/// <summary>
/// Bind part to owner
/// 1.Update COAStatus, Status=A1
///2.记录COALOG
///3.Product.COAID=Code
/// </summary>
/// <param name="part">part</param>
/// <param name="owner">owner</param>
public override void BindTo(IProductPart part, IPartOwner owner)
{
// if (!part.ValueType.Equals(("SN")))
// {
// base.BindTo(part, owner);
// return;
// }
var product = (IProduct)owner;
Session session = SessionManager.GetInstance.GetSession(product.ProId, Session.SessionType.Product);
var productRepoistory = RepositoryFactory.GetInstance().GetRepository<IProductRepository, IProduct>();
var coaRepository = RepositoryFactory.GetInstance().GetRepository<ICOAStatusRepository, COAStatus>();
COAStatus coa = coaRepository.Find(part.Value);
//1
coa.Status = COAStatus.COAStatusConst.A1;
//2
var log = new COALog
{
COASN = coa.COASN,
StationID = session.Station,
LineID = session.Line,
Editor = session.Editor,
Cdt = DateTime.Now
};
coa.addCOALog(log);
//3
product.COAID = part.Value;
coaRepository.Update(coa, session.UnitOfWork);
productRepoistory.Update(product, session.UnitOfWork);
}
public void BindTo(PartUnit part, IPartOwner owner, string station, string editor, string key)
{
#if DEBUG
ISaveModule saver = (ISaveModule)GetInstance(_saveModule, typeof(ISaveModule));
#else
ISaveModule saver = PartSpecialCodeContainer.GetInstance.GetSaveModule(_saveModule);
#endif
if (saver != null)
{
saver.Save(part, owner, station, key);
}
if (NeedCommonSave)
{
IProductPart newPart = new ProductPart();
newPart.PartSn = part.Sn; //sn
newPart.PartID = part.Pn; //pn
newPart.BomNodeType = part.Type; //BomNodeType
newPart.PartType = part.ValueType; //part.Type
newPart.CheckItemType = part.ItemType; //CheckItemType
newPart.CustomerPn = part.CustPn??string.Empty;
newPart.Iecpn = part.IECPn??string.Empty;
newPart.Station = station;
newPart.Editor = editor;
owner.AddPart(newPart);
}
}
public override void BindTo(IProductPart part, IPartOwner owner)
{
var product = (IProduct)owner;
Session session = SessionManager.GetInstance.GetSession(product.ProId, Session.SessionType.Product);
var productRepoistory = RepositoryFactory.GetInstance().GetRepository<IProductRepository, IProduct>();
product.IMEI = part.Value;
productRepoistory.Update(product, session.UnitOfWork);
}
/// <summary>
/// Check Vendor CT是否有结合厂内CT：Table:TSB..KPDet_LCM 灯管
/// 唯一性检查:只能与一个ProId绑定
/// </summary>
/// <param name="part"></param>
/// <param name="owner"></param>
public override void Check(IMES.FisObject.Common.BOM.IBOMPart part, IPartOwner owner)
{
//Check Vendor CT是否有结合厂内CT：Table:TSB..KPDet_LCM 灯管
//todo: how to check
int i;
//唯一性检查:只能与一个ProId绑定
base.Check(part, owner);
}
/// <summary>
/// 默认的PartCheck实现，只进行唯一性检查
/// </summary>
/// <param name="part">需要check的part</param>
/// <param name="owner">PartOwner</param>
public virtual void Check(IBOMPart part, IPartOwner owner, string station)
{
PartCheck checkSetting = this.GetPartCheckSettingData(part.ValueType);
if (checkSetting == null)
{
string msg = string.Format("PartCheck data of {0} type does not exist.", part.Type);
Exception ex = new Exception(msg);
throw ex;
}
if (checkSetting.NeedCheck == 1)
{
string realSn = ProductPart.PartSpecialDeal(part.Type, part.ValueType, part.MatchedSn);
owner.PartUniqueCheck(part.PN, realSn);
}
}
/// <summary>
/// 将part绑定到Product/MB的默认实现，即直接绑定至owner
/// </summary>
/// <param name="part">part</param>
/// <param name="owner">owner</param>
public virtual void BindTo(IProductPart part, IPartOwner owner)
{
PartCheck checkSetting = this.GetPartCheckSettingData(part.ValueType);
