/// <summary>
/// Export the standalone parts:
/// - The parts made from originals in Links
/// - The Orphan parts: the linked file where the original host element comes from is unloaded.
/// - The Zombie parts: the original host element is deleted from the linked file.
/// </summary>
/// <remarks>
/// This is a temporary workaround to export the parts made from linked elements. It should be refined when linked are supported (LinkedInstance at least.)
/// There are some limitations:
/// The linked element will not export as host, including the relative elements: e.g. windows, doors, openings.
/// The host part cannot export if visibility is set by linked view and has 'Show Original'.
/// The standalone part will skip export if Base Level is set 'Non Associated'.
/// The linked part export cannot be split even if its category is wall or column and 'Split wall or column by story' is checked.
/// </remarks>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="partElement">The standalone part to export.</param>
/// <param name="geometryElement">The goemetry of the part.</param>
/// <param name="productWrapper">The ProductWrapper object.</param>
public static void ExportStandalonePart(ExporterIFC exporterIFC, Element partElement, GeometryElement geometryElement, ProductWrapper productWrapper)
{
Part part = partElement as Part;
if (!ExporterCacheManager.ExportOptionsCache.ExportParts || part == null || geometryElement == null)
{
return;
}
foreach (LinkElementId linkElementId in part.GetSourceElementIds())
{
if (linkElementId.HostElementId != ElementId.InvalidElementId)
{
// Has host element, so should export with host element.
return;
}
if (linkElementId.LinkedElementId != ElementId.InvalidElementId)
{
if (part.LevelId == ElementId.InvalidElementId)
{
// skip the parts have NO Base Level.
continue;
}
IFCExtrusionAxes ifcExtrusionAxes = GetDefaultExtrusionAxesForPart(part);
PartExporter.ExportPart(exporterIFC, partElement, productWrapper, null, null, null, ifcExtrusionAxes, null, null, false);
}
}
}
/// <summary>
/// Export the parts as independent building elements.
/// </summary>
/// <remarks>
/// The function works with AlternateIFCUI and it requires two conditions:
/// 1. Allows export parts: 'current view only' is checked and 'show parts' is selected.
/// 2. Allows export parts independent: 'Export parts as building elements' is checked in alternate UI dialog.
/// </remarks>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="partElement">The standalone part to export.</param>
/// <param name="geometryElement">The goemetry of the part.</param>
/// <param name="productWrapper">The ProductWrapper object.</param>
public static void ExportPartAsBuildingElement(ExporterIFC exporterIFC, Element partElement, GeometryElement geometryElement, ProductWrapper productWrapper)
{
Part part = partElement as Part;
if (!ExporterCacheManager.ExportOptionsCache.ExportParts || part == null || geometryElement == null)
{
return;
}
bool isWall = part.OriginalCategoryId == new ElementId(BuiltInCategory.OST_Walls);
bool isColumn = part.OriginalCategoryId == new ElementId(BuiltInCategory.OST_Columns);
bool isWallOrColumn = isWall || isColumn;
IFCExtrusionAxes ifcExtrusionAxes = GetDefaultExtrusionAxesForPart(part);
Element hostElement = null;
ElementId overrideLevelId = null;
// Find the host element of the part.
hostElement = FindRootParent(part, part.OriginalCategoryId);
// If part's level is not associated, try to get the host's level with the same category.
if (part.LevelId != null && part.LevelId != ElementId.InvalidElementId)
{
overrideLevelId = part.LevelId;
}
else if (hostElement != null)
{
overrideLevelId = hostElement.LevelId;
}
// Split parts with original category is wall or column and the option wall or column is split by level is checked, and then export;
// otherwise, export separate parts normally.
