/// <summary>
/// 获取阻抗 Impedance_Lists
/// path: 由于获取阻抗是 STACKUP 中取
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void GetImpedance_Lists2()
{
//stackup 获取阻抗
stackup = theJob.Stackup();
int totalImpCon;
int totalImpLin;
totalImpCon = 0;
totalImpLin = 0;
//IImpedanceConstraint
foreach (IImpedanceConstraint impCon in stackup.ImpedanceConstraints())
{
totalImpCon = totalImpCon + 1;
}
jobNum_IMP_ITEM = totalImpCon;
Dictionary <string, string>[] dictImpCon = new Dictionary <string, string> [totalImpCon];
Dictionary <string, string>[] dictImpLin = new Dictionary <string, string> [totalImpLin];
for (int dictImpConLength = 0; dictImpConLength < dictImpCon.Length; dictImpConLength++)
{
dictImpCon[dictImpConLength] = new Dictionary <string, string>();
}
for (int dictImpLinLength = 0; dictImpLinLength < dictImpLin.Length; dictImpLinLength++)
{
dictImpLin[dictImpLinLength] = new Dictionary <string, string>();
}
int i;
i = 0;
try
{
foreach (IImpedanceConstraint impCon in stackup.ImpedanceConstraints())
{
Dictionary <string, string> dictAllImpCon = new Dictionary <string, string>();
XmlGenerate.AllAttrGetKeyValues(impCon, dictAllImpCon);
//阻抗模型 取值 OK
//编号取层 OK
//字段取值 NOT NUM_SIGNAL="待确定"
int modecode = (int)Enum.Parse(typeof(XmlGenerate.ImdependenceModel), impCon.ModelName(), true);
//字段取值
//string modelname=impCon.ModelName();
//信号层
ICopperLayer trace_layer;
trace_layer = impCon.ControlledTraceLayer();
string tracelayer = trace_layer.Name();
if (tracelayer == "COMP")
{
tracelayer = "1";
}
else if (tracelayer == "SOLD")
{
tracelayer = jobName.Substring(2, 2);
}
//参考层 TopModelLayer BottomModelLayer
ICopperLayer copperLayertop;
ICopperLayer copperLayerbot;
copperLayertop = impCon.TopModelLayer();
copperLayerbot = impCon.BottomModelLayer();
string reftop;
string refbot;
if (impCon.TopModelLayer() is null)
{
reftop = "0";
}
else
{
reftop = copperLayertop.Name();
}
if (impCon.BottomModelLayer() is null)
{
refbot = "0";
}
else
{
refbot = copperLayerbot.Name();
}
//7和8这个模型，单独只取BOTTOM_MODEL_LAYER可行 时间：2019年7月22日22:26:26
if (modecode == 7 || modecode == 8)
{
reftop = "0";
refbot = copperLayerbot.Name();
}
if (reftop == "COMP")
{
reftop = "1";// L去掉
}
else if (reftop == "SOLD")
{
reftop = "" + jobName.Substring(2, 2);
}
if (refbot == "COMP")
{
refbot = "1";
}
else if (refbot == "SOLD")
{
refbot = "" + jobName.Substring(2, 2);
}
// 字段： 区分单根双根阻抗 NUM_SIGNAL 待确定
// 字段：目标阻抗值 ZO_TARGET CalculationRequiredImpedance()
//发现一个问题： 客户要求阻抗不在JOB中
double omCustomer = impCon.CustomerRequiredImpedance(AvailableUnits.OHMS);
double LWCustomer = impCon.OriginalTraceWidth(AvailableUnits.MIL);
double LSCopCustomer = impCon.CustomerRequiredCoplanarSpacing(AvailableUnits.MIL);
double LSDifCustomer = impCon.CustomerRequiredDifferentialSpacing(AvailableUnits.MIL);
double omdouble = impCon.CalculationRequiredImpedance(AvailableUnits.OHMS);