if (checkSetting == null)
{
string msg = string.Format("PartCheck data of {0} type does not exist.", part.PartType);
Exception ex = new Exception(msg);
throw ex;
}
part = ProductPart.PartSpecialDeal(part);
if (checkSetting.NeedSave == 1)
{
owner.AddPart(part);
}
}
public void Save(IPartOwner owner, string station, string editor, string key)
{
foreach (PartUnit partUnit in CheckedPart)
{
Save(partUnit, owner, station, editor, key);
}
}
public void Save(PartUnit pu, IPartOwner owner, string station, string editor, string key)
{
if (PartPolicy != null)
{
//Vincent add check customize need save
//bool saveFlag = true;
//if (_needSave.HasValue)
//{
// saveFlag = _needSave.Value;
//}
//if (saveFlag)
//{
PartPolicy.BindTo(pu, owner, station, editor, key, _needCommonSave, _needSave);
//}
}
}
public void Check(PartUnit pu, IPartOwner owner, string station, IFlatBOM bom)
{
if (PartPolicy != null)
{
PartPolicy.Check(pu, this, owner, station, bom);
}
}
public void Check(PartUnit pu, IPartOwner owner, string station)
{
if (CurrentMatchedBomItem.RelationBomItem != null)
{
int relationQty = CurrentMatchedBomItem.RelationBomItem.CheckedPart.Count;
int checkedQty = CurrentMatchedBomItem.CheckedPart.Count;
if (relationQty == 0 ||
checkedQty >= relationQty)
{
throw new FisException("BOM002", new string[] { CurrentMatchedBomItem.RelationBomItem.Descr ?? string.Empty });
}
}
CurrentMatchedBomItem.Check(pu, owner, station, this);
}
/// <summary>
/// Part检查，通常包括唯一性检查等
/// </summary>
/// <param name="owner">owner</param>
/// <param name="station">station</param>
public void Check(IPartOwner owner, string station)
{
this.PartStrategy.Check(this, owner, station);
}
/// <summary>
/// Bind pat to owner:
/// A.Product.PCBID=mb sn#
///B.需要修改MB 的PCA..PCBStatus.Station = 32
///C.记录MB Log Inert PCA..PCBLog
///D.将MB相关信息写入Product表:
///Product.PCBModel=PCA..PCB.PCBModelID
///Product. MAC =PCA..PCB. MAC
///Product. UUID =PCA..PCB. UUID
///Product. MBECR =PCA..PCB. ECR
/// </summary>
/// <param name="part">part</param>
/// <param name="owner">owner</param>
public override void BindTo(IProductPart part, IPartOwner owner)
{
// if (!part.ValueType.Equals(("SN")))
// {
// base.BindTo(part, owner);
// return;
// }
var product = (IProduct)owner;
Session session = SessionManager.GetInstance.GetSession(product.ProId, Session.SessionType.Product);
var productRepoistory = RepositoryFactory.GetInstance().GetRepository<IProductRepository, IProduct>();
var mbRepository = RepositoryFactory.GetInstance().GetRepository<IMBRepository, IMB>();
var mb = mbRepository.Find(part.Value);
string line = string.IsNullOrEmpty(session.Line) ? product.Status.Line : session.Line;
//A
product.PCBID = mb.Sn;
//B
var status = new MBStatus(mb.Key.ToString(), "32", MBStatusEnum.Pass , session.Editor, line, DateTime.Now, DateTime.Now);
mb.MBStatus = status;
//C
var mbLog = new MBLog(
0,
mb.Sn,
mb.Model,
"32",
1,
line,
session.Editor,
DateTime.Now);
mb.AddLog(mbLog);
//D
product.PCBModel = mb.Model;
product.MAC = mb.MAC;
product.UUID = mb.UUID;
product.MBECR = mb.ECR;
product.CVSN = mb.CVSN;
mbRepository.Update(mb, session.UnitOfWork);
productRepoistory.Update(product, session.UnitOfWork);
}
/// <summary>
/// update part owner
/// </summary>
/// <param name="owner"></param>
protected void UpdatePartOwner(IPartOwner owner)
{
//PVS站需要通过Product找到Pizza，此时PartOwner和MainObject不再是同一个对象Product是MainObject，Pizza是PartOwner
if (this.Station.Equals("8E") || this.Station.Equals("PZ")) //PVS
{
