| public AddTriangle ( int index0, int index1, int index2 ) : void | ||
| index0 | int | |
| index1 | int | |
| index2 | int | |
| Результат | void | |
public static void BuildRectangleMesh(MeshBuilder meshBuilder,
float width,
float height,
float wStart,
float hStart,
float amount) {
float fullW;
float fullH;
if ( width >= height ) {
fullH = height*amount;
fullW = width-(height-fullH);
}
else {
fullW = width*amount;
fullH = height-(width-fullW);
}
meshBuilder.Resize(4, 6);
meshBuilder.ResetIndices();
meshBuilder.AddVertex(new Vector3(fullW, fullH, 0));
meshBuilder.AddVertex(new Vector3(fullW, fullH*hStart, 0));
meshBuilder.AddVertex(new Vector3(fullW*wStart, fullH*hStart, 0));
meshBuilder.AddVertex(new Vector3(fullW*wStart, fullH, 0));
meshBuilder.AddTriangle(0, 1, 2);
meshBuilder.AddTriangle(0, 2, 3);
meshBuilder.AddRemainingUvs(Vector2.zero);
}
/// <summary>
/// Builds a single quad based on a position offset and width and length vectors.
/// </summary>
/// <param name="meshBuilder">The mesh builder currently being added to.</param>
/// <param name="offset">A position offset for the quad.</param>
/// <param name="widthDir">The width vector of the quad.</param>
/// <param name="lengthDir">The length vector of the quad.</param>
public static void BuildQuad(MeshBuilder meshBuilder, Vector3 offset, Vector3 widthDir, Vector3 lengthDir) {
Vector3 normal = Vector3.Cross(lengthDir, widthDir).normalized;
meshBuilder.Vertices.Add(offset);
meshBuilder.UVs.Add(new Vector2(0.0f, 0.0f));
meshBuilder.Normals.Add(normal);
meshBuilder.Vertices.Add(offset + lengthDir);
meshBuilder.UVs.Add(new Vector2(0.0f, 1.0f));
meshBuilder.Normals.Add(normal);
meshBuilder.Vertices.Add(offset + lengthDir + widthDir);
meshBuilder.UVs.Add(new Vector2(1.0f, 1.0f));
meshBuilder.Normals.Add(normal);
meshBuilder.Vertices.Add(offset + widthDir);
meshBuilder.UVs.Add(new Vector2(1.0f, 0.0f));
meshBuilder.Normals.Add(normal);
//we don't know how many verts the meshBuilder is up to, but we only care about the four we just added:
int baseIndex = meshBuilder.Vertices.Count - 4;
meshBuilder.AddTriangle(baseIndex, baseIndex + 1, baseIndex + 2);
meshBuilder.AddTriangle(baseIndex, baseIndex + 2, baseIndex + 3);
}
public static void BuildArcMesh(MeshBuilder meshBuilder,
float innerRadius,
float outerRadius,
float startAngle,
float endAngle,
int steps) {
float angleFull = endAngle - startAngle;
float angleInc = angleFull / steps;
float angle = startAngle;
meshBuilder.Resize((steps+1)*2, steps*6);
meshBuilder.ResetIndices ();
for (int i = 0; i <= steps; ++i) {
float uv = i/(float)steps;
meshBuilder.AddVertex(GetArcPoint(innerRadius, angle));
meshBuilder.AddVertex(GetArcPoint(outerRadius, angle));
meshBuilder.AddUv(new Vector2(uv, 0));
meshBuilder.AddUv(new Vector2(uv, 1));
if ( i > 0 ) {
int vi = meshBuilder.VertexIndex;
meshBuilder.AddTriangle(vi-3, vi-4, vi-2);
meshBuilder.AddTriangle(vi-1, vi-3, vi-2);
}
angle += angleInc;
}
}
void BuildQuad(MeshBuilder meshBuilder, Vector3 offset, Vector3 widthDir, Vector3 lengthDir, int sizeX, int sizeY)
{
Vector3 normal = Vector3.Cross (lengthDir, widthDir).normalized;
float vx, vy;
// Define vertices e triangulos
for (int y = 0; y <= sizeY; y++) {
for (int x = 0; x <= sizeX; x++) {
vx = ((float) x / sizeX);
vy = ((float) y / sizeY);
meshBuilder.Vertices.Add (offset + vx * lengthDir + vy * widthDir);
meshBuilder.UVs.Add (new Vector2(vx, vy));
meshBuilder.Normals.Add (normal);
}
}
int baseIndex = meshBuilder.Vertices.Count - (sizeX+1) * (sizeY+1);
for (int vi = baseIndex, y = 0; y < sizeY; y++, vi++) {
for (int x = 0; x < sizeX; x++, vi++) {
meshBuilder.AddTriangle (vi, vi+1, vi+sizeX+2);
meshBuilder.AddTriangle (vi, vi+sizeX+2, vi+sizeX+1);
}
}
}
void BuildQuad(MeshBuilder meshBuilder, Vector3 offset, Vector3 widthDirection, Vector3 lengthDirection)
{
Vector3 normal = Vector3.Cross(lengthDirection, widthDirection).normalized;
//Set up the vertices and triangles:
meshBuilder.Vertices.Add(offset);
meshBuilder.Uvs.Add(new Vector2(0.0f, 0.0f));
meshBuilder.Normals.Add(normal);
meshBuilder.Vertices.Add(offset + lengthDirection);
meshBuilder.Uvs.Add(new Vector2(0.0f, 1.0f));
meshBuilder.Normals.Add(normal);
meshBuilder.Vertices.Add(offset + lengthDirection + widthDirection);
meshBuilder.Uvs.Add(new Vector2(1.0f, 1.0f));
meshBuilder.Normals.Add(normal);
meshBuilder.Vertices.Add(offset + widthDirection);
meshBuilder.Uvs.Add(new Vector2(1.0f, 0.0f));
meshBuilder.Normals.Add(normal);
int startPoint = meshBuilder.Vertices.Count - 4;
if(first){
meshBuilder.AddTriangle(startPoint, startPoint + 1, startPoint + 2);
meshBuilder.AddTriangle(startPoint, startPoint + 2, startPoint + 3);
//first = false;
}
}
//BuildQuad with vectors
public static Mesh BuildQuad(MeshBuilder meshBuilder, Vector3 offset, Vector3 widthDir, Vector3 lengthDir)
{
Vector3 normal = Vector3.Cross(lengthDir, widthDir).normalized;
meshBuilder.Vertices.Add(offset);
meshBuilder.UVs.Add(new Vector2(0.0f, 0.0f));
meshBuilder.Normals.Add(normal);
meshBuilder.Vertices.Add(offset + lengthDir);
meshBuilder.UVs.Add(new Vector2(0.0f, 1.0f));
meshBuilder.Normals.Add(normal);
meshBuilder.Vertices.Add(offset + lengthDir + widthDir);
meshBuilder.UVs.Add(new Vector2(1.0f, 1.0f));
meshBuilder.Normals.Add(normal);
meshBuilder.Vertices.Add(offset + widthDir);
meshBuilder.UVs.Add(new Vector2(1.0f, 0.0f));
meshBuilder.Normals.Add(normal);
int baseIndex = meshBuilder.Vertices.Count - 4;
meshBuilder.AddTriangle(baseIndex, baseIndex + 1, baseIndex + 2);
meshBuilder.AddTriangle(baseIndex, baseIndex + 2, baseIndex + 3);
Mesh _CreatedMesh = meshBuilder.CreateMesh();
_CreatedMesh.RecalculateNormals();
return _CreatedMesh;
}
protected void AddQuadTriangles(MeshBuilder meshBuilder, int index0, int index1, int index2, int index3)
{
if (meshFace == MeshFace.Front || meshFace == MeshFace.Both) {
meshBuilder.AddTriangle(index0, index1, index2);
meshBuilder.AddTriangle(index1, index3, index2);
}
if(meshFace == MeshFace.Back || meshFace == MeshFace.Both){
meshBuilder.AddTriangle(index1, index0, index2);
meshBuilder.AddTriangle(index1, index2, index3);
}
}
protected virtual void AddTrianglesAtIndex(MeshBuilder meshBuilder, int originIndex, int i)
{
if (meshFace == MeshFace.Front || meshFace == MeshFace.Both) {
meshBuilder.AddTriangle(originIndex,
originIndex + i + 1,
originIndex + (i + 1) % curveVerticesNumber + 1);
}
if(meshFace == MeshFace.Back || meshFace == MeshFace.Both){
meshBuilder.AddTriangle(originIndex,
originIndex + (i + 1) % curveVerticesNumber + 1,
originIndex + i + 1);
}
}
MeshBuilder GenerateCurveTriangles(MeshBuilder meshBuilder, bool doubleTriangles = false)
{
int baseIndex = 0;
int sizeX = 2;
int sizeY = meshBuilder.Vertices.Count / 3 - 1;
int vi = baseIndex;
for (int y = 0; y < sizeY; y++, vi++) {
for (int x = 0; x < sizeX; x++, vi++) {
meshBuilder.AddTriangle (vi, vi + sizeX + 1, vi + 1);
meshBuilder.AddTriangle (vi + 1, vi + sizeX + 1, vi + sizeX + 2);
if (y == sizeY - 1) {
meshBuilder.AddTriangle (vi + sizeX + 1, baseIndex + x, vi + sizeX + 2);
meshBuilder.AddTriangle (baseIndex + x + 1, vi + sizeX + 2, baseIndex + x);
}
if (doubleTriangles) {
meshBuilder.AddTriangle (vi + 1, vi + sizeX + 1, vi);
meshBuilder.AddTriangle (vi + sizeX + 2, vi + sizeX + 1, vi + 1);
if (y == sizeY - 1) {
meshBuilder.AddTriangle (vi + sizeX + 2, baseIndex + x, vi + sizeX + 1);
meshBuilder.AddTriangle (baseIndex + x, vi + sizeX + 2, baseIndex + x + 1);
}
}
}
}
return meshBuilder;
}
void BuildQuadForGrid(MeshBuilder meshBuilder, Vector3 position, Vector2 uv,
bool buildTriangles, int vertsPerRow)
{
meshBuilder.Vertices.Add(position);
meshBuilder.UVs.Add(uv);
if (buildTriangles)
{
int baseIndex = meshBuilder.Vertices.Count - 1;
int index0 = baseIndex;
int index1 = baseIndex - 1;
int index2 = baseIndex - vertsPerRow;
int index3 = baseIndex - vertsPerRow - 1;
meshBuilder.AddTriangle(index0, index2, index1);
meshBuilder.AddTriangle(index2, index3, index1);
}
}
private static object buildTri()
{
var mb = new MeshBuilder(true, false);
var p0 = new Point3D(0, 0, 0);
var p1 = new Point3D(1, 0, 0);
var p2 = new Point3D(1, 1, 0);
mb.AddTriangle(p0, p1, p2);
mb.Normals.ToList().ForEach(x => System.Diagnostics.Trace.WriteLine(x.ToString()));
return mb.ToMesh();
}
static void BuildRing(MeshBuilder meshBuilder, int segmentCount, Vector3 center, float radius,
float v, bool buildTriangles, Quaternion rotation)
{
// Precomputed Sine/Cosine circle drawing from http://slabode.exofire.net/circle_draw.shtml
float theta = 2f * Mathf.PI / (float)segmentCount;
float c = Mathf.Cos(theta);
float s = Mathf.Sin(theta);
float t;
float x = radius;//we start at angle = 0
float y = 0;
// Since we haven't added any yet, we don't need to -1
int ringBaseIndex = meshBuilder.VertexCount;
for (int i = 0; i < segmentCount; i++) {
Vector3 unitPosition = Vector3.zero;
unitPosition.x = x;
unitPosition.z = y;
unitPosition = rotation * unitPosition;
meshBuilder.AddVertex(center + unitPosition);// * radius
meshBuilder.AddNormal(unitPosition);
meshBuilder.AddUV(new Vector2((float)i / segmentCount, v));
if (buildTriangles) {
int vertsPerRow = segmentCount;
int index0 = ringBaseIndex + i;
int index1 = ringBaseIndex + MathHelpers.Mod(i - 1, segmentCount); // before base
int index2 = ringBaseIndex + i - vertsPerRow; // below base
int index3 = ringBaseIndex + MathHelpers.Mod(i - 1, segmentCount) - vertsPerRow; // before below base
// Debug.Log(string.Format("TRI{0}>{1}>{2}", index0, index2, index1));
meshBuilder.AddTriangle(index0, index2, index1);
// Debug.Log(string.Format("TRI{0}>{1}>{2}", index2, index3, index1));
meshBuilder.AddTriangle(index2, index3, index1);
}
t = x;
x = c * x - s * y;
y = s * t + c * y;
}
}
//Initialisation:
private void Start()
{
//Create a new mesh builder:
MeshBuilder meshBuilder = new MeshBuilder();
//Add the vertices:
meshBuilder.Vertices.Add(new Vector3(0.0f, 0.0f, 0.0f));
meshBuilder.UVs.Add(new Vector2(0.0f, 0.0f));
meshBuilder.Normals.Add(Vector3.up);
meshBuilder.Vertices.Add(new Vector3(0.0f, 0.0f, m_Length));
meshBuilder.UVs.Add(new Vector2(0.0f, 1.0f));
meshBuilder.Normals.Add(Vector3.up);
meshBuilder.Vertices.Add(new Vector3(m_Width, 0.0f, m_Length));
meshBuilder.UVs.Add(new Vector2(1.0f, 1.0f));
meshBuilder.Normals.Add(Vector3.up);
meshBuilder.Vertices.Add(new Vector3(m_Width, 0.0f, 0.0f));
meshBuilder.UVs.Add(new Vector2(1.0f, 0.0f));
meshBuilder.Normals.Add(Vector3.up);
//Add the triangles:
meshBuilder.AddTriangle(0, 1, 2);
meshBuilder.AddTriangle(0, 2, 3);
//Create the mesh:
Mesh mesh = meshBuilder.CreateMesh();
//Look for a MeshFilter component attached to this GameObject:
MeshFilter filter = GetComponent<MeshFilter>();
//If the MeshFilter exists, attach the new mesh to it.
