protected override void CreateQuery(VLayoutPanel vPanel)
{
var layoutManager = new LayoutManager("", mDFInfo, mQueryContainer);
layoutManager.Add("存货属性分类", new SimpleLabel("属性分类"), QueryCreator.DFChoiceBox(mDFInfo.Fields["ID"], B3UnitedInfosConsts.DataSources.存货属性分类));
layoutManager.Add("ProductLine_ID", mQueryContainer.Add(QueryCreator.DFChoiceBox(mDFInfo.Fields["ProductLine_ID"], B3UnitedInfosConsts.DataSources.产品线全部), "ProductLine_ID"));
layoutManager["ProductLine_ID"].NotAutoAddToContainer = true;
var config = new AutoLayoutConfig {
Cols = 8, DefaultLabelWidth = 4
};
config.Add("Name");
config.Add("Spec");
config.Add("Code");
config.Add("GoodsProperty_ID");
config.Add("存货属性分类");
config.Add("ProductLine_ID");
layoutManager.Config = config;
var section = mPageLayoutManager.AddSection(B3FrameworksConsts.PageLayouts.QueryConditions, B3FrameworksConsts.PageLayouts.QueryConditions_DisplayName);
section.ApplyLayout(layoutManager, config, mPageLayoutManager, mDFInfo as DFInfo);
vPanel.Add(layoutManager.CreateLayout());
base.CreateQuery(vPanel);
}
private void AddQueryControl(VLayoutPanel vPanel)
{
var mDFInfo = DFInfo.Get(typeof(Goods_Accounting_Store));
var manager = new LayoutManager("", mDFInfo, _mQueryContainer);
manager.Add("Goods_ID", QueryCreator.DFChoiceBox(mDFInfo.Fields["Goods_ID"], B3UnitedInfosConsts.DataSources.存货全部));
manager.Add("Store_ID", QueryCreator.DFChoiceBox(mDFInfo.Fields["Store_ID"], B3FrameworksConsts.DataSources.授权仓库));
manager.Add("AccountingUnit_ID", QueryCreator.DFChoiceBox(mDFInfo.Fields["AccountingUnit_ID"], B3FrameworksConsts.DataSources.授权会计单位));
manager.Add("GoodsPropertyCatalog_ID", new SimpleLabel("存货属性分类"), _goodsPropertyCatalogBox = QueryCreator.DFChoiceBox(mDFInfo.Fields["AccountingUnit_ID"], B3UnitedInfosConsts.DataSources.存货属性分类));
manager.Add("GoodsProperty_ID", new SimpleLabel("存货属性"), QueryCreator.DFChoiceBox(mDFInfo.Fields["AccountingUnit_ID"], B3UnitedInfosConsts.DataSources.存货属性全部));
var config = new AutoLayoutConfig
{
Cols = 8,
DefaultLabelWidth = 4,
};
config.Add("Goods_ID");
config.Add("Store_ID");
config.Add("AccountingUnit_ID");
config.Add("GoodsPropertyCatalog_ID");
config.Add("GoodsProperty_ID");
manager.Config = config;
vPanel.Add(manager.CreateLayout());
var hPanel = vPanel.Add(new HLayoutPanel());
hPanel.Add(new TSButton("开始查询", delegate { StartQuery(); }));
hPanel.Add(new RedirectTSButton("清除条件"));
}
protected override void BuildBody(Control container)
{
var layoutManager = new LayoutManager("main", mDFInfo, mDFContainer);
layoutManager.Add("Time", new DFDateInput());
var planNumberBox = InputCreator.DFChoiceBox(B3ButcheryDataSource.计划号, "PlanNumber_Name", true);
layoutManager.Add("PlanNumber_ID", planNumberBox);
var config = new AutoLayoutConfig();
config.Add("Time");
config.Add("PlanNumber_ID");
config.Add("AccountingUnit_ID");
config.Add("Department_ID");
config.Add("ProductionUnit_ID");
config.Add("Employee_ID");
config.Add("ProductLinks_ID");
config.Add("FrozenStore_ID");
AddProductLinkTemplate(layoutManager, config);
layoutManager.Config = config;
container.Controls.Add(layoutManager.CreateLayout());
var vPanel = container.EAdd(new VLayoutPanel());
CreateOutputDetailPanel(vPanel);
}
protected override void AddQueryControls(VLayoutPanel vPanel)
{
var customPanel = new LayoutManager("Main", _mainInfo, mQueryContainer);
auuInput = customPanel.Add("AccountingUnit_ID", QueryCreator.DFChoiceBoxEnableMultiSelection(_mainInfo.Fields["AccountingUnit_ID"], mQueryContainer, "AccountingUnit_ID", B3FrameworksConsts.DataSources.授权会计单位全部));
customPanel["AccountingUnit_ID"].NotAutoAddToContainer = true;
departInput = customPanel.Add("Department_ID", QueryCreator.DFChoiceBoxEnableMultiSelection(_mainInfo.Fields["Department_ID"], mQueryContainer, "Department_ID", B3FrameworksConsts.DataSources.授权部门全部));
customPanel["Department_ID"].NotAutoAddToContainer = true;
customPanel.Add("Goods_ID", new SimpleLabel("产出单存货"), goodInput = QueryCreator.DFChoiceBoxEnableMultiSelection(_detailInfo.Fields["Goods_ID"], mQueryContainer, "Goods_ID", B3UnitedInfosConsts.DataSources.存货));
customPanel["Goods_ID"].NotAutoAddToContainer = true;
var config = customPanel.CreateDefaultConfig(2);
config.Expand = false;
var section = mPageLayoutManager.AddSection("查询条件", "查询条件");
section.ApplyLayout(customPanel, config, mPageLayoutManager, _mainInfo);
section.SetDisplayName("AccountingUnit_ID", "会计单位");
section.SetDisplayName("Department_ID", "部门");
section.SetDisplayName("Goods_ID", "产出单存货");
vPanel.Add(customPanel.CreateLayout(), new VLayoutOption(HorizontalAlign.Left));
//vPanel.Add(customPanel.CreateLayout());
}
