void Initialize()
{
var config = new SpiClockConfiguration(
new Frequency(48000, Frequency.UnitType.Kilohertz),
SpiClockConfiguration.Mode.Mode3);
var spiBus = MeadowApp.Device.CreateSpiBus(
clock: MeadowApp.Device.Pins.SCK,
copi: MeadowApp.Device.Pins.MOSI,
cipo: MeadowApp.Device.Pins.MISO,
config: config);
var display = new St7789
(
device: MeadowApp.Device,
spiBus: spiBus,
chipSelectPin: null,
dcPin: MeadowApp.Device.Pins.D01,
resetPin: MeadowApp.Device.Pins.D00,
width: 240, height: 240,
displayColorMode: ColorType.Format16bppRgb565
);
graphics = new MicroGraphics(display)
{
Stroke = 1,
CurrentFont = new Font12x20(),
Rotation = RotationType._270Degrees
};
graphics.Clear();
graphics.Show();
}
void Initialize()
{
var config = new SpiClockConfiguration(
speed: new Frequency(12000, Frequency.UnitType.Kilohertz),
mode: SpiClockConfiguration.Mode.Mode0);
var spiBus = Device.CreateSpiBus(
clock: Device.Pins.SCK,
copi: Device.Pins.MOSI,
cipo: Device.Pins.MISO,
config: config);
display = new Ssd1309
(
device: Device,
spiBus: spiBus,
chipSelectPin: Device.Pins.D02,
dcPin: Device.Pins.D01,
resetPin: Device.Pins.D00
);
graphics = new MicroGraphics(display);
graphics.CurrentFont = new Font12x16();
buttonLeft = new PushButton(Device, Device.Pins.D11, ResistorMode.Disabled);
buttonRight = new PushButton(Device, Device.Pins.D10, ResistorMode.Disabled);
buttonUp = new PushButton(Device, Device.Pins.D09, ResistorMode.Disabled);
buttonDown = new PushButton(Device, Device.Pins.D12, ResistorMode.Disabled);
speaker = new PiezoSpeaker(Device, Device.Pins.D13);
}
void Initialize()
{
var onboardLed = new RgbPwmLed(
device: Device,
redPwmPin: Device.Pins.OnboardLedRed,
greenPwmPin: Device.Pins.OnboardLedGreen,
bluePwmPin: Device.Pins.OnboardLedBlue);
onboardLed.SetColor(Color.Red);
var i2CBus = Device.CreateI2cBus();
radio = new Tea5767(i2CBus);
var display = new Ssd1306(i2CBus, 60, Ssd1306.DisplayType.OLED128x32);
graphics = new MicroGraphics(display);
graphics.Rotation = RotationType._180Degrees;
btnNext = new PushButton(Device, Device.Pins.D03);
btnNext.Clicked += BtnNextClicked;
btnPrevious = new PushButton(Device, Device.Pins.D04);
btnPrevious.Clicked += BtnPreviousClicked;
onboardLed.SetColor(Color.Green);
}
void Initialize()
{
var onboardLed = new RgbPwmLed(
device: Device,
redPwmPin: Device.Pins.OnboardLedRed,
greenPwmPin: Device.Pins.OnboardLedGreen,
bluePwmPin: Device.Pins.OnboardLedBlue);
onboardLed.SetColor(Color.Red);
var config = new SpiClockConfiguration(
speed: new Frequency(48000, Frequency.UnitType.Kilohertz),
mode: SpiClockConfiguration.Mode.Mode3);
var spiBus = Device.CreateSpiBus(
clock: Device.Pins.SCK,
copi: Device.Pins.MOSI,
cipo: Device.Pins.MISO,
config: config);
var display = new St7789(
device: Device,
spiBus: spiBus,
chipSelectPin: Device.Pins.D02,
dcPin: Device.Pins.D01,
resetPin: Device.Pins.D00,
width: 240, height: 240);
graphics = new MicroGraphics(display);
graphics.Rotation = RotationType._180Degrees;
