public void Run(string[] sources, Library.Utility.IFilter filter)
{
m_result.OperationProgressUpdater.UpdatePhase(OperationPhase.Backup_Begin);
using(m_database = new LocalBackupDatabase(m_options.Dbpath, m_options))
{
m_result.SetDatabase(m_database);
m_result.Dryrun = m_options.Dryrun;
Utility.VerifyParameters(m_database, m_options);
m_database.VerifyConsistency(null);
// If there is no filter, we set an empty filter to simplify the code
// If there is a filter, we make sure that the sources are included
m_filter = filter ?? new Library.Utility.FilterExpression();
m_sourceFilter = new Library.Utility.FilterExpression(sources, true);
var lastVolumeSize = -1L;
m_backendLogFlushTimer = DateTime.Now.Add(FLUSH_TIMESPAN);
System.Threading.Thread parallelScanner = null;
try
{
m_snapshot = GetSnapshot(sources, m_options, m_result);
// Start parallel scan
if (m_options.ChangedFilelist == null || m_options.ChangedFilelist.Length < 1)
{
parallelScanner = new System.Threading.Thread(CountFilesThread) {
Name = "Read ahead file counter",
IsBackground = true
};
parallelScanner.Start();
}
using(m_backend = new BackendManager(m_backendurl, m_options, m_result.BackendWriter, m_database))
using(m_filesetvolume = new FilesetVolumeWriter(m_options, m_database.OperationTimestamp))
{
var incompleteFilesets = m_database.GetIncompleteFilesets(null).OrderBy(x => x.Value).ToArray();
if (incompleteFilesets.Length != 0)
{
m_result.OperationProgressUpdater.UpdatePhase(OperationPhase.Backup_PreviousBackupFinalize);
m_result.AddMessage(string.Format("Uploading filelist from previous interrupted backup"));
using(var trn = m_database.BeginTransaction())
{
var incompleteSet = incompleteFilesets.Last();
var badIds = from n in incompleteFilesets select n.Key;
var prevs = (from n in m_database.FilesetTimes
where
n.Key < incompleteSet.Key
&&
!badIds.Contains(n.Key)
orderby n.Key
select n.Key).ToArray();
var prevId = prevs.Length == 0 ? -1 : prevs.Last();
FilesetVolumeWriter fsw = null;
try
{
var s = 1;
var fileTime = incompleteSet.Value + TimeSpan.FromSeconds(s);
var oldFilesetID = incompleteSet.Key;
// Probe for an unused filename
while (s < 60)
{
var id = m_database.GetRemoteVolumeID(VolumeBase.GenerateFilename(RemoteVolumeType.Files, m_options, null, fileTime));
if (id < 0)
break;
fileTime = incompleteSet.Value + TimeSpan.FromSeconds(++s);
}
fsw = new FilesetVolumeWriter(m_options, fileTime);
fsw.VolumeID = m_database.RegisterRemoteVolume(fsw.RemoteFilename, RemoteVolumeType.Files, RemoteVolumeState.Temporary, m_transaction);
var newFilesetID = m_database.CreateFileset(fsw.VolumeID, fileTime, trn);
m_database.LinkFilesetToVolume(newFilesetID, fsw.VolumeID, trn);
m_database.AppendFilesFromPreviousSet(trn, null, newFilesetID, prevId, fileTime);
m_database.WriteFileset(fsw, trn, newFilesetID);
if (m_options.Dryrun)
{
m_result.AddDryrunMessage(string.Format("Would upload fileset: {0}, size: {1}", fsw.RemoteFilename, Library.Utility.Utility.FormatSizeString(new FileInfo(fsw.LocalFilename).Length)));
}
else
{
m_database.UpdateRemoteVolume(fsw.RemoteFilename, RemoteVolumeState.Uploading, -1, null, trn);
using(new Logging.Timer("CommitUpdateFilelistVolume"))
trn.Commit();
m_backend.Put(fsw);
fsw = null;
}
}
finally
{
if (fsw != null)
try { fsw.Dispose(); }
catch { fsw = null; }
}
}
}
if (!m_options.NoBackendverification)
{
m_result.OperationProgressUpdater.UpdatePhase(OperationPhase.Backup_PreBackupVerify);