//Assuming the GameObject also has a renderer attached, our new mesh will now be visible in the scene.
if (filter != null)
{
filter.sharedMesh = mesh;
}
}
void BuildQuad(MeshBuilder meshBuilder, Vector3 offset)
{
meshBuilder.Vertices.Add(new Vector3(0.0f, 0.0f, 0.0f) + offset);
meshBuilder.UVs.Add(new Vector2(0.0f, 0.0f));
meshBuilder.Normals.Add(Vector3.up);
meshBuilder.Vertices.Add(new Vector3(0.0f, 0.0f, spacing) + offset);
meshBuilder.UVs.Add(new Vector2(0.0f, 1.0f));
meshBuilder.Normals.Add(Vector3.up);
meshBuilder.Vertices.Add(new Vector3(spacing, 0.0f, spacing) + offset);
meshBuilder.UVs.Add(new Vector2(1.0f, 1.0f));
meshBuilder.Normals.Add(Vector3.up);
meshBuilder.Vertices.Add(new Vector3(spacing, 0.0f, 0.0f) + offset);
meshBuilder.UVs.Add(new Vector2(1.0f, 0.0f));
meshBuilder.Normals.Add(Vector3.up);
int baseIndex = meshBuilder.Vertices.Count - 4;
meshBuilder.AddTriangle(baseIndex, baseIndex + 1, baseIndex + 2);
meshBuilder.AddTriangle(baseIndex, baseIndex + 2, baseIndex + 3);
}
void BuildQuad(MeshBuilder meshBuilder, Vector3 offset)
{
meshBuilder.Vertices.Add (new Vector3(0f, 0f, 0f) + offset);
meshBuilder.UVs.Add (new Vector2(0f, 0f));
meshBuilder.Normals.Add (Vector3.up);
meshBuilder.Vertices.Add (new Vector3(0f, 0f, meshLength) + offset);
meshBuilder.UVs.Add (new Vector2(0f, 1f));
meshBuilder.Normals.Add (Vector3.up);
meshBuilder.Vertices.Add (new Vector3(meshWidth, 0f, meshLength) + offset);
meshBuilder.UVs.Add (new Vector2(1f, 1f));
meshBuilder.Normals.Add (Vector3.up);
meshBuilder.Vertices.Add (new Vector3(meshWidth, 0f, 0f) + offset);
meshBuilder.UVs.Add (new Vector2(1f, 0f));
meshBuilder.Normals.Add (Vector3.up);
int baseIndex = meshBuilder.Vertices.Count - 4;
meshBuilder.AddTriangle (baseIndex, baseIndex+1, baseIndex+2);
meshBuilder.AddTriangle (baseIndex, baseIndex+2, baseIndex+3);
}
/// <summary>
/// Builds a single quad in the XZ plane, facing up the Y axis.
/// </summary>
/// <param name="meshBuilder">The mesh builder currently being added to.</param>
/// <param name="offset">A position offset for the quad.</param>
/// <param name="width">The width of the quad.</param>
/// <param name="length">The length of the quad.</param>
public static void BuildQuad(MeshBuilder meshBuilder, Vector3 offset, float width, float length) {
meshBuilder.Vertices.Add(new Vector3(0.0f, 0.0f, 0.0f) + offset);
meshBuilder.UVs.Add(new Vector2(0.0f, 0.0f));
meshBuilder.Normals.Add(Vector3.up);
meshBuilder.Vertices.Add(new Vector3(0.0f, 0.0f, length) + offset);
meshBuilder.UVs.Add(new Vector2(0.0f, 1.0f));
meshBuilder.Normals.Add(Vector3.up);
meshBuilder.Vertices.Add(new Vector3(width, 0.0f, length) + offset);
meshBuilder.UVs.Add(new Vector2(1.0f, 1.0f));
meshBuilder.Normals.Add(Vector3.up);
meshBuilder.Vertices.Add(new Vector3(width, 0.0f, 0.0f) + offset);
meshBuilder.UVs.Add(new Vector2(1.0f, 0.0f));
meshBuilder.Normals.Add(Vector3.up);
//we don't know how many verts the meshBuilder is up to, but we only care about the four we just added:
int baseIndex = meshBuilder.Vertices.Count - 4;
meshBuilder.AddTriangle(baseIndex, baseIndex + 1, baseIndex + 2);
meshBuilder.AddTriangle(baseIndex, baseIndex + 2, baseIndex + 3);
}
/// <summary>
/// Including all Geometry Elements
/// </summary>
/// <param name="ifcElement"></param>
/// <param name="context"></param>
/// <param name="wcsTransformation"></param>
/// <returns></returns>
public static MeshGeometry3D WriteAllTriangles(IIfcProduct ifcElement, Xbim3DModelContext context, XbimMatrix3D wcsTransformation)
{
MeshBuilder meshBuilder = new MeshBuilder(false, false);
// var allTriangles = new List<Triangles>();
foreach (XbimShapeInstance instance in context.ShapeInstancesOf(ifcElement))
{
XbimShapeGeometry geometry = context.ShapeGeometry(instance);
var data = ((IXbimShapeGeometryData)geometry).ShapeData;
using (var stream = new MemoryStream(data))
{
using (var reader = new BinaryReader(stream))
{
XbimShapeTriangulation mesh = reader.ReadShapeTriangulation();
mesh = mesh.Transform(instance.Transformation);
// WCS transforms
mesh = mesh.Transform(wcsTransformation);
foreach (XbimFaceTriangulation face in mesh.Faces)
{
var j = 0;
for (var i = 0; i < face.TriangleCount; i++)
{
int k = i + j;
var point1 = new Point3D {
X = mesh.Vertices[face.Indices[k]].X, Y = mesh.Vertices[face.Indices[k]].Y, Z = mesh.Vertices[face.Indices[k]].Z
};
j++;
k = i + j;
var point2 = new Point3D {
X = mesh.Vertices[face.Indices[k]].X, Y = mesh.Vertices[face.Indices[k]].Y, Z = mesh.Vertices[face.Indices[k]].Z
};
j++;
k = i + j;
var point3 = new Point3D {
X = mesh.Vertices[face.Indices[k]].X, Y = mesh.Vertices[face.Indices[k]].Y, Z = mesh.Vertices[face.Indices[k]].Z
};
meshBuilder.AddTriangle(point1, point2, point3);
}
}
}
}
}
return(meshBuilder.ToMesh());
// return allTriangles;
}
public void AddTriangle_Normals()
{
var mb = new MeshBuilder();
var p0 = new Point3D(0, 0, 0);
var p1 = new Point3D(1, 0, 0);
var p2 = new Point3D(1, 1, 0);
mb.AddTriangle(p0, p1, p2);
Assert.IsTrue(mb.HasNormals);
Assert.AreEqual(3, mb.Normals.Count);
foreach (Point3D normal in mb.Normals)
{
Assert.AreEqual(new Point3D(0, 0, 1), normal);
}
}
// builds the shape
// build quads for spline
protected void BuildQuadSpline(MeshBuilder meshBuilder, Vector3 pointA, Vector3 pointB, Vector3 normalA, Vector3 normalB, int total, bool reverse)
{
// vertices are arranged in this order by point #
// (0, 2) O---O (1, 3)
// if (reverse)
// normal *= -1;
meshBuilder.Vertices.Add(pointA);
meshBuilder.Normals.Add(normalA);
meshBuilder.Vertices.Add(pointB);
meshBuilder.Normals.Add(normalB);
meshBuilder.Vertices.Add(pointA);
meshBuilder.Normals.Add(-normalA);
meshBuilder.Vertices.Add(pointB);
meshBuilder.Normals.Add(-normalB);
int baseIndex = meshBuilder.Vertices.Count - 8;
// check if it has enough data to render the quads
if (baseIndex - total >= 0)
{
if (!reverse)
{
meshBuilder.AddTriangle(baseIndex + 4, baseIndex + 5, baseIndex);
meshBuilder.AddTriangle(baseIndex + 5, baseIndex + 1, baseIndex);
meshBuilder.AddTriangle(baseIndex + 2, baseIndex + 7, baseIndex + 6);
meshBuilder.AddTriangle(baseIndex + 2, baseIndex + 3, baseIndex + 7);
}
else
{
meshBuilder.AddTriangle(baseIndex, baseIndex + 5, baseIndex + 4);
meshBuilder.AddTriangle(baseIndex, baseIndex + 1, baseIndex + 5);
meshBuilder.AddTriangle(baseIndex + 6, baseIndex + 7, baseIndex + 2);
meshBuilder.AddTriangle(baseIndex + 7, baseIndex + 3, baseIndex + 2);
}
}
}
private void LoadWater()
{
if (world.Water == null)
{
return;
}
var waterContainer = new GameObject("water");
waterContainer.transform.SetParent(baseObject.transform, false);
var mb = new MeshBuilder();
mb.AddVertex(new Vector3(-data.InitialSize.x, -world.Water.Level, data.InitialSize.y));
mb.AddVertex(new Vector3(data.InitialSize.x, -world.Water.Level, data.InitialSize.y));
mb.AddVertex(new Vector3(-data.InitialSize.x, -world.Water.Level, -data.InitialSize.y));
mb.AddVertex(new Vector3(data.InitialSize.x, -world.Water.Level, -data.InitialSize.y));
mb.AddNormal(Vector3.up);
mb.AddNormal(Vector3.up);
mb.AddNormal(Vector3.up);
mb.AddNormal(Vector3.up);
mb.AddUV(new Vector2(0, data.InitialSize.y / 2f));
mb.AddUV(new Vector2(data.InitialSize.x / 2f, data.InitialSize.y / 2f));
mb.AddUV(new Vector2(0, 0));
mb.AddUV(new Vector2(data.InitialSize.x / 2f, 0));
mb.AddTriangle(0);
mb.AddTriangle(1);
mb.AddTriangle(3);
mb.AddTriangle(0);
mb.AddTriangle(3);
mb.AddTriangle(2);
var mesh = mb.Build("Water");
var mf = waterContainer.AddComponent <MeshFilter>();
var mr = waterContainer.AddComponent <MeshRenderer>();
var material = AssetDatabase.LoadAssetAtPath <Material>("Assets/Textures/WaterTemp.mat");
mr.material = material;
mr.shadowCastingMode = ShadowCastingMode.Off;
mr.receiveShadows = false;
mr.reflectionProbeUsage = ReflectionProbeUsage.Off;
mr.lightProbeUsage = LightProbeUsage.Off;
mf.sharedMesh = mesh;
}
/// <summary>
/// Builds a single triangle.
