public WordResult IntToWord([FromBody] IntInput numberInput)
{
var wordResult = new WordResult();
if (string.IsNullOrWhiteSpace(numberInput.Number))
{
wordResult.Message = "Please provide a valid number that larger than 0.";
Response.StatusCode = 400;
return(wordResult);
}
try
{
wordResult.Result = NumberTextConverter.IntegerToWritten(numberInput.Number);
}
catch (NumberTextConverterException e)
{
wordResult.Message = e.Message;
Response.StatusCode = 400;
return(wordResult);
}
catch
{
wordResult.Message = "Internal Server Error";
Response.StatusCode = 500;
return(wordResult);
}
return(wordResult);
}
public static MethodResult Wait(object sender, IEventInput input)
{
IntInput IInput = (IntInput)input;
System.Threading.Thread.Sleep(IInput.Input);
return(MethodResult.Success);
}
public void SetInt(byte i_Key, int i_Value)
{
RemoveInt(i_Key);
IntInput intInput = new IntInput(i_Key, i_Value);
m_Ints.Add(intInput);
}
public override void Setup(IInputControl <int> controlToUse)
{
base.Setup(controlToUse);
IntInput controlAsIntInput = controlToUse as IntInput;
if (controlAsIntInput == null)
{
return;
}
controlAsIntInput.Setup(_minValue, _maxValue, _increment);
controlAsIntInput.Value = _defaultValue;
}
public int GetInt(byte i_Key)
{
int index = GetIntInputIndex(i_Key);
if (index >= 0)
{
IntInput intInput = m_Ints[index];
return(intInput.value);
}
return(0);
}
/// <summary>
/// Overrides <see cref="CADability.Actions.ConstructAction.OnSetAction ()"/>
/// </summary>
public override void OnSetAction()
{
base.TitleId = "CopyCircularObjects";
BoundingRect result = originals.GetExtent(Frame.ActiveView.ProjectedModel.Projection, true, false);
centerPoint = base.ActiveDrawingPlane.ToGlobal(result.GetCenter());
// rotationPoint = base.ActiveDrawingPlane.ToGlobal(result.GetLowerLeft());
rotationPoint = centerPoint;
distX = result.Width;
if (copCount == 0)
{
copCount = 4;
copAngle = Math.PI / 2.0;
}
GeoPointInput rotPoint = new GeoPointInput("CopyCircularObjects.RotationPoint");
rotPoint.SetGeoPointEvent += new CADability.Actions.ConstructAction.GeoPointInput.SetGeoPointDelegate(SetRotPoint);
rotPoint.GetGeoPointEvent += new CADability.Actions.ConstructAction.GeoPointInput.GetGeoPointDelegate(GetRotPoint);
rotPoint.Optional = true;
rotPoint.DefinesHotSpot = true;
rotPoint.HotSpotSource = "Hotspots.png:0";
IntInput copiesCount = new IntInput("CopyCircularObjects.CopiesCount", copCount);
copiesCount.SetMinMax(0, int.MaxValue, true);
copiesCount.SetIntEvent += new CADability.Actions.ConstructAction.IntInput.SetIntDelegate(SetCopiesCount);
// copiesCount.CalculateIntEvent +=new CADability.Actions.ConstructAction.IntInput.CalculateIntDelegate(CalcCopiesCount);
BooleanInput fullCircle = new BooleanInput("CopyCircularObjects.FullCircle", "CopyCircularObjects.FullCircle.Values");
fullCircle.SetBooleanEvent += new CADability.Actions.ConstructAction.BooleanInput.SetBooleanDelegate(SetFullCircle);
fullCircle.GetBooleanEvent += new CADability.Actions.ConstructAction.BooleanInput.GetBooleanDelegate(GetFullCircle);
copiesAngle = new AngleInput("CopyCircularObjects.CopiesAngle", copAngle);
copiesAngle.ReadOnly = !partOfCircle;
copiesAngle.Optional = !partOfCircle;
copiesAngle.SetAngleEvent += new CADability.Actions.ConstructAction.AngleInput.SetAngleDelegate(SetCopAngle);
copiesAngle.GetAngleEvent += new CADability.Actions.ConstructAction.AngleInput.GetAngleDelegate(GetCopAngle);
copiesAngle.CalculateAngleEvent += new CADability.Actions.ConstructAction.AngleInput.CalculateAngleDelegate(CalculateCopAngle);
BooleanInput rotObject = new BooleanInput("CopyCircularObjects.ObjectsRotation", "CopyCircularObjects.ObjectsRotation.Values");
rotObject.SetBooleanEvent += new CADability.Actions.ConstructAction.BooleanInput.SetBooleanDelegate(SetObjectsRotation);
rotObject.GetBooleanEvent += new CADability.Actions.ConstructAction.BooleanInput.GetBooleanDelegate(GetObjectsRotation);
base.SetInput(rotPoint, copiesCount, fullCircle, copiesAngle, rotObject);
base.OnSetAction();
showCirc();
}