graphics.CurrentFont = new Font12x16();
sensor = new Mpr121(Device.CreateI2cBus(I2cBusSpeed.Standard), 90, 100);
sensor.ChannelStatusesChanged += SensorChannelStatusesChanged;
onboardLed.SetColor(Color.Green);
}
void Initialize()
{
var onboardLed = new RgbPwmLed(
device: Device,
redPwmPin: Device.Pins.OnboardLedRed,
greenPwmPin: Device.Pins.OnboardLedGreen,
bluePwmPin: Device.Pins.OnboardLedBlue);
onboardLed.SetColor(Color.Red);
var i2CBus = Device.CreateI2cBus();
var display = new Ssd1306(i2CBus, 60, Ssd1306.DisplayType.OLED128x32);
graphics = new MicroGraphics(display);
graphics.Rotation = RotationType._180Degrees;
rowPorts[0] = Device.CreateDigitalInputPort(Device.Pins.D15, InterruptMode.EdgeRising, ResistorMode.InternalPullDown, 0, 50);
rowPorts[1] = Device.CreateDigitalInputPort(Device.Pins.D14, InterruptMode.EdgeRising, ResistorMode.InternalPullDown, 0, 50);
rowPorts[2] = Device.CreateDigitalInputPort(Device.Pins.D13, InterruptMode.EdgeRising, ResistorMode.InternalPullDown, 0, 50);
rowPorts[3] = Device.CreateDigitalInputPort(Device.Pins.D12, InterruptMode.EdgeRising, ResistorMode.InternalPullDown, 0, 50);
columnPorts[0] = Device.CreateDigitalOutputPort(Device.Pins.D01);
columnPorts[1] = Device.CreateDigitalOutputPort(Device.Pins.D02);
columnPorts[2] = Device.CreateDigitalOutputPort(Device.Pins.D03);
columnPorts[3] = Device.CreateDigitalOutputPort(Device.Pins.D04);
currentColumn = 0;
onboardLed.SetColor(Color.Green);
}
void Initialize()
{
Console.WriteLine("Initialize hardware...");
portLeft = Device.CreateDigitalInputPort(Device.Pins.D13);
portRight = Device.CreateDigitalInputPort(Device.Pins.D11);
portDown = Device.CreateDigitalInputPort(Device.Pins.D12);
portReset = Device.CreateDigitalInputPort(Device.Pins.D07);
speaker = new PiezoSpeaker(Device.CreatePwmPort(Device.Pins.D05));
var config = new SpiClockConfiguration(
speed: new Frequency(12000, Frequency.UnitType.Kilohertz),
mode: SpiClockConfiguration.Mode.Mode0);
var spiBus = Device.CreateSpiBus(
clock: Device.Pins.SCK,
copi: Device.Pins.MOSI,
cipo: Device.Pins.MISO,
config: config);
var display = new Ssd1309
(
device: Device,
spiBus: spiBus,
chipSelectPin: Device.Pins.D02,
dcPin: Device.Pins.D01,
resetPin: Device.Pins.D00
);
graphics = new MicroGraphics(display);
graphics.CurrentFont = new Font4x8();
}
void Initialize()
{
portLeft = Device.CreateDigitalInputPort(Device.Pins.D12);
portUp = Device.CreateDigitalInputPort(Device.Pins.D13);
portRight = Device.CreateDigitalInputPort(Device.Pins.D07);
portDown = Device.CreateDigitalInputPort(Device.Pins.D11);
var config = new SpiClockConfiguration(
speed: new Frequency(48000, Frequency.UnitType.Kilohertz),
mode: SpiClockConfiguration.Mode.Mode3);
var spiBus = Device.CreateSpiBus(
clock: Device.Pins.SCK,
copi: Device.Pins.MOSI,
cipo: Device.Pins.MISO,
config: config);
var display = new Ssd1309
(
device: Device,
spiBus: spiBus,
chipSelectPin: Device.Pins.D02,
dcPin: Device.Pins.D01,
resetPin: Device.Pins.D00
);
graphics = new MicroGraphics(display);