using(new Logging.Timer("PreBackupVerify"))
{
try
{
FilelistProcessor.VerifyRemoteList(m_backend, m_options, m_database, m_result.BackendWriter);
}
catch (Exception ex)
{
if (m_options.AutoCleanup)
{
m_result.AddWarning("Backend verification failed, attempting automatic cleanup", ex);
m_result.RepairResults = new RepairResults(m_result);
new RepairHandler(m_backend.BackendUrl, m_options, (RepairResults)m_result.RepairResults).Run();
m_result.AddMessage("Backend cleanup finished, retrying verification");
FilelistProcessor.VerifyRemoteList(m_backend, m_options, m_database, m_result.BackendWriter);
}
else
throw;
}
}
}
m_database.BuildLookupTable(m_options);
m_transaction = m_database.BeginTransaction();
m_result.OperationProgressUpdater.UpdatePhase(OperationPhase.Backup_ProcessingFiles);
var filesetvolumeid = m_database.RegisterRemoteVolume(m_filesetvolume.RemoteFilename, RemoteVolumeType.Files, RemoteVolumeState.Temporary, m_transaction);
m_database.CreateFileset(filesetvolumeid, VolumeBase.ParseFilename(m_filesetvolume.RemoteFilename).Time, m_transaction);
m_blockvolume = new BlockVolumeWriter(m_options);
m_blockvolume.VolumeID = m_database.RegisterRemoteVolume(m_blockvolume.RemoteFilename, RemoteVolumeType.Blocks, RemoteVolumeState.Temporary, m_transaction);
if (m_options.IndexfilePolicy != Options.IndexFileStrategy.None)
{
m_indexvolume = new IndexVolumeWriter(m_options);
m_indexvolume.VolumeID = m_database.RegisterRemoteVolume(m_indexvolume.RemoteFilename, RemoteVolumeType.Index, RemoteVolumeState.Temporary, m_transaction);
}
var filterhandler = new FilterHandler(m_snapshot, m_attributeFilter, m_sourceFilter, m_filter, m_symlinkPolicy, m_options.HardlinkPolicy, m_result);
using(new Logging.Timer("BackupMainOperation"))
{
if (m_options.ChangedFilelist != null && m_options.ChangedFilelist.Length >= 1)
{
m_result.AddVerboseMessage("Processing supplied change list instead of enumerating filesystem");
m_result.OperationProgressUpdater.UpdatefileCount(m_options.ChangedFilelist.Length, 0, true);
foreach(var p in m_options.ChangedFilelist)
{
if (m_result.TaskControlRendevouz() == TaskControlState.Stop)
{
m_result.AddMessage("Stopping backup operation on request");
break;
}
FileAttributes fa = new FileAttributes();
try
{
fa = m_snapshot.GetAttributes(p);
}
catch (Exception ex)
{
m_result.AddWarning(string.Format("Failed to read attributes: {0}, message: {1}", p, ex.Message), ex);
}
if (filterhandler.AttributeFilter(null, p, fa))
{
try
{
this.HandleFilesystemEntry(p, fa);
}
catch (Exception ex)
{
m_result.AddWarning(string.Format("Failed to process element: {0}, message: {1}", p, ex.Message), ex);
}
}
}
m_database.AppendFilesFromPreviousSet(m_transaction, m_options.DeletedFilelist);
}
else
{
foreach(var path in m_snapshot.EnumerateFilesAndFolders(filterhandler.AttributeFilter))
{
if (m_result.TaskControlRendevouz() == TaskControlState.Stop)
{
m_result.AddMessage("Stopping backup operation on request");
break;
}
this.HandleFilesystemEntry(path, m_snapshot.GetAttributes(path));
}
}
//If the scanner is still running for some reason, make sure we kill it now
if (parallelScanner != null && parallelScanner.IsAlive)
parallelScanner.Abort();
// We no longer need to snapshot active
try { m_snapshot.Dispose(); }
finally { m_snapshot = null; }
m_result.OperationProgressUpdater.UpdatefileCount(m_result.ExaminedFiles, m_result.SizeOfExaminedFiles, true);
