private static bool DrawByMarkerWithOffset(IDocument doc, IRtc rtc, ILaser laser)
{
var marker = new MarkerDefault(0);
marker.Name = "marker #2";
//가공 완료 이벤트 핸들러 등록
marker.OnFinished += Marker_OnFinished;
var markerArg = new MarkerArgDefault()
{
Document = doc,
Rtc = rtc,
Laser = laser,
};
// 9개의 오프셋 정보를 추가한다
markerArg.Offsets.Clear();
markerArg.Offsets.Add(new Offset(-20.0f, 20.0f, -90f));
markerArg.Offsets.Add(new Offset(0.0f, 20.0f, 0.0f));
markerArg.Offsets.Add(new Offset(20.0f, 20.0f, 90.0f));
markerArg.Offsets.Add(new Offset(-20.0f, 0.0f, -180.0f));
markerArg.Offsets.Add(new Offset(0.0f, 0.0f, 0.0f));
markerArg.Offsets.Add(new Offset(20.0f, 0.0f, 180.0f));
markerArg.Offsets.Add(new Offset(-20.0f, -20.0f, -270.0f));
markerArg.Offsets.Add(new Offset(0.0f, -20.0f, 0.0f));
markerArg.Offsets.Add(new Offset(20.0f, -20.0f, 270.0f));
bool success = true;
// 마커에 가공 문서(doc)및 rtc, laser 정보를 전달하고 가공 준비를 실시한다.
success &= marker.Ready(markerArg);
// 가공을 시작한다.
success &= marker.Start();
return(success);
}
private bool MyInitialize()
{
#region 사용자의 초기화 코드 예제
bool success = true;
success &= SpiralLab.Core.Initialize();
var doc = new DocumentDefault();
this.Document = doc;
//var rtc = new RtcVirtual(0); //create Rtc for dummy
var rtc = new Rtc5(0); //create Rtc5 controller
//var rtc = new Rtc6(0); //create Rtc6 controller
//var rtc = new Rtc6Ethernet(0, "192.168.0.100", "255.255.255.0"); //실험적인 상태 (Scanlab Rtc6 Ethernet 제어기)
//var rtc = new Rtc6SyncAxis(0, Path.Combine(AppDomain.CurrentDomain.BaseDirectory, "syncAxis", "syncAXISConfig.xml")); //실험적인 상태 (Scanlab XLSCAN 솔류션)
float fov = 60.0f; ///scanner field of view : 60mm
float kfactor = (float)Math.Pow(2, 20) / fov; // k factor (bits/mm) = 2^20 / fov
var correctionFile = Path.Combine(AppDomain.CurrentDomain.BaseDirectory, "correction", "cor_1to1.ct5");
success &= rtc.Initialize(kfactor, LaserMode.Yag1, correctionFile); // 스캐너 보정 파일 지정 : correction file
success &= rtc.CtlFrequency(50 * 1000, 2); // laser frequency : 50KHz, pulse width : 2usec
success &= rtc.CtlSpeed(100, 100); // default jump and mark speed : 100mm/s
success &= rtc.CtlDelay(10, 100, 200, 200, 0); // scanner and laser delays
this.Rtc = rtc;
var laser = new LaserVirtual(0, "virtual", 20.0f);
laser.Rtc = rtc;
success &= laser.Initialize();
success &= laser.CtlPower(10);
this.Laser = laser;
var marker = new MarkerDefault(0);
this.Marker = marker;
#endregion
return(success);
}
private static bool DrawByMarker(IDocument doc, IRtc rtc, ILaser laser)
{
var marker = new MarkerDefault(0);
marker.Name = "marker #1";
//가공 완료 이벤트 핸들러 등록
marker.OnFinished += Marker_OnFinished;
var markerArg = new MarkerArgDefault()
{
Document = doc,
Rtc = rtc,
Laser = laser,
};
// 하나의 오프셋 정보(0,0 및 회전각도 0) 를 추가한다.
markerArg.Offsets.Add(Offset.Zero);
bool success = true;
// 마커에 가공 문서(doc)및 rtc, laser 정보를 전달하고 가공 준비를 실시한다.
success &= marker.Ready(markerArg);
// 가공을 시작한다.
