/// <summary>
/// 任务流
/// </summary>
/// <returns></returns>
private int TestTaskFlow()
{
int ret = -1;
string pattern = null;
eidRead = "NULL";
if (readWriteIdHandle.IsTimeOut)
{
frmMain.DisplayLog("测试超时\r\n");
return(ret);
}
ProductionInfo.SystemType systemType = ProductionInfo.Type;
//使用do..while(false)的原因，是为了当测试流程为fail时，使用break跳出该结构，仍然执行结果上报
do
{
//从芯片获取eid
//eidRead = "081603FFFFF35293" + eidlast.ToString("X").PadLeft(4,'0');
//int readRet = 1;
eidRead = readWriteIdHandle.ReadId(ATReadCmd.ReadIdType.EidRead);
pattern = @"[0-9A-Z]{20}";
if (string.IsNullOrEmpty(eidRead) || !Regex.IsMatch(eidRead, pattern))
{
frmMain.DisplayLog("EID读取失败\r\n");
break;
}
frmMain.DisplayLog(string.Format("已获取模块EID：{0}\r\n", eidRead));
frmMain.SetText(AllForms.EnumControlWidget.txtEid.ToString(), eidRead, false);
//从芯片读出SN
snRead = readWriteIdHandle.ReadId(ATReadCmd.ReadIdType.SnRead);
pattern = @"^[0-9A-Z]{16}$";
if (string.IsNullOrEmpty(snRead))
{
frmMain.DisplayLog("SN为空读取失败\r\n");
break;
}
if (!Regex.IsMatch(snRead, pattern))
{
frmMain.DisplayLog("SN合法性检查:SN不合法败\r\n");
break;
}
frmMain.DisplayLog(string.Format("已获取模块合法SN：{0}\r\n", snRead));
frmMain.SetText(AllForms.EnumControlWidget.txtSn.ToString(), snRead, false);
//从芯片读出IMEI
imeiRead = readWriteIdHandle.ReadId(ATReadCmd.ReadIdType.ImeiRead);
pattern = @"\d{15}";
if (string.IsNullOrEmpty(imeiRead) || !Regex.IsMatch(imeiRead, pattern))
{
frmMain.DisplayLog("IMEI读取失败\r\n");
break;
}
frmMain.DisplayLog(string.Format("已获取模块IMEI：{0}\r\n", imeiRead));
frmMain.SetText(AllForms.EnumControlWidget.txtImei.ToString(), imeiRead, false);
//从芯片获取iccid
iccidRead = readWriteIdHandle.ReadId(ATReadCmd.ReadIdType.IccidRead);
pattern = @"[0-9A-Z]{20}";
if (string.IsNullOrEmpty(iccidRead) || !Regex.IsMatch(iccidRead, pattern))
{
frmMain.DisplayLog("ICCID读取失败\r\n");
break;
}
frmMain.DisplayLog(string.Format("已获取模块ICCID：{0}\r\n", iccidRead));
frmMain.SetText(AllForms.EnumControlWidget.txtIccid.ToString(), iccidRead, false);
//从芯片获取Verson
versonRead = readWriteIdHandle.ReadId(ATReadCmd.ReadIdType.VersonRead);
if (string.IsNullOrEmpty(iccidRead))
{
frmMain.DisplayLog("版本号读取失败 FAIL\r\n");
break;
}
frmMain.DisplayLog(string.Format("已获取版本号：{0}\r\n", versonRead));
if (versonRead != VersonIni.ToUpper())
{
frmMain.DisplayLog(string.Format("读出的版本号:{0} 与 配置的版本号:{1} 不一致 FAIL\r\n", versonRead, VersonIni));
break;
//ret = -1;
//return ret;
}
else
{
frmMain.DisplayLog(string.Format("读出的版本号:{0} 与 配置的版本号:{1} 一致 PASS\r\n", versonRead, VersonIni));
}
//判断IMEI与标签IMEI是否一致
if (labelImei == imeiRead)
{
frmMain.DisplayLog(string.Format("标签IMEI：{0}与模块IMEI：{1}对比一致 PASS\r\n", labelImei, imeiRead));
}
else
{
frmMain.DisplayLog(string.Format("标签IMEI：{0}与模块IMEI：{1}对比不一致 FAIL\r\n", labelImei, imeiRead));
break;
}
//eid与iccid的后6位对比
if (CompareEidIccid == 1)//要对比
{
string lastSixIccid = iccidRead.Substring(iccidRead.Length - 6);
string lastSixEid = eidRead.Substring(eidRead.Length - 6);
if (JudgeStandard == 0)
{