graphics.CurrentFont = new Font4x8();
graphics.Rotation = RotationType._270Degrees;
}
void Initialize()
{
Console.WriteLine("Initialize hardware...");
portLeft = Device.CreateDigitalInputPort(Device.Pins.D02);
portRight = Device.CreateDigitalInputPort(Device.Pins.D03);
portDown = Device.CreateDigitalInputPort(Device.Pins.D04);
portReset = Device.CreateDigitalInputPort(Device.Pins.D05);
speaker = new PiezoSpeaker(Device.CreatePwmPort(Device.Pins.D06));
var config = new SpiClockConfiguration(
speed: new Frequency(6000, Frequency.UnitType.Kilohertz),
mode: SpiClockConfiguration.Mode.Mode3);
var spiBus = Device.CreateSpiBus(
clock: Device.Pins.SCK,
copi: Device.Pins.MOSI,
cipo: Device.Pins.MISO,
config: config);
var display = new St7789(
device: Device,
spiBus: spiBus,
chipSelectPin: Device.Pins.D10,
dcPin: Device.Pins.D01,
resetPin: Device.Pins.D00,
width: 240, height: 240);
Console.WriteLine("Create graphics library");
graphics = new MicroGraphics(display);
graphics.CurrentFont = new Font12x16();
}
void Initialize()
{
var onboardLed = new RgbPwmLed(
device: Device,
redPwmPin: Device.Pins.OnboardLedRed,
greenPwmPin: Device.Pins.OnboardLedGreen,
bluePwmPin: Device.Pins.OnboardLedBlue);
onboardLed.SetColor(Color.Red);
var config = new SpiClockConfiguration(
speed: new Frequency(48000, Frequency.UnitType.Kilohertz),
mode: SpiClockConfiguration.Mode.Mode3);
var spiBus = Device.CreateSpiBus(
clock: Device.Pins.SCK,
copi: Device.Pins.MOSI,
cipo: Device.Pins.MISO,
config: config);
var st7789 = new St7789
(
device: Device,
spiBus: spiBus,
chipSelectPin: null,
dcPin: Device.Pins.D01,
resetPin: Device.Pins.D00,
width: 240, height: 240
);
graphics = new MicroGraphics(st7789)
{
CurrentFont = new Font12x20(),
};
graphics.Clear();
var menuData = LoadFromJson("menu.json");
//var menuData = LoadFromCode();
menu = new Menu(graphics, menuData, false);
next = new PushButton(Device, Device.Pins.D03, ResistorMode.InternalPullUp);
next.Clicked += (s, e) => { menu.Next(); };
select = new PushButton(Device, Device.Pins.D04, ResistorMode.InternalPullUp);
select.Clicked += (s, e) => { menu.Select(); };
previous = new PushButton(Device, Device.Pins.D02, ResistorMode.InternalPullUp);
previous.Clicked += (s, e) => { menu.Previous(); };
onboardLed.SetColor(Color.Green);
menu.Enable();
}
void Initialize()
{
var display = new Max7219(
device: Device,
spiBus: Device.CreateSpiBus(Max7219.DefaultSpiBusSpeed),
csPin: Device.Pins.D01,
deviceCount: 4,
maxMode: Max7219.Max7219Type.Display);
graphics = new MicroGraphics(display);
graphics.CurrentFont = new Font4x8();
joystick = new AnalogJoystick(Device, Device.Pins.A01, Device.Pins.A02, null, true);
joystick.StartUpdating(TimeSpan.FromMilliseconds(20));
}
async Task Initialize()
{
var onboardLed = new RgbPwmLed(
device: Device,
redPwmPin: Device.Pins.OnboardLedRed,
greenPwmPin: Device.Pins.OnboardLedGreen,
bluePwmPin: Device.Pins.OnboardLedBlue);
onboardLed.SetColor(Color.Red);
var display = new Max7219(