success &= marker.Start();
return(success);
}
private void MainForm_Load(object sender, EventArgs e)
{
var xmlConfigFileName = Path.Combine(AppDomain.CurrentDomain.BaseDirectory, "syncAxis", "syncAXISConfig.xml");
if (!File.Exists(xmlConfigFileName))
{
MessageBox.Show($"XML configuration file is not founded : {xmlConfigFileName}");
return;
}
#region SyncAxis 초기화
bool success = true;
var rtc = new Rtc6SyncAxis(0, xmlConfigFileName);
rtc.Name = "SyncAxis";
success &= rtc.Initialize(0, LaserMode.None, string.Empty);
success &= rtc.CtlFrequency(50 * 1000, 2); // laser frequency : 50KHz, pulse width : 2usec
success &= rtc.CtlSpeed(100, 100); // default scanner jump and mark speed : 100mm/s
//스테이지 이동시 기본 값 설정
rtc.StageMoveSpeed = 10;
rtc.StageMoveTimeOut = 5;
#endregion
#region 레이저 소스 초기화
var laser = new LaserVirtual(0, "virtual", 20); // virtual laser source with max 20W power (최대 출력 20W 의 가상 레이저 소스 생성)
//var laser = new IPGYLP(0, "IPG YLP", 1, 20);
//var laser = new JPTTypeE(0, "JPT Type E", 1, 20);
//var laser = new SPIG4(0, "SPI G3/4", 1, 20);
//var laser = new PhotonicsIndustryDX(0, "PI", 1, 20);
//var laser = new AdvancedOptoWaveFotia(0, "Fotia", 1, 20);
//var laser = new CoherentAviaLX(0, "Avia LX", 1, 20);
laser.Rtc = rtc;
laser.Initialize();
laser.CtlPower(2);
#endregion
#region 마커 지정
var marker = new MarkerDefault(0, " SyncAxis Marker ");
#endregion
#region RTC 확장 IO
this.RtcExt1DInput = new RtcDInput(rtc, 0, "DIN RTC EXT1");
this.RtcExt1DInput.Initialize();
this.RtcExt1DOutput = new RtcDOutputExt1(rtc, 0, "DOUT RTC EXT1");
this.RtcExt1DOutput.Initialize();
this.RtcExt2DOutput = new RtcDOutputExt2(rtc, 0, "DIN RTC EXT2");
this.RtcExt2DOutput.Initialize();
this.siriusEditorForm1.RtcExtension1Input = this.RtcExt1DInput;
this.siriusEditorForm1.RtcExtension1Output = this.RtcExt1DOutput;
this.siriusEditorForm1.RtcExtension2Output = this.RtcExt2DOutput;
#endregion
this.Rtc = rtc;
this.siriusEditorForm1.Rtc = rtc;
this.siriusEditorForm1.Laser = laser;
this.siriusEditorForm1.Marker = marker;
}
public MainForm()
{
InitializeComponent();
SpiralLab.Core.Initialize();
// 신규 문서 생성
var doc = new DocumentDefault();
// 문서 지정
siriusEditorForm1.Document = doc;
// 기본 펜 생성후 문서에 추가
var pen = new CustomPen();
doc.Action.ActEntityAdd(pen);
// 내부 데이타(IDocument) 가 변경될경우 이를 이벤트 통지를 받는 핸들러 등록
siriusEditorForm1.OnDocumentSourceChanged += SiriusEditorForm1_OnDocumentSourceChanged;
#region RTC 초기화
//var rtc = new RtcVirtual(0); //create Rtc for dummy
var rtc = new Rtc5(0); //create Rtc5 controller
//var rtc = new Rtc6(0); //create Rtc6 controller
//var rtc = new Rtc6Ethernet(0, "192.168.0.100", "255.255.255.0"); //실험적인 상태 (Scanlab Rtc6 Ethernet 제어기)
//var rtc = new Rtc6SyncAxis(0, Path.Combine(AppDomain.CurrentDomain.BaseDirectory, "syncAxis", "syncAXISConfig.xml")); //실험적인 상태 (Scanlab XLSCAN 솔류션)
float fov = 60.0f; ///scanner field of view : 60mm
float kfactor = (float)Math.Pow(2, 20) / fov; // k factor (bits/mm) = 2^20 / fov
var correctionFile = Path.Combine(AppDomain.CurrentDomain.BaseDirectory, "correction", "cor_1to1.ct5");
rtc.Initialize(kfactor, LaserMode.Yag1, correctionFile); // 스캐너 보정 파일 지정 : correction file