protected override void BuildBasePropertiesEditor(TitlePanel titlePanel, PageLayoutSection pageLayoutSection)
{
var layoutManager = new LayoutManager("", mDFInfo, mDFContainer);
layoutManager.Add("PlantCode", InputCreator.DFMemo("厂家标识"));
layoutManager.Add("CustomTaxRate", new DFValueLabel(mDFInfo.Fields["CustomTaxRate"]));
var config = new AutoLayoutConfig();
if (IsNewDialog)
{
config.Add("Goods_Name");
}
else
{
config.Add("Goods_ID");
}
config.Add("Goods_Code");
config.Add("Name");
config.Add("ProductionDate");
config.Add("InStoreDate");
config.Add("InStorePrice");
config.Add("PlantCode");
config.Add("Remark");
config.Add("CustomTaxRate");
pageLayoutSection.SetRequired("Goods_ID", "Name");
pageLayoutSection.ApplyLayout(layoutManager, config, mPageLayoutManager, mDFInfo);
layoutManager.Config = config;
titlePanel.Controls.Add(layoutManager.CreateLayout());
}
protected override void AddQueryControls(VLayoutPanel vPanel)
{
var customPanel = new LayoutManager("Main", _mainInfo, mQueryContainer);
customPanel.Add("ID", QueryCreator.DFChoiceBoxEnableMultiSelection(_mainInfo.Fields["ID"], mQueryContainer, "ID", B3ButcheryDataSource.生产通知单ID));
customPanel["ID"].NotAutoAddToContainer = true;
customPanel.Add("BillState", QueryCreator.一般单据状态(_mainInfo.Fields["BillState"]));
customPanel.Add("AccountingUnit_ID", QueryCreator.DFChoiceBoxEnableMultiSelection(_mainInfo.Fields["AccountingUnit_ID"], mQueryContainer, "AccountingUnit_ID", B3FrameworksConsts.DataSources.授权会计单位全部));
customPanel["AccountingUnit_ID"].NotAutoAddToContainer = true;
customPanel.Add("Department_ID", QueryCreator.DFChoiceBoxEnableMultiSelection(_mainInfo.Fields["Department_ID"], mQueryContainer, "Department_ID", B3FrameworksConsts.DataSources.授权部门全部));
customPanel["Department_ID"].NotAutoAddToContainer = true;
customPanel.Add("Customer_ID", QueryCreator.DFChoiceBoxEnableMultiSelection(_mainInfo.Fields["Customer_ID"], mQueryContainer, "Customer_ID", "B3Sale_客户全部"));
customPanel["Customer_ID"].NotAutoAddToContainer = true;
customPanel.Add("ProductionUnit_ID", QueryCreator.DFChoiceBoxEnableMultiSelection(_mainInfo.Fields["ProductionUnit_ID"], mQueryContainer, "ProductionUnit_ID", B3ProduceUnitedInfosDataSources.生产单位全部));
customPanel["ProductionUnit_ID"].NotAutoAddToContainer = true;
customPanel.Add("Employee_ID", QueryCreator.DFChoiceBoxEnableMultiSelection(_mainInfo.Fields["Employee_ID"], mQueryContainer, "Employee_ID", B3FrameworksConsts.DataSources.授权员工全部));
customPanel["Employee_ID"].NotAutoAddToContainer = true;
AddQueryControlsByBrandItem_ID(customPanel, _detailInfo);
customPanel.Add("Goods_ID", new SimpleLabel("存货"), QueryCreator.DFChoiceBoxEnableMultiSelection(_detailInfo.Fields["Goods_ID"], mQueryContainer, "Goods_ID", B3UnitedInfosConsts.DataSources.存货));
customPanel["Goods_ID"].NotAutoAddToContainer = true;
摘要 = new DFTextBox(_mainInfo.Fields["Remark"]);
备注 = new DFTextBox(_detailInfo.Fields["Remark"]);
customPanel.Add("摘要", new SimpleLabel("摘要"), 摘要);
customPanel.Add("备注", new SimpleLabel("备注"), 备注);
customPanel.CreateDefaultConfig(2).Expand = false;
vPanel.Add(customPanel.CreateLayout());
}
protected override void BuildBasePropertiesEditor(TitlePanel titlePanel, PageLayoutSection pageLayoutSection)
{
var layoutManager = new LayoutManager("", mDFInfo, mDFContainer);
if (mMinGoodsProperty != null)
{
if (!string.IsNullOrEmpty(mMinGoodsProperty.GoodsCodeRole))
{
layoutManager.Add("Code", new DFValueLabel());
}
if (!string.IsNullOrEmpty(mMinGoodsProperty.GoodsNameRole))
{
layoutManager.Add("Name", new DFValueLabel());
}
}
var config = new AutoLayoutConfig();
layoutManager.Config = config;
config.Add("GoodsProperty_ID");
config.Add("GoodsCategory_ID");
config.Add("Name");
config.Add("PrintShortName");
config.Add("Code");
config.Add("Spec");
config.Add("Feature");
config.Add("Origin");
config.Add("Brand");
config.Add("ProductLine_ID");
config.Add("TaxRate");
config.Add("MainUnit");
config.Add("SecondUnit");
config.Add("MainUnitRatio");
config.Add("SecondUnitRatio");
config.Add("UnitConvertDirection");
config.Add("Barcode");
config.Add("OuterCode");
config.Add("SecondUnitII");
config.Add("SecondUnitII_MainUnitRatio");
config.Add("SecondUnitII_SecondUnitRatio");
config.Add("StandPlateNumber");
config.Add("StandardSecondNumber");
config.Add("IsSemiGoods");
config.Add("ProductShift_ID");
config.Add("PackageModel");
config.Add("Remark");
pageLayoutSection.SetRequired("GoodsProperty_ID", "Name", "Code");
pageLayoutSection.ApplyLayout(layoutManager, config, mPageLayoutManager, mDFInfo);
titlePanel.Controls.Add(layoutManager.CreateLayout());
}
protected override void AddQueryControls(VLayoutPanel vPanel)
{