device: Device,
spiBus: Device.CreateSpiBus(),
csPin: Device.Pins.D01,
deviceCount: 4,
maxMode: Max7219.Max7219Type.Display);
graphics = new MicroGraphics(display);
graphics.CurrentFont = new Font4x8();
graphics.Rotation = RotationType._180Degrees;
graphics.Clear();
graphics.DrawText(0, 1, "WI");
graphics.DrawText(0, 9, "FI");
graphics.DrawText(0, 17, "TI");
graphics.DrawText(0, 25, "ME");
graphics.Show();
pushButton = new PushButton(Device, Device.Pins.D04, ResistorMode.InternalPullUp);
pushButton.Clicked += PushButtonClicked;
analogTemperature = new AnalogTemperature(
device: Device,
analogPin: Device.Pins.A00,
sensorType: AnalogTemperature.KnownSensorType.LM35
);
var connectionResult = await Device.WiFiAdapter.Connect(Secrets.WIFI_NAME, Secrets.WIFI_PASSWORD);
if (connectionResult.ConnectionStatus != ConnectionStatus.Success)
{
throw new Exception($"Cannot connect to network: {connectionResult.ConnectionStatus}");
}
onboardLed.StartPulse(Color.Green);
}
public MeadowApp()
{
var onboardLed = new RgbPwmLed(
device: Device,
redPwmPin: Device.Pins.OnboardLedRed,
greenPwmPin: Device.Pins.OnboardLedGreen,
bluePwmPin: Device.Pins.OnboardLedBlue);
onboardLed.SetColor(Color.Red);
x = y = 120;
var config = new SpiClockConfiguration(
speed: new Frequency(48000, Frequency.UnitType.Kilohertz),
mode: SpiClockConfiguration.Mode.Mode3);
var spiBus = Device.CreateSpiBus(
clock: Device.Pins.SCK,
copi: Device.Pins.MOSI,
cipo: Device.Pins.MISO,
config: config);
var st7789 = new St7789(
device: Device,
spiBus: spiBus,
chipSelectPin: null,
dcPin: Device.Pins.D01,
resetPin: Device.Pins.D00,
width: 240, height: 240);
graphics = new MicroGraphics(st7789);
graphics.Clear(true);
graphics.DrawRectangle(0, 0, 240, 240, Color.White, true);
graphics.DrawPixel(x, y, Color.Red);
graphics.Show();
rotaryX = new RotaryEncoderWithButton(Device,
Device.Pins.A00, Device.Pins.A01, Device.Pins.A02);
rotaryX.Rotated += RotaryXRotated;
rotaryY = new RotaryEncoderWithButton(Device,
Device.Pins.D02, Device.Pins.D03, Device.Pins.D04);
rotaryY.Rotated += RotaryYRotated;
rotaryY.Clicked += RotaryYClicked;
onboardLed.SetColor(Color.Green);
}
public DisplayController(St7789 display)
{
graphics = new MicroGraphics(display);
graphics.CurrentFont = new Font12x20();
graphics.Stroke = 3;
graphics.Clear();
graphics.DrawRectangle(0, 0, 240, 240, Color.White, true);
string plant = "Plant";
string monitor = "Monitor";
graphics.CurrentFont = new Font12x16();
graphics.DrawText((240 - (plant.Length * 24)) / 2, 80, plant, Color.Black, ScaleFactor.X2);
graphics.DrawText((240 - (monitor.Length * 24)) / 2, 130, monitor, Color.Black, ScaleFactor.X2);
graphics.Show();
}
public void Initialize()
{
if (initialized)
{
return;
}
ledDisplay = new Max7219(
MeadowApp.Device,
MeadowApp.Device.CreateSpiBus(),
MeadowApp.Device.Pins.D00,
deviceCount: 4,
maxMode: Max7219.Max7219Type.Display);
ledDisplay.IgnoreOutOfBoundsPixels = true;
canvas = new MicroGraphics(ledDisplay);
canvas.Rotation = RotationType._90Degrees;