IPizzaRepository repPizza = RepositoryFactory.GetInstance().GetRepository<IPizzaRepository, Pizza>();
repPizza.Update((Pizza)owner, CurrentSession.UnitOfWork);
}
else
{
this.UpdateMainObject(owner);
}
}
/// <summary>
/// 1.COA是可用状态(COAStatus.Status = P1 or A2 or A3)
/// 注：
/// 最后的实现按宋杰在Unit Label Print UC中的描述完成：
/// COAStatus.COASN=code and COAStatus.Line=@PdLine and COAStatus.Status为P2或A2、A3
/// </summary>
/// <param name="part">需要check的part</param>
/// <param name="owner">PartOwner</param>
public override void Check(IBOMPart part, IPartOwner owner, string station)
{
// if (!part.ValueType.Equals(("SN")))
// {
// base.Check(part, owner, station);
// return;
// }
Session session = SessionManager.GetInstance.GetSession(((IProduct)owner).ProId, Session.SessionType.Product);
var coaRepository = RepositoryFactory.GetInstance().GetRepository<ICOAStatusRepository, COAStatus>();
COAStatus coa = coaRepository.Find(part.MatchedSn);
if (
(!coa.Status.Equals(COAStatus.COAStatusConst.A2)
&& !coa.Status.Equals(COAStatus.COAStatusConst.A3)
&& !coa.Status.Equals(COAStatus.COAStatusConst.P2)
)
|| !coa.LineID.Equals(session.Line)
)
{
List<string> erpara = new List<string>();
erpara.Add(part.MatchedSn);
var ex = new FisException("CHK046", erpara);
throw ex;
}
}
/// <summary>
/// Check part:
///A.Code(3) in ‘0123456789’
/// Code(4) in ‘0123456789ABC’
/// Code(5) in A：AOI (A面)
/// M：MB (B面)
/// V ：VGA/B
///B.按照process定义来判断MB是否能与ProId进行绑定，可以进入32站
///C.MB SN#前两码=TC阶model的MB属性
/// </summary>
public override void Check(IBOMPart part, IPartOwner owner, string station)
{
// if (!part.ValueType.Equals(("SN")))
// {
// base.Check(part, owner, station);
// return;
// }
IProduct product = (IProduct)owner;
//A. Check MB Sn format
// const string code3Range = "0123456789";
// const string code4Range = "0123456789ABC";
// const string code5Range = "AMV";
//
// if (!code3Range.Contains(part.MatchedSn.Substring(2, 1))
// || !code4Range.Contains(part.MatchedSn.Substring(3, 1))
// || !code5Range.Contains(part.MatchedSn.Substring(4, 1)))
// {
// List<string> erpara = new List<string>();
// erpara.Add(part.MatchedSn);
// var ex = new FisException("CHK048", erpara);
// throw ex;
// }
//B. Block station fo MB
IProcessRepository processRepository = RepositoryFactory.GetInstance().GetRepository<IProcessRepository, Process>();
Session session = SessionManager.GetInstance.GetSession(product.ProId, Session.SessionType.Product);
processRepository.SFC(session.Line, session.Customer, "32", part.MatchedSn, "MB"); //对于MB，不论在任何站与Product绑定，该站的站号都是32
//C.MB SN#前两码=TC阶model的MB属性
string vbCode = ((IProduct)owner).ModelObj.GetAttribute("MB");
// Vincent 2011-08-04 ModelInfo MB name have more than one MBCode value example MB=A7~A6
//if (part.MatchedSn.Substring(0, 2) != vbCode)
if (!vbCode.Contains(part.MatchedSn.Substring(0, 2)))
{
List<string> erpara = new List<string>();
erpara.Add(part.MatchedSn);
var ex = new FisException("CHK070", erpara);
throw ex;
}
// Check the PCB has been used by other product
IProductRepository productRepository =
RepositoryFactory.GetInstance().GetRepository<IProductRepository, IProduct>();
IList<IProduct> productList = productRepository.GetProductListByPCBID(part.MatchedSn);
if (productList.Count > 0)
{
List<string> erpara = new List<string>();
erpara.Add("MB");
erpara.Add(part.MatchedSn);
erpara.Add("");
var ex = new FisException("CHK009", erpara);
throw ex;
}
// Check the PCB has been used by other product
}
public void Check(PartUnit pu, IFlatBOMItem item, IPartOwner owner, string station, IFlatBOM bom)