public bool HasInt(byte i_Key)
{
for (int index = 0; index < m_Ints.Count; ++index)
{
IntInput intInput = m_Ints[index];
if (intInput.key == i_Key)
{
return(true);
}
}
return(false);
}
private int GetIntInputIndex(byte i_Key)
{
for (int index = 0; index < m_Ints.Count; ++index)
{
IntInput intInput = m_Ints[index];
if (intInput.key == i_Key)
{
return(index);
}
}
return(-1);
}
public bool GetIntInput(int i_Index, out IntInput o_IntInput)
{
if (!IsValidIntIndex(i_Index))
{
o_IntInput = new IntInput(0, 0);
return(false);
}
IntInput intInput = m_Ints[i_Index];
o_IntInput = new IntInput(intInput);
return(true);
}
public override void OnSetAction()
{
// The title appears in the control center
base.TitleId = "Constr.SplitCurve";
CurveInput curveInput = null;
if (theCurve == null)
{
curveInput = new CurveInput("Constr.SplitCurve.Curve");
curveInput.MouseOverCurvesEvent += new CurveInput.MouseOverCurvesDelegate(OnMouseOverCurves);
}
IntInput numberInput = new IntInput("Constr.SplitCurve.Count");
numberInput.SetIntEvent += new IntInput.SetIntDelegate(OnSetNumber);
numberInput.SetMinMax(2, 100, false);
numberInput.GetIntEvent += new IntInput.GetIntDelegate(OnGetNumber);
MultipleChoiceInput modeInput = new MultipleChoiceInput("Constr.SplitCurve.Mode", "Constr.SplitCurve.Mode.Values");
// |prozentual|Längen
modeInput.SetChoiceEvent += new MultipleChoiceInput.SetChoiceDelegate(OnSetMode);
distances = new InputContainer("Constr.SplitCurve.Distances");
RefreshDistances();
if (theCurve == null)
{
base.SetInput(curveInput, numberInput, modeInput, distances);
}
else
{
base.SetInput(numberInput, modeInput, distances);
}
base.OnSetAction();
Recalc();
}
public static IntInput UsersInput(string prompt, int lower, int upper)
{
bool valid = false;
IntInput output = new IntInput();
Console.WriteLine($"{prompt}");
do
{
Console.Write($"-- ");
try
{
var input = Console.ReadLine();
if (input == "q")
{
output = new IntInput(true);
valid = true;
}
else
{
var i = int.Parse(input);
if ((i >= lower) && (i <= upper))
{
output = new IntInput(i);
valid = true;
}
}
}
catch (FormatException)
{
}
} while (!valid);
return(output);
}
public static MethodResult AdjustGold(object sender, IEventInput input)
{
var gold = EngineGlobals.DataManager.GetVariable("{gold}");
IntInput temp = new IntInput();
if (input is IntInput)
{
temp = (IntInput)input;
}
else
{
EquestriEngine.ErrorMessage = "Invalid input passed into Adjust Gold";
}
var newGoldDisplay = new SystemWidgets.GoldDisplay(gold.AsInt, temp.Input);
GameReference.WidgetDrawer.AddWidget(newGoldDisplay);
gold.AsInt += temp.Input;
return(MethodResult.Success);
}
public static MethodResult AdjustGold(object sender, IEventInput input)
{
var gold = DataManager.GetVariable("{gold}");
IntInput temp = new IntInput();
if (input is IntInput)
{
temp = (IntInput)input;
}
else
{
EquestriEngine.ErrorMessage = "Invalid input passed into Adjust Gold";
}
if (sender is Achievement /*|| sender is Objects.GameObjects.NPC*/)
{
var newGoldDisplay = new SystemWidgets.GoldDisplay(gold.AsInt, temp.Input);
GameReference.WidgetDrawer.AddWidget(newGoldDisplay);
}
gold.AsInt += temp.Input;
TryContinueList();
return(MethodResult.Success);
}
public static Data.Inputs.MethodParamPair GenerateMethodFromString(string input)
{
Data.Inputs.MethodParamPair output = null;
string[] temp = input.Split(';');
string methodName = temp[0].ToLower();
switch (methodName)
{
case "addgold":
{
if (temp.Length != 2)
{
throw new Data.Exceptions.EngineException("Incorrect number of parameters passed", false);
}
try
{
MethodParamResult method = AdjustGold;
IntInput parameter = new IntInput();
parameter.Input = int.Parse(temp[1]);
output = new MethodParamPair(method, parameter);
}
catch
{
EquestriEngine.ErrorMessage = "Error Creating MethodParamPair";
}
break;
}
case "addexp":
{
MethodParamResult method = AdjustGold;
IntInput parameter = new IntInput();
parameter.Input = int.Parse(temp[1]);
output = new MethodParamPair(method, parameter);
break;
}
case "toggleswitch":
{
if (temp.Length != 2)
{
