// Initialize a new instance of the AMD PCNet device driver
public AMDPCNet(PCIDevice device)
{
if (device == null)
{
throw new ArgumentException("PCI Device is null. Unable to get AMD PCNet card");
}
pciCard = device;
// We are handling this device
pciCard.Claimed = true;
// Setup interrupt handling
//Interrupts.IRQ09 += HandleNetworkInterrupt;
//Interrupts.AddIRQHandler(device.InterruptLine, HandleNetworkInterrupt);
// Get IO Address from PCI Bus
io = (Kernel.IOAddressSpace)pciCard.GetAddressSpace(0);
// Enable the card
pciCard.EnableDevice();
// Set the device into 32-bit mode
io.Write32(0x10, 0);
// Get the EEPROM MAC Address and set it as the devices MAC
byte[] eeprom_mac = new byte[6];
UInt32 result = io.Read32(0x00);
eeprom_mac[0] = BinaryHelper.GetByteFrom32bit(result, 0);
eeprom_mac[1] = BinaryHelper.GetByteFrom32bit(result, 8);
eeprom_mac[2] = BinaryHelper.GetByteFrom32bit(result, 16);
eeprom_mac[3] = BinaryHelper.GetByteFrom32bit(result, 24);
result = io.Read32(0x04);
eeprom_mac[4] = BinaryHelper.GetByteFrom32bit(result, 0);
eeprom_mac[5] = BinaryHelper.GetByteFrom32bit(result, 8);
mac = new MACAddress(eeprom_mac);
// Allocate 32 bytes for the 28 byte Initialization block that has to be aligned to a 4 byte boundary
//UInt32 address = Heap.MemAlloc(0x20);
//mInitBlock = new ManagedUInt32Array(7); // 7 UInt32's, aligned on a 4byte boundary
mInitBlock = new ManagedMemorySpace(28, 4);
/*Console.Write("Allocated 32 bytes for initialization block @ 0x" + address.ToHex(8));
* Console.WriteLine("(Aligned to 0x" + aligned_address.ToHex(8) + ")");*/
// Allocate 80 uints for the 16 RX and TX Descriptor rings. These addresses have to be aligned on a 16-byte boundary
mTxDescriptor = new ManagedMemorySpace(256, 16);
mRxDescriptor = new ManagedMemorySpace(256, 16);
/*Console.Write("Allocated 320 bytes for RX ring descriptors @ 0x" + rd_address.ToHex(8));
* Console.WriteLine("(Aligned to 0x" + mRxDescriptorAddress.ToHex(8) + ")");
* Console.Write("Allocated 320 bytes for TX ring descriptors @ 0x" + tx_address.ToHex(8));
* Console.WriteLine("(Aligned to 0x" + mTxDescriptorAddress.ToHex(8) + ")");*/
// Fill in the Initialization block
mInitBlock.Write32(0x00, (0x4 << 28) | (0x4 << 20));
mInitBlock.Write32(0x04, (uint)(eeprom_mac[0] | (eeprom_mac[1] << 8) | (eeprom_mac[2] << 16) | (eeprom_mac[3] << 24)));
mInitBlock.Write32(0x08, (uint)(eeprom_mac[4] | (eeprom_mac[5] << 8)));
mInitBlock.Write32(0x0C, 0x0);
mInitBlock.Write32(0x10, 0x0);
mInitBlock.Write32(0x14, mRxDescriptor.Offset);
mInitBlock.Write32(0x18, mTxDescriptor.Offset);
// Write the Initialization blocks address to the registers on the card
InitializationBlockAddress = mInitBlock.Offset;
// Set the device to PCNet-PCI II Controller mode (full 32-bit mode)
SoftwareStyleRegister = 0x03;
/* Initialize the RX and TX buffers, and set up the RX and TX descriptors to point
* to the buffers. Also, mark the RX descriptors as being owned by the card so data
* can be received in them */
mRxBuffers = new List <ManagedMemorySpace>();
mTxBuffers = new List <ManagedMemorySpace>();
for (uint rxd = 0; rxd < 16; rxd++)
{
uint xOffset = rxd * 16;
ManagedMemorySpace buffer = new ManagedMemorySpace(2048);
mRxDescriptor.Write32(xOffset + 8, buffer.Offset);