if (isWallOrColumn && ExporterCacheManager.ExportOptionsCache.WallAndColumnSplitting)
{
IList <ElementId> levels = new List <ElementId>();
IList <IFCRange> ranges = new List <IFCRange>();
IFCEntityType exportType = isWall ? IFCEntityType.IfcWall : IFCEntityType.IfcColumn;
IFCExportInfoPair exportInfo = new IFCExportInfoPair();
exportInfo.SetValueWithPair(exportType);
LevelUtil.CreateSplitLevelRangesForElement(exporterIFC, exportInfo, part, out levels, out ranges);
if (ranges.Count == 0)
{
PartExporter.ExportPart(exporterIFC, partElement, productWrapper, null, null, null, ifcExtrusionAxes, hostElement,
overrideLevelId, true);
}
else
{
for (int ii = 0; ii < ranges.Count; ii++)
{
PartExporter.ExportPart(exporterIFC, partElement, productWrapper, null, null, ranges[ii], ifcExtrusionAxes,
hostElement, levels[ii], true);
}
}
}
else
{
PartExporter.ExportPart(exporterIFC, partElement, productWrapper, null, null, null, ifcExtrusionAxes, hostElement,
overrideLevelId, true);
}
}
/// <summary>
/// Export all the parts of the host element.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="hostElement">The host element having parts to export.</param>
/// <param name="hostHandle">The host element handle.</param>
/// <param name="originalWrapper">The ProductWrapper object.</param>
public static void ExportHostPart(ExporterIFC exporterIFC, Element hostElement, IFCAnyHandle hostHandle,
ProductWrapper originalWrapper, PlacementSetter placementSetter, IFCAnyHandle originalPlacement, ElementId overrideLevelId)
{
using (ProductWrapper subWrapper = ProductWrapper.Create(exporterIFC, true))
{
List <ElementId> associatedPartsList = PartUtils.GetAssociatedParts(hostElement.Document, hostElement.Id, false, true).ToList();
if (associatedPartsList.Count == 0)
{
return;
}
bool isWallOrColumn = IsHostWallOrColumn(exporterIFC, hostElement);
bool hasOverrideLevel = overrideLevelId != null && overrideLevelId != ElementId.InvalidElementId;
IFCExtrusionAxes ifcExtrusionAxes = GetDefaultExtrusionAxesForHost(exporterIFC, hostElement);
// Split parts if wall or column is split by level, and then export; otherwise, export parts normally.
if (isWallOrColumn && hasOverrideLevel && ExporterCacheManager.ExportOptionsCache.WallAndColumnSplitting)
{
if (!ExporterCacheManager.HostPartsCache.HasRegistered(hostElement.Id))
{
SplitParts(exporterIFC, hostElement, associatedPartsList); // Split parts and associate them with host.
}
// Find and export the parts that are split by specific level.
List <KeyValuePair <Part, IFCRange> > splitPartRangeList = new List <KeyValuePair <Part, IFCRange> >();
splitPartRangeList = ExporterCacheManager.HostPartsCache.Find(hostElement.Id, overrideLevelId);
if (splitPartRangeList != null)
{
foreach (KeyValuePair <Part, IFCRange> partRange in splitPartRangeList)
{
PartExporter.ExportPart(exporterIFC, partRange.Key, subWrapper, placementSetter, originalPlacement,
partRange.Value, ifcExtrusionAxes, hostElement, overrideLevelId, false);
}
}
}
else
{
foreach (ElementId partId in associatedPartsList)
{
Part part = hostElement.Document.GetElement(partId) as Part;
PartExporter.ExportPart(exporterIFC, part, subWrapper, placementSetter, originalPlacement, null, ifcExtrusionAxes,
hostElement, overrideLevelId, false);
}
}
// Create the relationship of Host and Parts.
ICollection <IFCAnyHandle> relatedElementIds = subWrapper.GetAllObjects();
if (relatedElementIds.Count > 0)
{
string guid = GUIDUtil.CreateGUID();
HashSet <IFCAnyHandle> relatedElementIdSet = new HashSet <IFCAnyHandle>(relatedElementIds);
IFCInstanceExporter.CreateRelAggregates(exporterIFC.GetFile(), guid, ExporterCacheManager.OwnerHistoryHandle, null, null, hostHandle, relatedElementIdSet);
}
}
}
/// <summary>
/// Export the standalone parts:
/// - The parts made from originals in Links
/// - The Orphan parts: the linked file where the original host element comes from is unloaded.
/// - The Zombie parts: the original host element is deleted from the linked file.