/// </summary>
/// <param name="meshBuilder">The mesh builder currently being added to.</param>
/// <param name="corner0">The vertex position at index 0 of the triangle.</param>
/// <param name="corner1">The vertex position at index 1 of the triangle.</param>
/// <param name="corner2">The vertex position at index 2 of the triangle.</param>
protected void BuildTriangle(MeshBuilder meshBuilder, Vector3 corner0, Vector3 corner1, Vector3 corner2)
{
Vector3 normal = Vector3.Cross((corner1 - corner0), (corner2 - corner0)).normalized;
meshBuilder.Vertices.Add(corner0);
meshBuilder.UVs.Add(new Vector2(0.0f, 0.0f));
meshBuilder.Normals.Add(normal);
meshBuilder.Vertices.Add(corner1);
meshBuilder.UVs.Add(new Vector2(0.0f, 1.0f));
meshBuilder.Normals.Add(normal);
meshBuilder.Vertices.Add(corner2);
meshBuilder.UVs.Add(new Vector2(1.0f, 1.0f));
meshBuilder.Normals.Add(normal);
int baseIndex = meshBuilder.Vertices.Count - 3;
meshBuilder.AddTriangle(baseIndex, baseIndex + 1, baseIndex + 2);
}
/// <summary>
/// Colored triangles to visualize overhangs
/// </summary>
/// <param name="angle"></param>
/// <param name="inverted"></param>
/// <returns></returns>
private MeshGeometry3D ShowSteepAngles(double angle, bool inverted)
{
//to store the outgoing mesh
var mesh = new MeshBuilder(true);
MeshGeometry3D scannedMesh = bolus.Mesh();
Vector3D angleDown = new Vector3D(0, 0, -1);
//reference angle for normals
if (inverted)
{
angleDown = new Vector3D(0, 0, 1);
}
//calculate for each triangle
for (int triangle = 0; triangle < scannedMesh.TriangleIndices.Count; triangle += 3)
{
//get the triangle's normal
int i0 = scannedMesh.TriangleIndices[triangle];
int i1 = scannedMesh.TriangleIndices[triangle + 1];
int i2 = scannedMesh.TriangleIndices[triangle + 2];
Point3D p0 = scannedMesh.Positions[i0];
Point3D p1 = scannedMesh.Positions[i1];
Point3D p2 = scannedMesh.Positions[i2];
var normal = CalculateSurfaceNormal(p0, p1, p2);
//calculate normal's angle from the ground
//using the z-axis as to determine how the angle if from the ground
var degrees = Vector3D.AngleBetween(normal, angleDown);
//if angle less than steepangle, add the triangle to the overhang mesh
if (degrees < angle)
{
mesh.AddTriangle(p0, p1, p2);
}
}
return(mesh.ToMesh());
}
private static void CreatePolygon(VectorTileFeature feature, Pallete pallete, Model3DGroup model3DGroup, Vector2 <int> shiftCoords)
{
PointCollection points = new PointCollection();
List <List <Vector2 <int> > > list = feature.Geometry <int>();
foreach (List <Vector2 <int> > item in list)
{
points.Clear();
foreach (Vector2 <int> point in item)
{
points.Add(new Point(point.X + shiftCoords.X, point.Y + shiftCoords.Y));
}
points.RemoveAt(points.Count - 1);
var model = new GeometryModel3D();
var meshbuilder = new MeshBuilder(true, true);
var result = CuttingEarsTriangulator.Triangulate(points);
List <int> tri = new List <int>();
for (int i = 0; i < result.Count; i++)
{
tri.Add(result[i]);
if (tri.Count == 3)
{
//Console.WriteLine("Triangle " + (i / 3).ToString() + " : " + tri[0].ToString() + ", " + tri[1].ToString() + ", " + tri[2].ToString());
meshbuilder.AddTriangle(new Point3D(points[tri[0]].X, points[tri[0]].Y, 1),
new Point3D(points[tri[1]].X, points[tri[1]].Y, 1),
new Point3D(points[tri[2]].X, points[tri[2]].Y, 1));
tri.Clear();
}
}
model.Geometry = meshbuilder.ToMesh();
model.Material = MaterialHelper.CreateMaterial(pallete.MainFillColor.ToMediaColor());
model3DGroup.Children.Add(model);
}
}
public GeometryModel3D GenerateInteractionDiagram(Column column, Color color)
{
double scaleXYZ = 10;
Console.WriteLine("MaxMX = {0}, MaxMy = {1}, MaxP = {2}", batchDesign.MaxMx, batchDesign.MaxMy, batchDesign.MaxP);
List <Point3D> normalPoints = column.diagramVertices.Select(x => new Point3D(x.X / BatchDesign.MaxMx, x.Y / BatchDesign.MaxMy, -x.Z / BatchDesign.MaxP)).ToList();
normalPoints = normalPoints.Select(x => new Point3D(scaleXYZ * x.X, scaleXYZ * x.Y, scaleXYZ * x.Z)).ToList();
var meshBuilder = new MeshBuilder(false, true);
for (int i = 0; i < normalPoints.Count; i++)
{
Point3D pt = normalPoints[i];
meshBuilder.Positions.Add(pt);
meshBuilder.TextureCoordinates.Add(new Point());
}
for (int i = 0; i < column.diagramFaces.Count; i++)
{
var t = column.diagramFaces[i];
meshBuilder.AddTriangle(new List <int> {
column.diagramVertices.IndexOf(t.Points[0]),
column.diagramVertices.IndexOf(t.Points[1]),
column.diagramVertices.IndexOf(t.Points[2])
});
meshBuilder.AddCylinder(normalPoints[column.diagramVertices.IndexOf(t.Points[0])],
normalPoints[column.diagramVertices.IndexOf(t.Points[1])], 0.05, 8);
meshBuilder.AddCylinder(normalPoints[column.diagramVertices.IndexOf(t.Points[1])],
normalPoints[column.diagramVertices.IndexOf(t.Points[2])], 0.05, 8);
meshBuilder.AddCylinder(normalPoints[column.diagramVertices.IndexOf(t.Points[0])],
normalPoints[column.diagramVertices.IndexOf(t.Points[2])], 0.05, 8);
}
//var mat = new DiffuseMaterial(GradientBrushes.BlueWhiteRed);
var mesh = new GeometryModel3D(meshBuilder.ToMesh(), MaterialHelper.CreateMaterial(color));
mesh.BackMaterial = mesh.Material;
return(mesh);
}
public PartMesh(string filename)
{
var meshBuilder = new MeshBuilder(false, false);
var min = new Point3D(double.PositiveInfinity, double.PositiveInfinity, double.PositiveInfinity);
var max = new Point3D(double.NegativeInfinity, double.NegativeInfinity, double.NegativeInfinity);
using (var stream = modelAssembly.GetManifestResourceStream("Hexenstein.Models." + filename))
using (var reader = new BinaryReader(stream))
{
var header = reader.ReadBytes(80);
var num = reader.ReadUInt32();
for (int i = 0; i < num; i++)
{
var normal = ReadPoint(reader);
var v1 = ReadPoint(reader);
var v2 = ReadPoint(reader);
var v3 = ReadPoint(reader);
var extra = reader.ReadInt16();
meshBuilder.AddTriangle(v1, v2, v3);
min = new Point3D(
Math.Min(Math.Min(Math.Min(min.X, v1.X), v2.X), v3.X),
Math.Min(Math.Min(Math.Min(min.Y, v1.Y), v2.Y), v3.Y),
Math.Min(Math.Min(Math.Min(min.Z, v1.Z), v2.Z), v3.Z));
max = new Point3D(
Math.Max(Math.Max(Math.Max(max.X, v1.X), v2.X), v3.X),
Math.Max(Math.Max(Math.Max(max.Y, v1.Y), v2.Y), v3.Y),
Math.Max(Math.Max(Math.Max(max.Z, v1.Z), v2.Z), v3.Z));
}
}
Centre = ((max - min) / 2 + min);
Mesh = meshBuilder.ToMesh(true);
}
public void BuildMesh()
{
GetDeformedMesh();
var modelGroup = new Model3DGroup();
MeshBuilder meshBuilder = new MeshBuilder(false, true);
//List<Point3D> pointDisps = DeformedMesh.Select(p => new Point3D(p.X, p.Y, p.Z)).ToList();
DeformedMesh.ForEach(p =>
{
meshBuilder.Positions.Add(p);
meshBuilder.TextureCoordinates.Add(new System.Windows.Point());
});
results.T3.ForEach(t =>
{
meshBuilder.AddTriangle(new List <int> {
t[0], t[1], t[2]
});
meshBuilder.AddCylinder(DeformedMesh[t[0]], DeformedMesh[t[1]], 0.05, 4);
meshBuilder.AddCylinder(DeformedMesh[t[1]], DeformedMesh[t[2]], 0.05, 4);
meshBuilder.AddCylinder(DeformedMesh[t[0]], DeformedMesh[t[2]], 0.05, 4);
});
//fem.modelGeo.Beams.ForEach(b =>
//{
// meshBuilder.AddCylinder(new Point3D(b.Start.X, b.Start.Y, b.Start.Z), new Point3D(b.End.X, b.End.Y, b.End.Z), 0.1, 8);
//});
results.L2.ForEach(l =>
{
var p1 = DeformedMesh[l[0]];
var p2 = DeformedMesh[l[1]];
meshBuilder.AddCylinder(p1, p2, 0.1, 8);
});
var color = Color.FromArgb(150, 200, 0, 0);
var mesh = new GeometryModel3D(meshBuilder.ToMesh(), MaterialHelper.CreateMaterial(color));
mesh.BackMaterial = mesh.Material;
modelGroup.Children.Add(mesh);
Mesh = modelGroup;
}
private void gambarproyeksi()
{
var tembokrumah = new MeshBuilder(false, false);
var ataprumah = new MeshBuilder(false, false);
var garisproyeksi = new MeshBuilder(false, false);
tembokrumah.AddBox(new Point3D((titik2[0].X + titik2[2].X) / 2, (titik2[0].Y + titik2[2].Y) / 2, (titik2[0].Z + titik2[2].Z) / 2), (titik2[2].X - titik2[0].X), (titik2[2].Y - titik2[0].Y), (titik2[2].Z - titik2[0].Z));
tembokrumah.AddBox(new Point3D((titik2[0].X + titik2[5].X) / 2, (titik2[0].Y + titik2[5].Y) / 2, (titik2[0].Z + titik2[5].Z) / 2), (titik2[5].X - titik2[0].X), (titik2[5].Y - titik2[0].Y), (titik2[5].Z - titik2[0].Z));
tembokrumah.AddBox(new Point3D((titik2[1].X + titik2[6].X) / 2, (titik2[1].Y + titik2[6].Y) / 2, (titik2[1].Z + titik2[6].Z) / 2), (titik2[6].X - titik2[1].X), (titik2[6].Y - titik2[1].Y), (titik2[6].Z - titik2[1].Z));
tembokrumah.AddBox(new Point3D((titik2[2].X + titik2[7].X) / 2, (titik2[2].Y + titik2[7].Y) / 2, (titik2[2].Z + titik2[7].Z) / 2), (titik2[7].X - titik2[2].X), (titik2[7].Y - titik2[2].Y), (titik2[7].Z - titik2[2].Z));
tembokrumah.AddBox(new Point3D((titik2[3].X + titik2[4].X) / 2, (titik2[3].Y + titik2[4].Y) / 2, (titik2[3].Z + titik2[4].Z) / 2), (titik2[4].X - titik2[3].X), (titik2[4].Y - titik2[3].Y), (titik2[4].Z - titik2[3].Z));
ataprumah.AddTriangle(titik2[4], titik2[5], titik2[8]);
ataprumah.AddTriangle(titik2[6], titik2[7], titik2[9]);
ataprumah.AddTriangle(titik2[5], titik2[6], titik2[8]);
ataprumah.AddTriangle(titik2[7], titik2[4], titik2[8]);
ataprumah.AddTriangle(titik2[9], titik2[8], titik2[6]);
ataprumah.AddTriangle(titik2[8], titik2[9], titik2[7]);
var titikproyeksi = new Point3D(0, 0, Convert.ToDouble(TextBox_titiklenyapz.Text));
garisproyeksi.AddPipe(titikproyeksi, titik[0], 0, 0.02, 90);
garisproyeksi.AddPipe(titikproyeksi, titik[1], 0, 0.02, 90);
garisproyeksi.AddPipe(titikproyeksi, titik[2], 0, 0.02, 90);
garisproyeksi.AddPipe(titikproyeksi, titik[3], 0, 0.02, 90);
garisproyeksi.AddPipe(titikproyeksi, titik[4], 0, 0.02, 90);
garisproyeksi.AddPipe(titikproyeksi, titik[5], 0, 0.02, 90);
garisproyeksi.AddPipe(titikproyeksi, titik[6], 0, 0.02, 90);
garisproyeksi.AddPipe(titikproyeksi, titik[7], 0, 0.02, 90);
garisproyeksi.AddPipe(titikproyeksi, titik[8], 0, 0.02, 90);
garisproyeksi.AddPipe(titikproyeksi, titik[9], 0, 0.02, 90);
objects.Children.Add(new GeometryModel3D
{
Geometry = garisproyeksi.ToMesh(true),
Material = MaterialHelper.CreateMaterial(Colors.Yellow)
});
objects.Children.Add(new GeometryModel3D
{
Geometry = tembokrumah.ToMesh(true),
Material = MaterialHelper.CreateMaterial(Colors.DarkGray)
});
objects.Children.Add(new GeometryModel3D
{
Geometry = ataprumah.ToMesh(true),
Material = MaterialHelper.CreateMaterial(Colors.DarkGray)
});
placedobjects.Content = objects;
}
MeshBuilder GenerateCurveTriangles(MeshBuilder meshBuilder, bool doubleTriangles = false)
{
int baseIndex = 0;
int sizeX = 2;
int sizeY = meshBuilder.Vertices.Count / 3 - 1;
int vi = baseIndex;
for (int y = 0; y < sizeY; y++, vi++)
{
for (int x = 0; x < sizeX; x++, vi++)
{
meshBuilder.AddTriangle(vi, vi + sizeX + 1, vi + 1);
meshBuilder.AddTriangle(vi + 1, vi + sizeX + 1, vi + sizeX + 2);
if (y == sizeY - 1)
{
meshBuilder.AddTriangle(vi + sizeX + 1, baseIndex + x, vi + sizeX + 2);
meshBuilder.AddTriangle(baseIndex + x + 1, vi + sizeX + 2, baseIndex + x);
}
if (doubleTriangles)
{
meshBuilder.AddTriangle(vi + 1, vi + sizeX + 1, vi);
meshBuilder.AddTriangle(vi + sizeX + 2, vi + sizeX + 1, vi + 1);
if (y == sizeY - 1)
{
meshBuilder.AddTriangle(vi + sizeX + 2, baseIndex + x, vi + sizeX + 1);
meshBuilder.AddTriangle(baseIndex + x, vi + sizeX + 2, baseIndex + x + 1);
}
}
}
}
return(meshBuilder);
}
// build quads for spline
protected void BuildQuadSpline(MeshBuilder meshBuilder, Vector3 point, Vector3 normal, int total, Vector3 startOffset, Vector3 endOffset, int pointOffset, bool reverse)
{
// vertices are arranged in this order by point #
// (0, 1) O---O (2, 3)
// (n, n+1) O---O (n+2, n+3)
if (reverse)
{
normal *= -1;
}
meshBuilder.Vertices.Add(point + startOffset);
meshBuilder.Normals.Add(normal);
meshBuilder.Vertices.Add(point + endOffset);
meshBuilder.Normals.Add(-normal);
int baseIndex = meshBuilder.Vertices.Count - total - 4;
if (baseIndex - pointOffset >= 0 && ((baseIndex - pointOffset + 2) % total) != 0)
{
if (!reverse)
{
meshBuilder.AddTriangle(baseIndex, baseIndex + 2, baseIndex + total);
meshBuilder.AddTriangle(baseIndex + total + 2, baseIndex + total, baseIndex + 2);
meshBuilder.AddTriangle(baseIndex + total + 1, baseIndex + 3, baseIndex + 1);
meshBuilder.AddTriangle(baseIndex + 3, baseIndex + total + 1, baseIndex + total + 3);
}
else
{
meshBuilder.AddTriangle(baseIndex + total, baseIndex + 2, baseIndex);
meshBuilder.AddTriangle(baseIndex + 2, baseIndex + total, baseIndex + total + 2);
meshBuilder.AddTriangle(baseIndex + +1, baseIndex + 3, baseIndex + total + 1);
meshBuilder.AddTriangle(baseIndex + total + 3, baseIndex + total + 1, baseIndex + 3);
}
}
}
private void CreateVisual()
{
_initialSeed = _curData.Seed;
if (_curData.IsInGame)
{
var builder = new MeshBuilder(true, false);
List <Tripper.Tools.Math.Vector3> verts;
List <int> indices;
if (!RDPathfinder.UseNewGetTris)
{
RDPathfinder.GetTris(_curData.CachedTerrainData, 2, out verts, out indices); // 2 is the walkable value used for pathfinding
}
else
{
RDPathfinder.GetTris2(_curData.CachedTerrainData, 2, out verts, out indices, out var rects); // 2 is the walkaloe value used for pathfinding
}
for (int i = 0; i < indices.Count - 3; i += 3)
{
var p0 = verts[indices[i + 2]];
var p1 = verts[indices[i + 1]];
var p2 = verts[indices[i + 0]];
// We need to swap Y/Z for display purposes.