var customPanel = new LayoutManager("Main", mainInfo, mQueryContainer);
//查询条件包括：：{日期}、{计划号}、{会计单位}、{部门}、{经办人}、{生产环节}、{存货名称}、{存货编码}，
customPanel.Add("ID", QueryCreator.DFTextBoxMultiSelect(mainInfo.Fields["ID"], mQueryContainer, "ID"));
customPanel["ID"].NotAutoAddToContainer = true;
customPanel.Add("PlanNumber_ID", QueryCreator.DFChoiceBoxEnableMultiSelection(mainInfo.Fields["PlanNumber_ID"], mQueryContainer, "PlanNumber_ID", B3ButcheryDataSource.计划号));
customPanel["PlanNumber_ID"].NotAutoAddToContainer = true;
customPanel.Add("AccountingUnit_ID", QueryCreator.DFChoiceBoxEnableMultiSelection(mainInfo.Fields["AccountingUnit_ID"], mQueryContainer, "AccountingUnit_ID", DataKind.授权会计单位全部));
customPanel["AccountingUnit_ID"].NotAutoAddToContainer = true;
customPanel.Add("Department_ID", QueryCreator.DFChoiceBoxEnableMultiSelection(mainInfo.Fields["Department_ID"], mQueryContainer, "Department_ID", DataKind.授权部门全部));
customPanel["Department_ID"].NotAutoAddToContainer = true;
customPanel.Add("Employee_ID", QueryCreator.DFChoiceBoxEnableMultiSelection(mainInfo.Fields["Employee_ID"], mQueryContainer, "Employee_ID", DataKind.授权员工全部));
customPanel["Employee_ID"].NotAutoAddToContainer = true;
customPanel.Add("ProductLinks_ID", QueryCreator.DFChoiceBoxEnableMultiSelection(mainInfo.Fields["ProductLinks_ID"], mQueryContainer, "ProductLinks_ID", B3ButcheryDataSource.生产环节全部));
customPanel["ProductLinks_ID"].NotAutoAddToContainer = true;
customPanel.Add("ProductionUnit_ID", QueryCreator.DFChoiceBoxEnableMultiSelection(mainInfo.Fields["ProductionUnit_ID"], mQueryContainer, "ProductionUnit_ID", B3ProduceUnitedInfosDataSources.生产单位全部));
customPanel["ProductionUnit_ID"].NotAutoAddToContainer = true;
customPanel.Add("AccountingUnit_Name", new SimpleLabel("存货名称"), goodsName = QueryCreator.DFTextBox(detailInfo.Fields["Goods_Name"]));
customPanel.Add("Department_Name", new SimpleLabel("存货编号"), goodsCode = QueryCreator.DFTextBox(detailInfo.Fields["Goods_Code"]));
customPanel.CreateDefaultConfig(2).Expand = false;
vPanel.Add(customPanel.CreateLayout());
}
protected override void AddQueryControls(VLayoutPanel vPanel)
{
var customPanel = new LayoutManager("Main", mainInfo, mQueryContainer);
customPanel.Add("PlanNumber_ID", QueryCreator.DFChoiceBoxEnableMultiSelection(mainInfo.Fields["PlanNumber_ID"], mQueryContainer, "PlanNumber_ID", B3ButcheryDataSource.计划号));
customPanel["PlanNumber_ID"].NotAutoAddToContainer = true;
customPanel.Add("AccountingUnit_ID", QueryCreator.DFChoiceBoxEnableMultiSelection(mainInfo.Fields["AccountingUnit_ID"], mQueryContainer, "AccountingUnit_ID", DataKind.授权会计单位全部));
customPanel["AccountingUnit_ID"].NotAutoAddToContainer = true;
customPanel.CreateDefaultConfig(2).Expand = false;
vPanel.Add(customPanel.CreateLayout());
}
protected override void BuildBody(Control container)
{
var layoutManager = new LayoutManager("main", mDFInfo, mDFContainer);
var planNumberBox = layoutManager.Add("PlanNumber_ID", InputCreator.DFChoiceBox(B3ButcheryDataSource.计划号, "PlanNumber_Name"));
planNumberBox.OnBeforeDrop = "this.argument2=__DFContainer.getControl('Date').value";
var config = new AutoLayoutConfig();
config.Add("Date");
config.Add("AccountingUnit_ID");
config.Add("Department_ID");
config.Add("PlanNumber_ID");
config.Add("Remark");
layoutManager.Config = config;
container.Controls.Add(layoutManager.CreateLayout());
var vPanel = container.EAdd(new VLayoutPanel());
if (CanSave)
{
vPanel.Add(new TSButton("载入明细", delegate
{
LoadDetail();
}), new VLayoutOption(HorizontalAlign.Left));
}
CreateInputDetailPanel(vPanel);
CreateOutputDetailPanel(vPanel);
}
protected override void BuildBody(Control container)
{
var mainInfo = container.EAdd(new TitlePanel("基本信息"));
var layoutManager = new LayoutManager("main", mDFInfo, mDFContainer);
layoutManager.Add("ProductPlan_ID", InputCreator.DFChoiceBox(B3ButcheryDataSource.计划号, "ProductPlan_Name"));
var config = new AutoLayoutConfig();
config.Add("AccountingUnit_ID");
config.Add("Department_ID");
config.Add("Employee_ID");
config.Add("Store_ID");
config.Add("InStoreType_ID");
config.Add("InStoreDate");
config.Add("CheckEmployee_ID");
config.Add("CheckDate");
config.Add("ProductPlan_ID");
layoutManager.Config = config;
var section = mPageLayoutManager.AddSection("BaseProperties", "基本属性");
section.ApplyLayout(layoutManager, config, mPageLayoutManager, mDFInfo);
mainInfo.Controls.Add(layoutManager.CreateLayout());
mainInfo.SetPageLayoutSetting(mPageLayoutManager, section.Name);
CreateDetailPanel(container.EAdd(new TitlePanel("明细信息")));
}
protected override void AddQueryControls(VLayoutPanel vPanel)
{
var customPanel = new LayoutManager("Main", mainInfo, mQueryContainer);