rtc.CtlFrequency(50 * 1000, 2); // laser frequency : 50KHz, pulse width : 2usec
rtc.CtlSpeed(100, 100); // default jump and mark speed : 100mm/s
rtc.CtlDelay(10, 100, 200, 200, 0); // scanner and laser delays
#endregion
this.siriusEditorForm1.Rtc = rtc;
#region 레이저 소스 초기화
var laser = new LaserVirtual(0, "virtual", 20); // virtual laser source with max 20W power (최대 출력 20W 의 가상 레이저 소스 생성)
//var laser = new IPGYLP(0, "IPG YLP", 1, 20);
//var laser = new JPTTypeE(0, "JPT Type E", 1, 20);
//var laser = new SPIG4(0, "SPI G3/4", 1, 20);
//var laser = new PhotonicsIndustryDX(0, "PI", 1, 20);
//var laser = new AdvancedOptoWaveFotia(0, "Fotia", 1, 20);
//var laser = new CoherentAviaLX(0, "Avia LX", 1, 20);
laser.Rtc = rtc;
laser.Initialize();
laser.CtlPower(2);
#endregion
this.siriusEditorForm1.Laser = laser;
#region 마커 지정
var marker = new MarkerDefault(0);
#endregion
this.siriusEditorForm1.Marker = marker;
this.siriusEditorForm1.OnDocumentPenNew += SiriusEditorForm1_OnDocumentPenNew;
}
private static void DrawByMarker(IDocument doc, IRtc rtc, ILaser laser)
{
var marker = new MarkerDefault(0);
marker.Name = "marker #1";
marker.OnFinished += Marker_OnFinished;
marker.Ready(doc, rtc, laser); //layer cloned
marker.Start();
}
public FormMain()
{
InitializeComponent();
SpiralLab.Core.Initialize();
var doc = new DocumentDefault();
siriusEditorForm1.Document = doc;
siriusViewerForm1.Document = doc;
/// 소스 문서(IDocument) 가 변경될경우 다른 멀티 뷰에 이를 통지하는 이벤트 핸들러 등록
siriusEditorForm1.OnDocumentSourceChanged += SiriusEditorForm1_OnDocumentSourceChanged;
#region RTC 초기화
var rtc = new RtcVirtual(0); ///create Rtc for dummy
//var rtc = new Rtc5(0); ///create Rtc5 controller
//var rtc = new Rtc6(0); ///create Rtc6 controller
//var rtc = new Rtc6Ethernet(0, "192.168.0.200"); ///create Rtc6 ethernet controller
//var rtc = new Rtc53D(0); ///create Rtc5 + 3D option controller
//var rtc = new Rtc63D(0); ///create Rtc5 + 3D option controller
//var rtc = new Rtc5DualHead(0); ///create Rtc5 + Dual head option controller
//var rtc = new Rtc5MOTF(0); ///create Rtc5 + MOTF option controller
//var rtc = new Rtc6MOTF(0); ///create Rtc6 + MOTF option controller
//var rtc = new Rtc6SyncAxis(0);
//var rtc = new Rtc6SyncAxis(0, "syncAXISConfig.xml"); ///create Rtc6 + XL-SCAN (ACS+SYNCAXIS) option controller
float fov = 60.0f; /// scanner field of view : 60mm
float kfactor = (float)Math.Pow(2, 20) / fov; /// k factor (bits/mm) = 2^20 / fov
rtc.Initialize(kfactor, LaserMode.Yag1, "cor_1to1.ct5"); /// 스캐너 보정 파일 지정 : correction file
rtc.CtlFrequency(50 * 1000, 2); /// laser frequency : 50KHz, pulse width : 2usec
rtc.CtlSpeed(100, 100); /// default jump and mark speed : 100mm/s
rtc.CtlDelay(10, 100, 200, 200, 0); /// scanner and laser delays
#endregion
this.siriusEditorForm1.Rtc = rtc;
#region 레이저 소스 초기화
ILaser laser = new LaserVirtual(0, "virtual", 20.0f);
laser.Initialize();
var pen = new Pen
{
Power = 10.0f,
};
laser.CtlPower(rtc, pen);
#endregion
this.siriusEditorForm1.Laser = laser;
#region 마커 지정
var marker = new MarkerDefault(0);
#endregion
this.siriusEditorForm1.Marker = marker;
}
public MainWindow()
{
InitializeComponent();