/// </summary>
/// <remarks>
/// This is a temporary workaround to export the parts made from linked elements. It should be refined when linked are supported (LinkedInstance at least.)
/// There are some limitations:
/// The linked element will not export as host, including the relative elements: e.g. windows, doors, openings.
/// The host part cannot export if visibility is set by linked view and has 'Show Original'.
/// The standalone part will skip export if Base Level is set 'Non Associated'.
/// The linked part export cannot be split even if its category is wall or column and 'Split wall or column by story' is checked.
/// </remarks>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="partElement">The standalone part to export.</param>
/// <param name="geometryElement">The goemetry of the part.</param>
/// <param name="productWrapper">The ProductWrapper object.</param>
public static void ExportStandalonePart(ExporterIFC exporterIFC, Element partElement, GeometryElement geometryElement, ProductWrapper productWrapper)
{
Part part = partElement as Part;
if (!ExporterCacheManager.ExportOptionsCache.ExportParts || part == null || geometryElement == null)
{
return;
}
if (IsAnyHostElementLocal(part))
{
// Has host element, so should export with host element.
return;
}
ElementId overrideLevelId = null;
if (part.LevelId == ElementId.InvalidElementId)
{
// If part's level is not associated, try to get the host's level with the same category.
Element hostElement = FindRootParent(part, part.OriginalCategoryId);
if (hostElement == null)
{
return;
}
overrideLevelId = hostElement.LevelId;
if (overrideLevelId == ElementId.InvalidElementId)
{
return;
}
}
IFCExtrusionAxes ifcExtrusionAxes = GetDefaultExtrusionAxesForPart(part);
PartExporter.ExportPart(exporterIFC, partElement, productWrapper, null, null, null, ifcExtrusionAxes, null,
overrideLevelId, false);
}
/// <summary>
/// Export the individual part (IfcBuildingElementPart).
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="partElement">The part element to export.</param>
/// <param name="geometryElement">The geometry of part.</param>
/// <param name="productWrapper">The ProductWrapper object.</param>
public static void ExportPart(ExporterIFC exporterIFC, Element partElement, ProductWrapper productWrapper,
PlacementSetter placementSetter, IFCAnyHandle originalPlacement, IFCRange range, IFCExtrusionAxes ifcExtrusionAxes,
Element hostElement, ElementId overrideLevelId, bool asBuildingElement)
{
if (!ElementFilteringUtil.IsElementVisible(partElement))
{
return;
}
Part part = partElement as Part;
if (part == null)
{
return;
}
if (!asBuildingElement)
{
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum;
if (Enum.TryParse <Common.Enums.IFCEntityType>("IfcBuildingElementPart", out elementClassTypeEnum))
{
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
}
}
else
{
string ifcEnumType = null;
IFCExportType exportType = ExporterUtil.GetExportType(exporterIFC, hostElement, out ifcEnumType);
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum;
if (Enum.TryParse <Common.Enums.IFCEntityType>(exportType.ToString(), out elementClassTypeEnum))
{
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
}
}
PlacementSetter standalonePlacementSetter = null;
bool standaloneExport = hostElement == null && !asBuildingElement;
ElementId partExportLevel = null;
if (standaloneExport || asBuildingElement)
{
partExportLevel = partElement.LevelId;
}
else
{
if (part.OriginalCategoryId != hostElement.Category.Id)
{
return;
}
partExportLevel = hostElement.LevelId;
}
if (overrideLevelId != null)
{
partExportLevel = overrideLevelId;
}
if (ExporterCacheManager.PartExportedCache.HasExported(partElement.Id, partExportLevel))
{
return;
}