//查询条件包括：：{会计单位}、{计划号}、{存货名称}、{存货编码}
customPanel.Add("AccountingUnit_ID", QueryCreator.DFChoiceBoxEnableMultiSelection(mainInfo.Fields["AccountingUnit_ID"], mQueryContainer, "AccountingUnit_ID", DataKind.授权会计单位全部));
customPanel["AccountingUnit_ID"].NotAutoAddToContainer = true;
customPanel.Add("PlanNumber_ID", QueryCreator.DFChoiceBoxEnableMultiSelection(mainInfo.Fields["PlanNumber_ID"], mQueryContainer, "PlanNumber_ID", B3ButcheryDataSource.计划号));
customPanel["PlanNumber_ID"].NotAutoAddToContainer = true;
customPanel.Add("Goods_Name", new SimpleLabel("存货名称"), QueryCreator.DFTextBox(mainInfo.Fields["AccountingUnit_Name"]));
customPanel.Add("Goods_Code", new SimpleLabel("存货编号"), QueryCreator.DFTextBox(mainInfo.Fields["Department_Name"]));
customPanel.CreateDefaultConfig(2).Expand = false;
vPanel.Add(customPanel.CreateLayout());
}
protected override void AddQueryControls(VLayoutPanel vPanel)
{
var layout = new LayoutManager("Main", mDFInfo, mQueryContainer);
layout.Add("ID", mQueryContainer.Add(new DFTextBox(mDFInfo.Fields["ID"]), "ID"));
layout["ID"].NotAutoAddToContainer = true;
layout.Add("Date", new SimpleLabel("日期"), QueryCreator.DateRange(mDFInfo.Fields["Date"], mQueryContainer, "MinDate", "MaxDate"));
layout["Date"].NotAutoAddToContainer = true;
layout.Add("AccountingUnit_ID", new SimpleLabel("会计单位"),
QueryCreator.DFChoiceBoxEnableMultiSelection(mDFInfo.Fields["AccountingUnit_ID"], mQueryContainer, "AccountingUnit_ID", B3FrameworksConsts.DataSources.授权会计单位全部));
layout["AccountingUnit_ID"].NotAutoAddToContainer = true;
layout.Add("Department_ID", new SimpleLabel("部门"),
QueryCreator.DFChoiceBoxEnableMultiSelection(mDFInfo.Fields["Department_ID"], mQueryContainer, "Department_ID", B3FrameworksConsts.DataSources.部门全部));
layout["Department_ID"].NotAutoAddToContainer = true;
layout.Add("Employee_ID", new SimpleLabel("经办人"),
QueryCreator.DFChoiceBoxEnableMultiSelection(mDFInfo.Fields["Employee_ID"], mQueryContainer, "Employee_ID", B3FrameworksConsts.DataSources.员工全部));
layout["Employee_ID"].NotAutoAddToContainer = true;
layout.Add("Store_ID", new SimpleLabel("仓库"),
QueryCreator.DFChoiceBoxEnableMultiSelection(mDFInfo.Fields["Store_ID"], mQueryContainer, "Store_ID", B3FrameworksConsts.DataSources.可用仓库全部));
layout["Store_ID"].NotAutoAddToContainer = true;
layout.Add("Goods_ID", new SimpleLabel("存货"),
QueryCreator.DFChoiceBoxEnableMultiSelection(mDFInfo.Fields["ID"], mQueryContainer, "Goods_ID", B3UnitedInfosConsts.DataSources.存货));
layout["Goods_ID"].NotAutoAddToContainer = true;
var state = mQueryContainer.Add(B3ButcheryCustomInputCreator.一般单据状态(mDFInfo.Fields["BillState"], true, false, true, true), "BillState");
((ChoiceBox)state).Value = 单据状态.已审核.Value.ToString() + "|";
state.DisplayValue = "已审核;";
state.EnableInputArgument = true;
layout.Add("BillState", state);
layout["BillState"].NotAutoAddToContainer = true;
var config = new AutoLayoutConfig {
Cols = 2
};
config.Add("ID");
config.Add("AccountingUnit_ID");
config.Add("Date");
config.Add("Department_ID");
config.Add("Employee_ID");
config.Add("Store_ID");
config.Add("Goods_ID");
config.Add("BillState");
layout.Config = config;
vPanel.Add(layout.CreateLayout());
}
protected override void AddQueryControls(VLayoutPanel vPanel)
{
var customPanel = new LayoutManager("Main", _mainInfo, mQueryContainer);
customPanel.Add("ID", mQueryContainer.Add(new DFTextBox(_mainInfo.Fields["ID"]), "ID"));
customPanel["ID"].NotAutoAddToContainer = true;
customPanel.Add("PlanNumber_ID", new SimpleLabel("计划号"), QueryCreator.DFChoiceBoxEnableMultiSelection(_detailInfo.Fields["PlanNumber_ID"], mQueryContainer, "PlanNumber_ID", B3ButcheryDataSource.计划号));
customPanel["PlanNumber_ID"].NotAutoAddToContainer = true;
customPanel.Add("AccountingUnit_ID", QueryCreator.DFChoiceBoxEnableMultiSelection(_mainInfo.Fields["AccountingUnit_ID"], mQueryContainer, "AccountingUnit_ID", B3FrameworksConsts.DataSources.授权会计单位全部));
customPanel["AccountingUnit_ID"].NotAutoAddToContainer = true;
customPanel.Add("Department_ID", QueryCreator.DFChoiceBoxEnableMultiSelection(_mainInfo.Fields["Department_ID"], mQueryContainer, "Department_ID", B3FrameworksConsts.DataSources.授权部门全部));
customPanel["Department_ID"].NotAutoAddToContainer = true;
customPanel.Add("Store_ID", new SimpleLabel("仓库"), QueryCreator.DFChoiceBoxEnableMultiSelection(_mainInfo.Fields["Store_ID"], mQueryContainer, "Store_ID", B3ButcheryDataSource.速冻库));
customPanel["Store_ID"].NotAutoAddToContainer = true;
customPanel.Add("BillState", mQueryContainer.Add(QueryCreator.一般单据状态可多选(_mainInfo.Fields["BillState"]), "BillState"));
customPanel["BillState"].NotAutoAddToContainer = true;