SpiralLab.Core.Initialize();
var siriusEditorForm = (siriusEditor.Child as SiriusEditorForm);
//펜 집합 기능 사용
siriusEditorForm.EnablePens = true;
var doc = new DocumentDefault();
siriusEditorForm.Document = doc;
#region RTC 초기화
//var rtc = new RtcVirtual(0); //create Rtc for dummy (가상 RTC 카드)
var rtc = new Rtc5(0); //create Rtc5 controller
//var rtc = new Rtc6(0); //create Rtc6 controller
//var rtc = new Rtc6Ethernet(0, "192.168.0.100", "255.255.255.0"); //Rtc6 Ethernet
//var rtc = new Rtc6SyncAxis(0, Path.Combine(AppDomain.CurrentDomain.BaseDirectory, "syncAxis", "syncAXISConfig.xml")); //Scanlab XLSCAN
float fov = 60.0f; ///scanner field of view : 60mm
float kfactor = (float)Math.Pow(2, 20) / fov; // k factor (bits/mm) = 2^20 / fov
var correctionFile = System.IO.Path.Combine(AppDomain.CurrentDomain.BaseDirectory, "correction", "cor_1to1.ct5");
rtc.Initialize(kfactor, LaserMode.Yag1, correctionFile); // 스캐너 보정 파일 지정 : correction file
rtc.CtlFrequency(50 * 1000, 2); // laser frequency : 50KHz, pulse width : 2usec
rtc.CtlSpeed(100, 100); // default jump and mark speed : 100mm/s
rtc.CtlDelay(10, 100, 200, 200, 0); // scanner and laser delays
#endregion
siriusEditorForm.Rtc = rtc;
#region initialize Laser (virtual)
var laser = new LaserVirtual(0, "virtual", 20); // virtual laser source with max 20W power (최대 출력 20W 의 가상 레이저 소스 생성)
//var laser = new IPGYLP(0, "IPG YLP", 1, 20);
//var laser = new JPTTypeE(0, "JPT Type E", 1, 20);
//var laser = new SPIG4(0, "SPI G3/4", 1, 20);
//var laser = new PhotonicsIndustryDX(0, "PI", 1, 20);
//var laser = new AdvancedOptoWaveFotia(0, "Fotia", 1, 20);
//var laser = new CoherentAviaLX(0, "Avia LX", 1, 20);
laser.Rtc = rtc;
laser.Initialize();
laser.CtlPower(2);
#endregion
siriusEditorForm.Laser = laser;
#region 마커 지정
var marker = new MarkerDefault(0);
#endregion
siriusEditorForm.Marker = marker;
}
private static void DrawByMarker(IDocument doc, IRtc rtc, ILaser laser)
{
var marker = new MarkerDefault(0);
marker.Name = "marker #1";
///가공 완료 이벤트 핸들러 등록
marker.OnFinished += Marker_OnFinished;
/// 마커에 가공 문서(doc)및 rtc, laser 정보를 전달하고 가공 준비를 실시한다.
marker.Ready(doc, rtc, laser);
/// 하나의 오프셋 정보(0,0및 회전각도 0) 를 추가한다.
marker.Offsets.Clear();
marker.Offsets.Add(Offset.Zero);
/// 가공을 시작한다.
marker.Start();
}
private static void DrawByMarkerWithOffset(IDocument doc, IRtc rtc, ILaser laser)
{
var marker = new MarkerDefault(0);
marker.Name = "marker #2";
marker.OnFinished += Marker_OnFinished;
marker.Offsets.Add((-20.0, 20.0, -90));
marker.Offsets.Add((0.0, 20.0, 0.0));
marker.Offsets.Add((20.0, 20.0, 90.0));
marker.Offsets.Add((-20.0, 0.0, -180.0));
marker.Offsets.Add((0.0, 0.0, 0.0));
marker.Offsets.Add((20.0, 0.0f, 180.0));
marker.Offsets.Add((-20.0, -20.0, -270.0));
marker.Offsets.Add((0.0, -20.0, 0.0));
marker.Offsets.Add((20.0, -20.0, 270.0));
marker.Ready(doc, rtc, laser); //layer cloned
marker.Start();
}
public FormMain()
{
InitializeComponent();
SpiralLab.Core.Initialize();
var doc = new DocumentDefault();
siriusEditorForm1.Document = doc;
siriusViewerForm1.Document = doc;
/// 소스 문서(IDocument) 가 변경될경우 다른 멀티 뷰에 이를 통지하는 이벤트 핸들러 등록