{
#if DEBUG
ICheckModule checker = (ICheckModule)GetInstance(_checkModule, typeof(ICheckModule));
#else
ICheckModule checker = PartSpecialCodeContainer.GetInstance.GetCheckModule(_checkModule);
#endif
//已經Binded Part 檢查收集CT是否存在
if (item.HasBinded)
{
if (owner != null)
{
var partNoList = item.AlterParts.Select(x=>x.PN).ToList();
bool hasBinded = owner.CheckPartBinded(pu.ValueType, partNoList, pu.Type, pu.ItemType, pu.Sn);
if (!hasBinded)
{
throw new FisException("MAT011", false, new string[] { pu.Sn, pu.Type, pu.ValueType, pu.ItemType });
}
}
else
{
throw new FisException("MAT012", false, new string[] { pu.Sn, pu.Type, pu.ValueType, pu.ItemType });
}
}
else
{
if (checker != null)
{
checker.Check(pu, item, station);
}
//if have value then replace _needUniqueCheck
if (item.NeedCheckUnique.HasValue)
{
_needUniqueCheck = item.NeedCheckUnique.Value;
}
if (NeedUniqueCheck)
{
//do unique check
//1.part been used on this product (mem)
var checkedParts = bom.GetCheckedPart();
if (checkedParts != null)
{
foreach (PartUnit checkPu in checkedParts)
{
if (pu.Sn == checkPu.Sn)
{
throw new FisException("CHK084", new string[] { pu.Sn });
}
}
}
//2.part been used on other product (db)
if (owner != null)
{
owner.PartUniqueCheck(pu.Pn, pu.Sn);
}
//3.part been used on other product (mem)
}
}
if (NeedPartForbidCheck)
{
IPartRepository partRep = RepositoryFactory.GetInstance().GetRepository<IPartRepository, IPart>();
string noticeMsg = "";
if (partRep.CheckPartForbid(item.PartForbidList, pu.Type, pu.Sn, pu.Pn, out noticeMsg))
{
throw new FisException("CHK1105", new string[] { pu.Type, pu.Pn, pu.Sn, noticeMsg??string.Empty});
}
}
if (_needDefectComponentCheck)
{
IMiscRepository miscRep = RepositoryFactory.GetInstance().GetRepository<IMiscRepository>();
IPartRepository partRep = RepositoryFactory.GetInstance().GetRepository<IPartRepository, IPart>();
IList<IMES.DataModel.SysSettingInfo> SysSettingInfoList = partRep.GetSysSettingInfoes(new IMES.DataModel.SysSettingInfo { name = "DefectComponentPassStatus" });
if (SysSettingInfoList == null || SysSettingInfoList.Count == 0)
{
throw new FisException("PAK095", new string[] { "DefectComponentPassStatus" });
}
string[] passStatus = SysSettingInfoList[0].value.Split(new char[] { '~', ',', ';' });
IList<IMES.DataModel.DefectComponentInfo> DefectComponentInfoList = miscRep.GetData<IMES.Infrastructure.Repository._Metas.DefectComponent, IMES.DataModel.DefectComponentInfo>(new IMES.DataModel.DefectComponentInfo { PartSn = pu.Sn });
if (DefectComponentInfoList != null && DefectComponentInfoList.Count > 0)
{
if (DefectComponentInfoList.Any(x => !passStatus.Contains(x.Status)))
{
throw new FisException("CQCHK1097", new string[] { pu.Sn, string.Join(",", DefectComponentInfoList.Select(x => x.Status).Distinct().ToArray()) });
}
}
}
}
public override void Check(IBOMPart part, IPartOwner owner, string station)
{
//1.在PartSN存在
//2.唯一性检查:只能与一个ProId绑定
base.Check(part, owner, station);
}
/// <summary>
/// 唯一性检查:只能与一个ProId绑定
/// </summary>
/// <param name="part"></param>
/// <param name="owner"></param>
public override void Check(IBOMPart part, IPartOwner owner, string station)
{
//1.在PartSN存在
// IPartSnRepository rep = RepositoryFactory.GetInstance().GetRepository<IPartSnRepository, PartSn>();
// PartSn psn = rep.Find(part.MatchedSn);
// if (psn == null)
// {
// List<string> erpara = new List<string>();
// erpara.Add(part.MatchedSn);
// var ex = new FisException("CHK047");
// throw ex;
// }
//2.唯一性检查:只能与一个ProId绑定
base.Check(part, owner, station);
}