builder.AddTriangle(new Point3D(p0.X, p0.Z, p0.Y), new Point3D(p1.X, p1.Z, p1.Y), new Point3D(p2.X, p2.Z, p2.Y));
}
LokiPoe.BeginDispatchIfNecessary(View.Dispatcher,
() => (Visual as MeshVisual3D).Content = new GeometryModel3D(builder.ToMesh(true), Materials.White));
}
else
{
LokiPoe.BeginDispatchIfNecessary(View.Dispatcher, () => (Visual as MeshVisual3D).Content = null);
}
}
/// <summary>
/// Method for building cone at the specified center. Tip length specifies the length of the needle tip
/// </summary>
public void BuildTip(MeshBuilder meshBuilder, int m_RadialSegmentCount, Vector3 centre, float m_Radius, Vector3 normal, float tipLength)
{
//one vertex in the center:
meshBuilder.Vertices.Add(centre + tipLength * normal);
meshBuilder.Normals.Add(Vector3.up);
meshBuilder.UVs.Add(new Vector2(0.5f, 0.5f));
int centreVertexIndex = meshBuilder.Vertices.Count - 1;
Quaternion rotation = Quaternion.FromToRotation(Vector3.up, normal);
//vertices around the edge:
float angleInc = (Mathf.PI * 2.0f) / m_RadialSegmentCount;
for (int i = 0; i <= m_RadialSegmentCount; i++)
{
float angle = angleInc * i;
Vector3 unitPosition = Vector3.zero;
unitPosition.x = Mathf.Cos(angle);
unitPosition.z = Mathf.Sin(angle);
unitPosition = rotation * unitPosition;
meshBuilder.Vertices.Add(centre + unitPosition * m_Radius);
meshBuilder.Normals.Add(unitPosition);
Vector2 uv = new Vector2(unitPosition.x + 1.0f, unitPosition.z + 1.0f) * 0.5f;
meshBuilder.UVs.Add(uv);
//build a triangle:
if (i > 0)
{
int baseIndex = meshBuilder.Vertices.Count - 1;
meshBuilder.AddTriangle(centreVertexIndex, baseIndex, baseIndex - 1);
}
}
}
private void CreateSubdividedIcosahedron()
{
ClearModels();
var builder = new MeshBuilder();
Vector3 ToVector3(System.Numerics.Vector3 vec) =>
new Vector3(vec.X, vec.Y, vec.Z);
var icosahedronCreator = new IcosahedronCreator(IcosahedronSubdivision);
icosahedronCreator.Generate();
foreach (var trianglePositions in icosahedronCreator.Faces)
{
builder.AddTriangle(ToVector3(trianglePositions[0]), ToVector3(trianglePositions[1]), ToVector3(trianglePositions[2]));
}
var mesh = builder.ToMeshGeometry3D();
var random = new Random();
mesh.Colors = new Color4Collection(mesh.TextureCoordinates.Select(x => random.NextColor().ToColor4()));
Model = mesh;
RaisePropertyChanged(nameof(Model));
}
public bool VisualizeMesh(MeshBuilder meshBuilder, MeshGeometry3D mesh, DiffuseMaterial mat)
{
// Output on console
var points = new List <Point3D>();
foreach (var item in mesh.Positions)
{
points.Add(new Point3D {
X = item.X, Y = item.Y, Z = item.Z
});
}
for (var i = 0; i < mesh.TriangleIndices.Count; i += 3)
{
meshBuilder.AddTriangle(points[mesh.TriangleIndices[i]], points[mesh.TriangleIndices[i + 1]],
points[mesh.TriangleIndices[i + 2]]);
}
var myGeometryModel = new GeometryModel3D
{
//Material = new DiffuseMaterial(new SolidColorBrush(Colors.Aqua)),
//BackMaterial = new DiffuseMaterial(new SolidColorBrush(Colors.Red)),
Material = mat,
Geometry = meshBuilder.ToMesh(true)
// In case that you have to rotate the model ...
// Transform = new RotateTransform3D(new AxisAngleRotation3D(new Vector3D(1, 0, 0), 90))
};
var element = new ModelUIElement3D {
Model = myGeometryModel
};
// Add the Mesh to the ViewPort
_viewPort.Children.Add(element);
return(true);
}
/// <summary>
/// Builds a ring as part of a sphere. Normals are calculated as directions from the sphere's centre.
/// </summary>
/// <param name="meshBuilder">The mesh builder currently being added to.</param>
/// <param name="segmentCount">The number of segments in this ring.</param>
/// <param name="centre">The position at the centre of the ring.</param>
/// <param name="radius">The radius of the ring.</param>
/// <param name="v">The V coordinate for this ring.</param>
/// <param name="buildTriangles">Should triangles be built for this ring? This value should be false if this is the first ring in the cylinder.</param>
public static void BuildRingForSphere(MeshBuilder meshBuilder, int segmentCount, Vector3 centre, float radius, float v, bool buildTriangles) {
float angleInc = (Mathf.PI * 2.0f) / segmentCount;
for (int i = 0; i <= segmentCount; i++) {
float angle = angleInc * i;
Vector3 unitPosition = Vector3.zero;
unitPosition.x = Mathf.Cos(angle);
unitPosition.z = Mathf.Sin(angle);
Vector3 vertexPosition = centre + unitPosition * radius;
meshBuilder.Vertices.Add(vertexPosition);
meshBuilder.Normals.Add(vertexPosition.normalized);
meshBuilder.UVs.Add(new Vector2((float)i / segmentCount, v));
if (i > 0 && buildTriangles) {
int baseIndex = meshBuilder.Vertices.Count - 1;
int vertsPerRow = segmentCount + 1;
int index0 = baseIndex;
int index1 = baseIndex - 1;
int index2 = baseIndex - vertsPerRow;
int index3 = baseIndex - vertsPerRow - 1;
meshBuilder.AddTriangle(index0, index2, index1);
meshBuilder.AddTriangle(index2, index3, index1);
}
}
}
/// <summary>
/// Builds a ring as part of a Bezier Curve.
/// </summary>
/// <param name="meshBuilder">The mesh builder currently being added to.</param>
/// <param name="segmentCount">The number of segments in this ring.</param>
/// <param name="centre">The position at the centre of the ring.</param>
/// <param name="radius">The radius of the ring.</param>
/// <param name="v">The V coordinate for this ring.</param>
/// <param name="buildTriangles">Should triangles be built for this ring? This value should be false if this is the first ring in the cylinder.</param>
/// <param name="rotation">A rotation value to be applied to the whole ring.</param>
/// <param name="slope">The normalised slope (rise and run) of the cylinder at this height.</param>
public static void BuildBezierCurveRing(MeshBuilder meshBuilder, int segmentCount, Vector3 center, float radius, float v, bool buildTriangles, Quaternion rotation) {
float angleInc = (Mathf.PI * 2.0f) / segmentCount;
for (int i = 0; i <= segmentCount; i++) {
float angle = angleInc * i;
Vector3 unitPosition = Vector3.zero;
unitPosition.x = Mathf.Cos(angle);
unitPosition.y = Mathf.Sin(angle);
unitPosition = rotation * unitPosition;
Vector3 normal = unitPosition;
meshBuilder.Vertices.Add(center + unitPosition * radius);
meshBuilder.Normals.Add(normal);
//meshBuilder.UVs.Add(new Vector2((float)i / segmentCount, v));
meshBuilder.UVs.Add(new Vector2((float)i / segmentCount, v));
if (i > 0 && buildTriangles) {
//Debug.Log ("buildTriangles!");
int baseIndex = meshBuilder.Vertices.Count - 1;
int vertsPerRow = segmentCount + 1;
int index0 = baseIndex;
int index1 = baseIndex - 1;
int index2 = baseIndex - vertsPerRow;
int index3 = baseIndex - vertsPerRow - 1;
meshBuilder.AddTriangle(index1, index2, index0);
meshBuilder.AddTriangle(index1, index3, index2);
}
}
}
/// <summary>
/// Adds the triangle.
/// </summary>
/// <param name="bulder">The bulder.</param>
/// <param name="p1">The p1.</param>
/// <param name="p2">The p2.</param>
/// <param name="p3">The p3.</param>
public static void AddTriangle(this MeshBuilder bulder, Point p1, Point p2, Point p3)
{
bulder.AddTriangle(p1.ToPoint3D(), p2.ToPoint3D(), p3.ToPoint3D());
}
public void MakeBlades3()
{
var splines = GetSplines();
var spars = GetSpars();
MeshBuilder builder = new MeshBuilder(true, true);
for (int i = 0; i < splines.Length; i++)
{
var currSpline = splines[i];
if (i < splines.Length - 1)
{
var nextSpline = splines[i + 1];
for (int j = 0; j < currSpline.Count; j++)
{
Point3D currPoint = currSpline[j];
Point3D pt1, pt2;
Find2NN(currPoint, nextSpline, out pt1, out pt2);
builder.AddTriangle(currPoint, pt1, pt2);
if (j > 0)
{
Point3D prevPoint = currSpline[j - 1];
Point3D pt3 = FindNN(currPoint, prevPoint, nextSpline);
builder.AddTriangle(currPoint, prevPoint, pt3);
}
if (j < currSpline.Count - 1)
{
Point3D nextPoint = currSpline[j + 1];
Point3D pt3 = FindNN(currPoint, nextPoint, nextSpline);
builder.AddTriangle(currPoint, nextPoint, pt3);
}
}
}
if (i > 0)
{
var prevSpline = splines[i - 1];
for (int j = 0; j < currSpline.Count; j++)
{
Point3D currPoint = currSpline[j];
Point3D pt1, pt2;
Find2NN(currPoint, prevSpline, out pt1, out pt2);
builder.AddTriangle(currPoint, pt1, pt2);
if (j > 0)
{
Point3D prevPoint = currSpline[j - 1];
Point3D pt3 = FindNN(currPoint, prevPoint, prevSpline);
builder.AddTriangle(currPoint, prevPoint, pt3);
}
if (j < currSpline.Count - 1)
{
Point3D nextPoint = currSpline[j + 1];
Point3D pt3 = FindNN(currPoint, nextPoint, prevSpline);
builder.AddTriangle(currPoint, nextPoint, pt3);
}
}
}
}
bladePlot.MeshGeometry = builder.ToMesh();
}
public void Generate()
{
MeshFilter filter = gameObject.GetComponent <MeshFilter>();
MeshBuilder meshBuilder = new MeshBuilder();
// Face 0 - Front
meshBuilder.Vertices.Add(new Vector3(0, 0, 0f));
meshBuilder.Vertices.Add(new Vector3(1f, 0f, 0f));
meshBuilder.Vertices.Add(new Vector3(0f, 1f, 0f));
meshBuilder.Vertices.Add(new Vector3(1f, 1f, 0f));
meshBuilder.AddTriangle(0, 1, 2);
meshBuilder.AddTriangle(1, 3, 2);
// Face 1 - Up
meshBuilder.Vertices.Add(new Vector3(0.5f, 1f, 0.5f));
meshBuilder.Vertices.Add(new Vector3(0f, 1f, 1f));
meshBuilder.Vertices.Add(new Vector3(1f, 1f, 1f));
meshBuilder.AddTriangle(2, 3, 4);
meshBuilder.AddTriangle(5, 2, 4);
meshBuilder.AddTriangle(4, 3, 6);
meshBuilder.AddTriangle(4, 6, 5);
// Face 2 - Left
meshBuilder.Vertices.Add(new Vector3(0f, 0f, 1f));
meshBuilder.AddTriangle(0, 2, 5);
meshBuilder.AddTriangle(7, 0, 5);
// Face 3 - Back
meshBuilder.Vertices.Add(new Vector3(1f, 0f, 1f));
meshBuilder.AddTriangle(5, 8, 7);
meshBuilder.AddTriangle(6, 8, 5);
// Face 4 - Right
meshBuilder.AddTriangle(3, 1, 6);
meshBuilder.AddTriangle(6, 1, 8);
// Face 5 - Down
meshBuilder.Vertices.Add(new Vector3(0.5f, 0f, 0.5f));
meshBuilder.AddTriangle(9, 1, 0);
meshBuilder.AddTriangle(9, 8, 1);
meshBuilder.AddTriangle(9, 7, 8);
meshBuilder.AddTriangle(9, 0, 7);
MeshProcessing.SubdivideTrianglesIn4(meshBuilder);
MeshProcessing.SubdivideTrianglesIn4(meshBuilder);
MeshProcessing.SubdivideTrianglesIn4(meshBuilder);
MeshProcessing.SubdivideTrianglesIn4(meshBuilder);
// MeshProcessing.SubdivideTriangles(meshBuilder);