siriusEditorForm1.OnDocumentSourceChanged += SiriusEditorForm1_OnDocumentSourceChanged;
siriusViewerForm1.OnDocumentSourceChanged += SiriusEditorForm1_OnDocumentSourceChanged;
#region RTC 초기화
//IRtc rtc = new RtcVirtual(0); ///가상 rtc 제어기 생성
IRtc rtc = new RtcGCode(0, "output.txt"); ///가상 rtc 제어기 생성
//IRtc rtc = new Rtc5(0); ///rtc 5 제어기 생성
double fov = 60.0; /// scanner field of view : 60mm
double kfactor = Math.Pow(2, 20) / fov; /// k factor (bits/mm) = 2^20 / fov
rtc.Initialize(kfactor, LaserMode.Yag1, "cor_1to1.ct5"); /// 스캐너 보정 파일 지정 : correction file
rtc.CtlFrequency(50 * 1000, 2); /// laser frequency : 50KHz, pulse width : 2usec
rtc.CtlSpeed(100, 100); /// default jump and mark speed : 100mm/s
rtc.CtlDelay(10, 100, 200, 200, 0); /// scanner and laser delays
#endregion
this.siriusEditorForm1.Rtc = rtc;
#region 레이저 소스 초기화
ILaser laser = new LaserVirtual(0, "virtual", 20.0f);
laser.Initialize();
laser.CtlPower(rtc, 8.0f);
#endregion
this.siriusEditorForm1.Laser = laser;
#region 마커 지정
var marker = new MarkerDefault(0);
#endregion
this.siriusEditorForm1.Marker = marker;
}
private static void DrawByMarkerWithOffset(IDocument doc, IRtc rtc, ILaser laser)
{
var marker = new MarkerDefault(0);
marker.Name = "marker #2";
///가공 완료 이벤트 핸들러 등록
marker.OnFinished += Marker_OnFinished;
/// 9개의 오프셋 정보를 추가한다
marker.Offsets.Clear();
marker.Offsets.Add(new Offset(-20.0f, 20.0f, -90f));
marker.Offsets.Add(new Offset(0.0f, 20.0f, 0.0f));
marker.Offsets.Add(new Offset(20.0f, 20.0f, 90.0f));
marker.Offsets.Add(new Offset(-20.0f, 0.0f, -180.0f));
marker.Offsets.Add(new Offset(0.0f, 0.0f, 0.0f));
marker.Offsets.Add(new Offset(20.0f, 0.0f, 180.0f));
marker.Offsets.Add(new Offset(-20.0f, -20.0f, -270.0f));
marker.Offsets.Add(new Offset(0.0f, -20.0f, 0.0f));
marker.Offsets.Add(new Offset(20.0f, -20.0f, 270.0f));
/// 마커에 가공 문서(doc)및 rtc, laser 정보를 전달하고 가공 준비를 실시한다.
marker.Ready(doc, rtc, laser);
/// 가공을 시작한다.
marker.Start();
}
private bool SiriusLibInit()
{
// 기본 문서 생성
var doc = new Sirius.DocumentDefault();
this.FormAuto.SiriusViewer.Document = doc;
this.FormEditor.SiriusEditor.Document = doc;
// 소스 문서(IDocument) 가 변경될경우 다른 멀티 뷰에 이를 통지하는 이벤트 핸들러 등록
this.FormEditor.SiriusEditor.OnDocumentSourceChanged += SiriusEditorForm_OnDocumentSourceChanged;
bool success = true;
#region RTC 초기화
uint i = 0;
//var rtcCounts = NativeMethods.ReadIni<int>(Program.ConfigFileName, "RTC", "COUNTS");
//for (uint i = 0; i < rtcCounts; i++)
//{
var rtcTypeName = NativeMethods.ReadIni <string>(ConfigFileName, $"RTC{i}", "TYPE");
Type rtcType = Type.GetType(rtcTypeName.Trim());
if (null == rtcType)
{
var mb = new Default.MessageBoxOk();
mb.ShowDialog("Critical", $"Can't create rtc instance : {rtcType.ToString()} at {ConfigFileName}");
success &= false;
}
var rtc = Activator.CreateInstance(rtcType) as IRtc;
var rtcName = NativeMethods.ReadIni <string>(ConfigFileName, $"RTC{i}", "NAME");
rtc.Name = rtcName;
rtc.Index = i;
var kFactor = NativeMethods.ReadIni <float>(ConfigFileName, $"RTC{i}", "KFACTOR");
var ct5FileName = NativeMethods.ReadIni <string>(ConfigFileName, $"RTC{i}", "CORRECTION");
var laserModeTypeName = NativeMethods.ReadIni <string>(ConfigFileName, $"RTC{i}", "LASERMODE");