customPanel.Add("Goods_ID", new SimpleLabel("存货"), QueryCreator.DFChoiceBoxEnableMultiSelection(_detailInfo.Fields["Goods_ID"], mQueryContainer, "Goods_ID", B3UnitedInfosConsts.DataSources.存货));
customPanel["Goods_ID"].NotAutoAddToContainer = true;
customPanel.CreateDefaultConfig(2).Expand = false;
vPanel.Add(customPanel.CreateLayout());
}
protected virtual void AddQueryControl(AutoLayoutConfig config, LayoutManager layoutManager)
{
layoutManager.Add("GoodsProperty_ID",
QueryCreator.DFChoiceBoxEnableMultiSelection(mDFInfo.Fields["GoodsProperty_ID"], mQueryContainer,
"GoodsProperty_ID",
B3UnitedInfosConsts.DataSources.存货属性全部));
layoutManager["GoodsProperty_ID"].NotAutoAddToContainer = true;
layoutManager.Add("GoodsPropertyCatalog_ID", new SimpleLabel("属性分类"),
QueryCreator.DFChoiceBoxEnableMultiSelection(mDFInfo.Fields["GoodsProperty_ID"], mQueryContainer,
"GoodsPropertyCatalog_ID",
B3UnitedInfosConsts.DataSources.存货属性分类));
layoutManager["GoodsPropertyCatalog_ID"].NotAutoAddToContainer = true;
config.Add("Name");
config.Add("Code");
config.Add("GoodsProperty_ID");
config.Add("GoodsPropertyCatalog_ID");
}
private void AddQueryControl(VLayoutPanel vPanel)
{
var manager = new LayoutManager("", mDFInfo, mQueryContainer);
manager.Add("ID", new SimpleLabel("存货属性分类"), QueryCreator.DFChoiceBox(mDFInfo.Fields["ID"], B3UnitedInfos.B3UnitedInfosConsts.DataSources.存货属性分类));
manager.Add("GoodsProperty_ID", QueryCreator.DFChoiceBox(mDFInfo.Fields["GoodsProperty_ID"], B3UnitedInfos.B3UnitedInfosConsts.DataSources.存货属性全部));
var config = new AutoLayoutConfig
{
Cols = 8,
DefaultLabelWidth = 4
};
config.Add("ID");
config.Add("GoodsProperty_ID");
config.Add("Name");
config.Add("Code");
manager.Config = config;
vPanel.Add(manager.CreateLayout());
var hParnel = vPanel.Add(new HLayoutPanel());
hParnel.Add(new TSButton("开始查询", delegate { grid.Query = GetQueryDom(); grid.DataBind(); }));
hParnel.Add(new RedirectTSButton("清空条件"));
}
protected override void CreateQuery(VLayoutPanel vPanel)
{
var layoutManager = new LayoutManager("", mDFInfo, mQueryContainer);
layoutManager.Add("BrandItem_ID", new SimpleLabel("品牌"), QueryCreator.DFChoiceBox(mDFInfo.Fields["ID"], B3UnitedInfosConsts.DataSources.品牌项));
layoutManager.Add("ProduceRequest", new SimpleLabel("工艺描述"), QueryCreator.DFTextBox(mDFInfo.Fields["Remark"]));
layoutManager.Add("ProduceDate", new SimpleLabel("生产日期"), QueryCreator.TimeRange(mDFInfo.Fields["Date"], mQueryContainer, "MinProduceDate", "MaxProduceDate"));
layoutManager.Add("DeliveryDate", new SimpleLabel("交付日期"), QueryCreator.TimeRange(mDFInfo.Fields["Date"], mQueryContainer, "MinDeliveryDate", "MaxDeliveryDate"));
var config = new AutoLayoutConfig {
Cols = 8, DefaultLabelWidth = 4
};
config.Add("ID");
config.Add("CreateUser_Name");
config.Add("CheckUser_Name");
config.Add("AccountingUnit_ID");
config.Add("Employee_ID");
config.Add("Customer_ID");
config.Add("Date");
config.Add("ProductionUnit_ID");
config.Add("BrandItem_ID");
config.Add("ProduceRequest");
config.Add("ProduceDate");
config.Add("DeliveryDate");
layoutManager.Config = config;
var section = mPageLayoutManager.AddSection(B3FrameworksConsts.PageLayouts.QueryConditions, B3FrameworksConsts.PageLayouts.QueryConditions_DisplayName);
section.ApplyLayout(layoutManager, config, mPageLayoutManager, mDFInfo as DFInfo);
vPanel.Add(layoutManager.CreateLayout());
_hideFinishedBill = new DFCheckBox();
_hideFinishedBill.Text = "隐藏已转完工存货";
_hideFinishedBill.Checked = true;
vPanel.Add(_hideFinishedBill);
base.CreateQuery(vPanel);
}
protected override void BuildBody(Control container)
{
var layoutManager = new LayoutManager("main", mDFInfo, mDFContainer);
layoutManager.Add("ChargePerson_ID", InputCreator.DFChoiceBox("授权员工", "ChargePerson_Name", true));
var config = new AutoLayoutConfig();
config.Add("Name");
config.Add("ProductLine_ID");
config.Add("ChargePerson_ID");
layoutManager.Config = config;
container.Controls.Add(layoutManager.CreateLayout());
var vPanel = container.EAdd(new VLayoutPanel());
CreateInputDetailPanel(vPanel);
CreateOutputDetailPanel(vPanel);
}
protected override void BuildBasePropertiesEditor(TitlePanel titlePanel, PageLayoutSection pageLayoutSection)
{
var layoutManager = new LayoutManager("", mDFInfo, mDFContainer);
layoutManager.Add("WorkBill_ID", new B3ButcheryDFIDLink("B3Butchery/Bills/WorkShopPackBill_/WorkShopPackBillEdit.aspx?ID=", mDFInfo.Fields["WorkBill_ID"], mDFInfo.Fields["WorkBill_ID"]));
var config = new AutoLayoutConfig();
layoutManager.Config = config;
config.Add("AccountingUnit_ID");
config.Add("Department_ID");
config.Add("Employee_ID");
config.Add("Date");
config.Add("WorkBill_ID");