UInt16 buffer_len = (UInt16)(~buffer.Size);
buffer_len++;
UInt32 flags = (UInt32)(buffer_len & 0x0FFF) | 0xF000 | 0x80000000;
mRxDescriptor.Write32(xOffset + 4, flags);
mRxBuffers.Add(buffer);
}
for (uint txd = 0; txd < 16; txd++)
{
uint xOffset = txd * 16;
ManagedMemorySpace buffer = new ManagedMemorySpace(2048);
mTxDescriptor.Write32(xOffset + 8, buffer.Offset);
mTxBuffers.Add(buffer);
}
// Set TX Descriptor 0 as the first one to use... Increment this when we use one to use them in a circular fashion
mNextTXDesc = 0;
// Setup our Receive and Transmit Queues
mTransmitBuffer = new Queue <byte[]>();
mRecvBuffer = new Queue <byte[]>();
}
public VT6102(PCIDevice device)
{
if (device == null)
{
throw new ArgumentException("PCI Device is null. Unable to get VIA Rhine-II card");
}
pciCard = device;
// We are handling this device
pciCard.Claimed = true;
// Setup interrupt handling
//Interrupts.IRQ10 += HandleNetworkInterrupt;
//Interrupts.AddIRQHandler(device.InterruptLine, HandleNetworkInterrupt);
// Get IO Address from PCI Bus
io = pciCard.GetAddressSpace(0) as Kernel.IOAddressSpace;
// Enable the card
pciCard.EnableDevice();
// Get the EEPROM MAC Address and set it as the devices MAC
byte[] eeprom_mac = new byte[6];
UInt32 result = io.Read32(0x00);
eeprom_mac[0] = BinaryHelper.GetByteFrom32bit(result, 0);
eeprom_mac[1] = BinaryHelper.GetByteFrom32bit(result, 8);
eeprom_mac[2] = BinaryHelper.GetByteFrom32bit(result, 16);
eeprom_mac[3] = BinaryHelper.GetByteFrom32bit(result, 24);
result = io.Read32(0x04);
eeprom_mac[4] = BinaryHelper.GetByteFrom32bit(result, 0);
eeprom_mac[5] = BinaryHelper.GetByteFrom32bit(result, 8);
mac = new MACAddress(eeprom_mac);
// Software Reset device
SoftwareReset();
// Configure Receive Config
ReceiveConfigRegister = 0x1C;
// Configure Transmit Config
TransmitConfigRegister = 0x04;
// Setup RX Descriptors
mRxDescriptors = new ManagedMemorySpace(256, 16);
// Setup TX Descriptors
mTxDescriptors = new ManagedMemorySpace(256, 16);
/* Initialize the RX and TX buffers, and set up the RX descriptors to point
* to the buffers. Also, mark the RX descriptors as being owned by the card so data
* can be received in them */
mRxBuffers = new List <ManagedMemorySpace>();
for (uint rxd = 0; rxd < 16; rxd++)
{
uint xOffset = rxd * 16;
ManagedMemorySpace buffer = new ManagedMemorySpace(2048);
mRxDescriptors.Write32(xOffset + 12, mRxDescriptors.Offset + xOffset + 16);
mRxDescriptors.Write32(xOffset + 8, buffer.Offset);
mRxDescriptors.Write32(xOffset + 4, buffer.Size);
mRxDescriptors.Write32(xOffset, 0x80000000);
mRxBuffers.Add(buffer);
}
mRxDescriptors.Write32(252, mRxDescriptors.Offset);
for (uint txd = 0; txd < 16; txd++)
{
uint xOffset = txd * 16;
mTxDescriptors.Write32(xOffset + 12, mTxDescriptors.Offset + xOffset + 16);
mTxDescriptors.Write32(xOffset + 8, 0);
mTxDescriptors.Write32(xOffset + 4, 0);
mTxDescriptors.Write32(xOffset, 0);
}
mTxDescriptors.Write32(252, mTxDescriptors.Offset);
mNextTXDesc = 0;
RxDescAddressRegister = mRxDescriptors.Offset;
TxDescAddressRegister = mTxDescriptors.Offset;
// Setup and clear interrupts
IntMaskRegister = 0xFFFF;
IntStatusRegister = 0xFFFF;
// Setup our Receive and Transmit Queues
mTransmitBuffer = new Queue <byte[]>();
mRecvBuffer = new Queue <byte[]>();
}