// MeshProcessing.SubdivideTriangles(meshBuilder);
// MeshProcessing.SubdivideTriangles(meshBuilder);
// MeshProcessing.SubdivideTriangles(meshBuilder);
for (int i = 0; i < meshBuilder.Vertices.Count; i++)
{
Vector3 v = (meshBuilder.Vertices[i] - 0.5f * Vector3.one).normalized;
Vector2 longlat = new Vector2(Mathf.Atan2(v.x, v.z) + Mathf.PI, Mathf.Acos(v.y));
Vector2 uv = new Vector2(longlat.x / (2f * Mathf.PI), longlat.y / Mathf.PI);
uv.y = 1f - uv.y;
uv.x = 1f - uv.x;
meshBuilder.UVs.Add(uv);
}
int[] triangles = meshBuilder.GetTriangles();
int v1, v2, v3, t1, t2, t3;
float uv1, uv2, uv3;
for (int i = 0; i < triangles.Length / 3; i++)
{
t1 = 3 * i;
t2 = 3 * i + 1;
t3 = 3 * i + 2;
v1 = triangles[t1];
v2 = triangles[t2];
v3 = triangles[t3];
uv1 = meshBuilder.UVs[v1].x;
uv2 = meshBuilder.UVs[v2].x;
uv3 = meshBuilder.UVs[v3].x;
if (!VerifyWrongTriangleUV(uv1, uv2, uv3, v2, v3, t2, t3, meshBuilder))
{
if (!VerifyWrongTriangleUV(uv2, uv1, uv3, v1, v3, t1, t3, meshBuilder))
{
VerifyWrongTriangleUV(uv3, uv2, uv1, v2, v1, t2, t1, meshBuilder);
}
}
}
Mesh mesh = meshBuilder.CreateMesh();
mesh.RecalculateBounds();
filter.mesh = mesh;
}
public void Draw()
{
bool[] processed = new bool[8];
foreach (CubeNode nd in Vertices())
{
if (debug)
{
GD.Print(nd.x, " ", nd.y, " ", nd.z, " ", nd.IsIn());
}
if (processed[nd.Index()])
{
continue;
}
HashSet <CubeNode> connected = nd.AllConnected();
if (debug)
{
GD.Print(connected.Count);
}
if (connected.Count == 1)
{
if (debug)
{
GD.Print("Single");
}
meshBuilder.AddTriangle(cubeIndex, nd, 0, nd, 1, nd, 2);
processed[nd.Index()] = true;
continue;
}
if (connected.Count == 2)
{
IEnumerator <CubeNode> e = connected.GetEnumerator();
e.MoveNext();
CubeNode n1 = e.Current;
e.MoveNext();
CubeNode n2 = e.Current;
int nbAxis = n1.WhichAxis(n2);
meshBuilder.AddTriangle(cubeIndex, n1, (nbAxis + 1) % 3, n2, (nbAxis + 1) % 3, n2, (nbAxis + 2) % 3);
meshBuilder.AddTriangle(cubeIndex, n2, (nbAxis + 2) % 3, n1, (nbAxis + 2) % 3, n1, (nbAxis + 1) % 3);
if (debug)
{
GD.Print("Double");
}
processed[n1.Index()] = true;
processed[n2.Index()] = true;
continue;
}
if (connected.Count == 3)
{
// find middle elem
CubeNode md = nd;
foreach (CubeNode n in connected)
{
if (n.CountNbs() == 2)
{
md = n;
}
}
int axis = 0;
for (int i = 0; i < 3; i++)
{
if (md.Nb(i).IsIn() != md.IsIn())
{
axis = i;
}
}
CubeNode nb1 = md.Nb((axis + 1) % 3);
CubeNode nb2 = md.Nb((axis + 2) % 3);
Vector3 intermediate1 = nb1.Intermediate(axis);
Vector3 intermediate2 = nb2.Intermediate(axis);
// parallel
meshBuilder.AddTriangle(cubeIndex, md, axis, nb1, axis, nb2, axis);
// part 1
meshBuilder.AddTriangle(cubeIndex, nb1, axis, nb2, axis, nb1, (axis + 2) % 3);
// part 2
meshBuilder.AddTriangle(cubeIndex, nb1, (axis + 2) % 3, nb2, (axis + 1) % 3, nb2, axis);
if (debug)
{
GD.Print("Trio");
}
processed[md.Index()] = true;
processed[nb1.Index()] = true;
processed[nb2.Index()] = true;
continue;
}
if (connected.Count > 4)
{
foreach (CubeNode c in connected)
{
processed[c.Index()] = true;
}
continue;
}
if (!nd.IsIn())
{
foreach (CubeNode c in connected)
{
processed[c.Index()] = true;
}
continue;
}
// connected.Count is 4
// square, tetra or line
CubeNode mid = nd;
bool tetra = false;
foreach (CubeNode c in connected)
{
if (c.CountNbs() == 3)
{
// tetra
mid = c;
tetra = true;
}
}
if (tetra)
{
CubeNode n0 = mid.Nb(0);
CubeNode n1 = mid.Nb(1);
CubeNode n2 = mid.Nb(2);
meshBuilder.AddTriangle(cubeIndex, n0, 1, n1, 0, n1, 2);
meshBuilder.AddTriangle(cubeIndex, n0, 1, n1, 2, n0, 2);
meshBuilder.AddTriangle(cubeIndex, n1, 2, n0, 2, n2, 1);
meshBuilder.AddTriangle(cubeIndex, n0, 2, n2, 1, n2, 0);
if (debug)
{
GD.Print("Tetra");
}
processed[mid.Index()] = true;
processed[n0.Index()] = true;
processed[n1.Index()] = true;
processed[n2.Index()] = true;
continue;
}
bool sameX = true, sameY = true, sameZ = true;
foreach (CubeNode n in connected)
{
if (n.x != nd.x)
{
sameX = false;
}
if (n.y != nd.y)
{
sameY = false;
}
if (n.z != nd.z)
{
sameZ = false;
}
}
if (sameX || sameY || sameZ)
{
int axis = 0;
if (sameY)
{
axis = 1;
}
if (sameZ)
{
axis = 2;
}
// plane
meshBuilder.AddTriangle(cubeIndex,
nd, axis,
nd.Nb((axis + 1) % 3), axis,
nd.Nb((axis + 2) % 3), axis);
meshBuilder.AddTriangle(cubeIndex,
nd.Nb((axis + 1) % 3), axis,
nd.Nb((axis + 2) % 3), axis,
nd.Nb((axis + 1) % 3).Nb((axis + 2) % 3), axis);
if (debug)
{
GD.Print("Plane");
}
foreach (CubeNode c in connected)
{
processed[c.Index()] = true;
}
continue;
}
// line
CubeNode l1 = nd, l2 = nd, l3 = nd, l4 = nd;
foreach (CubeNode n in connected)
{
if (n.CountNbs() == 1)
{
l1 = n;
}
}
foreach (CubeNode n in connected)
{
if (l1.WhichAxis(n) != -1)
{
l2 = n;
}
}
foreach (CubeNode n in connected)
{
if (n.Index() != l1.Index() && l2.WhichAxis(n) != -1)
{
l3 = n;
}
}
foreach (CubeNode n in connected)
{
if (n.Index() != l2.Index() && l3.WhichAxis(n) != -1)
{
l4 = n;
}
}
int axis1 = l1.WhichAxis(l2);
int axis2 = l2.WhichAxis(l3);
int axis3 = l3.WhichAxis(l4);
meshBuilder.AddTriangle(cubeIndex, l1, axis3, l2, axis3, l1, axis2);
meshBuilder.AddTriangle(cubeIndex, l1, axis2, l3, axis1, l4, axis1);
meshBuilder.AddTriangle(cubeIndex, l2, axis3, l1, axis2, l4, axis1);
meshBuilder.AddTriangle(cubeIndex, l2, axis3, l4, axis1, l4, axis2);
if (debug)
{
GD.Print("Line");
}
foreach (CubeNode c in connected)
{
processed[c.Index()] = true;
}
continue;
}
// geometry.End();
}
public static MeshBuilder AddVerticesAndTriangles(this MeshBuilder builder, int configuration)
{
switch (configuration)
{
case 0b0001: return(builder.AddTriangle(zero, up * 0.5f, right * 0.5f));
case 0b0010: return(builder.AddTriangle(right * 0.5f, new Vector3(1f, 0.5f), right));
case 0b0011:
return(builder.AddTriangle(zero, up * 0.5f, new Vector3(1f, 0.5f))
.AddTriangle(zero, new Vector3(1f, 0.5f), right));
case 0b0100:
return(builder.AddTriangle(new Vector3(1f, 1f), new Vector3(1f, 0.5f),
new Vector3(0.5f, 1f)));
case 0b0101:
return(builder.AddTriangle(up * 0.5f, right * 0.5f, zero)
.AddTriangle(new Vector3(0.5f, 1f), new Vector3(1f, 1f), new Vector3(1f, 0.5f)));
case 0b0110:
return(builder.AddTriangle(new Vector3(0.5f, 0f), new Vector3(1f, 1f), right)
.AddTriangle(new Vector3(0.5f, 0f), new Vector3(0.5f, 1f), new Vector3(1f, 1f)));
case 0b0111:
return(builder.AddTriangle(zero, new Vector3(0f, 0.5f), new Vector3(0.5f, 1f))
.AddTriangle(zero, new Vector3(0.5f, 1f), new Vector3(1f, 1f))
.AddTriangle(zero, new Vector3(1f, 1f), right));
case 0b1000: return(builder.AddTriangle(up, new Vector3(0.5f, 1f), up * 0.5f));
case 0b1001:
return(builder.AddTriangle(zero, new Vector3(0.5f, 1f), new Vector3(0.5f, 0f))
.AddTriangle(zero, up, new Vector3(0.5f, 1f)));
case 0b1010:
return(builder.AddTriangle(new Vector3(0.5f, 0f), new Vector3(1f, 0.5f), right)
.AddTriangle(new Vector3(0f, 0.5f), up, new Vector3(0.5f, 1f)));
case 0b1011:
return(builder.AddTriangle(zero, up, right)
.AddTriangle(up, new Vector3(1f, 0.5f), right)
.AddTriangle(up, new Vector3(0.5f, 1f), new Vector3(1f, 0.5f)));
case 0b1100:
return(builder.AddTriangle(up, new Vector3(1f, 1f), new Vector3(0f, 0.5f))
.AddTriangle(new Vector3(0f, 0.5f), new Vector3(1f, 1f), new Vector3(1f, 0.5f)));
case 0b1101:
return(builder.AddTriangle(zero, up, new Vector3(1f, 1f))
.AddTriangle(zero, new Vector3(1f, 1f), new Vector3(1f, 0.5f))
.AddTriangle(zero, new Vector3(1f, 0.5f), new Vector3(0.5f, 0f)));
case 0b1110:
return(builder.AddTriangle(new Vector3(0f, 0.5f), right, new Vector3(0.5f, 0f))
.AddTriangle(new Vector3(0f, 0.5f), up, right)
.AddTriangle(up, new Vector3(1f, 1f), right));
case 0b1111:
return(builder.AddTriangle(zero, new Vector3(1f, 1f), right)
.AddTriangle(zero, up, new Vector3(1f, 1f)));
default: return(builder);
}
}
public void BuildLinkBezier(MeshBuilder meshBuilder, BezierCurve connectionBezier, float widthStart, float widthEnd, Color colorStart, Color colorEnd)
{
List <int> verticesList = new List <int>();
float m_splineStartRadius = widthStart;
float m_splineEndRadius = widthEnd;
int m_splineHeightSegmentCount = 8;
int m_splineRadialSegmentCount = 4;
float tInc = 1f / m_splineHeightSegmentCount; // How many subdivisions along the length of the spline
for (int i = 0; i <= m_splineHeightSegmentCount; i++)
{
float t = tInc * (float)i;
Vector3 ringCenter = connectionBezier.GetPoint(t);
//Quaternion rot = Quaternion.identity;
Vector3 dir = connectionBezier.GetDirection(t);
Quaternion rot = Quaternion.identity;
if (dir != Vector3.zero)
{
rot.SetLookRotation(dir);
}
float radius = ((1f - t) * m_splineStartRadius) + (t * m_splineEndRadius);
// Construct the mesh Ring!
//BuildBezierCurveRing(meshBuilder, m_splineRadialSegmentCount, ringCenter, radius, t, i > 0, rot);
//protected void BuildBezierCurveRing(MeshBuilder meshBuilder, int segmentCount, Vector3 center, float radius, float v, bool buildTriangles, Quaternion rotation) {
float angleInc = (Mathf.PI * 2.0f) / m_splineRadialSegmentCount;
for (int j = 0; j <= m_splineRadialSegmentCount; j++)
{
float angle = angleInc * j;
Vector3 unitPosition = Vector3.zero;
unitPosition.x = Mathf.Cos(angle);
unitPosition.y = Mathf.Sin(angle);
unitPosition = rot * unitPosition;
Vector3 normal = unitPosition;
meshBuilder.Vertices.Add(ringCenter + unitPosition * radius);
meshBuilder.Normals.Add(normal);
//meshBuilder.UVs.Add(new Vector2((float)i / segmentCount, v));
meshBuilder.UVs.Add(new Vector2((float)j / m_splineRadialSegmentCount, t));
verticesList.Add(meshBuilder.Vertices.Count - 1);
meshBuilder.Colors.Add(Color.Lerp(colorStart, colorEnd, t));
if (j > 0 && i > 0)
{
//Debug.Log ("buildTriangles!");
int baseIndex = meshBuilder.Vertices.Count - 1;
int vertsPerRow = m_splineRadialSegmentCount + 1;
int index0 = baseIndex;
int index1 = baseIndex - 1;
int index2 = baseIndex - vertsPerRow;
int index3 = baseIndex - vertsPerRow - 1;
meshBuilder.AddTriangle(index1, index2, index0);
meshBuilder.AddTriangle(index1, index3, index2);
}
}
}
connectionVertexList.Add(verticesList); // keep track of Connection's vertices so their color can be changed without rebuilding every frame
}
/// <summary>
/// To the helix mesh.