//一样 FAIL
if (lastSixIccid == lastSixEid)
{
frmMain.DisplayLog(string.Format("空中写号检查：未做。详细：后6位的eid:{0} 与 iccid:{1} 完全一致 FAIL\r\n", lastSixEid, lastSixIccid));
break;
//ret = -1;
//return ret;
}
else
{
frmMain.DisplayLog(string.Format("空中写号检查：通过。详细：后6位的eid:{0} 与 iccid:{1}不一致 PASS\r\n", lastSixEid, lastSixIccid));
}
}
else if (JudgeStandard == 1)
{
//一样 PASS
if (lastSixIccid != lastSixEid)
{
frmMain.DisplayLog(string.Format("空中写号检查：未做。详细：后6位的eid:{0} 与 iccid:{1} 不一致 FAIL\r\n", lastSixEid, lastSixIccid));
break;
//ret = -1;
//return ret;
}
else
{
frmMain.DisplayLog(string.Format("空中写号检查：通过。详细：后6位的eid:{0} 与 iccid:{1}完全一致 PASS\r\n", lastSixEid, lastSixIccid));
}
}
}
//离线查重IMEI
if (ProductionInfo.Type == ProductionInfo.SystemType.Offline)
{
JiaHao.ExcelHelp.ExcelHelper excel = JiaHao.ExcelHelp.ExcelHelper.GetExcelHelperInstance();
ret = excel.SearchImei(imeiRead);
if (ret != 0)
{
frmMain.DisplayLog(string.Format("IMEI查重: {0} 重复 FAIL\r\n", imeiRead));
return(ret);
}
else
{
frmMain.DisplayLog(string.Format("IMEI查重: {0} 本机查重 PASS\r\n", imeiRead));
}
}
#region
if (systemType == ProductionInfo.SystemType.iMES)
{
//调用打印接口下拉eid相关信息rep，为了生成Log作准备
Production.Server.NewHttpImeiPrint.ResponseInfo rep;
string errorInfo;
ret = ToImesInterface.ImeiPrint(out rep, imeiRead, out errorInfo);
//ImeiPrint(out rep);
if (ret != 0)
{
//显示结果：下拉失败,并改变颜色
frmMain.DisplayLog("从IMES下拉信息失败" + errorInfo + "\r\n");
break;
}
frmMain.DisplayLog("从IMES下拉信息成功\r\n");
//模组读出的和IMES下拉的是否相同
//IMEI,PUBLICSN,ICCID,IMSI,EID,IMEIBINDINGSN,DATE
//"sn":123456789012345,AI18082202000001,,,,,8822
string[] idNumber = rep.sn.ToUpper().Split(',');
#region 比对
#region IMEI
if (idNumber[0] == "")
{
frmMain.DisplayLog(string.Format("服务器IMEI获取为空 FAIL\r\n"));
ret = -1;
break;
}
if (idNumber[0] != imeiRead.ToUpper())
{
frmMain.DisplayLog(string.Format("服务器IMEI:{0} 与 模块IMEI:{1} 不一致 FAIL\r\n", idNumber[0], imeiRead));
ret = -1;
break;
}
else
{
frmMain.DisplayLog(string.Format("服务器IMEI:{0} 与 模块IMEI:{1} 一致 PASS\r\n", idNumber[0], imeiRead));
}
#endregion
#region SN
if (idNumber[1] != snRead.ToUpper())
{
frmMain.DisplayLog(string.Format("服务器SN:{0} 与 模块SN:{1} 不一致 FAIL\r\n", idNumber[1], snRead));
ret = -1;
break;
}
else
{
frmMain.DisplayLog(string.Format("服务器SN:{0} 与 模块SN:{1} 一致 PASS\r\n", idNumber[1], snRead));
}
#endregion
#region ICCID
if (idNumber[2] != iccidRead.ToUpper())
{
frmMain.DisplayLog(string.Format("服务器ICCID:{0} 与 模块ICCID:{1} 不一致 FAIL\r\n", idNumber[2], iccidRead));
ret = -1;
break;
}
else
{
frmMain.DisplayLog(string.Format("服务器ICCID:{0} 与 模块ICCID:{1} 一致 PASS\r\n", idNumber[2], iccidRead));
}
#endregion
#region EID
if (idNumber[4] != eidRead.ToUpper())
{
frmMain.DisplayLog(string.Format("服务器EID:{0} 与 模块EID:{1} 不一致 FAIL\r\n", idNumber[4], eidRead));
ret = -1;
break;
}
else
{
frmMain.DisplayLog(string.Format("服务器EID:{0} 与 模块EID:{1} 一致 PASS\r\n", idNumber[4], eidRead));
}
#endregion
#endregion
}
if (systemType == ProductionInfo.SystemType.GSMMES)
{
//EID合法性检查