config.Add("Remark");
pageLayoutSection.SetRequired("AccountingUnit_ID");
pageLayoutSection.ApplyLayout(layoutManager, config, mPageLayoutManager, mDFInfo);
titlePanel.Controls.Add(layoutManager.CreateLayout());
}
protected override void AddQueryControls(VLayoutPanel vPanel)
{
var customPanel = new LayoutManager("Main", _mainInfo, mQueryContainer);
customPanel.Add("ProductionPlan_ID", new SimpleLabel("计划号"), QueryCreator.DFChoiceBoxEnableMultiSelection(_mainInfo.Fields["ProductionPlan_ID"], mQueryContainer, "ProductionPlan_ID", B3ButcheryDataSource.计划号));
customPanel["ProductionPlan_ID"].NotAutoAddToContainer = true;
customPanel.Add("AccountingUnit_ID", QueryCreator.DFChoiceBoxEnableMultiSelection(_mainInfo.Fields["AccountingUnit_ID"], mQueryContainer, "AccountingUnit_ID", B3FrameworksConsts.DataSources.授权会计单位全部));
customPanel["AccountingUnit_ID"].NotAutoAddToContainer = true;
customPanel.Add("Department_ID", QueryCreator.DFChoiceBoxEnableMultiSelection(_mainInfo.Fields["Department_ID"], mQueryContainer, "Department_ID", B3FrameworksConsts.DataSources.授权部门全部));
customPanel["Department_ID"].NotAutoAddToContainer = true;
customPanel.Add("Employee_ID", QueryCreator.DFChoiceBoxEnableMultiSelection(_mainInfo.Fields["Employee_ID"], mQueryContainer, "Employee_ID", B3FrameworksConsts.DataSources.授权员工全部));
customPanel["Employee_ID"].NotAutoAddToContainer = true;
customPanel.Add("Store_ID", new SimpleLabel("速冻库"), QueryCreator.DFChoiceBoxEnableMultiSelection(_mainInfo.Fields["Store_ID"], mQueryContainer, "Store_ID", B3ButcheryDataSource.速冻库));
customPanel["Store_ID"].NotAutoAddToContainer = true;
customPanel.Add("OtherInStoreType_ID", QueryCreator.DFChoiceBoxEnableMultiSelection(_mainInfo.Fields["OtherInStoreType_ID"], mQueryContainer, "OtherInStoreType_ID", B3ButcheryDataSource.屠宰分割入库类型));
customPanel["OtherInStoreType_ID"].NotAutoAddToContainer = true;
customPanel.Add("Remark", QueryCreator.DFTextBox(_mainInfo.Fields["Remark"]));
customPanel.Add("Goods_ID", new SimpleLabel("存货"), QueryCreator.DFChoiceBoxEnableMultiSelection(_detailInfo.Fields["Goods_ID"], mQueryContainer, "Goods_ID", B3UnitedInfosConsts.DataSources.存货));
customPanel["Goods_ID"].NotAutoAddToContainer = true;
customPanel.CreateDefaultConfig(2).Expand = false;
vPanel.Add(customPanel.CreateLayout());
}
protected override void BuildBasePropertiesEditor(TitlePanel titlePanel, PageLayoutSection pageLayoutSection)
{
var layoutManager = new LayoutManager("", mDFInfo, mDFContainer);
layoutManager.Add("CustomerAddress", new DFTextBox(mDFInfo.Fields["CustomerAddress"]));
var config = new AutoLayoutConfig();
layoutManager.Config = config;
config.Add("AccountingUnit_ID");
config.Add("Date");
config.Add("Department_ID");
config.Add("Customer_ID");
config.Add("Employee_ID");
config.Add("ProductionUnit_ID");
config.Add("CustomerAddress");
config.Add("Remark");
pageLayoutSection.SetRequired("AccountingUnit_ID");
pageLayoutSection.ApplyLayout(layoutManager, config, mPageLayoutManager, mDFInfo);
titlePanel.Controls.Add(layoutManager.CreateLayout());
}
private void AddQueryControl(VLayoutPanel vPanel)
{
var mDFInfo = DFInfo.Get(typeof(Goods));
var manager = new LayoutManager("", mDFInfo, _mQueryContainer);
manager.Add("ID", new SimpleLabel("存货ID"), QueryCreator.DFTextBox(mDFInfo.Fields["ID"]));
manager.Add("Name", QueryCreator.DFTextBox(mDFInfo.Fields["Name"]));
manager.Add("Code", QueryCreator.DFTextBox(mDFInfo.Fields["Code"]));
manager.Add("GoodsPropertyCatalog_ID", new SimpleLabel("存货属性分类"), _goodsPropertyCatalogBox = QueryCreator.DFChoiceBox(mDFInfo.Fields["ID"], B3UnitedInfosConsts.DataSources.存货属性分类));
manager.Add("GoodsProperty_ID", new SimpleLabel("存货属性"), QueryCreator.DFChoiceBox(mDFInfo.Fields["ID"], B3UnitedInfosConsts.DataSources.存货属性全部));
_checkBox = new DFCheckBox {
Text = "隐藏已设置的存货", Checked = true
};
manager.Add("Stopped", _checkBox, false, true);
var config = new AutoLayoutConfig
{
Cols = 8,
DefaultLabelWidth = 4,
};
config.Add("ID");
config.Add("Name");
config.Add("Code");
config.Add("GoodsPropertyCatalog_ID");
config.Add("GoodsProperty_ID");
config.Add("Stopped");
manager.Config = config;
vPanel.Add(manager.CreateLayout());
var hPanel = vPanel.Add(new HLayoutPanel());
hPanel.Add(new TSButton("开始查询", delegate { StartQuery(); }));
hPanel.Add(new RedirectTSButton("清除条件"));
}
public void Spooky()
{
Random random = new Random();
using (Source source = new Source())
using (Sink sink = new Sink("Game", Height, Width))
{
////CharInfo[,] info = new CharInfo[Height, Width];
////for (int x = 0; x < Width; x++)
////{
//// for (int y = 0; y < Height; y++)
//// {
//// info[y, x] = new CharInfo(new CharUnion(), CharColors.GetRandom(random));