}
m_result.OperationProgressUpdater.UpdatePhase(OperationPhase.Backup_Finalize);
using(new Logging.Timer("FinalizeRemoteVolumes"))
{
if (m_blockvolume.SourceSize > 0)
{
lastVolumeSize = m_blockvolume.SourceSize;
if (m_options.Dryrun)
{
m_result.AddDryrunMessage(string.Format("Would upload block volume: {0}, size: {1}", m_blockvolume.RemoteFilename, Library.Utility.Utility.FormatSizeString(new FileInfo(m_blockvolume.LocalFilename).Length)));
if (m_indexvolume != null)
{
m_blockvolume.Close();
UpdateIndexVolume();
m_indexvolume.FinishVolume(Library.Utility.Utility.CalculateHash(m_blockvolume.LocalFilename), new FileInfo(m_blockvolume.LocalFilename).Length);
m_result.AddDryrunMessage(string.Format("Would upload index volume: {0}, size: {1}", m_indexvolume.RemoteFilename, Library.Utility.Utility.FormatSizeString(new FileInfo(m_indexvolume.LocalFilename).Length)));
}
m_blockvolume.Dispose();
m_blockvolume = null;
m_indexvolume.Dispose();
m_indexvolume = null;
}
else
{
m_database.UpdateRemoteVolume(m_blockvolume.RemoteFilename, RemoteVolumeState.Uploading, -1, null, m_transaction);
m_blockvolume.Close();
UpdateIndexVolume();
using(new Logging.Timer("CommitUpdateRemoteVolume"))
m_transaction.Commit();
m_transaction = m_database.BeginTransaction();
m_backend.Put(m_blockvolume, m_indexvolume);
m_blockvolume = null;
m_indexvolume = null;
}
}
else
{
m_database.RemoveRemoteVolume(m_blockvolume.RemoteFilename, m_transaction);
if (m_indexvolume != null)
m_database.RemoveRemoteVolume(m_indexvolume.RemoteFilename, m_transaction);
}
}
using(new Logging.Timer("UpdateChangeStatistics"))
m_database.UpdateChangeStatistics(m_result);
using(new Logging.Timer("VerifyConsistency"))
m_database.VerifyConsistency(m_transaction);
var changeCount =
m_result.AddedFiles + m_result.ModifiedFiles + m_result.DeletedFiles +
m_result.AddedFolders + m_result.ModifiedFolders + m_result.DeletedFolders +
m_result.AddedSymlinks + m_result.ModifiedSymlinks + m_result.DeletedSymlinks;
//Changes in the filelist triggers a filelist upload
if (m_options.UploadUnchangedBackups || changeCount > 0)
{
using(new Logging.Timer("Uploading a new fileset"))
{
if (!string.IsNullOrEmpty(m_options.ControlFiles))
foreach(var p in m_options.ControlFiles.Split(new char[] { System.IO.Path.PathSeparator }, StringSplitOptions.RemoveEmptyEntries))
m_filesetvolume.AddControlFile(p, m_options.GetCompressionHintFromFilename(p));
m_database.WriteFileset(m_filesetvolume, m_transaction);
m_filesetvolume.Close();
if (m_options.Dryrun)
m_result.AddDryrunMessage(string.Format("Would upload fileset volume: {0}, size: {1}", m_filesetvolume.RemoteFilename, Library.Utility.Utility.FormatSizeString(new FileInfo(m_filesetvolume.LocalFilename).Length)));
else
{
m_database.UpdateRemoteVolume(m_filesetvolume.RemoteFilename, RemoteVolumeState.Uploading, -1, null, m_transaction);
using(new Logging.Timer("CommitUpdateRemoteVolume"))
m_transaction.Commit();
m_transaction = m_database.BeginTransaction();
m_backend.Put(m_filesetvolume);
}
}
}
else
{
m_result.AddVerboseMessage("removing temp files, as no data needs to be uploaded");
m_database.RemoveRemoteVolume(m_filesetvolume.RemoteFilename, m_transaction);
}
m_result.OperationProgressUpdater.UpdatePhase(OperationPhase.Backup_WaitForUpload);
using(new Logging.Timer("Async backend wait"))
m_backend.WaitForComplete(m_database, m_transaction);