/// </summary>
/// <param name="mesh">The mesh.</param>
/// <returns></returns>
protected virtual MeshGeometry3D OnCreateHelixMesh(Mesh mesh)
{
var hVertices = new Vector3Collection(mesh.Vertices.Select(x => x.ToSharpDXVector3()));
var builder = new MeshBuilder(false, false);
builder.Positions.AddRange(hVertices);
for (var i = 0; i < mesh.FaceCount; ++i)
{
if (!mesh.Faces[i].HasIndices)
{
continue;
}
if (mesh.Faces[i].IndexCount == 3)
{
builder.AddTriangle(mesh.Faces[i].Indices);
}
else if (mesh.Faces[i].IndexCount == 4)
{
builder.AddTriangleFan(mesh.Faces[i].Indices);
}
}
var hMesh = new MeshGeometry3D {
Positions = hVertices, Indices = builder.TriangleIndices
};
if (mesh.HasNormals && mesh.Normals.Count == hMesh.Positions.Count)
{
hMesh.Normals = new Vector3Collection(mesh.Normals.Select(x => Vector3.Normalize(x.ToSharpDXVector3())));
}
else
{
hMesh.Normals = hMesh.CalculateNormals();
}
if (mesh.HasVertexColors(0))
{
hMesh.Colors =
new Color4Collection(mesh.VertexColorChannels[0].Select(x => new Color4(x.R, x.G, x.B, x.A)));
}
if (mesh.HasTextureCoords(0))
{
hMesh.TextureCoordinates =
new Vector2Collection(mesh.TextureCoordinateChannels[0].Select(x => x.ToSharpDXVector2()));
}
if (mesh.HasTangentBasis && mesh.Tangents.Count == hMesh.Positions.Count && mesh.BiTangents.Count == hMesh.Positions.Count)
{
hMesh.Tangents = new Vector3Collection(mesh.Tangents.Select(x => x.ToSharpDXVector3()));
hMesh.BiTangents = new Vector3Collection(mesh.BiTangents.Select(x => x.ToSharpDXVector3()));
}
else
{
builder.Normals = hMesh.Normals;
builder.TextureCoordinates = hMesh.TextureCoordinates;
builder.ComputeTangents(MeshFaces.Default);
hMesh.Tangents = builder.Tangents;
hMesh.BiTangents = builder.BiTangents;
}
hMesh.UpdateBounds();
if (configuration.BuildOctree)
{
hMesh.UpdateOctree();
}
return(hMesh);
}
/// <summary>
/// builds a wall with the normal pointing inwards if vertices are given clockwise
/// based off terrian of: http://jayelinda.com/wp/modelling-by-numbers-part-1a/
/// </summary>
public void BuildWall(MeshBuilder meshBuilder, IList<Vector2> vertices)
{
if (vertices == null || vertices.Count < 1)
return;
Vector2 vector2;
int segments = vertices.Count - 1;
for (int index = 0; index < vertices.Count; index++)
{
// Add vertex
vector2 = vertices[index];
bool isDistinctVertex = (vertices.IndexOf(vector2) == index);
if (isDistinctVertex) // add new vertex
{
meshBuilder.Vertices.Add(Vector2to3(vector2, -4));
meshBuilder.Vertices.Add(Vector2to3(vector2, 4));
Vector2 lipPoint = getWallLipAt(vertices, index);
meshBuilder.Vertices.Add(Vector2to3(lipPoint, -4));
}
else // make use of existing vertex.
{
if (existingVertexIndex != -1)
Debug.Log("BuildWall is reusing too many vertices");
existingVertexIndex = vertices.IndexOf(vector2)
* 3 // because there are 3 vertices added per vector2 (z of 4, 4 & -4)
+ 1; // use the non-lip z of 4 vertex
}
//init UV map with values for index == 0
Vector2 uvFront = new Vector2(0, 0),
uvBack = new Vector2(0, 1);
//connect with previous vertice
if (index > 0)
{
uvFront.x = uvBack.x = (1.0f / segments) * index;
int[] indices = wallSegmentIndices(isDistinctVertex, meshBuilder.Vertices.Count);
if (indices == null)
continue; //skip adding triangles for this vertex iteration
// 0-1-4 vertex index layout
// | | |
// 2-3-5
int index0 = indices[0],
index1 = indices[1],
index2 = indices[2],
index3 = indices[3],
lip4 = indices[4],
lip5 = indices[5];
meshBuilder.AddTriangle(index0, index2, index1);
meshBuilder.AddTriangle(index2, index3, index1);
//create lip on positive z-index
// meshBuilder.AddTriangle(lip4, lip5, index0);
// meshBuilder.AddTriangle(lip5, index2, index0);
//create lip on negative z-index
meshBuilder.AddTriangle(index1, index3, lip4);
meshBuilder.AddTriangle(index3, lip5, lip4);
}
meshBuilder.UVs.Add(uvFront);
meshBuilder.UVs.Add(uvBack);
}
}
void AddFakeVariablesDebug()
{
dg_Variables.BeginningEdit -= dg_Variables_BeginningEdit;
dg_Variables.BeginningEdit += dg_Variables_BeginningEdit_DEBUG;
// datagrid objs
DataGridObject obj = new DataGridObject()
{
Name = "Points"
};
DataGridObject sphere = new DataGridObject()
{
Name = "Sphere"
};
DataGridObject mesh = new DataGridObject()
{
Name = "Mesh"
};
DataGridObject line = new DataGridObject()
{
Name = "Line"
};
List <DataGridObject> objs = new List <DataGridObject>()
{
obj, sphere, line, mesh
};
dg_Variables.ItemsSource = objs;
// pnts
PointsVisual3D points = new PointsVisual3D();
Random rand = new Random();
for (int i = 0; i < 10; i++)
{
Point3D p = new Point3D(rand.NextDouble(), rand.NextDouble(), rand.NextDouble());
points.Points.Add(p);
}
points.Size = PropertyServer.PointSize;
_dict.Add("Points", points);
hv.Items.Add(points);
// sphere
SphereVisual3D sph = new SphereVisual3D()
{
Center = new Point3D(0, 0, 0),
Radius = 0.1,
};
_dict.Add("Sphere", sph);
hv.Items.Add(sph);
// mesh
MeshBuilder builder = new MeshBuilder(true, true);
builder.AddTriangle(new Point3D(1, 1, 1), new Point3D(2, 2, 4), new Point3D(5, 3, 3));
MeshVisual3D m = new MeshVisual3D()
{
Mesh = new Mesh3D(builder.Positions, Enumerable.Range(0, builder.Positions.Count))
};
_dict.Add("Mesh", m);
hv.Items.Add(m);
// line
LinesVisual3D l = new LinesVisual3D();
l.Points.Add(new Point3D(4, 5, 7));
l.Points.Add(new Point3D(4, 8, 5));
_dict.Add("Line", l);
hv.Items.Add(l);
}
void AddDodecahedronFace(MeshBuilder meshBuilder, int v1, int v2, int v3, int v4, int v5)
{
meshBuilder.AddTriangle(v1, v4, v5);
meshBuilder.AddTriangle(v2, v4, v1);
meshBuilder.AddTriangle(v3, v4, v2);
}
private void GenerateWayMesh(IList<MapWay> wayList)
{
IList<Color32> colours = new List<Color32> ();
//Create MeshBuilder
MeshBuilder meshBuilder = new MeshBuilder();
int currentTriangleCount = 0;
foreach (MapWay mapway in wayList) {
if (OnlyDrawHighways){
if (!mapway._tags.ContainsKey("highway")){
continue;
}
}
MapNode to = null;
MapNode from = null;
//Color randomCol = new Color (Random.Range (0.00f, 1.00f),Random.Range (0.00f, 1.00f),Random.Range (0.00f, 1.00f));
for (int i=0; i < mapway._nodesInWay.Count; i++){
//Get nodes
to = _mapController.GetMapNodeById(mapway._nodesInWay[i]._id);
if (to == null){
continue;
}
if (from == null){
from = to;
continue;
}
//Debug.DrawLine(from.LocationInUnits, to.LocationInUnits, randomCol, 2000, false);
//Draw Mesh
Vector3 newVec = to.LocationInUnits - from.LocationInUnits;
Vector3 newVector = Vector3.Cross (newVec, Vector3.down);
newVector.Normalize ();
Vector3 c = RoadWidth * newVector + to.LocationInUnits;
Vector3 d = -RoadWidth * newVector + to.LocationInUnits;
Vector3 e = RoadWidth * newVector + from.LocationInUnits;
Vector3 f = -RoadWidth * newVector + from.LocationInUnits;
//MeshBuilder from http://jayelinda.com/
meshBuilder.Vertices.Add(e);
meshBuilder.UVs.Add(new Vector2(0.0f, 0.0f));
meshBuilder.Normals.Add(Vector3.up);
meshBuilder.Vertices.Add(f);
meshBuilder.UVs.Add(new Vector2(1.0f, 0.0f));
meshBuilder.Normals.Add(Vector3.up);
meshBuilder.Vertices.Add(d);
meshBuilder.UVs.Add(new Vector2(1.0f, 1.0f));
meshBuilder.Normals.Add(Vector3.up);
meshBuilder.Vertices.Add(c);
meshBuilder.UVs.Add(new Vector2(0.0f, 1.0f));
meshBuilder.Normals.Add(Vector3.up);
//Don't edit colours here- do it in the GenerateMeshColours function below!