canvas.CurrentFont = new Font4x8();
initialized = true;
}
public MeadowApp()
{
var onboardLed = new RgbPwmLed(
device: Device,
redPwmPin: Device.Pins.OnboardLedRed,
greenPwmPin: Device.Pins.OnboardLedGreen,
bluePwmPin: Device.Pins.OnboardLedBlue);
onboardLed.SetColor(Color.Red);
var config = new SpiClockConfiguration(
speed: new Frequency(48000, Frequency.UnitType.Kilohertz),
mode: SpiClockConfiguration.Mode.Mode3);
var spiBus = Device.CreateSpiBus(
clock: Device.Pins.SCK,
copi: Device.Pins.MOSI,
cipo: Device.Pins.MISO,
config: config);
var display = new St7789
(
device: Device,
spiBus: spiBus,
chipSelectPin: null,
dcPin: Device.Pins.D01,
resetPin: Device.Pins.D00,
width: 240, height: 240
);
graphics = new MicroGraphics(display);
graphics.Rotation = RotationType._270Degrees;
motionSensor = new ParallaxPir(Device, Device.Pins.D08, InterruptMode.EdgeFalling, ResistorMode.Disabled, 5, 0);
motionSensor.OnMotionStart += MotionSensorMotionStart;
motionSensor.OnMotionEnd += MotionSensorMotionEnd;
onboardLed.SetColor(Color.Green);
LoadScreen();
}
void Initialize()
{
var onboardLed = new RgbPwmLed(
device: Device,
redPwmPin: Device.Pins.OnboardLedRed,
greenPwmPin: Device.Pins.OnboardLedGreen,
bluePwmPin: Device.Pins.OnboardLedBlue);
onboardLed.SetColor(Color.Red);
var config = new SpiClockConfiguration(
new Frequency(48000, Frequency.UnitType.Kilohertz),
SpiClockConfiguration.Mode.Mode3);
var spiBus = Device.CreateSpiBus(
Device.Pins.SCK,
Device.Pins.MOSI,
Device.Pins.MISO, config);
var display = new St7789(
device: Device,
spiBus: spiBus,
chipSelectPin: Device.Pins.D02,
dcPin: Device.Pins.D01,
resetPin: Device.Pins.D00,
width: 240, height: 240);
graphics = new MicroGraphics(display);
graphics.CurrentFont = new Font12x20();
graphics.Rotation = RotationType._270Degrees;
var i2cBus = Device.CreateI2cBus(I2cBusSpeed.FastPlus);
sensor = new Vl53l0x(Device, i2cBus);
sensor.StartUpdating(TimeSpan.FromMilliseconds(200));
servo = new Servo(Device.CreatePwmPort(Device.Pins.D05), NamedServoConfigs.SG90);
servo.RotateTo(new Angle(0, AU.Degrees));
onboardLed.SetColor(Color.Green);
}
public MeadowApp()
{
led = new RgbPwmLed(
device: Device,
redPwmPin: Device.Pins.OnboardLedRed,
greenPwmPin: Device.Pins.OnboardLedGreen,
bluePwmPin: Device.Pins.OnboardLedBlue);
led.SetColor(Color.Red);
buttonUp = new PushButton(Device, Device.Pins.D03);
buttonUp.Clicked += ButtonUpClicked;
buttonDown = new PushButton(Device, Device.Pins.D04);
buttonDown.Clicked += ButtonDownClicked;
var config = new SpiClockConfiguration(
speed: new Frequency(48000, Frequency.UnitType.Kilohertz),
mode: SpiClockConfiguration.Mode.Mode3);
var spiBus = Device.CreateSpiBus(
clock: Device.Pins.SCK,
copi: Device.Pins.MOSI,
cipo: Device.Pins.MISO,
config: config);
var display = new Gc9a01
(
device: Device,
spiBus: spiBus,
chipSelectPin: Device.Pins.D02,
dcPin: Device.Pins.D01,
resetPin: Device.Pins.D00
);
graphics = new MicroGraphics(display);
graphics.Rotation = RotationType._90Degrees;