Options options = GeometryUtil.GetIFCExportGeometryOptions();
View ownerView = partElement.Document.GetElement(partElement.OwnerViewId) as View;
if (ownerView != null)
{
options.View = ownerView;
}
GeometryElement geometryElement = partElement.get_Geometry(options);
if (geometryElement == null)
{
return;
}
try
{
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction transaction = new IFCTransaction(file))
{
IFCAnyHandle partPlacement = null;
if (standaloneExport || asBuildingElement)
{
Transform orientationTrf = Transform.Identity;
standalonePlacementSetter = PlacementSetter.Create(exporterIFC, partElement, null, orientationTrf, partExportLevel);
partPlacement = standalonePlacementSetter.LocalPlacement;
}
else
{
partPlacement = ExporterUtil.CreateLocalPlacement(file, originalPlacement, null);
}
bool validRange = (range != null && !MathUtil.IsAlmostZero(range.Start - range.End));
SolidMeshGeometryInfo solidMeshInfo;
if (validRange)
{
solidMeshInfo = GeometryUtil.GetSplitClippedSolidMeshGeometry(geometryElement, range);
if (solidMeshInfo.GetSolids().Count == 0 && solidMeshInfo.GetMeshes().Count == 0)
{
return;
}
}
else
{
solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geometryElement);
}
using (IFCExtrusionCreationData extrusionCreationData = new IFCExtrusionCreationData())
{
extrusionCreationData.SetLocalPlacement(partPlacement);
extrusionCreationData.ReuseLocalPlacement = false;
extrusionCreationData.PossibleExtrusionAxes = ifcExtrusionAxes;
IList <Solid> solids = solidMeshInfo.GetSolids();
IList <Mesh> meshes = solidMeshInfo.GetMeshes();
ElementId catId = CategoryUtil.GetSafeCategoryId(partElement);
ElementId hostCatId = CategoryUtil.GetSafeCategoryId(hostElement);
BodyData bodyData = null;
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
if (solids.Count > 0 || meshes.Count > 0)
{
bodyData = BodyExporter.ExportBody(exporterIFC, partElement, catId, ElementId.InvalidElementId, solids, meshes,
bodyExporterOptions, extrusionCreationData);
}
else
{
IList <GeometryObject> geomlist = new List <GeometryObject>();
geomlist.Add(geometryElement);
bodyData = BodyExporter.ExportBody(exporterIFC, partElement, catId, ElementId.InvalidElementId, geomlist,
bodyExporterOptions, extrusionCreationData);
}
IFCAnyHandle bodyRep = bodyData.RepresentationHnd;
if (IFCAnyHandleUtil.IsNullOrHasNoValue(bodyRep))
{
extrusionCreationData.ClearOpenings();
return;
}
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
representations.Add(bodyRep);
IFCAnyHandle boundingBoxRep = BoundingBoxExporter.ExportBoundingBox(exporterIFC, geometryElement, Transform.Identity);
if (boundingBoxRep != null)
{
representations.Add(boundingBoxRep);
}
IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
string partGUID = GUIDUtil.CreateGUID(partElement);
string partName = NamingUtil.GetNameOverride(partElement, NamingUtil.GetIFCName(partElement));
string partDescription = NamingUtil.GetDescriptionOverride(partElement, null);
string partObjectType = NamingUtil.GetObjectTypeOverride(partElement, NamingUtil.CreateIFCObjectName(exporterIFC, partElement));
string partTag = NamingUtil.GetTagOverride(partElement, NamingUtil.CreateIFCElementId(partElement));
IFCAnyHandle ifcPart = null;
if (!asBuildingElement)
{
ifcPart = IFCInstanceExporter.CreateBuildingElementPart(file, partGUID, ownerHistory, partName, partDescription,
partObjectType, extrusionCreationData.GetLocalPlacement(), prodRep, partTag);
}
else
{
string ifcEnumType = null;
IFCExportType exportType = ExporterUtil.GetExportType(exporterIFC, hostElement, out ifcEnumType);
string defaultValue = null;
// This replicates old functionality before IFC4 addition, where the default for slab was "FLOOR".
// Really the export layer table should be fixed for this case.