ret = EidVerify();
if (ret != 0)
{
break;
}
}
#endregion
if (systemType == ProductionInfo.SystemType.GSMMES)
{
//EID合法性检查
ret = CheckAllNumber();
if (ret != 0)//失败就直接上报测试结果
{
break;
}
}
} while (false);
if (systemType == ProductionInfo.SystemType.GSMMES)
{
frmMain.DisplayLog("测试数据上报服务器\r\n");
//EID/IMEI/SN上报服务器
int resultUpload = ret == 0 ? 1 : 2;
string testDada = string.Empty;
string log = frmMain.ReadLog();
ret = EidUpload(resultUpload, log);
if (ret != 0)
{
frmMain.DisplayLog("过站失败\r\n");
return(ret);
}
}
#region 离线 记录到Excel
if (ProductionInfo.Type == ProductionInfo.SystemType.Offline)
{
if (ret == 0)
{
JiaHao.ExcelHelp.ExcelHelper excel = JiaHao.ExcelHelp.ExcelHelper.GetExcelHelperInstance();
excel.ExportExcelOneByOne(new JiaHao.ExcelHelp.ExcelHelper.TrayInfoInExcel()
{
num = 1,
sn = snRead,
imei = imeiRead,
eid = eidRead,
iccid = iccidRead,
cuatomerName = "中移物联"
});
frmMain.DisplayLog("写入Excel成功\r\n");
}
}
#endregion
return(ret);
}
private int TestFlow()
{
int ret = -1;
string pattern = null;
try
{
#region
txtLog.Text = "Log:\r\n";
txtLog.BackColor = Color.White;
txtLog.Refresh();
//开启线程
Thread Procedure = new Thread(new ThreadStart(procedureThread));
Procedure.IsBackground = false;
Procedure.Start();
//合法性检测
pattern = @"[0-9A-Z]{12}";
if (string.IsNullOrEmpty(txtMac.Text) || !Regex.IsMatch(txtMac.Text, pattern))
{
DisplayLog(string.Format("MAC合法性检查: {0} 不合法 FAIL\r\n", txtMac.Text));
return(ret);
}
//离线查重MAC
if (ProductionInfo.Type == ProductionInfo.SystemType.Offline)
{
JiaHao.ExcelHelp.ExcelHelper excel = JiaHao.ExcelHelp.ExcelHelper.GetExcelHelperInstance();
int retCheck = excel.SearchImei(txtMac.Text);
if (retCheck != 0)
{
DisplayLog(string.Format("MAC查重: {0} 重复 FAIL\r\n", txtMac.Text));
//return ret;
//stopWatcher1.Stop();
return(retCheck);
}
else
{
DisplayLog(string.Format("MAC查重: {0} 本机查重 PASS\r\n", txtMac.Text));
}
}
//分配SN
JiaHao.ExcelHelp.ExcelHelper snExcel = JiaHao.ExcelHelp.ExcelHelper.GetExcelHelperInstance(true);
string sn = snExcel.GetSn();//读最后一行
if (string.IsNullOrEmpty(sn))
{
DisplayLog(string.Format("分配SN: MAC:{0}分配SN失败 FAIL\r\n", txtMac.Text));
ret = -1;
return(ret);
}
DisplayLog(string.Format("分配SN: {0}成功 PASS\r\n", sn));
txtSn.Text = sn;
txtSn.Refresh();
string strTimeNow = DateTime.Now.ToString("yyyyMMdd_HHmmss");
string strBinFilePath = strBinPath + txtSn.Text.ToUpper() + "_" + strTimeNow + ".bin";
FileStream fs = new FileStream(strBinFilePath, FileMode.Create);//@"C:\Users\ZJH\Desktop\test2.bin"
BinaryWriter bw = new BinaryWriter(fs);
//byte[] byteArray = StringToHex(textSN.Text);
//
byte[] byteArray = System.Text.Encoding.UTF8.GetBytes(txtSn.Text);
for (int i = 0; i < byteArray.Length; i++)
{
bw.Write((byte)byteArray[i]);
}
bw.Close();
fs.Close();
StringBuilder SN = new StringBuilder(256);
string path;
IntPtr ptrTestSoftFormMain = FindWindow(espApplicationPath);
IntPtr ptrChild1 = Win32API.FindWindowEx(ptrTestSoftFormMain, IntPtr.Zero, null, null);//