LaserMode laserMode = (LaserMode)Enum.Parse(typeof(LaserMode), laserModeTypeName.Trim());
success &= rtc.Initialize(kFactor, laserMode, ct5FileName);
rtc.CtlFrequency(50 * 1000, 2); // laser frequency : 50KHz, pulse width : 2usec
rtc.CtlSpeed(100, 100); // default jump and mark speed : 100mm/s
rtc.CtlDelay(10, 100, 200, 200, 0); // scanner and laser delays
this.FormEditor.SiriusEditor.Rtc = rtc;
//}
#endregion
#region 레이저 소스 초기화
//var laserCounts = NativeMethods.ReadIni<int>(Program.ConfigFileName, "LASER", "COUNTS");
//for (uint i = 0; i < laserCounts; i++)
//{
var laserTypeName = NativeMethods.ReadIni <string>(ConfigFileName, $"LASER{i}", "TYPE");
Type laserType = Type.GetType(laserTypeName.Trim());
if (null == laserType)
{
var mb = new Default.MessageBoxOk();
mb.ShowDialog("Critical", $"Can't create laser instance : {laserType.ToString()} at {ConfigFileName}");
success &= false;
}
var laser = Activator.CreateInstance(laserType) as ILaser;
//ILaser laser = new Sirius.LaserVirtual(0, "virtual", 20.0f);
var laserName = NativeMethods.ReadIni <string>(ConfigFileName, $"LASER{i}", "NAME");
laser.Rtc = rtc;
laser.Index = i;
laser.Name = laserName;
var maxPower = NativeMethods.ReadIni <float>(ConfigFileName, $"LASER{i}", "MAXPOWER");
laser.MaxPowerWatt = maxPower;
success &= laser.Initialize();
var powerControl = laser as IPowerControl;
if (null != powerControl)
{
success &= powerControl.CtlPower(10);
}
this.FormEditor.SiriusEditor.Laser = laser;
//}
this.FormEditor.SiriusEditor.Laser = laser;
#endregion
#region 마커 지정
var marker = new MarkerDefault(0);
this.FormEditor.SiriusEditor.Marker = marker;
#endregion
return(success);
}
public FormMain()
{
InitializeComponent();
SpiralLab.Core.Initialize();
//Rtc 2개 생성
var rtc1 = new RtcVirtual(0, "output1.txt");
rtc1.Initialize(1000, LaserMode.Yag1, null);
var rtc2 = new RtcVirtual(1, "output2.txt");
rtc2.Initialize(1000, LaserMode.Yag1, null);
//Laser 2개 생성
var laser1 = new LaserVirtual(0, "Virtual Laser1", 20);
laser1.Initialize();
var laser2 = new LaserVirtual(1, "Virtual Laser2", 20);
laser2.Initialize();
//Marker 2개 생성
var marker1 = new MarkerDefault(0);
var marker2 = new MarkerDefault(1);
//두개의 문서 생성
var doc1 = new DocumentDefault();
var doc2 = new DocumentDefault();
//뷰어에 문서 소스 설정
this.formViewer = new FormViewer();
this.formViewer.Viewer1.Document = doc1;
this.formViewer.Viewer1.AliasName = "Left Viewer";
this.formViewer.Viewer2.Document = doc2;
this.formViewer.Viewer2.AliasName = "Right Viewer";
//에디터 1에 문서 소스 설정
this.formEditor1 = new FormEditor();
this.formEditor1.Editor.Document = doc1;
this.formEditor1.Editor.AliasName = "Left Editor";
//에디터 2에 문서 소스 설정
this.formEditor2 = new FormEditor();
this.formEditor2.Editor.Document = doc2;
this.formEditor2.Editor.AliasName = "Right Editor";
//소스 문서(IDocument) 가 변경될경우 다른 멀티 뷰에 이를 통지가능하도록 이벤트 핸들러 등록
this.formViewer.Viewer1.OnDocumentSourceChanged += Viewer1_OnDocumentSourceChanged;
this.formEditor1.Editor.OnDocumentSourceChanged += Viewer1_OnDocumentSourceChanged;
this.formViewer.Viewer2.OnDocumentSourceChanged += Viewer2_OnDocumentSourceChanged;