if (string.IsNullOrWhiteSpace(ifcEnumType) && hostCatId == new ElementId(BuiltInCategory.OST_Floors))
{
ifcEnumType = "FLOOR";
}
ifcEnumType = IFCValidateEntry.GetValidIFCType(hostElement, ifcEnumType, defaultValue);
switch (exportType)
{
case IFCExportType.IfcColumnType:
ifcPart = IFCInstanceExporter.CreateColumn(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType);
break;
case IFCExportType.IfcCovering:
ifcPart = IFCInstanceExporter.CreateCovering(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType);
break;
case IFCExportType.IfcFooting:
ifcPart = IFCInstanceExporter.CreateFooting(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType);
break;
case IFCExportType.IfcPile:
ifcPart = IFCInstanceExporter.CreatePile(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType, null);
break;
case IFCExportType.IfcRoof:
ifcPart = IFCInstanceExporter.CreateRoof(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType);
break;
case IFCExportType.IfcSlab:
ifcPart = IFCInstanceExporter.CreateSlab(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType);
break;
case IFCExportType.IfcWall:
ifcPart = IFCInstanceExporter.CreateWall(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType);
break;
default:
ifcPart = IFCInstanceExporter.CreateBuildingElementProxy(file, partGUID, ownerHistory, partName, partDescription,
partObjectType, extrusionCreationData.GetLocalPlacement(), prodRep, partTag, null);
break;
}
}
bool containedInLevel = (standaloneExport || asBuildingElement);
PlacementSetter whichPlacementSetter = containedInLevel ? standalonePlacementSetter : placementSetter;
productWrapper.AddElement(partElement, ifcPart, whichPlacementSetter, extrusionCreationData, containedInLevel);
OpeningUtil.CreateOpeningsIfNecessary(ifcPart, partElement, extrusionCreationData, bodyData.OffsetTransform, exporterIFC,
extrusionCreationData.GetLocalPlacement(), whichPlacementSetter, productWrapper);
//Add the exported part to exported cache.
TraceExportedParts(partElement, partExportLevel, standaloneExport || asBuildingElement ? ElementId.InvalidElementId : hostElement.Id);
CategoryUtil.CreateMaterialAssociation(exporterIFC, ifcPart, bodyData.MaterialIds);
transaction.Commit();
}
}
}
finally
{
if (standalonePlacementSetter != null)
{
standalonePlacementSetter.Dispose();
}
}
}
/// <summary>
/// Export the individual part (IfcBuildingElementPart).
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="partElement">The part element to export.</param>
/// <param name="geometryElement">The geometry of part.</param>
/// <param name="productWrapper">The ProductWrapper object.</param>
/// <param name="placementSetter"></param>
/// <param name="originalPlacement"></param>
/// <param name="range"></param>
/// <param name="ifcExtrusionAxes"></param>
/// <param name="hostElement">The host of the part. This can be null.</param>
/// <param name="overrideLevelId">The id of the level that the part is one, overridding other sources.</param>
/// <param name="asBuildingElement">If true, export the Part as a building element instead of an IfcElementPart.</param>
public static void ExportPart(ExporterIFC exporterIFC, Element partElement, ProductWrapper productWrapper,
PlacementSetter placementSetter, IFCAnyHandle originalPlacement, IFCRange range, IFCExtrusionAxes ifcExtrusionAxes,
Element hostElement, ElementId overrideLevelId, bool asBuildingElement)
{
if (!ElementFilteringUtil.IsElementVisible(partElement))
{
return;
}
Part part = partElement as Part;
if (part == null)
{
return;
}
// We don't know how to export a part as a building element if we don't know it's host.