if (m_result.TaskControlRendevouz() != TaskControlState.Stop)
{
if (m_options.KeepTime.Ticks > 0 || m_options.KeepVersions != 0)
{
m_result.OperationProgressUpdater.UpdatePhase(OperationPhase.Backup_Delete);
m_result.DeleteResults = new DeleteResults(m_result);
using(var db = new LocalDeleteDatabase(m_database))
new DeleteHandler(m_backend.BackendUrl, m_options, (DeleteResults)m_result.DeleteResults).DoRun(db, m_transaction, true, lastVolumeSize <= m_options.SmallFileSize);
}
else if (lastVolumeSize <= m_options.SmallFileSize && !m_options.NoAutoCompact)
{
m_result.OperationProgressUpdater.UpdatePhase(OperationPhase.Backup_Compact);
m_result.CompactResults = new CompactResults(m_result);
using(var db = new LocalDeleteDatabase(m_database))
new CompactHandler(m_backend.BackendUrl, m_options, (CompactResults)m_result.CompactResults).DoCompact(db, true, m_transaction);
}
}
if (m_options.UploadVerificationFile)
{
m_result.OperationProgressUpdater.UpdatePhase(OperationPhase.Backup_VerificationUpload);
FilelistProcessor.UploadVerificationFile(m_backend.BackendUrl, m_options, m_result.BackendWriter, m_database, m_transaction);
}
if (m_options.Dryrun)
{
m_transaction.Rollback();
m_transaction = null;
}
else
{
using(new Logging.Timer("CommitFinalizingBackup"))
m_transaction.Commit();
m_transaction = null;
m_database.Vacuum();
if (m_result.TaskControlRendevouz() != TaskControlState.Stop && !m_options.NoBackendverification)
{
m_result.OperationProgressUpdater.UpdatePhase(OperationPhase.Backup_PostBackupVerify);
using(var backend = new BackendManager(m_backendurl, m_options, m_result.BackendWriter, m_database))
{
using(new Logging.Timer("AfterBackupVerify"))
FilelistProcessor.VerifyRemoteList(backend, m_options, m_database, m_result.BackendWriter);
backend.WaitForComplete(m_database, null);
}
if (m_options.BackupTestSampleCount > 0 && m_database.GetRemoteVolumes().Count() > 0)
{
m_result.OperationProgressUpdater.UpdatePhase(OperationPhase.Backup_PostBackupTest);
m_result.TestResults = new TestResults(m_result);
using(var testdb = new LocalTestDatabase(m_database))
using(var backend = new BackendManager(m_backendurl, m_options, m_result.BackendWriter, testdb))
new TestHandler(m_backendurl, m_options, new TestResults(m_result))
.DoRun(m_options.BackupTestSampleCount, testdb, backend);
}
}
}
m_result.OperationProgressUpdater.UpdatePhase(OperationPhase.Backup_Complete);
m_database.WriteResults();
return;
}
}
catch (Exception ex)
{
m_result.AddError("Fatal error", ex);
throw;
}
finally
{
if (parallelScanner != null && parallelScanner.IsAlive)
{
parallelScanner.Abort();
parallelScanner.Join(500);
if (parallelScanner.IsAlive)
m_result.AddWarning("Failed to terminate filecounter thread", null);
}
if (m_snapshot != null)
try { m_snapshot.Dispose(); }
catch (Exception ex) { m_result.AddError(string.Format("Failed to dispose snapshot"), ex); }
finally { m_snapshot = null; }
if (m_transaction != null)
try { m_transaction.Rollback(); }
catch (Exception ex) { m_result.AddError(string.Format("Rollback error: {0}", ex.Message), ex); }
}
}
}
private async Task RunAsync(string[] sources, Library.Utility.IFilter filter)
{
m_result.OperationProgressUpdater.UpdatePhase(OperationPhase.Backup_Begin);
// New isolated scope for each operation
using (new IsolatedChannelScope())
using (m_database = new LocalBackupDatabase(m_options.Dbpath, m_options))
{
m_result.SetDatabase(m_database);