this.formEditor2.Editor.OnDocumentSourceChanged += Viewer2_OnDocumentSourceChanged;
// 뷰어1 와 하드웨어 연결
this.formViewer.Viewer1.Rtc = rtc1;
this.formViewer.Viewer1.Laser = laser1;
this.formViewer.Viewer1.Marker = marker1;
//뷰어2 와 하드웨어 연결
this.formViewer.Viewer2.Rtc = rtc2;
this.formViewer.Viewer2.Laser = laser2;
this.formViewer.Viewer2.Marker = marker2;
// 에디터1 와 하드웨어 연결
this.formEditor1.Editor.Rtc = rtc1;
this.formEditor1.Editor.Laser = laser1;
this.formEditor1.Editor.Marker = marker1;
//에디터1 와 하드웨어 연결
this.formEditor2.Editor.Rtc = rtc2;
this.formEditor2.Editor.Laser = laser2;
this.formEditor2.Editor.Marker = marker2;
// 뷰어를 초기화면에 출력
SwitchForm(panel3, this.formViewer);
}
public FormMain()
{
InitializeComponent();
SpiralLab.Core.Initialize();
//Rtc 제어기 객체 2개 생성
var rtc1 = new RtcVirtual(0, "output1.txt");
var rtc2 = new RtcVirtual(1, "output2.txt");
//var rtc = new Rtc5(0); //create Rtc5 controller
//var rtc = new Rtc6(0); //create Rtc6 controller
//var rtc = new Rtc6Ethernet(0, "192.168.0.100", "255.255.255.0"); //실험적인 상태 (Scanlab Rtc6 Ethernet 제어기)
//var rtc = new Rtc6SyncAxis(0, Path.Combine(AppDomain.CurrentDomain.BaseDirectory, "syncAxis", "syncAXISConfig.xml")); //실험적인 상태 (Scanlab XLSCAN 솔류션)
var correctionFile = Path.Combine(AppDomain.CurrentDomain.BaseDirectory, "correction", "cor_1to1.ct5");
rtc1.Initialize(1000, LaserMode.Yag1, correctionFile);
rtc2.Initialize(1000, LaserMode.Yag1, correctionFile);
//Laser 소스 객체 2개 생성
var laser1 = new LaserVirtual(0, "virtual", 20); // virtual laser source with max 20W power (최대 출력 20W 의 가상 레이저 소스 생성)
//var laser1 = new IPGYLP(0, "IPG YLP", 1, 20);
//var laser1 = new JPTTypeE(0, "JPT Type E", 1, 20);
//var laser1 = new SPIG4(0, "SPI G3/4", 1, 20);
//var laser1 = new PhotonicsIndustryDX(0, "PI", 1, 20);
//var laser1 = new AdvancedOptoWaveFotia(0, "Fotia", 1, 20);
//var laser1 = new CoherentAviaLX(0, "Avia LX", 1, 20);
laser1.Rtc = rtc1;
laser1.Initialize();
laser1.CtlPower(2);
var laser2 = new LaserVirtual(0, "virtual", 20); // virtual laser source with max 20W power (최대 출력 20W 의 가상 레이저 소스 생성)
//var laser2 = new IPGYLP(0, "IPG YLP", 2, 20);
//var laser2 = new JPTTypeE(0, "JPT Type E", 2, 20);
//var laser2 = new SPIG4(0, "SPI G3/4", 2, 20);
//var laser2 = new PhotonicsIndustryDX(0, "PI", 2, 20);
//var laser2 = new AdvancedOptoWaveFotia(0, "Fotia", 2, 20);
//var laser2 = new CoherentAviaLX(0, "Avia LX", 2, 20);
laser2.Rtc = rtc2;
laser2.Initialize();
laser2.CtlPower(2);
//Marker 2개 생성
var marker1 = new MarkerDefault(0);
var marker2 = new MarkerDefault(1);
//두개의 문서 생성
var doc1 = new DocumentDefault();
var doc2 = new DocumentDefault();
//뷰어에 문서 소스 설정
this.formViewer = new FormViewer();
this.formViewer.Viewer1.Document = doc1;
this.formViewer.Viewer1.AliasName = "Left Viewer";
this.formViewer.Viewer2.Document = doc2;
this.formViewer.Viewer2.AliasName = "Right Viewer";
//에디터 1에 문서 소스 설정
this.formEditor1 = new FormEditor();
this.formEditor1.Editor.Document = doc1;
this.formEditor1.Editor.AliasName = "Left Editor";
//에디터 2에 문서 소스 설정
this.formEditor2 = new FormEditor();
this.formEditor2.Editor.Document = doc2;
this.formEditor2.Editor.AliasName = "Right Editor";
//소스 문서(IDocument) 가 변경될경우 다른 멀티 뷰에 이를 통지가능하도록 이벤트 핸들러 등록