double omtol = omdouble * 0.1;
string omstring = impCon.CalculationRequiredImpedance(AvailableUnits.OHMS).ToString();
// 字段： 目标阻抗值公差 ZO_TOL （10%） CalculationRequiredImpedancePlusTol CalculationRequiredImpedanceMinusTol
string tolp = impCon.CalculationRequiredImpedancePlusTol(AvailableUnits.OHMS).ToString();
string tolm = impCon.CalculationRequiredImpedanceMinusTol(AvailableUnits.OHMS).ToString();
//字段： 设计线宽 WIDTH_DESIGN CALCULATION_REQ_TRACE_WIDTH
//已更改
double width_double = impCon.CalculationReqLineWidth(AvailableUnits.MIL);
string width = impCon.CalculationReqLineWidth(AvailableUnits.MIL).ToString();
//设计间距(差分间距) SPACE_DESIGN DIFF_SPACE_
//共面阻抗间距 COPLANAR_SPACE_DESIGN COPLANARITY_SPACE_
bool cop = impCon.IsNullCustomerRequiredCoplanarSpacing();
bool sx = impCon.IsNullCustomerRequiredDifferentialSpacing();
//返回值即可 UDAS属性 值
//设计间距(差分间距) SPACE_DESIGN DIFF_SPACE_
//共面阻抗间距 COPLANAR_SPACE_DESIGN COPLANARITY_SPACE_
dictImpCon[i].Add("ITEM_INDEX", (i + 1).ToString());
dictImpCon[i].Add("IMP_MODEL_NO", modecode.ToString());
dictImpCon[i].Add("SIGNAL_LAYER", tracelayer.Replace("L", ""));//删除L
dictImpCon[i].Add("REF_LAYER_1", reftop.Replace("L", ""));
dictImpCon[i].Add("REF_LAYER_2", refbot.Replace("L", ""));
if (LSDifCustomer > 0)
{
dictImpCon[i].Add("NUM_SIGNAL", "2");
}
else if (LSDifCustomer == 0)
{
dictImpCon[i].Add("NUM_SIGNAL", "1");
}
//dictImpCon[i].Add("NUM_SIGNAL", (width_double > 0 ? "2" : "1"));
//dictImpCon[i].Add("NUM_SIGNAL", " "); //待确定 omCustomer
dictImpCon[i].Add("ZO_TARGET", omCustomer.ToString());
//客户要求阻抗
dictImpCon[i].Add("ZO_TOL", (omCustomer * 0.1).ToString());
//dictImpCon[i].Add("ZO_TOL", omtol.ToString());
dictImpCon[i].Add("WIDTH_DESIGN", LWCustomer.ToString());
//LSCopCustomer
dictImpCon[i].Add("SPACE_DESIGN", LSDifCustomer.ToString());
//dictImpCon[i].Add("SPACE_DESIGN", dictAllImpCon["DIFF_SPACE_"]);
dictImpCon[i].Add("COPLANAR_SPACE_DESIGN", LSCopCustomer.ToString());
//dictImpCon[i].Add("COPLANAR_SPACE_DESIGN", dictAllImpCon["COPLANARITY_SPACE_"]);
i++;
}
listIMP_ITEMT = new List <Dictionary <string, string> >();
foreach (var item in dictImpCon)
{
listIMP_ITEMT.Add(item);
}
}
catch (Exception ex)
{
string str = ex.ToString();
//throw;
}
}
/// <summary>
/// 获取Materials
/// 已获取，保存数据即可
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void GetMaterial()
{
//根据MRP_NAME 属性 去掉重复的 Material FOIL CORE PREPREG
Dictionary <string, string> dictFoilMrpName = new Dictionary <string, string>();
Dictionary <string, string> dictPrepregMrpName = new Dictionary <string, string>();
Dictionary <string, string> dictCoreMrpName = new Dictionary <string, string>();
//根据MRP_NAME 属性 去掉重复的 Material FOIL CORE PREPREG
Dictionary <string, string> dictFoilMrpName_N = new Dictionary <string, string>();
Dictionary <string, string> dictPrepregMrpName_N = new Dictionary <string, string>();