m_result.Dryrun = m_options.Dryrun;
// Check the database integrity
Utility.UpdateOptionsFromDb(m_database, m_options);
Utility.VerifyParameters(m_database, m_options);
var probe_path = m_database.GetFirstPath();
if (probe_path != null && Duplicati.Library.Utility.Utility.GuessDirSeparator(probe_path) != System.IO.Path.DirectorySeparatorChar.ToString())
{
throw new UserInformationException(string.Format("The backup contains files that belong to another operating system. Proceeding with a backup would cause the database to contain paths from two different operation systems, which is not supported. To proceed without losing remote data, delete all filesets and make sure the --{0} option is set, then run the backup again to re-use the existing data on the remote store.", "no-auto-compact"), "CrossOsDatabaseReuseNotSupported");
}
if (m_database.PartiallyRecreated)
{
throw new UserInformationException("The database was only partially recreated. This database may be incomplete and the repair process is not allowed to alter remote files as that could result in data loss.", "DatabaseIsPartiallyRecreated");
}
if (m_database.RepairInProgress)
{
throw new UserInformationException("The database was attempted repaired, but the repair did not complete. This database may be incomplete and the backup process cannot continue. You may delete the local database and attempt to repair it again.", "DatabaseRepairInProgress");
}
// If there is no filter, we set an empty filter to simplify the code
// If there is a filter, we make sure that the sources are included
m_filter = filter ?? new Library.Utility.FilterExpression();
m_sourceFilter = new Library.Utility.FilterExpression(sources, true);
Task parallelScanner = null;
Task uploader = null;
try
{
// Setup runners and instances here
using (var db = new Backup.BackupDatabase(m_database, m_options))
using (var backend = new BackendManager(m_backendurl, m_options, m_result.BackendWriter, m_database))
using (var filesetvolume = new FilesetVolumeWriter(m_options, m_database.OperationTimestamp))
using (var stats = new Backup.BackupStatsCollector(m_result))
using (var bk = new Common.BackendHandler(m_options, m_backendurl, db, stats, m_result.TaskReader))
// Keep a reference to these channels to avoid shutdown
using (var uploadtarget = ChannelManager.GetChannel(Backup.Channels.BackendRequest.ForWrite))
{
long filesetid;
var counterToken = new CancellationTokenSource();
using (var snapshot = GetSnapshot(sources, m_options))
{
try
{
// Start parallel scan, or use the database
if (m_options.DisableFileScanner)
{
var d = m_database.GetLastBackupFileCountAndSize();
m_result.OperationProgressUpdater.UpdatefileCount(d.Item1, d.Item2, true);
}
else
{
parallelScanner = Backup.CountFilesHandler.Run(sources, snapshot, m_result, m_options, m_sourceFilter, m_filter, m_result.TaskReader, counterToken.Token);
}
// Make sure the database is sane
await db.VerifyConsistencyAsync(m_options.Blocksize, m_options.BlockhashSize, true);
// Start the uploader process
uploader = Backup.BackendUploader.Run(bk, m_options, db, m_result, m_result.TaskReader, stats);
// If we have an interrupted backup, grab the
string lasttempfilelist = null;
long lasttempfileid = -1;
if (!m_options.DisableSyntheticFilelist)
{
var candidates = (await db.GetIncompleteFilesetsAsync()).OrderBy(x => x.Value).ToArray();
if (candidates.Length > 0)
{
lasttempfileid = candidates.Last().Key;