this.formEditor1.Editor.OnDocumentSourceChanged += Editor1_OnDocumentSourceChanged;
this.formEditor2.Editor.OnDocumentSourceChanged += Editor2_OnDocumentSourceChanged;
// 기본 펜 개체 생성
var pen1 = new PenDefault();
doc1.Action.ActEntityAdd(pen1);
var pen2 = new PenDefault();
doc2.Action.ActEntityAdd(pen2);
// 에디터1 와 하드웨어 연결
this.formEditor1.Editor.Rtc = rtc1;
this.formEditor1.Editor.Laser = laser1;
this.formEditor1.Editor.Marker = marker1;
//에디터1 와 하드웨어 연결
this.formEditor2.Editor.Rtc = rtc2;
this.formEditor2.Editor.Laser = laser2;
this.formEditor2.Editor.Marker = marker2;
// 뷰어를 초기화면에 출력
SwitchForm(panel3, this.formViewer);
}
public FormMain()
{
InitializeComponent();
SpiralLab.Core.Initialize();
//Rtc 2개 생성
var rtc1 = new RtcVirtual(0, "output1.txt");
var rtc2 = new RtcVirtual(1, "output2.txt");
//var rtc = new Rtc5(0); ///create Rtc5 controller
//var rtc = new Rtc6(0); ///create Rtc6 controller
//var rtc = new Rtc6Ethernet(0, "192.168.0.200"); ///create Rtc6 ethernet controller
//var rtc = new Rtc53D(0); ///create Rtc5 + 3D option controller
//var rtc = new Rtc63D(0); ///create Rtc5 + 3D option controller
//var rtc = new Rtc5DualHead(0); ///create Rtc5 + Dual head option controller
//var rtc = new Rtc5MOTF(0); ///create Rtc5 + MOTF option controller
//var rtc = new Rtc6MOTF(0); ///create Rtc6 + MOTF option controller
//var rtc = new Rtc6SyncAxis(0);
//var rtc = new Rtc6SyncAxis(0, "syncAXISConfig.xml"); ///create Rtc6 + XL-SCAN (ACS+SYNCAXIS) option controller
var correctionFile = Path.Combine(AppDomain.CurrentDomain.BaseDirectory, "correction", "cor_1to1.ct5");
rtc1.Initialize(1000, LaserMode.Yag1, correctionFile);
rtc2.Initialize(1000, LaserMode.Yag1, correctionFile);
//Laser 2개 생성
var laser1 = new LaserVirtual(0, "Virtual Laser1", 20);
laser1.Initialize();
var laser2 = new LaserVirtual(1, "Virtual Laser2", 20);
laser2.Initialize();
//Marker 2개 생성
var marker1 = new MarkerDefault(0);
var marker2 = new MarkerDefault(1);
//두개의 문서 생성
var doc1 = new DocumentDefault();
var doc2 = new DocumentDefault();
//뷰어에 문서 소스 설정
this.formViewer = new FormViewer();
this.formViewer.Viewer1.Document = doc1;
this.formViewer.Viewer1.AliasName = "Left Viewer";
this.formViewer.Viewer2.Document = doc2;
this.formViewer.Viewer2.AliasName = "Right Viewer";
//에디터 1에 문서 소스 설정
this.formEditor1 = new FormEditor();
this.formEditor1.Editor.Document = doc1;
this.formEditor1.Editor.AliasName = "Left Editor";
//에디터 2에 문서 소스 설정
this.formEditor2 = new FormEditor();
this.formEditor2.Editor.Document = doc2;
this.formEditor2.Editor.AliasName = "Right Editor";
//소스 문서(IDocument) 가 변경될경우 다른 멀티 뷰에 이를 통지가능하도록 이벤트 핸들러 등록
this.formEditor1.Editor.OnDocumentSourceChanged += Editor1_OnDocumentSourceChanged;
this.formEditor2.Editor.OnDocumentSourceChanged += Editor2_OnDocumentSourceChanged;
// 에디터1 와 하드웨어 연결
this.formEditor1.Editor.Rtc = rtc1;
this.formEditor1.Editor.Laser = laser1;
this.formEditor1.Editor.Marker = marker1;
//에디터1 와 하드웨어 연결
this.formEditor2.Editor.Rtc = rtc2;
this.formEditor2.Editor.Laser = laser2;
this.formEditor2.Editor.Marker = marker2;
// 뷰어를 초기화면에 출력
SwitchForm(panel3, this.formViewer);
}