DisplayJPG();
led.SetColor(Color.Green);
}
void Initialize()
{
var onboardLed = new RgbPwmLed(
device: Device,
redPwmPin: Device.Pins.OnboardLedRed,
greenPwmPin: Device.Pins.OnboardLedGreen,
bluePwmPin: Device.Pins.OnboardLedBlue);
onboardLed.SetColor(Color.Red);
analogTemperature = new AnalogTemperature(
device: Device,
analogPin: Device.Pins.A00,
sensorType: AnalogTemperature.KnownSensorType.LM35
);
analogTemperature.TemperatureUpdated += AnalogTemperatureTemperatureUpdated; //+= AnalogTemperatureUpdated;
var config = new SpiClockConfiguration(
speed: new Frequency(48000, Frequency.UnitType.Kilohertz),
mode: SpiClockConfiguration.Mode.Mode3);
var spiBus = Device.CreateSpiBus(
clock: Device.Pins.SCK,
copi: Device.Pins.MOSI,
cipo: Device.Pins.MISO,
config: config);
var st7789 = new St7789(
device: Device,
spiBus: spiBus,
chipSelectPin: Device.Pins.D02,
dcPin: Device.Pins.D01,
resetPin: Device.Pins.D00,
width: 240, height: 240);
graphics = new MicroGraphics(st7789);
graphics.Rotation = RotationType._270Degrees;
onboardLed.SetColor(Color.Green);
}
void Initialize()
{
Console.WriteLine("Initialize hardware...");
onboardLed = new RgbPwmLed(device: Device,
redPwmPin: Device.Pins.OnboardLedRed,
greenPwmPin: Device.Pins.OnboardLedGreen,
bluePwmPin: Device.Pins.OnboardLedBlue);
onboardLed.SetColor(Color.Red);
var config = new SpiClockConfiguration(
speed: new Frequency(48000, Frequency.UnitType.Kilohertz),
mode: SpiClockConfiguration.Mode.Mode3);
var spiBus = Device.CreateSpiBus(
clock: Device.Pins.SCK,
copi: Device.Pins.MOSI,
cipo: Device.Pins.MISO,
config: config);
var display = new St7789(
device: Device,
spiBus: spiBus,
chipSelectPin: Device.Pins.D02,
dcPin: Device.Pins.D01,
resetPin: Device.Pins.D00,
width: 240, height: 240);
graphics = new MicroGraphics(display);
graphics.CurrentFont = new Font12x20();
button = Device.CreateDigitalInputPort(Device.Pins.D12, InterruptMode.EdgeRising, ResistorMode.Disabled);
button.Changed += Button_Changed;
sensor = new Bmp180(Device.CreateI2cBus());
sensor.Updated += SensorUpdated;
sensor.StartUpdating();
onboardLed.SetColor(Color.Green);
}
void Initialize()
{
var onboardLed = new RgbPwmLed(
device: Device,
redPwmPin: Device.Pins.OnboardLedRed,
greenPwmPin: Device.Pins.OnboardLedGreen,
bluePwmPin: Device.Pins.OnboardLedBlue);
onboardLed.SetColor(Color.Red);
var config = new SpiClockConfiguration(
speed: new Frequency(48000, Frequency.UnitType.Kilohertz),
mode: SpiClockConfiguration.Mode.Mode3);
var spiBus = Device.CreateSpiBus(
clock: Device.Pins.SCK,
copi: Device.Pins.MOSI,
cipo: Device.Pins.MISO,
config: config);
var st7789 = new St7789
(
device: Device,
spiBus: spiBus,
chipSelectPin: Device.Pins.D02,
dcPin: Device.Pins.D01,
resetPin: Device.Pins.D00,
width: 240, height: 240
);
displayWidth = Convert.ToInt32(st7789.Width);
displayHeight = Convert.ToInt32(st7789.Height);
graphics = new MicroGraphics(st7789);
graphics.Rotation = RotationType._270Degrees;
onboardLed.SetColor(Color.Green);
}