//// }
////}
////sink.WriteRegion(
//// info,
//// 0,
//// 0);
sink.Write("aaa");
sink.Write(default(CharInfo), Coord.Zero);
sink.WriteRegion(
new CharInfo[3, 3],
new Coord(0, 0));
CharColors borderColors = new CharColors(ConsoleColor.Blue, ConsoleColor.Black);
BorderBuilder builder = BorderBuilder.CreateExtraThickWindowStyle(borderColors);
Region region = new Region(new Coord(0, 0), new Coord(50, 15));
Border border = builder.Build(
region,
new FormattedString(
"═══════════\r\n<span fg=Red bg=Green dtime=100>Hello World</span>",
borderColors));
border.Draw(sink);
Text foo = new Text(
new FormattedString(
"Foo bar baz bazinga bazongo bingo bango bongo I don't want to leave the Congo oh no no no no no",
new CharColors(ConsoleColor.Green, ConsoleColor.Black)),
border.InnerRegion);
foo.Draw(sink);
Region otherRegion = new Region(new Coord(25, 5), new Coord(115, 28));
Border otherBorder = builder.Build(otherRegion);
otherBorder.Draw(sink);
Text bar = new Text(
new FormattedString(
LoremIpsum,
new CharColors(ConsoleColor.Magenta, ConsoleColor.Black)),
otherBorder.InnerRegion);
bar.Draw(sink);
////sink.Write(
//// "Hello, this is a test of a very long string which is being written with a delay inserted between printing of each character. I want to see if it will properly scroll, or if I'm going to need to do spooky math myself to make it work.",
//// new CharColors(ConsoleColor.Green, ConsoleColor.Black),
//// new Coord(30, 10),
//// 35,
//// DelayMode.PerWord);
LayoutManager layout = new LayoutManager(
sink,
() => source.LeftMouseDown,
() => source.RightMouseDown,
false);
Solid background = new Solid(
layout,
new Region(new Coord(2, 0), new Coord(Width, Height)),
BorderBuilder.CreateThinStyle(borderColors),
"background",
CharColors.Standard);
Button button = new Button(
layout,
new Region(new Coord(12, 12), new Coord(30, 20)),
BorderBuilder.CreateThinWindowStyle(borderColors),
"button",
"Hello",
Alignments.Default,
CharColors.Standard);
button.OnClicked +=
(obj, e) =>
{
button.Text = new string(Enumerable
.Range(0, random.Next(3, 9))
.Select(x => (char)random.Next(65, 91))
.ToArray());
};
layout.Add(background);
layout.Add(button);
Region constrainRegion = new Region(background.InnerRegion);
constrainRegion.TopLeft += new Coord(1, 0);
constrainRegion.BottomRight -= new Coord(1, 0);
layout.SetConstraint(button, constrainRegion);
source.OnKeyPressed +=
(obj, e) =>
{
layout.KeyPressed(e);
switch (e.Key)
{
case ConsoleKey.UpArrow:
bar.AdjustLinesSkipped(-1);
bar.Draw(sink);
break;
case ConsoleKey.DownArrow:
bar.AdjustLinesSkipped(1);
bar.Draw(sink);
break;
case ConsoleKey.PageDown:
bar.AdjustLinesSkipped(bar.MaximumVisibleLines);
bar.Draw(sink);
break;
case ConsoleKey.PageUp:
bar.AdjustLinesSkipped(-bar.MaximumVisibleLines);
bar.Draw(sink);
break;
case ConsoleKey.Spacebar:
layout.Draw();
break;
default:
break;
}
};
source.OnLeftMouse +=
(obj, e) =>
{
layout.LeftMouseEvent(e.Position, e.ButtonDown);
};
source.OnRightMouse +=
(obj, e) =>
{
layout.RightMouseEvent(e.Position, e.ButtonDown);
};
source.OnMouseMove +=
(obj, e) =>
{
layout.MouseMoveEvent(e.PreviousPosition, e.CurrentPosition);
};
source.OnVerticalMouseWheel +=
(obj, e) =>
{
layout.ScrollEvent(e.Position, e.Down);
if (e.Down)
{
bar.AdjustLinesSkipped(3);
}
else
{
bar.AdjustLinesSkipped(-3);
}
bar.Draw(sink);
};
layout.Active = true;
source.DelayUntilExitAccepted(default).Wait();
protected override void AddQueryControls(VLayoutPanel vPanel)
{
var customPanel = new LayoutManager("Main", mainInfo, mQueryContainer);
customPanel.Add("ID", QueryCreator.DFTextBox(mainInfo.Fields["ID"]));
customPanel.Add("AccountingUnit_ID", QueryCreator.DFChoiceBoxEnableMultiSelection(mainInfo.Fields["AccountingUnit_ID"], mQueryContainer, "AccountingUnit_ID", DataKind.授权会计单位全部));
customPanel["AccountingUnit_ID"].NotAutoAddToContainer = true;
customPanel.Add("Department_ID", QueryCreator.DFChoiceBoxEnableMultiSelection(mainInfo.Fields["Department_ID"], mQueryContainer, "Department_ID", DataKind.授权部门全部));
customPanel["Department_ID"].NotAutoAddToContainer = true;
customPanel.Add("Store_ID", _storeInput = QueryCreator.DFChoiceBoxEnableMultiSelection(mainInfo.Fields["Store_ID"], mQueryContainer, "Store_ID", DataKind.授权仓库全部), false);
customPanel["Store_ID"].NotAutoAddToContainer = true;
customPanel.Add("InStoreType_ID", QueryCreator.DFChoiceBoxEnableMultiSelection(mainInfo.Fields["InStoreType_ID"], mQueryContainer, "InStoreType_ID", B3ButcheryDataSource.屠宰分割入库类型全部));
customPanel["InStoreType_ID"].NotAutoAddToContainer = true;
customPanel.Add("CheckDate", QueryCreator.DateRange(mainInfo.Fields["CheckDate"], mQueryContainer, "MinCheckDate", "MaxCheckDate"));