Win32API.SendMessage(ptrChild1, Win32API.WM_GETTEXT, 100, SN);
path = SN.ToString();
IntPtr ptrChild1_1 = Win32API.FindWindowEx(ptrChild1, IntPtr.Zero, null, null);//
Win32API.SendMessage(ptrChild1_1, Win32API.WM_GETTEXT, 100, SN);
path = SN.ToString();
IntPtr ptrChild1_2 = Win32API.FindWindowEx(ptrChild1, ptrChild1_1, null, null);//
Win32API.SendMessage(ptrChild1_2, Win32API.WM_GETTEXT, 100, SN);
path = SN.ToString();
IntPtr ptrChild1_3S = Win32API.FindWindowEx(ptrChild1, ptrChild1_2, null, null); //
IntPtr ptrChild1_3S_1 = Win32API.FindWindowEx(ptrChild1_3S, IntPtr.Zero, null, null); //
IntPtr ptrChild1_3S_1_1 = Win32API.FindWindowEx(ptrChild1_3S_1, IntPtr.Zero, null, null); //
IntPtr ptrChild1_3S_1_1_1 = Win32API.FindWindowEx(ptrChild1_3S_1_1, IntPtr.Zero, null, null); //
IntPtr ptrChild3S_1_1_1_1text = Win32API.FindWindowEx(ptrChild1_3S_1_1_1, IntPtr.Zero, null, null); //
if (ptrChild3S_1_1_1_1text.Equals(IntPtr.Zero))
{
DisplayLog("烧录软件检查: 无法抓取到烧录软件路径栏 Edit FAIL\r\n");
return(ret);
}
Win32API.SendMessage(ptrChild3S_1_1_1_1text, Win32API.WM_SETTEXT, 0, strBinFilePath);
//抓取Button
IntPtr ptrChild1_3S_3 = Win32API.FindWindowEx(ptrChild1_3S, IntPtr.Zero, null, "ESP FLASH DOWNLOAD TOOL V0.9.7");//
Win32API.SendMessage(ptrChild1_3S_3, Win32API.WM_GETTEXT, 100, SN);
path = SN.ToString();
IntPtr ptrChild1_3S_3_1 = Win32API.FindWindowEx(ptrChild1_3S_3, IntPtr.Zero, null, null);//
Win32API.SendMessage(ptrChild1_3S_3_1, Win32API.WM_GETTEXT, 100, SN);
path = SN.ToString();
IntPtr ptrChild1_3S_3_1_1 = Win32API.FindWindowEx(ptrChild1_3S_3_1, IntPtr.Zero, null, null);//
Win32API.SendMessage(ptrChild1_3S_3_1_1, Win32API.WM_GETTEXT, 100, SN);
path = SN.ToString();
IntPtr ptrChild1_3S_3_1_1_5start = Win32API.FindWindowEx(ptrChild1_3S_3_1_1, IntPtr.Zero, null, "START");//
Win32API.SendMessage(ptrChild1_3S_3_1_1_5start, Win32API.WM_GETTEXT, 100, SN);
path = SN.ToString();
if (ptrChild1_3S_3_1_1_5start.Equals(IntPtr.Zero))
{
//MessageBox.Show("未抓取到START按键");
DisplayLog("烧录软件检查: 无法抓取到START按键 FAIL\r\n");
return(ret);
}
if (CheckSn == 1)
{
DisplayLog(string.Format("等待{0}s ....,请上电进入下载模式 进行查询SN\r\n", WaitintTime / 1000));
//扫码等待5s后，查询SN
Thread.Sleep(WaitintTime);
#region 查询产品是否有SN
// 读取SN生产bin文件
string strCmdReturn1;
DisplayLog("开始读取芯片0xc1000地址...\r\n");
int retCmd1 = cmdProcess.ExeCommand(ReadToolFolderName, ReadToolAppName, ComPort, out strCmdReturn1);
//使用工具读取addr并生成bin成功
if (retCmd1 != 0)
{
Process[] processes = Process.GetProcesses(); //创建并实例化一个操作进程的类：Process
foreach (var item in processes)
{
if (item.ProcessName == "read_bin_addr")
{
item.Close();
//item.Kill();
break;
}
}
DisplayLog("SN查询:读取地址失败 FAIL，提示:超过等待时间，设备需3次进入下载模式\r\n");
return(retCmd1);
//goto END;//END 处理收尾:显示烧写结果,清空
}
DisplayLog("读取芯片0xc1000地址生成bin成功\r\n");
DisplayLog("开始读取bin中的SN...\r\n");
//获取bin文件路径
int po;
string idKeySubstr1 = "save data to : ";
if ((po = strCmdReturn1.IndexOf(idKeySubstr1)) >= 0)
{
string createdBinPath = strCmdReturn1.Substring(po + idKeySubstr1.Length);