if (asBuildingElement && (hostElement == null))
{
return;
}
if (!asBuildingElement)
{
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum = Common.Enums.IFCEntityType.IfcBuildingElementPart;
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
}
else
{
string ifcEnumType = null;
IFCExportInfoPair exportType = ExporterUtil.GetExportType(exporterIFC, hostElement, out ifcEnumType);
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum;
if (Enum.TryParse <Common.Enums.IFCEntityType>(exportType.ToString(), out elementClassTypeEnum))
{
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
}
}
PlacementSetter standalonePlacementSetter = null;
bool standaloneExport = hostElement == null || asBuildingElement;
ElementId partExportLevelId = (overrideLevelId != null) ? overrideLevelId : null;
if (partExportLevelId == null && standaloneExport)
{
partExportLevelId = partElement.LevelId;
}
if (partExportLevelId == null)
{
if (hostElement == null || (part.OriginalCategoryId != hostElement.Category.Id))
{
return;
}
partExportLevelId = hostElement.LevelId;
}
if (ExporterCacheManager.PartExportedCache.HasExported(partElement.Id, partExportLevelId))
{
return;
}
Options options = GeometryUtil.GetIFCExportGeometryOptions();
View ownerView = partElement.Document.GetElement(partElement.OwnerViewId) as View;
if (ownerView != null)
{
options.View = ownerView;
}
GeometryElement geometryElement = partElement.get_Geometry(options);
if (geometryElement == null)
{
return;
}
try
{
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction transaction = new IFCTransaction(file))
{
IFCAnyHandle partPlacement = null;
if (standaloneExport)
{
Transform orientationTrf = Transform.Identity;
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, partElement, out overrideContainerHnd);
if (overrideContainerId != ElementId.InvalidElementId && (partExportLevelId == null || partExportLevelId == ElementId.InvalidElementId))
{
partExportLevelId = overrideContainerId;
}
standalonePlacementSetter = PlacementSetter.Create(exporterIFC, partElement, null, orientationTrf, partExportLevelId, overrideContainerHnd);
partPlacement = standalonePlacementSetter.LocalPlacement;
}
else
{
//partPlacement = ExporterUtil.CreateLocalPlacement(file, null, null);
partPlacement = ExporterUtil.CreateLocalPlacement(file, originalPlacement, null);
}
bool validRange = (range != null && !MathUtil.IsAlmostZero(range.Start - range.End));
SolidMeshGeometryInfo solidMeshInfo;
if (validRange)
{
solidMeshInfo = GeometryUtil.GetSplitClippedSolidMeshGeometry(geometryElement, range);
if (solidMeshInfo.GetSolids().Count == 0 && solidMeshInfo.GetMeshes().Count == 0)
{
return;
}
}
else
{
solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geometryElement);
}
using (IFCExtrusionCreationData extrusionCreationData = new IFCExtrusionCreationData())
{
extrusionCreationData.SetLocalPlacement(partPlacement);
extrusionCreationData.ReuseLocalPlacement = false;
extrusionCreationData.PossibleExtrusionAxes = ifcExtrusionAxes;
IList <Solid> solids = new List <Solid>();;
IList <Mesh> meshes = new List <Mesh>();
IList <GeometryObject> gObjs = FamilyExporterUtil.RemoveInvisibleSolidsAndMeshes(partElement.Document, exporterIFC, solidMeshInfo.GetSolids(), solidMeshInfo.GetMeshes());
foreach (GeometryObject gObj in gObjs)
{
if (gObj is Solid)
{
solids.Add(gObj as Solid);
}
else if (gObj is Mesh)
{
meshes.Add(gObj as Mesh);
}
}
ElementId catId = CategoryUtil.GetSafeCategoryId(partElement);
ElementId hostCatId = CategoryUtil.GetSafeCategoryId(hostElement);
BodyData bodyData = null;
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
if (solids.Count > 0 || meshes.Count > 0)
{
bodyData = BodyExporter.ExportBody(exporterIFC, partElement, catId, ElementId.InvalidElementId, solids, meshes,
bodyExporterOptions, extrusionCreationData);
}
else
{
IList <GeometryObject> geomlist = new List <GeometryObject>();
geomlist.Add(geometryElement);
bodyData = BodyExporter.ExportBody(exporterIFC, partElement, catId, ElementId.InvalidElementId, geomlist,
bodyExporterOptions, extrusionCreationData);
}
IFCAnyHandle bodyRep = bodyData.RepresentationHnd;
if (IFCAnyHandleUtil.IsNullOrHasNoValue(bodyRep))
{
extrusionCreationData.ClearOpenings();
return;
}
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
representations.Add(bodyRep);
IFCAnyHandle boundingBoxRep = BoundingBoxExporter.ExportBoundingBox(exporterIFC, geometryElement, Transform.Identity);
if (boundingBoxRep != null)
{
representations.Add(boundingBoxRep);
}
IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
string partGUID = GUIDUtil.CreateGUID(partElement);
string ifcEnumType = null;
IFCExportInfoPair exportType = ExporterUtil.GetExportType(exporterIFC, hostElement, out ifcEnumType);
IFCAnyHandle ifcPart = null;
if (!asBuildingElement)
{
ifcPart = IFCInstanceExporter.CreateBuildingElementPart(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep);
}
else
{
switch (exportType.ExportInstance)
{
case IFCEntityType.IfcColumn:
ifcPart = IFCInstanceExporter.CreateColumn(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep, ifcEnumType);
break;
case IFCEntityType.IfcCovering:
ifcPart = IFCInstanceExporter.CreateCovering(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep, ifcEnumType);
break;
case IFCEntityType.IfcFooting:
ifcPart = IFCInstanceExporter.CreateFooting(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep, ifcEnumType);
break;
case IFCEntityType.IfcPile:
ifcPart = IFCInstanceExporter.CreatePile(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep, ifcEnumType, null);
break;
case IFCEntityType.IfcRoof:
ifcPart = IFCInstanceExporter.CreateRoof(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep, ifcEnumType);
break;
case IFCEntityType.IfcSlab:
{
// TODO: fix this elsewhere.