lasttempfilelist = m_database.GetRemoteVolumeFromID(lasttempfileid).Name;
}
}
// TODO: Rewrite to using the uploader process, or the BackendHandler interface
// Do a remote verification, unless disabled
PreBackupVerify(backend, lasttempfilelist);
// If the previous backup was interrupted, send a synthetic list
await Backup.UploadSyntheticFilelist.Run(db, m_options, m_result, m_result.TaskReader, lasttempfilelist, lasttempfileid);
// Grab the previous backup ID, if any
var prevfileset = m_database.FilesetTimes.FirstOrDefault();
if (prevfileset.Value.ToUniversalTime() > m_database.OperationTimestamp.ToUniversalTime())
{
throw new Exception(string.Format("The previous backup has time {0}, but this backup has time {1}. Something is wrong with the clock.", prevfileset.Value.ToLocalTime(), m_database.OperationTimestamp.ToLocalTime()));
}
var lastfilesetid = prevfileset.Value.Ticks == 0 ? -1 : prevfileset.Key;
// Rebuild any index files that are missing
await Backup.RecreateMissingIndexFiles.Run(db, m_options, m_result, m_result.TaskReader);
// This should be removed as the lookups are no longer used
m_database.BuildLookupTable(m_options);
// Prepare the operation by registering the filelist
m_result.OperationProgressUpdater.UpdatePhase(OperationPhase.Backup_ProcessingFiles);
var repcnt = 0;
while (repcnt < 100 && await db.GetRemoteVolumeIDAsync(filesetvolume.RemoteFilename) >= 0)
{
filesetvolume.ResetRemoteFilename(m_options, m_database.OperationTimestamp.AddSeconds(repcnt++));
}
if (await db.GetRemoteVolumeIDAsync(filesetvolume.RemoteFilename) >= 0)
{
throw new Exception("Unable to generate a unique fileset name");
}
var filesetvolumeid = await db.RegisterRemoteVolumeAsync(filesetvolume.RemoteFilename, RemoteVolumeType.Files, RemoteVolumeState.Temporary);
filesetid = await db.CreateFilesetAsync(filesetvolumeid, VolumeBase.ParseFilename(filesetvolume.RemoteFilename).Time);
// create USN-based scanner if enabled
var journalService = GetJournalService(sources, snapshot, filter, lastfilesetid);
// Run the backup operation
if (await m_result.TaskReader.ProgressAsync)
{
await RunMainOperation(sources, snapshot, journalService, db, stats, m_options, m_sourceFilter, m_filter, m_result, m_result.TaskReader, lastfilesetid).ConfigureAwait(false);
}
}
finally
{
//If the scanner is still running for some reason, make sure we kill it now
counterToken.Cancel();
}
}
// Ensure the database is in a sane state after adding data
using (new Logging.Timer(LOGTAG, "VerifyConsistency", "VerifyConsistency"))
await db.VerifyConsistencyAsync(m_options.Blocksize, m_options.BlockhashSize, false);
// Send the actual filelist
if (await m_result.TaskReader.ProgressAsync)
{
await Backup.UploadRealFilelist.Run(m_result, db, m_options, filesetvolume, filesetid, m_result.TaskReader);
}
// Wait for upload completion
m_result.OperationProgressUpdater.UpdatePhase(OperationPhase.Backup_WaitForUpload);
var lastVolumeSize = await FlushBackend(m_result, uploadtarget, uploader).ConfigureAwait(false);
// Make sure we have the database up-to-date
await db.CommitTransactionAsync("CommitAfterUpload", false);
// TODO: Remove this later
m_transaction = m_database.BeginTransaction();
if (await m_result.TaskReader.ProgressAsync)
{
CompactIfRequired(backend, lastVolumeSize);
}
if (m_options.UploadVerificationFile && await m_result.TaskReader.ProgressAsync)
{