throw new Data.Exceptions.EngineException("Incorrect number of parameters passed", false);
}
MethodParamResult method = ToggleSwitch;
StringInput parameter = new StringInput();
parameter.Input = temp[1];
output = new MethodParamPair(method, parameter);
break;
}
case "activateswitch":
{
if (temp.Length != 2)
{
throw new Data.Exceptions.EngineException("Incorrect number of parameters passed", false);
}
break;
}
case "deactivateswitch":
{
if (temp.Length != 2)
{
throw new Data.Exceptions.EngineException("Incorrect number of parameters passed", false);
}
break;
}
default:
throw new Data.Exceptions.EngineException("Method name Not Found", false);
}
return(output);
}
public static void Wait(object sender, IEventInput input)
{
IntInput IInput = (IntInput)input;
System.Threading.Thread.Sleep(IInput.Input);
}
public IntInput(IntInput i_Original)
{
m_Key = i_Original.key;
m_Value = i_Original.value;
}
/// <summary>
/// Overrides <see cref="CADability.Actions.ConstructAction.OnSetAction ()"/>
/// </summary>
public override void OnSetAction()
{
base.TitleId = "CopyMatrixObjects";
BoundingRect result = originals.GetExtent(Frame.ActiveView.ProjectedModel.Projection, true, false);
centerPoint = base.ActiveDrawingPlane.ToGlobal(result.GetCenter());
distX = result.Width;
distY = result.Height;
// da oben static private, werden diese Variablen gemerkt. Beim ersten Mal vorbesetzen:
if ((horRight == 0) & (horLeft == 0) & (verUp == 0) & (verDown == 0))
{
horRight = 3;
verUp = 2;
}
// da oben static private, wird diese Variable gemerkt. Beim ersten Mal vorbesetzen:
if (dirV.IsNullVector())
{
dirV = new GeoVector(1.0, 0.0, 0.0);
}
IntInput horCountRight = new IntInput("CopyMatrixObjects.HorCountRight", horRight);
horCountRight.SetMinMax(0, int.MaxValue, true);
horCountRight.SetIntEvent += new CADability.Actions.ConstructAction.IntInput.SetIntDelegate(SetHorCountRight);
// horCountRight.CalculateIntEvent +=new CADability.Actions.ConstructAction.IntInput.CalculateIntDelegate(CalcHorCountRight);
IntInput verCountUp = new IntInput("CopyMatrixObjects.VerCountUp", verUp);
verCountUp.SetMinMax(0, int.MaxValue, true);
verCountUp.SetIntEvent += new CADability.Actions.ConstructAction.IntInput.SetIntDelegate(SetVerCountUp);
// verCountUp.CalculateIntEvent +=new CADability.Actions.ConstructAction.IntInput.CalculateIntDelegate(CalcVerCountUp);
horDist = new LengthInput("CopyMatrixObjects.HorDist", distX);
horDist.SetDistanceFromLine(centerPoint, centerPoint + (dirV ^ base.ActiveDrawingPlane.Normal));
horDist.SetLengthEvent += new CADability.Actions.ConstructAction.LengthInput.SetLengthDelegate(SetHorDist);
verDist = new LengthInput("CopyMatrixObjects.VerDist", distY);
verDist.SetDistanceFromLine(centerPoint, centerPoint + dirV);
verDist.SetLengthEvent += new CADability.Actions.ConstructAction.LengthInput.SetLengthDelegate(SetVerDist);
GeoVectorInput dir = new GeoVectorInput("CopyMatrixObjects.Direction", dirV);
dir.Optional = true;
dir.SetVectorFromPoint(centerPoint);
dir.SetGeoVectorEvent += new CADability.Actions.ConstructAction.GeoVectorInput.SetGeoVectorDelegate(SetDir);
dir.IsAngle = true;
IntInput horCountLeft = new IntInput("CopyMatrixObjects.HorCountLeft", horLeft);
horCountLeft.SetMinMax(0, int.MaxValue, true);
horCountLeft.Optional = true;
horCountLeft.SetIntEvent += new CADability.Actions.ConstructAction.IntInput.SetIntDelegate(SetHorCountLeft);
// horCountLeft.CalculateIntEvent +=new CADability.Actions.ConstructAction.IntInput.CalculateIntDelegate(CalcHorCountLeft);
IntInput verCountDown = new IntInput("CopyMatrixObjects.VerCountDown", verDown);
verCountDown.SetMinMax(0, int.MaxValue, true);
verCountDown.Optional = true;
verCountDown.SetIntEvent += new CADability.Actions.ConstructAction.IntInput.SetIntDelegate(SetVerCountDown);
// verCountDown.CalculateIntEvent +=new CADability.Actions.ConstructAction.IntInput.CalculateIntDelegate(CalcVerCountDown);
base.SetInput(horCountRight, verCountUp, horDist, verDist, dir, horCountLeft, verCountDown);
base.OnSetAction();
showMatrix();
}