if (ExporterUtil.IsNotDefined(ifcEnumType))
{
if (hostCatId == new ElementId(BuiltInCategory.OST_Floors))
{
ifcEnumType = "FLOOR";
}
else if (hostCatId == new ElementId(BuiltInCategory.OST_Roofs))
{
ifcEnumType = "ROOF";
}
}
ifcPart = IFCInstanceExporter.CreateSlab(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep, ifcEnumType);
}
break;
case IFCEntityType.IfcWall:
ifcPart = IFCInstanceExporter.CreateWall(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep, ifcEnumType);
break;
default:
ifcPart = IFCInstanceExporter.CreateBuildingElementProxy(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep, exportType.ValidatedPredefinedType);
break;
}
}
bool containedInLevel = standaloneExport;
PlacementSetter whichPlacementSetter = containedInLevel ? standalonePlacementSetter : placementSetter;
productWrapper.AddElement(partElement, ifcPart, whichPlacementSetter, extrusionCreationData, containedInLevel, exportType);
OpeningUtil.CreateOpeningsIfNecessary(ifcPart, partElement, extrusionCreationData, bodyData.OffsetTransform, exporterIFC,
extrusionCreationData.GetLocalPlacement(), whichPlacementSetter, productWrapper);
//Add the exported part to exported cache.
TraceExportedParts(partElement, partExportLevelId, standaloneExport ? ElementId.InvalidElementId : hostElement.Id);
CategoryUtil.CreateMaterialAssociation(exporterIFC, ifcPart, bodyData.MaterialIds);
transaction.Commit();
}
}
}
finally
{
if (standalonePlacementSetter != null)
{
standalonePlacementSetter.Dispose();
}
}
}
/// <summary>
/// Export the individual part (IfcBuildingElementPart).
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="partElement">The part element to export.</param>
/// <param name="geometryElement">The geometry of part.</param>
/// <param name="productWrapper">The IFCProductWrapper object.</param>
public static void ExportPart(ExporterIFC exporterIFC, Element partElement, IFCProductWrapper productWrapper,
IFCPlacementSetter placementSetter, IFCAnyHandle originalPlacement, IFCRange range, IFCExtrusionAxes ifcExtrusionAxes,
Element hostElement, ElementId overrideLevelId, bool asBuildingElement)
{
if (!ElementFilteringUtil.IsElementVisible(ExporterCacheManager.ExportOptionsCache.FilterViewForExport, partElement))
return;
Part part = partElement as Part;
if (part == null)
return;
IFCPlacementSetter standalonePlacementSetter = null;
bool standaloneExport = hostElement == null && !asBuildingElement;
ElementId partExportLevel = null;
if (standaloneExport || asBuildingElement)
{
if (partElement.Level != null)
partExportLevel = partElement.Level.Id;
}
else
{
if (part.OriginalCategoryId != hostElement.Category.Id)
return;
partExportLevel = hostElement.Level.Id;
}
if (overrideLevelId != null)
partExportLevel = overrideLevelId;
if (ExporterCacheManager.PartExportedCache.HasExported(partElement.Id, partExportLevel))
return;
Options options = GeometryUtil.GetIFCExportGeometryOptions();
View ownerView = partElement.Document.GetElement(partElement.OwnerViewId) as View;
if (ownerView != null)
options.View = ownerView;
GeometryElement geometryElement = partElement.get_Geometry(options);
if (geometryElement == null)
return;
try
{
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction transaction = new IFCTransaction(file))
{
IFCAnyHandle partPlacement = null;