Dictionary <string, string> dictCoreMrpName_N = new Dictionary <string, string>();
int Total_Core = 0;
int Total_Foil = 0;
int Total_Prepreg = 0;
stackup = theJob.Stackup();//job->stackup
//1、获取数组的长度 {CORE}[X] [FOIL][X] <PREPREG>[X]
foreach (IStackupSegment seg in stackup.BuildUpSegments()) //stackup->stksegements->stksegement
{
//***************生成stakupsegment
seg.SegmentIndex();
seg.SegmentType();
//seg.JobMaterials(); //stackupsegement
foreach (IJobMaterial jobmat in seg.JobMaterials()) //stksegement->jobmaterials
{
IMaterial mat = jobmat.Material(); //jobmaterials->jobmaterial
//***************生成stakupsegment
mat.MrpName();
if (mat.MtrType() == MtrType.CORE_MTR)//material->分类 material(CORE)
{
if (!dictCoreMrpName.Keys.Contains(mat.MrpName()))
{
dictCoreMrpName.Add(mat.MrpName(), "第" + (Total_Core + 1).ToString() + "种类别的" + mat.MtrType() + ": " + mat.MrpName());
Total_Core++;
}
}
if (mat.MtrType() == MtrType.FOIL_MTR)//material->分类 material(CORE)
{
if (!dictFoilMrpName.Keys.Contains(mat.MrpName()))
{
dictFoilMrpName.Add(mat.MrpName(), "第" + (Total_Foil + 1).ToString() + "种类别的" + mat.MtrType() + ": " + mat.MrpName());
Total_Foil++;
}
}
if (mat.MtrType() == MtrType.PREPREG_MTR)//material->分类 material(CORE)
{
if (!dictPrepregMrpName.Keys.Contains(mat.MrpName()))
{
dictPrepregMrpName.Add(mat.MrpName(), "第" + (Total_Prepreg + 1).ToString() + "种类别的" + mat.MtrType() + ": " + mat.MrpName());
Total_Prepreg++;
}
}
}
}
//2 给键值对数组建立固定数组赋初值
Dictionary <string, dynamic> udaObj = new Dictionary <string, dynamic>();
Dictionary <string, string>[] dictFoil = new Dictionary <string, string> [Total_Foil];
Dictionary <string, string>[] dictCore = new Dictionary <string, string> [Total_Core];
Dictionary <string, string>[] dictPrepreg = new Dictionary <string, string> [Total_Prepreg];
for (int arrayLenth = 0; arrayLenth < dictFoil.Length; arrayLenth++)
{
dictFoil[arrayLenth] = new Dictionary <string, string>();
}
for (int arrayLenth = 0; arrayLenth < dictCore.Length; arrayLenth++)
{
dictCore[arrayLenth] = new Dictionary <string, string>();
}
for (int arrayLenth = 0; arrayLenth < dictPrepreg.Length; arrayLenth++)
{
dictPrepreg[arrayLenth] = new Dictionary <string, string>();
}
//给键值对数组 添加指定属性的元素
//数组下标
int i, j, k;
i = 0;
j = 0;
k = 0;
try
{
foreach (IStackupSegment seg in stackup.BuildUpSegments()) //stackup->stksegements->stksegement
{
foreach (IJobMaterial jobmat in seg.JobMaterials()) //stksegement->jobmaterials
{
IMaterial mat = jobmat.Material(); //jobmaterials->jobmaterial
//base_Material = mat.Family();
if (mat.MtrType() == MtrType.FOIL_MTR) //material->分类 material(CORE)
{
//针对CORE属性 1、CORE所有属性 2、属性筛选 3、添加键值对
IFoil foil = mat.Foil();
Dictionary <string, string> dictAllFoil = new Dictionary <string, string>();
XmlGenerate.AllAttrGetKeyValues(foil, dictAllFoil);
XmlGenerate.AllAttrGetKeyValues(mat, dictAllFoil);