m_result.OperationProgressUpdater.UpdatePhase(OperationPhase.Backup_VerificationUpload);
FilelistProcessor.UploadVerificationFile(backend.BackendUrl, m_options, m_result.BackendWriter, m_database, m_transaction);
}
if (m_options.Dryrun)
{
m_transaction.Rollback();
m_transaction = null;
}
else
{
using (new Logging.Timer(LOGTAG, "CommitFinalizingBackup", "CommitFinalizingBackup"))
m_transaction.Commit();
m_transaction = null;
if (m_result.TaskControlRendevouz() != TaskControlState.Stop)
{
if (m_options.NoBackendverification)
{
UpdateStorageStatsFromDatabase();
}
else
{
PostBackupVerification();
}
}
}
m_database.WriteResults();
m_database.PurgeLogData(m_options.LogRetention);
if (m_options.AutoVacuum)
{
m_database.Vacuum();
}
m_result.OperationProgressUpdater.UpdatePhase(OperationPhase.Backup_Complete);
return;
}
}
catch (Exception ex)
{
var aex = BuildException(ex, uploader, parallelScanner);
Logging.Log.WriteErrorMessage(LOGTAG, "FatalError", ex, "Fatal error");
if (aex == ex)
{
throw;
}
throw aex;
}
finally
{
if (parallelScanner != null && !parallelScanner.IsCompleted)
{
parallelScanner.Wait(500);
}
// TODO: We want to commit? always?
if (m_transaction != null)
{
try { m_transaction.Rollback(); }
catch (Exception ex) { Logging.Log.WriteErrorMessage(LOGTAG, "RollbackError", ex, "Rollback error: {0}", ex.Message); }
}
}
}
}
public void Run(string[] sources, Library.Utility.IFilter filter)
{
m_result.OperationProgressUpdater.UpdatePhase(OperationPhase.Backup_Begin);
using(m_database = new LocalBackupDatabase(m_options.Dbpath, m_options))
{
m_result.SetDatabase(m_database);
m_result.Dryrun = m_options.Dryrun;
Utility.UpdateOptionsFromDb(m_database, m_options);
Utility.VerifyParameters(m_database, m_options);
if (m_database.RepairInProgress)
throw new Exception("The database was attempted repaired, but the repair did not complete. This database may be incomplete and the backup process cannot continue. You may delete the local database and attempt to repair it again.");
m_blocksize = m_options.Blocksize;
m_blockbuffer = new byte[m_options.Blocksize * Math.Max(1, m_options.FileReadBufferSize / m_options.Blocksize)];
m_blocklistbuffer = new byte[m_options.Blocksize];
m_blockhasher = System.Security.Cryptography.HashAlgorithm.Create(m_options.BlockHashAlgorithm);
m_filehasher = System.Security.Cryptography.HashAlgorithm.Create(m_options.FileHashAlgorithm);
if (m_blockhasher == null)
throw new Exception(Strings.Common.InvalidHashAlgorithm(m_options.BlockHashAlgorithm));
if (m_filehasher == null)
throw new Exception(Strings.Common.InvalidHashAlgorithm(m_options.FileHashAlgorithm));
if (!m_blockhasher.CanReuseTransform)
throw new Exception(Strings.Common.InvalidCryptoSystem(m_options.BlockHashAlgorithm));
if (!m_filehasher.CanReuseTransform)
throw new Exception(Strings.Common.InvalidCryptoSystem(m_options.FileHashAlgorithm));
m_database.VerifyConsistency(null, m_options.Blocksize, m_options.BlockhashSize);
// If there is no filter, we set an empty filter to simplify the code
// If there is a filter, we make sure that the sources are included
m_filter = filter ?? new Library.Utility.FilterExpression();
m_sourceFilter = new Library.Utility.FilterExpression(sources, true);
m_backendLogFlushTimer = DateTime.Now.Add(FLUSH_TIMESPAN);
System.Threading.Thread parallelScanner = null;
try
{
using(var backend = new BackendManager(m_backendurl, m_options, m_result.BackendWriter, m_database))