//读取bin文件,前7个字节
createdBinPath = createdBinPath.Replace("./", "./" + ReadToolFolderName + "/");
byte[] readHex = ReadFile(createdBinPath);
//将读取与写入对比，一致则写入成功
string strRead = Encoding.UTF8.GetString(readHex);
//if (strRead != "")
//{
//}
DisplayLog("读取bin中的SN成功\r\n");
for (int i = 0; i < readHex.Length; i++)
{
if (readHex[i] != 0xFF)
{
hasSn = true;
}
}
if (hasSn)
{
hasSn = false;
DisplayLog("SN查询:" + string.Format("产品中已有SN:{0} FAIL\r\n", strRead));
return(ret);
}
DisplayLog("SN查询:" + "产品中未写过SN PASS\r\n");
}
#endregion
}
DisplayLog(string.Format("等待{0}s ....,请上电进入下载模式,进行下载\r\n", WaitintTime / 1000));
//扫码等待5s后点击Start按键
Thread.Sleep(WaitintTime);
//点击START按键
Win32API.SendMessage(ptrChild1_3S_3_1_1_5start, Win32API.BM_CLICK, 0, "0");
//需等烧录完成后，并按板子进入烧录模式，再启动读取软件，读取数据
DisplayLog(string.Format("等待{0}s ....,请在下载完成后再次上电进入下载模式，进行校验\r\n", WaitintTime / 1000));
Thread.Sleep(WaitintTime);
// 读取SN生产bin文件
#region
DisplayLog("开始读取芯片0xc1000地址...\r\n");
string strCmdReturn;
int retCmd = cmdProcess.ExeCommand(ReadToolFolderName, ReadToolAppName, ComPort, out strCmdReturn);
//使用工具读取addr并生成bin成功
if (retCmd != 0)
{
Process[] processes = Process.GetProcesses(); //创建并实例化一个操作进程的类：Process
foreach (var item in processes)
{
if (item.ProcessName == "read_bin_addr")
{
item.Close();
//item.Kill();
break;
}
}
DisplayLog("SN校验:校验失败，提示:超过等待时间，设备需2次进入下载模式\r\n");
return(retCmd);
//goto END;//END 处理收尾:显示烧写结果,清空
}
DisplayLog("读取芯片0xc1000地址生成bin成功\r\n");
DisplayLog("开始读取bin中的SN...\r\n");
#endregion
//获取bin文件路径
int positon;
string idKeySubstr = "save data to : ";
if ((positon = strCmdReturn.IndexOf(idKeySubstr)) >= 0)
{
string createdBinPath = strCmdReturn.Substring(positon + idKeySubstr.Length);
//读取bin文件,前7个字节
createdBinPath = createdBinPath.Replace("./", "./" + ReadToolFolderName + "/");
byte[] readHex = ReadFile(createdBinPath);
//将读取与写入对比，一致则写入成功
for (int i = 0; i < readHex.Length; i++)
{
if (readHex[i] != byteArray[i])
{
isDiff = true;
}
}
DisplayLog("读取bin中的SN成功\r\n");
if (isDiff)
{
isDiff = false;
DisplayLog("SN校验:" + txtSn.Text + " 写入错误,写入失败 FAIL\r\n");
return(ret);
}
DisplayLog("SN校验:" + txtSn.Text + " 写入正确 PASS\r\n");
#region 离线 记录到Excel
if (ProductionInfo.Type == ProductionInfo.SystemType.Offline)
{
JiaHao.ExcelHelp.ExcelHelper excel = JiaHao.ExcelHelp.ExcelHelper.GetExcelHelperInstance();
excel.ExportExcelOneByOne(new JiaHao.ExcelHelp.ExcelHelper.TrayInfoInExcel()
{
num = 1,
mac = txtMac.Text,
sn = txtSn.Text,
cuatomerName = "厦门阳光"
});
//Log添加 写入Excel成功
DisplayLog("写入过站记录表: MAC:" + txtMac.Text + " SN:" + txtSn.Text + " PASS\r\n");
//删除最后一行SN
ret = snExcel.DeleteLastRow();
if (ret != 0)
{
DisplayLog(string.Format("删除SN: MAC({0})删除最后一行SN失败 FAIL\r\n", txtMac.Text));
return(ret);
}
else
{
DisplayLog(string.Format("删除SN: MAC({0})删除最后一行SN成功 PASS\r\n", txtMac.Text));
}
}
#endregion
ret = 0;
}
#endregion
}
catch (Exception ex)
{
MessageBox.Show(txtSn.Text + ex.Message);
txtSn.Text = "";
return(ret);
}
return(ret);
}