//Base_Material = dictAllFoil["FAMILY"];
string[] a = attrsMaterialsFoil;
string[] b = attrsMaterialsFoil_Inplan;
int length = 0;
if (a.Length == b.Length)
{
length = a.Length;
}
else
{
string str = "请检查是否数组长度定义一一对应";
}
if (!dictFoilMrpName_N.Keys.Contains(dictAllFoil["MRP_NAME"]))
{
dictFoilMrpName_N.Add(dictAllFoil["MRP_NAME"], "第" + (i + 1).ToString() + "种类别的" + mat.MtrType() + ": " + dictAllFoil["MRP_NAME"]);
for (int l = 0; l < length; l++)
{
dictFoil[i].Add(a[l], dictAllFoil[b[l]]);
}
i++;
}
string debug = "";
}
if (mat.MtrType() == MtrType.PREPREG_MTR)//material->分类 material(CORE)
{
IPrepreg prepreg = mat.Prepreg();
Dictionary <string, string> dictAllPrepreg = new Dictionary <string, string>();
XmlGenerate.AllAttrGetKeyValues(prepreg, dictAllPrepreg);
XmlGenerate.AllAttrGetKeyValues(mat, dictAllPrepreg);
base_Material = dictAllPrepreg["FAMILY"];
string[] a = attrsMaterialsPrepreg;
string[] b = attrsMaterialsPrepreg_Inplan;
int length = 0;
if (a.Length == b.Length)
{
length = a.Length;
}
else
{
string str = "请检查是否数组长度定义一一对应";
}
if (!dictPrepregMrpName_N.Keys.Contains(dictAllPrepreg["MRP_NAME"]))
{
dictPrepregMrpName_N.Add(dictAllPrepreg["MRP_NAME"], "第" + (j + 1).ToString() + "种类别的" + mat.MtrType() + ": " + dictAllPrepreg["MRP_NAME"]);
for (int l = 0; l < length; l++)
{
dictPrepreg[j].Add(a[l], dictAllPrepreg[b[l]]);
}
j++;
}
string debug = "";
}
if (mat.MtrType() == MtrType.CORE_MTR)//material->分类 material(CORE)
{
ICore core = mat.Core();
Dictionary <string, string> dictAllCore = new Dictionary <string, string>();
XmlGenerate.AllAttrGetKeyValues(core, dictAllCore);
XmlGenerate.AllAttrGetKeyValues(mat, dictAllCore);
base_Material = dictAllCore["FAMILY"];
string[] a = attrsMaterialsCore;
string[] b = attrsMaterialsCore_Inplan;
int length = 0;
if (a.Length == b.Length)
{
length = a.Length;
}
else
{
string str = "请检查是否数组长度定义一一对应";
}
if (!dictCoreMrpName_N.Keys.Contains(dictAllCore["MRP_NAME"]))
{
dictCoreMrpName_N.Add(dictAllCore["MRP_NAME"], "第" + (k + 1).ToString() + "种类别的" + mat.MtrType() + ": " + dictAllCore["MRP_NAME"]);
for (int l = 0; l < length; l++)
{
dictCore[k].Add(a[l], dictAllCore[b[l]]);
}
k++;
}
string debug = "";
}
}
}
//对应XML子节点个数
jobNum_FOIL = Total_Foil;
jobNum_PREPREG = Total_Prepreg;
jobNum_CORE = Total_Core;
jobNum_STACKUP_SEG = Total_Foil + Total_Prepreg + Total_Core;
listFoilT = new List <Dictionary <string, string> >();
listPrepregT = new List <Dictionary <string, string> >();
listCoreT = new List <Dictionary <string, string> >();
foreach (var item in dictFoil)
{
listFoilT.Add(item);
}
foreach (var item in dictPrepreg)
{
listPrepregT.Add(item);
}
foreach (var item in dictCore)
{
listCoreT.Add(item);
}
dictFoilT = dictFoil;
dictPrepregT = dictPrepreg;
dictCoreT = dictCore;
}
catch (Exception ex)
{
string exmess = ex.ToString();
//throw;
}
}