customPanel.Add("InStoreDate", new SimpleLabel("生产日期"), QueryCreator.DateRange(detailInfo.Fields["ProductionDate"], mQueryContainer, "MinProductionDate", "MaxProductionDate"));
customPanel.Add("ProductPlan_ID", new SimpleLabel("生产计划号"), QueryCreator.DFChoiceBoxEnableMultiSelection(detailInfo.Fields["ProductPlan_ID"], mQueryContainer, "ProductPlan_ID", B3ButcheryDataSource.计划号));
customPanel["ProductPlan_ID"].NotAutoAddToContainer = true;
customPanel.Add("Remark", QueryCreator.DFTextBox(mainInfo.Fields["Remark"]));
DFChoiceBox goodsInput;
customPanel.Add("Goods_ID", new SimpleLabel("存货名称"), goodsInput = QueryCreator.DFChoiceBoxEnableMultiSelection(detailInfo.Fields["Goods_ID"], mQueryContainer, "Goods_ID", B3ButcheryDataSource.存货带编号全部));
goodsInput.PlaceHolder = "名称 编号 简拼";
customPanel["Goods_ID"].NotAutoAddToContainer = true;
customPanel.Add("Origin", new SimpleLabel("存货产地"), goodsOrigin = QueryCreator.DFTextBox(detailInfo.Fields["Goods_Code"]));
customPanel.Add("Goods_Name", new SimpleLabel("存货名称"), goodsName = QueryCreator.DFTextBox(detailInfo.Fields["Goods_Name"]));
customPanel.Add("Goods_Code", new SimpleLabel("存货编号"), QueryCreator.DFTextBox(detailInfo.Fields["Goods_Code"]));
customPanel.Add("Goods_Brand", new SimpleLabel("存货品牌"), QueryCreator.DFChoiceBox(detailInfo.Fields["Goods_Name"], B3ButcheryDataSource.存货品牌));
customPanel.Add("GoodsProperty_ID", new SimpleLabel("存货属性"), QueryCreator.DFChoiceBox(detailInfo.Fields["ID"], B3UnitedInfos.B3UnitedInfosConsts.DataSources.存货属性全部));
customPanel.Add("PropertyCatalog_ID", new SimpleLabel("属性分类"), QueryCreator.DFChoiceBox(detailInfo.Fields["ID"], B3UnitedInfos.B3UnitedInfosConsts.DataSources.存货属性分类全部));
customPanel.Add("DRemark", new SimpleLabel("备注"), QueryCreator.DFTextBox(detailInfo.Fields["Remark"]));
customPanel.Add("CargoSpace_ID", new SimpleLabel("货位"), cargoSpaceName = QueryCreator.DFChoiceBoxEnableMultiSelection(detailInfo.Fields["CargoSpace_ID"], mQueryContainer, "CargoSpace_ID", B3ButcheryDataSource.货位), false);
customPanel["CargoSpace_ID"].NotAutoAddToContainer = true;
customPanel.Add("ProductLine_ID", new SimpleLabel("产品线"), _productLine = QueryCreator.DFChoiceBoxEnableMultiSelection(detailInfo.Fields["ID"], mQueryContainer, "ProductLine_ID", B3UnitedInfosConsts.DataSources.产品线全部));
customPanel["ProductLine_ID"].NotAutoAddToContainer = true;
customPanel.Add("ProductLineCategory_ID", new SimpleLabel("产品线分类"), _producttypeLine = QueryCreator.DFChoiceBoxEnableMultiSelection(detailInfo.Fields["ID"], mQueryContainer, "ProductLineCategory_ID", B3UnitedInfosConsts.DataSources.产品线分类));
customPanel["ProductLineCategory_ID"].NotAutoAddToContainer = true;
AddOtherQuery(customPanel, mainInfo);
customPanel.Add("BillState", QueryCreator.一般单据状态(mainInfo.Fields["BillState"]));
if (_useBrand)
{
customPanel.Add("BrandItem_ID", new SimpleLabel("品牌项"), QueryCreator.DFChoiceBoxEnableMultiSelection(detailInfo.Fields["ID"], B3UnitedInfosConsts.DataSources.品牌项));
}
var config = customPanel.CreateDefaultConfig(4);
config.Expand = false;
TagWebUtil.AddTagQueryInput(mDmoTypeID, customPanel, config, mQueryContainer);
vPanel.Add(customPanel.CreateLayout());
}
/// <summary>
/// This method Display Notes
/// </summary>
public void DisplayNotes()
{
// Suspend updates
this.SuspendLayout();
// RemoveNoteControls
RemoveNoteControls();
// Create a new instance of a 'LayoutManager' object.
this.LayoutManager = new LayoutManager();
// Create a new instance of a 'Point' object.
Point point = new Point();
// Create a new instance of a 'NoteControl' object.
NoteControl noteControl = null;
// if the value for HasNotes is true
if (HasNotes)
{
// order by priority in descending order
List <Note> notes = Notes.OrderBy(x => x.Priority).OrderBy(x => x.Id).ToList();
// Iterate the collection of Note objects
foreach (Note note in Notes)
{
// Create a new instance of a 'NoteControl' object.
noteControl = new NoteControl();
// set the note
noteControl.Note = note;
noteControl.Dock = DockStyle.None;
// Add this control
this.Controls.Add(noteControl);
// determine which panel to add this to
switch (note.Priority)
{
case PriorityEnum.Low:
// get the point
point = layoutManager.Add(noteControl, PriorityEnum.Low);
// required
break;
case PriorityEnum.Normal:
// get the point
point = layoutManager.Add(noteControl, PriorityEnum.Normal);
// required
break;
case PriorityEnum.High:
// get the point
point = layoutManager.Add(noteControl, PriorityEnum.High);
// required
break;
}
// set the location
noteControl.Location = point;
}
// resume updates
this.ResumeLayout();
// refresh everything
this.Refresh();
}
}