get_Renamed(x, y); if (value == 0) { qrCodeByteMatrix.set(x, y, 1); } else { qrCodeByteMatrix.set(x, y, 0); } } } //Step 4 render the result and return a BitMatrix BitMatrix bitMatrix2 = renderResult(qrCodeByteMatrix, code, width, height, QUIET_ZONE_SIZE); return(bitMatrix2); }
// Note that the input matrix uses 0 == white, 1 == black, while the output matrix uses // 0 == black, 255 == white (i.e. an 8 bit greyscale bitmap). private static ByteMatrix renderByteMatrix(MicroQRCode code, int width, int height) { ByteMatrix input = code.Matrix; int inputWidth = input.Width; int inputHeight = input.Height; int qrWidth = inputWidth + (QUIET_ZONE_SIZE << 1); int qrHeight = inputHeight + (QUIET_ZONE_SIZE << 1); int outputWidth = System.Math.Max(width, qrWidth); int outputHeight = System.Math.Max(height, qrHeight); int multiple = System.Math.Min(outputWidth / qrWidth, outputHeight / qrHeight); // Padding includes both the quiet zone and the extra white pixels to accommodate the requested // dimensions. For example, if input is 25x25 the QR will be 33x33 including the quiet zone. // If the requested size is 200x160, the multiple will be 4, for a QR of 132x132. These will // handle all the padding from 100x100 (the actual QR) up to 200x160. int leftPadding = (outputWidth - (inputWidth * multiple)) / 2; int topPadding = (outputHeight - (inputHeight * multiple)) / 2; ByteMatrix output = new ByteMatrix(outputWidth, outputHeight); sbyte[][] outputArray = output.Array; // We could be tricky and use the first row in each set of multiple as the temporary storage, // instead of allocating this separate array. sbyte[] row = new sbyte[outputWidth]; // 1. Write the white lines at the top for (int y = 0; y < topPadding; y++) { setRowColor(outputArray[y], (sbyte)SupportClass.Identity(255)); } // 2. Expand the QR image to the multiple sbyte[][] inputArray = input.Array; for (int y = 0; y < inputHeight; y++) { // a. Write the white pixels at the left of each row for (int x = 0; x < leftPadding; x++) { row[x] = (sbyte)SupportClass.Identity(255); } // b. Write the contents of this row of the barcode int offset = leftPadding; for (int x = 0; x < inputWidth; x++) { // Redivivus.in Java to c# Porting update - Type cased sbyte // 30/01/2010 // sbyte value_Renamed = (inputArray[y][x] == 1)?0:(sbyte) SupportClass.Identity(255); sbyte value_Renamed = (sbyte)((inputArray[y][x] == 1) ? 0 : SupportClass.Identity(255)); for (int z = 0; z < multiple; z++) { row[offset + z] = value_Renamed; } offset += multiple; } // c. Write the white pixels at the right of each row offset = leftPadding + (inputWidth * multiple); for (int x = offset; x < outputWidth; x++) { row[x] = (sbyte)SupportClass.Identity(255); } // d. Write the completed row multiple times offset = topPadding + (y * multiple); for (int z = 0; z < multiple; z++) { Array.Copy(row, 0, outputArray[offset + z], 0, outputWidth); } } // 3. Write the white lines at the bottom int offset2 = topPadding + (inputHeight * multiple); for (int y = offset2; y < outputHeight; y++) { setRowColor(outputArray[y], (sbyte)SupportClass.Identity(255)); } return(output); }
// Note that the input matrix uses 0 == white, 1 == black, while the output matrix uses // 0 == black, 255 == white (i.e. an 8 bit greyscale bitmap). private static BitMatrix renderResult(ZXing.QrCode.Internal.ByteMatrix bitMatrix, MicroQRCode code, int width, int height, int quietZone) { ZXing.QrCode.Internal.ByteMatrix input = bitMatrix; if (input == null) { throw new InvalidOperationException(); } int inputWidth = input.Width; int inputHeight = input.Height; int qrWidth = inputWidth + (quietZone << 1); int qrHeight = inputHeight + (quietZone << 1); int outputWidth = Math.Max(width, qrWidth); int outputHeight = Math.Max(height, qrHeight); int multiple = Math.Min(outputWidth / qrWidth, outputHeight / qrHeight); // Padding includes both the quiet zone and the extra white pixels to accommodate the requested // dimensions. For example, if input is 25x25 the QR will be 33x33 including the quiet zone. // If the requested size is 200x160, the multiple will be 4, for a QR of 132x132. These will // handle all the padding from 100x100 (the actual QR) up to 200x160. int leftPadding = (outputWidth - (inputWidth * multiple)) / 2; int topPadding = (outputHeight - (inputHeight * multiple)) / 2; var output = new BitMatrix(outputWidth, outputHeight); for (int inputY = 0, outputY = topPadding; inputY < inputHeight; inputY++, outputY += multiple) { // Write the contents of this row of the barcode for (int inputX = 0, outputX = leftPadding; inputX < inputWidth; inputX++, outputX += multiple) { if (input[inputX, inputY] == 1) { output.setRegion(outputX, outputY, multiple, multiple); } } } return(output); }