byte needColor;
Color32 vertexColor;
if (NeedToColour == Needs.Food)
{
needColor = (byte)((from.NeedAmounts[Needs.Food] + from.NearbyNeedAmounts[Needs.Food]) * 255);
vertexColor = new Color32(needColor, 0, 0, 255);
} else
{
needColor = (byte)((from.NeedAmounts[Needs.Water] + from.NearbyNeedAmounts[Needs.Water]) * 255);
vertexColor = new Color32(0, 0, needColor, 255);
}
colours.Add (vertexColor);
colours.Add (vertexColor);
//Other side
if (NeedToColour == Needs.Food)
{
needColor = (byte)((to.NeedAmounts[Needs.Food] + to.NearbyNeedAmounts[Needs.Food]) * 255);
vertexColor = new Color32(needColor, 0, 0, 255);
}
else
{
needColor = (byte)((to.NeedAmounts[Needs.Water] + to.NearbyNeedAmounts[Needs.Water]) * 255);
vertexColor = new Color32(0, 0, needColor, 255);
}
colours.Add (vertexColor);
colours.Add (vertexColor);
//Add the triangles:
meshBuilder.AddTriangle(currentTriangleCount, currentTriangleCount+1, currentTriangleCount+2);
meshBuilder.AddTriangle(currentTriangleCount, currentTriangleCount+2, currentTriangleCount+3);
currentTriangleCount+=4;
from = to;
}
}
//Create the mesh:
Mesh mesh = meshBuilder.CreateMesh();
_wayMesh = mesh;
_wayColours = colours;
GenerateNeedMeshColours (wayList);
}
public void BuildNodeSphere(MeshBuilder meshBuilder, Vector3 offset, float m_Radius, Color color)
{
List <int> verticesList = new List <int>();
int m_HeightSegmentCount = 4;
int m_RadialSegmentCount = 4;
//float m_Radius = 1f;
float m_VerticalScale = 1f;
Quaternion rotation = Quaternion.identity;
//the angle increment per height segment:
float angleInc = Mathf.PI / m_HeightSegmentCount;
//the vertical (scaled) radius of the sphere:
float verticalRadius = m_Radius * m_VerticalScale;
//build the rings:
for (int i = 0; i <= m_HeightSegmentCount; i++)
{
Vector3 centrePos = Vector3.zero;
//calculate a height offset and radius based on a vertical circle calculation:
centrePos.y = -Mathf.Cos(angleInc * i);
float radius = Mathf.Sin(angleInc * i);
//calculate the slope of the shpere at this ring based on the height and radius:
Vector2 slope = new Vector3(-centrePos.y / m_VerticalScale, radius);
slope.Normalize();
//multiply the unit height by the vertical radius, and then add the radius to the height to make this sphere originate from its base rather than its centre:
centrePos.y = centrePos.y * verticalRadius + verticalRadius;
//scale the radius by the one stored in the partData:
radius *= m_Radius;
//calculate the final position of the ring centre:
Vector3 finalRingCentre = rotation * centrePos + offset;
//V coordinate:
float v = (float)i / m_HeightSegmentCount;
//build the ring:
//BuildRing(meshBuilder, m_RadialSegmentCount, finalRingCentre, radius, v, i > 0, rotation, slope);
float angleIncrement = (Mathf.PI * 2.0f) / m_RadialSegmentCount;
for (int j = 0; j <= m_RadialSegmentCount; j++)
{
float angle = angleIncrement * j;
Vector3 unitPosition = Vector3.zero;
unitPosition.x = Mathf.Cos(angle);
unitPosition.z = Mathf.Sin(angle);
float normalVertical = -slope.x;
float normalHorizontal = slope.y;
Vector3 normal = unitPosition * normalHorizontal;
normal.y = normalVertical;
normal = rotation * normal;
unitPosition = rotation * unitPosition;
meshBuilder.Vertices.Add(finalRingCentre + unitPosition * radius);
meshBuilder.Normals.Add(normal);
meshBuilder.UVs.Add(new Vector2((float)j / m_RadialSegmentCount, v));
verticesList.Add(meshBuilder.Vertices.Count - 1);
meshBuilder.Colors.Add(color);
if (j > 0 && i > 0)
{
int baseIndex = meshBuilder.Vertices.Count - 1;
int vertsPerRow = m_RadialSegmentCount + 1;
int index0 = baseIndex;
int index1 = baseIndex - 1;
int index2 = baseIndex - vertsPerRow;
int index3 = baseIndex - vertsPerRow - 1;
meshBuilder.AddTriangle(index0, index2, index1);
meshBuilder.AddTriangle(index2, index3, index1);
}
}
}
nodeVertexList.Add(verticesList); // keep track of Node's vertices so their color can be changed without rebuilding every frame
}
public void BuildLink(MeshBuilder meshBuilder, Vector3 fromPos, Vector3 toPos, float width, Color color) {
List<int> verticesList = new List<int>();
Vector3 normal = new Vector3(0f, 0f, 1f); // Vector3.Cross(lengthDir, widthDir).normalized;
Vector3 linkVector = new Vector3(toPos.x - fromPos.x, toPos.y - fromPos.y, toPos.z - fromPos.z);
Vector3 widthVector = new Vector3(new Vector2(linkVector.y, -linkVector.x).normalized.x, new Vector2(linkVector.y, -linkVector.x).normalized.y, 0f) * width;
Vector3 cornerPos = new Vector3(fromPos.x - widthVector.x * 0.5f, fromPos.y - widthVector.y * 0.5f, -0.01f);
//Vector3 offset = new Vector3(cornerPos.x, cornerPos.y, 0f);
meshBuilder.Vertices.Add(cornerPos);
meshBuilder.UVs.Add(new Vector2(0.0f, 0.0f));
meshBuilder.Normals.Add(normal);
verticesList.Add(meshBuilder.Vertices.Count - 1);
meshBuilder.Colors.Add(color);
meshBuilder.Vertices.Add(cornerPos + linkVector);
meshBuilder.UVs.Add(new Vector2(0.0f, 1.0f));
meshBuilder.Normals.Add(normal);
verticesList.Add(meshBuilder.Vertices.Count - 1);
meshBuilder.Colors.Add(color);
meshBuilder.Vertices.Add(cornerPos + linkVector + widthVector);
meshBuilder.UVs.Add(new Vector2(1.0f, 1.0f));
meshBuilder.Normals.Add(normal);
verticesList.Add(meshBuilder.Vertices.Count - 1);
meshBuilder.Colors.Add(color);
meshBuilder.Vertices.Add(cornerPos + widthVector);
meshBuilder.UVs.Add(new Vector2(1.0f, 0.0f));
meshBuilder.Normals.Add(normal);
verticesList.Add(meshBuilder.Vertices.Count - 1);
meshBuilder.Colors.Add(color);
connectionVertexList.Add(verticesList); // keep track of Connection's vertices so their color can be changed without rebuilding every frame
//we don't know how many verts the meshBuilder is up to, but we only care about the four we just added:
int baseIndex = meshBuilder.Vertices.Count - 4;
meshBuilder.AddTriangle(baseIndex, baseIndex + 1, baseIndex + 2);
meshBuilder.AddTriangle(baseIndex, baseIndex + 2, baseIndex + 3);
}
private void CreateModel()
{
var points = new Point3DCollection();
var edges = new Int32Collection();
var triangles = new Int32Collection();
switch (CurrentModelType)
{
case ModelTypes.StellatedOctahedron:
case ModelTypes.Tetrahedron:
points.Add(+1, +1, +1);
points.Add(-1, -1, 1);
points.Add(-1, +1, -1);
points.Add(+1, -1, -1);
edges.Add(0, 1, 1, 2, 2, 0, 0, 3, 1, 3, 2, 3);
triangles.Add(0, 1, 2, 0, 3, 1, 1, 3, 2, 2, 3, 0);
break;
}
switch (CurrentModelType)
{
case ModelTypes.StellatedOctahedron:
// http://en.wikipedia.org/wiki/Compound_of_two_tetrahedra
points.Add(-1, +1, +1);
points.Add(1, -1, 1);
points.Add(1, +1, -1);
points.Add(-1, -1, -1);
edges.Add(4, 5, 5, 6, 6, 4, 4, 7, 5, 7, 6, 7);
triangles.Add(4, 5, 6, 4, 7, 5, 5, 7, 6, 6, 7, 4);
break;
}
var m = new Model3DGroup();
// Add the nodes
var gm = new MeshBuilder();
foreach (var p in points)
{
gm.AddSphere(p, 0.1);
}
m.Children.Add(new GeometryModel3D(gm.ToMesh(), Materials.Gold));
// Add the triangles
var tm = new MeshBuilder();
for (int i = 0; i < triangles.Count; i += 3)
{
tm.AddTriangle(points[triangles[i]], points[triangles[i + 1]], points[triangles[i + 2]]);
}
m.Children.Add(new GeometryModel3D(tm.ToMesh(), Materials.Red)
{
BackMaterial = Materials.Blue
});
// Add the edges
var em = new MeshBuilder();
for (int i = 0; i < edges.Count; i += 2)
{
em.AddCylinder(points[edges[i]], points[edges[i + 1]], 0.08, 10);
}
m.Children.Add(new GeometryModel3D(em.ToMesh(), Materials.Gray));
Model = m;
}
public void BuildNode(MeshBuilder meshBuilder, Vector3 offset, Vector3 widthDir, Vector3 lengthDir, Color color) {
List<int> verticesList = new List<int>();
Vector3 normal = Vector3.Cross(lengthDir, widthDir).normalized;
//Color red = new Color(1f, 0f, 0f, 1f);
meshBuilder.Vertices.Add(offset);
meshBuilder.UVs.Add(new Vector2(0.0f, 0.0f));
meshBuilder.Normals.Add(normal);
verticesList.Add(meshBuilder.Vertices.Count - 1);
meshBuilder.Colors.Add(color);
meshBuilder.Vertices.Add(offset + lengthDir);
meshBuilder.UVs.Add(new Vector2(0.0f, 1.0f));
meshBuilder.Normals.Add(normal);
verticesList.Add(meshBuilder.Vertices.Count - 1);
meshBuilder.Colors.Add(color);
meshBuilder.Vertices.Add(offset + lengthDir + widthDir);
meshBuilder.UVs.Add(new Vector2(1.0f, 1.0f));
meshBuilder.Normals.Add(normal);
verticesList.Add(meshBuilder.Vertices.Count - 1);
meshBuilder.Colors.Add(color);
meshBuilder.Vertices.Add(offset + widthDir);
meshBuilder.UVs.Add(new Vector2(1.0f, 0.0f));
meshBuilder.Normals.Add(normal);
verticesList.Add(meshBuilder.Vertices.Count - 1);
meshBuilder.Colors.Add(color);
nodeVertexList.Add(verticesList); // keep track of Node's vertices so their color can be changed without rebuilding every frame
//we don't know how many verts the meshBuilder is up to, but we only care about the four we just added:
int baseIndex = meshBuilder.Vertices.Count - 4;
meshBuilder.AddTriangle(baseIndex, baseIndex + 1, baseIndex + 2);
meshBuilder.AddTriangle(baseIndex, baseIndex + 2, baseIndex + 3);
}
private static MeshGeometry3D MeshFromTriangle(Point3D p1, Point3D p2, Point3D p3)
{
var mb = new MeshBuilder(false, false);
mb.AddTriangle(p1, p2, p3);
return mb.ToMesh();
}
void AddDodecahedronFace(MeshBuilder meshBuilder, int v1, int v2, int v3, int v4, int v5)
{
meshBuilder.AddTriangle(v1, v4, v5);
meshBuilder.AddTriangle(v2, v4, v1);
meshBuilder.AddTriangle(v3, v4, v2);
}
public void RenderMesh(WLD wld,IEnumerable<Mesh> meshes, TrackAnimationBuilder animation = null, int textureNum = 0, int face = 0)
{
if (meshes == null) return;
Model3DGroup group = Model as Model3DGroup;
group.Children.Clear();
Dictionary<BitmapImage, List<EQEmu.Files.WLD.Polygon>> polysbyTex = new Dictionary<BitmapImage, List<EQEmu.Files.WLD.Polygon>>();
List<EQEmu.Files.WLD.Polygon> untexturedPolys = new List<EQEmu.Files.WLD.Polygon>();
foreach (var mesh in meshes)
{
foreach (var p in mesh.Polygons)
{
if (p.BitmapInfo != null)
{
if (polysbyTex.ContainsKey(p.BitmapInfo.Image))
{
polysbyTex[p.BitmapInfo.Image].Add(p);
}
else
{
polysbyTex[p.BitmapInfo.Image] = new List<EQEmu.Files.WLD.Polygon>();
polysbyTex[p.BitmapInfo.Image].Add(p);
}
}
else
{
untexturedPolys.Add(p);
}
}
}
Material mat = null;
foreach (var polytex in polysbyTex)
{
MeshBuilder builder = new MeshBuilder();
if (mat == null)
{
if (polytex.Value.ElementAt(0).BitmapInfo != null)
{
//mat = HelixToolkit.Wpf.MaterialHelper.CreateImageMaterial(polytex.Value.ElementAt(0).Image, 100.0);
BitmapImage img = polytex.Value.ElementAt(0).BitmapInfo.Image;
if (textureNum > 0 || face > 0)
{
string baseTexture = polytex.Value.ElementAt(0).BitmapInfo.Name;
var textureStr = String.Format("{0:d2}", textureNum);
var faceStr = String.Format("{0:d1}", face);
var index = baseTexture.IndexOf("00");
if (index < 0) index = baseTexture.IndexOf("01");
if (index > 0)
{
var faceAndTexture = baseTexture.Substring(0, index) + textureStr + faceStr + baseTexture.Substring(index + textureStr.Length + faceStr.Length);
var textureOnly = baseTexture.Substring(0, index) + textureStr + baseTexture.Substring(index + textureStr.Length);
var faceOnly = baseTexture.Substring(0, index + textureStr.Length) + faceStr + baseTexture.Substring(index + textureStr.Length + faceStr.Length);
if (wld.ImageMapping.ContainsKey(faceAndTexture))
{
img = wld.ImageMapping[faceAndTexture].Image;
}
else if (wld.ImageMapping.ContainsKey(textureOnly))
{
img = wld.ImageMapping[textureOnly].Image;
}
else if (wld.ImageMapping.ContainsKey(faceOnly))
{
img = wld.ImageMapping[faceOnly].Image;
}
}
}
var brush = new System.Windows.Media.ImageBrush(img);
brush.ViewportUnits = System.Windows.Media.BrushMappingMode.Absolute;
//brush.TileMode
brush.TileMode = System.Windows.Media.TileMode.Tile;
//brush.Stretch = System.Windows.Media.Stretch.Fill;
mat = HelixToolkit.Wpf.MaterialHelper.CreateMaterial(brush);
}
else
{
mat = Materials.LightGray;
}
}
foreach (var poly in polytex.Value)
{
Point3D p1 = new Point3D(poly.V1.X, poly.V1.Y, poly.V1.Z);
Point3D p2 = new Point3D(poly.V2.X, poly.V2.Y, poly.V2.Z);
Point3D p3 = new Point3D(poly.V3.X, poly.V3.Y, poly.V3.Z);
if (animation != null)
{
if (animation.SkeletonPieceTransforms.ContainsKey(poly.V1.BodyPiece))
{
var atrans = animation.SkeletonPieceTransforms[poly.V1.BodyPiece];
p1 = atrans.Transform(p1);
}
if (animation.SkeletonPieceTransforms.ContainsKey(poly.V2.BodyPiece))
{
var atrans = animation.SkeletonPieceTransforms[poly.V2.BodyPiece];
p2 = atrans.Transform(p2);
}
if (animation.SkeletonPieceTransforms.ContainsKey(poly.V3.BodyPiece))
{
var atrans = animation.SkeletonPieceTransforms[poly.V3.BodyPiece];
p3 = atrans.Transform(p3);
}
}
var rotate = new RotateTransform3D();
rotate.Rotation = new AxisAngleRotation3D(new Vector3D(0, 0, 1), 90);
p1 = rotate.Transform(p1);
p2 = rotate.Transform(p2);
p3 = rotate.Transform(p3);
if (!Clipping.DrawPoint(p1) || !Clipping.DrawPoint(p2) || !Clipping.DrawPoint(p3))
{
continue;
}
//v coordinate - negate it to convert from opengl coordinates to directx
var t1 = new System.Windows.Point(poly.V1.U, 1 - poly.V1.V);
var t2 = new System.Windows.Point(poly.V2.U, 1 - poly.V2.V);
var t3 = new System.Windows.Point(poly.V3.U, 1 - poly.V3.V);
//var t1 = new System.Windows.Point(0.0, 0.0);
//var t2 = new System.Windows.Point(2.0, 0.0);
//var t3 = new System.Windows.Point(0.0, 2.0);
//builder.AddTriangle(p3, p2, p1, t3, t2, t1);
builder.AddTriangle(p3, p2, p1, t3, t2, t1);
}
group.Children.Add(new GeometryModel3D(builder.ToMesh(), mat));
mat = null;
}
//create the untextured polygons... basically a copy and paste from above which sucks... TODO
var bbuilder = new MeshBuilder();
mat = Materials.LightGray;
foreach (var poly in untexturedPolys)
{
Point3D p1 = new Point3D(poly.V1.X, poly.V1.Y, poly.V1.Z);
Point3D p2 = new Point3D(poly.V2.X, poly.V2.Y, poly.V2.Z);
Point3D p3 = new Point3D(poly.V3.X, poly.V3.Y, poly.V3.Z);
var rotate = new RotateTransform3D();
rotate.Rotation = new AxisAngleRotation3D(new Vector3D(0, 0, 1), 90);
p1 = rotate.Transform(p1);
p2 = rotate.Transform(p2);
p3 = rotate.Transform(p3);
if (!Clipping.DrawPoint(p1) || !Clipping.DrawPoint(p2) || !Clipping.DrawPoint(p3))
{
continue;
}
bbuilder.AddTriangle(p3, p2, p1);
}
group.Children.Add(new GeometryModel3D(bbuilder.ToMesh(), mat));
}
/// <summary>
/// Builds a single triangle.