using(var filesetvolume = new FilesetVolumeWriter(m_options, m_database.OperationTimestamp))
{
using(var snapshot = GetSnapshot(sources, m_options, m_result))
{
// Start parallel scan
if (m_options.ChangedFilelist == null || m_options.ChangedFilelist.Length < 1)
{
parallelScanner = new System.Threading.Thread(CountFilesThread) {
Name = "Read ahead file counter",
IsBackground = true
};
parallelScanner.Start(snapshot);
}
PreBackupVerify(backend);
// Verify before uploading a synthetic list
m_database.VerifyConsistency(null, m_options.Blocksize, m_options.BlockhashSize);
UploadSyntheticFilelist(backend);
m_database.BuildLookupTable(m_options);
m_transaction = m_database.BeginTransaction();
var repcnt = 0;
while(repcnt < 100 && m_database.GetRemoteVolumeID(filesetvolume.RemoteFilename) >= 0)
filesetvolume.ResetRemoteFilename(m_options, m_database.OperationTimestamp.AddSeconds(repcnt++));
if (m_database.GetRemoteVolumeID(filesetvolume.RemoteFilename) >= 0)
throw new Exception("Unable to generate a unique fileset name");
m_result.OperationProgressUpdater.UpdatePhase(OperationPhase.Backup_ProcessingFiles);
var filesetvolumeid = m_database.RegisterRemoteVolume(filesetvolume.RemoteFilename, RemoteVolumeType.Files, RemoteVolumeState.Temporary, m_transaction);
m_database.CreateFileset(filesetvolumeid, VolumeBase.ParseFilename(filesetvolume.RemoteFilename).Time, m_transaction);
RunMainOperation(snapshot, backend);
//If the scanner is still running for some reason, make sure we kill it now
if (parallelScanner != null && parallelScanner.IsAlive)
parallelScanner.Abort();
}
var lastVolumeSize = FinalizeRemoteVolumes(backend);
using(new Logging.Timer("UpdateChangeStatistics"))
m_database.UpdateChangeStatistics(m_result);
using(new Logging.Timer("VerifyConsistency"))
m_database.VerifyConsistency(m_transaction, m_options.Blocksize, m_options.BlockhashSize);
UploadRealFileList(backend, filesetvolume);
m_result.OperationProgressUpdater.UpdatePhase(OperationPhase.Backup_WaitForUpload);
using(new Logging.Timer("Async backend wait"))
backend.WaitForComplete(m_database, m_transaction);
if (m_result.TaskControlRendevouz() != TaskControlState.Stop)
CompactIfRequired(backend, lastVolumeSize);
if (m_options.UploadVerificationFile)
{
m_result.OperationProgressUpdater.UpdatePhase(OperationPhase.Backup_VerificationUpload);
FilelistProcessor.UploadVerificationFile(backend.BackendUrl, m_options, m_result.BackendWriter, m_database, m_transaction);
}
if (m_options.Dryrun)
{
m_transaction.Rollback();
m_transaction = null;
}
else
{
using(new Logging.Timer("CommitFinalizingBackup"))
m_transaction.Commit();
m_transaction = null;
m_database.Vacuum();
if (m_result.TaskControlRendevouz() != TaskControlState.Stop && !m_options.NoBackendverification)
{
PostBackupVerification();
}
}
m_result.OperationProgressUpdater.UpdatePhase(OperationPhase.Backup_Complete);
m_database.WriteResults();
m_database.PurgeLogData(m_options.LogRetention);
return;
}
}
catch (Exception ex)
{
m_result.AddError("Fatal error", ex);
throw;
}
finally
{
if (parallelScanner != null && parallelScanner.IsAlive)
{
parallelScanner.Abort();
parallelScanner.Join(500);
if (parallelScanner.IsAlive)
m_result.AddWarning("Failed to terminate filecounter thread", null);
}
if (m_transaction != null)
try { m_transaction.Rollback(); }
catch (Exception ex) { m_result.AddError(string.Format("Rollback error: {0}", ex.Message), ex); }
}
}
}