/// </summary>
/// <param name="meshBuilder">The mesh builder currently being added to.</param>
/// <param name="corner0">The vertex position at index 0 of the triangle.</param>
/// <param name="corner1">The vertex position at index 1 of the triangle.</param>
/// <param name="corner2">The vertex position at index 2 of the triangle.</param>
public static void BuildTriangle(MeshBuilder meshBuilder, Vector3 corner0, Vector3 corner1, Vector3 corner2) {
Vector3 normal = Vector3.Cross((corner1 - corner0), (corner2 - corner0)).normalized;
meshBuilder.Vertices.Add(corner0);
meshBuilder.UVs.Add(new Vector2(0.0f, 0.0f));
meshBuilder.Normals.Add(normal);
meshBuilder.Vertices.Add(corner1);
meshBuilder.UVs.Add(new Vector2(0.0f, 1.0f));
meshBuilder.Normals.Add(normal);
meshBuilder.Vertices.Add(corner2);
meshBuilder.UVs.Add(new Vector2(1.0f, 1.0f));
meshBuilder.Normals.Add(normal);
int baseIndex = meshBuilder.Vertices.Count - 3;
meshBuilder.AddTriangle(baseIndex, baseIndex + 1, baseIndex + 2);
}
public void BuildLinkBezier(MeshBuilder meshBuilder, BezierCurve connectionBezier, float widthStart, float widthEnd, Color colorStart, Color colorEnd) {
List<int> verticesList = new List<int>();
float m_splineStartRadius = widthStart;
float m_splineEndRadius = widthEnd;
int m_splineHeightSegmentCount = 8;
int m_splineRadialSegmentCount = 4;
float tInc = 1f / m_splineHeightSegmentCount; // How many subdivisions along the length of the spline
for (int i = 0; i <= m_splineHeightSegmentCount; i++) {
float t = tInc * (float)i;
Vector3 ringCenter = connectionBezier.GetPoint(t);
//Quaternion rot = Quaternion.identity;
Vector3 dir = connectionBezier.GetDirection(t);
Quaternion rot = Quaternion.identity;
if (dir != Vector3.zero) {
rot.SetLookRotation(dir);
}
float radius = ((1f - t) * m_splineStartRadius) + (t * m_splineEndRadius);
// Construct the mesh Ring!
//BuildBezierCurveRing(meshBuilder, m_splineRadialSegmentCount, ringCenter, radius, t, i > 0, rot);
//protected void BuildBezierCurveRing(MeshBuilder meshBuilder, int segmentCount, Vector3 center, float radius, float v, bool buildTriangles, Quaternion rotation) {
float angleInc = (Mathf.PI * 2.0f) / m_splineRadialSegmentCount;
for (int j = 0; j <= m_splineRadialSegmentCount; j++) {
float angle = angleInc * j;
Vector3 unitPosition = Vector3.zero;
unitPosition.x = Mathf.Cos(angle);
unitPosition.y = Mathf.Sin(angle);
unitPosition = rot * unitPosition;
Vector3 normal = unitPosition;
meshBuilder.Vertices.Add(ringCenter + unitPosition * radius);
meshBuilder.Normals.Add(normal);
//meshBuilder.UVs.Add(new Vector2((float)i / segmentCount, v));
meshBuilder.UVs.Add(new Vector2((float)j / m_splineRadialSegmentCount, t));
verticesList.Add(meshBuilder.Vertices.Count - 1);
meshBuilder.Colors.Add(Color.Lerp(colorStart, colorEnd, t));
if (j > 0 && i > 0) {
//Debug.Log ("buildTriangles!");
int baseIndex = meshBuilder.Vertices.Count - 1;
int vertsPerRow = m_splineRadialSegmentCount + 1;
int index0 = baseIndex;
int index1 = baseIndex - 1;
int index2 = baseIndex - vertsPerRow;
int index3 = baseIndex - vertsPerRow - 1;
meshBuilder.AddTriangle(index1, index2, index0);
meshBuilder.AddTriangle(index1, index3, index2);
}
}
}
connectionVertexList.Add(verticesList); // keep track of Connection's vertices so their color can be changed without rebuilding every frame
}
void AddInternalCubeFace(MeshBuilder meshBuilder, int v1, int v2, int v3, int v4)
{
meshBuilder.AddTriangle(v4, v3, v1);
meshBuilder.AddTriangle(v3, v2, v1);
}
public void BuildNodeSphere(MeshBuilder meshBuilder, Vector3 offset, float m_Radius, Color color) {
List<int> verticesList = new List<int>();
int m_HeightSegmentCount = 4;
int m_RadialSegmentCount = 4;
//float m_Radius = 1f;
float m_VerticalScale = 1f;
Quaternion rotation = Quaternion.identity;
//the angle increment per height segment:
float angleInc = Mathf.PI / m_HeightSegmentCount;
//the vertical (scaled) radius of the sphere:
float verticalRadius = m_Radius * m_VerticalScale;
//build the rings:
for (int i = 0; i <= m_HeightSegmentCount; i++) {
Vector3 centrePos = Vector3.zero;
//calculate a height offset and radius based on a vertical circle calculation:
centrePos.y = -Mathf.Cos(angleInc * i);
float radius = Mathf.Sin(angleInc * i);
//calculate the slope of the shpere at this ring based on the height and radius:
Vector2 slope = new Vector3(-centrePos.y / m_VerticalScale, radius);
slope.Normalize();
//multiply the unit height by the vertical radius, and then add the radius to the height to make this sphere originate from its base rather than its centre:
centrePos.y = centrePos.y * verticalRadius + verticalRadius;
//scale the radius by the one stored in the partData:
radius *= m_Radius;
//calculate the final position of the ring centre:
Vector3 finalRingCentre = rotation * centrePos + offset;
//V coordinate:
float v = (float)i / m_HeightSegmentCount;
//build the ring:
//BuildRing(meshBuilder, m_RadialSegmentCount, finalRingCentre, radius, v, i > 0, rotation, slope);
float angleIncrement = (Mathf.PI * 2.0f) / m_RadialSegmentCount;
for (int j = 0; j <= m_RadialSegmentCount; j++) {
float angle = angleIncrement * j;
Vector3 unitPosition = Vector3.zero;
unitPosition.x = Mathf.Cos(angle);
unitPosition.z = Mathf.Sin(angle);
float normalVertical = -slope.x;
float normalHorizontal = slope.y;
Vector3 normal = unitPosition * normalHorizontal;
normal.y = normalVertical;
normal = rotation * normal;
unitPosition = rotation * unitPosition;
meshBuilder.Vertices.Add(finalRingCentre + unitPosition * radius);
meshBuilder.Normals.Add(normal);
meshBuilder.UVs.Add(new Vector2((float)j / m_RadialSegmentCount, v));
verticesList.Add(meshBuilder.Vertices.Count - 1);
meshBuilder.Colors.Add(color);
if (j > 0 && i > 0) {
int baseIndex = meshBuilder.Vertices.Count - 1;
int vertsPerRow = m_RadialSegmentCount + 1;
int index0 = baseIndex;
int index1 = baseIndex - 1;
int index2 = baseIndex - vertsPerRow;
int index3 = baseIndex - vertsPerRow - 1;
meshBuilder.AddTriangle(index0, index2, index1);
meshBuilder.AddTriangle(index2, index3, index1);
}
}
}
nodeVertexList.Add(verticesList); // keep track of Node's vertices so their color can be changed without rebuilding every frame
}
/// <summary>
/// Builds a ring as part of a cylinder.
/// </summary>
/// <param name="meshBuilder">The mesh builder currently being added to.</param>
/// <param name="segmentCount">The number of segments in this ring.</param>
/// <param name="centre">The position at the centre of the ring.</param>
/// <param name="radius">The radius of the ring.</param>
/// <param name="v">The V coordinate for this ring.</param>
/// <param name="buildTriangles">Should triangles be built for this ring? This value should be false if this is the first ring in the cylinder.</param>
/// <param name="rotation">A rotation value to be applied to the whole ring.</param>
/// <param name="slope">The normalised slope (rise and run) of the cylinder at this height.</param>
public static void BuildRingZ(MeshBuilder meshBuilder, int segmentCount, Vector3 centre, float radius, float v, bool buildTriangles, Quaternion rotation, Vector2 slope) {
float angleInc = (Mathf.PI * 2.0f) / segmentCount;
for (int i = 0; i <= segmentCount; i++) {
float angle = angleInc * i;
Vector3 unitPosition = Vector3.zero;
unitPosition.x = Mathf.Cos(angle);
unitPosition.y = Mathf.Sin(angle);
float normalVertical = -slope.x;
float normalHorizontal = slope.y;
Vector3 normal = unitPosition * normalHorizontal;
normal.z = normalVertical;
normal = rotation * normal;
unitPosition = rotation * unitPosition;
meshBuilder.Vertices.Add(centre + unitPosition * radius);
meshBuilder.Normals.Add(normal);
meshBuilder.UVs.Add(new Vector2((float)i / segmentCount, v));
if (i > 0 && buildTriangles) {
int baseIndex = meshBuilder.Vertices.Count - 1;
int vertsPerRow = segmentCount + 1;
int index0 = baseIndex;
int index1 = baseIndex - 1;
int index2 = baseIndex - vertsPerRow;
int index3 = baseIndex - vertsPerRow - 1;
meshBuilder.AddTriangle(index0, index2, index1);
meshBuilder.AddTriangle(index2, index3, index1);
}
}
}
public MeshBuilder Create(MeshBuilder mb1, MeshBuilder mb2, bool round = true)
{
MeshBuilder meshBuilder = new MeshBuilder();
float segmentSize = size / totalSegments;
if (mb1.GetVertices("border").Count == mb2.GetVertices("border").Count)
{
Debug.Log("GilLog - MeshUnion::Create - round " + round + " 1 ");
int totalVertices = mb1.GetVertices("border").Count;
Debug.Log("GilLog - MeshUnion::Create - mb1 " + mb1 + " mb2 " + mb2 + " round " + round + " - totalVertices " + totalVertices + " - segmentSize " + segmentSize + " ");
for (int i = 0; i < totalVertices; i++)
{
// Debug.Log("GilLog - MeshUnion::Create - mb1 " + mb1 + " mb2 " + mb2 + " round " + round + " - mb1.GetVertices(border)[i] " + mb1.GetVertices("border")[i] + " - mb2.GetVertices(border)[i] " + mb2.GetVertices("border")[i] + " ");
Vector3 diffVector = (mb1.GetVertices("border")[i] - mb2.GetVertices("border")[i]).normalized;
for (int s = 0; s < totalSegments; s++)
{
meshBuilder.AddVertice(
mb1.GetVertices("border")[i] + s * segmentSize * diffVector
);
if (i < totalVertices - 1 || round)
{
int nextIndex = (i + 1) % totalVertices;
meshBuilder.AddTriangle(
i * (totalSegments + 1) + s,
i * (totalSegments + 1) + s + 1,
nextIndex * (totalSegments + 1) + s
);
meshBuilder.AddTriangle(
i * (totalSegments + 1) + s + 1,
nextIndex * (totalSegments + 1) + s + 1,
nextIndex * (totalSegments + 1) + s
);
}
}
meshBuilder.AddVertice(mb2.GetVertices("border")[i]);
}
}
else
{
MeshBuilder tmp = null;
if (mb1.GetVertices("border").Count > mb2.GetVertices("border").Count)
{
tmp = mb1;
mb1 = mb2;
mb2 = tmp;
}
int totalVertices1 = mb1.GetVertices("border").Count;
int totalVertices2 = mb2.GetVertices("border").Count;
int vertices2ForEachV1 = totalVertices2 / totalVertices1;
int currentVertice2 = 0;
int v1Index = 0;
for (int i = 0; i < totalVertices1; i++)
{
v1Index = meshBuilder.Vertices.Count;
meshBuilder.AddVertice(
mb1.GetVertices("border")[i]
);
for (int v2 = currentVertice2; (i == totalVertices1 - 1 && v2 < totalVertices2) || v2 < currentVertice2 + vertices2ForEachV1; v2++)
{
Debug.Log("GilLog - MeshUnion::Create - mb1 " + mb1 + " mb2 " + mb2 + " round " + round + " - v2 " + v2 + " ");
Vector3 diffVector = (mb1.GetVertices("border")[i] - mb2.GetVertices("border")[v2]).normalized;
for (int s = 0; s < totalSegments; s++)
{
if (s > 0)
{
meshBuilder.AddVertice(
mb1.GetVertices("border")[i] + s * segmentSize * diffVector
);
}
if (v2 < totalVertices2 - 1 || round)
{
int nextIndex = (v2 + 1) % totalVertices2;
meshBuilder.AddTriangle(
v1Index,
v1Index + v2 * totalSegments + s + 1,
v1Index + v2 * totalSegments + s + 2
);
}
}
meshBuilder.AddVertice(mb2.GetVertices("border")[v2]);
}
currentVertice2 = currentVertice2 + vertices2ForEachV1;
}
}
return(meshBuilder);
}
void AddInternalCubeFace(MeshBuilder meshBuilder, int v1, int v2, int v3, int v4)
{
meshBuilder.AddTriangle(v4, v3, v1);
meshBuilder.AddTriangle(v3, v2, v1);
}