if (standaloneExport || asBuildingElement)
{
Transform orientationTrf = Transform.Identity;
standalonePlacementSetter = IFCPlacementSetter.Create(exporterIFC, partElement, null, orientationTrf, partExportLevel);
partPlacement = standalonePlacementSetter.GetPlacement();
}
else
partPlacement = ExporterUtil.CopyLocalPlacement(file, originalPlacement);
bool validRange = (range != null && !MathUtil.IsAlmostZero(range.Start - range.End));
SolidMeshGeometryInfo solidMeshInfo;
if (validRange)
{
solidMeshInfo = GeometryUtil.GetClippedSolidMeshGeometry(geometryElement, range);
if (solidMeshInfo.GetSolids().Count == 0 && solidMeshInfo.GetMeshes().Count == 0)
return;
}
else
{
solidMeshInfo = GeometryUtil.GetSolidMeshGeometry(geometryElement, Transform.Identity);
}
using (IFCExtrusionCreationData extrusionCreationData = new IFCExtrusionCreationData())
{
extrusionCreationData.SetLocalPlacement(partPlacement);
extrusionCreationData.ReuseLocalPlacement = false;
extrusionCreationData.PossibleExtrusionAxes = ifcExtrusionAxes;
IList<Solid> solids = solidMeshInfo.GetSolids();
IList<Mesh> meshes = solidMeshInfo.GetMeshes();
ElementId catId = CategoryUtil.GetSafeCategoryId(partElement);
BodyData bodyData = null;
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true);
if (solids.Count > 0 || meshes.Count > 0)
{
bodyData = BodyExporter.ExportBody(partElement.Document.Application, exporterIFC, partElement, catId, solids, meshes,
bodyExporterOptions, extrusionCreationData);
}
else
{
IList<GeometryObject> geomlist = new List<GeometryObject>();
geomlist.Add(geometryElement);
bodyData = BodyExporter.ExportBody(partElement.Document.Application, exporterIFC, partElement, catId, geomlist,
bodyExporterOptions, extrusionCreationData);
}
IFCAnyHandle bodyRep = bodyData.RepresentationHnd;
if (IFCAnyHandleUtil.IsNullOrHasNoValue(bodyRep))
{
extrusionCreationData.ClearOpenings();
return;
}
IList<IFCAnyHandle> representations = new List<IFCAnyHandle>();
representations.Add(bodyRep);
IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
IFCAnyHandle ownerHistory = exporterIFC.GetOwnerHistoryHandle();
string partGUID = ExporterIFCUtils.CreateGUID(partElement);
string origPartName = NamingUtil.CreateIFCName(exporterIFC, -1);
string partName = NamingUtil.GetNameOverride(partElement, origPartName);
string partDescription = NamingUtil.GetDescriptionOverride(partElement, null);
string partObjectType = NamingUtil.GetObjectTypeOverride(partElement, NamingUtil.CreateIFCObjectName(exporterIFC, partElement));
string partElemId = NamingUtil.CreateIFCElementId(partElement);
IFCAnyHandle ifcPart = null;
if (!asBuildingElement)
{
ifcPart = IFCInstanceExporter.CreateBuildingElementPart(file, partGUID, ownerHistory, partName, partDescription,
partObjectType, extrusionCreationData.GetLocalPlacement(), prodRep, partElemId);
}
else
{
string ifcEnumType;
IFCExportType exportType = ExporterUtil.GetExportType(exporterIFC, hostElement, out ifcEnumType);
switch (exportType)
{
case IFCExportType.ExportColumnType:
ifcPart = IFCInstanceExporter.CreateColumn(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partElemId);
break;
case IFCExportType.ExportCovering:
IFCCoveringType coveringType = CeilingExporter.GetIFCCoveringType(hostElement, ifcEnumType);
ifcPart = IFCInstanceExporter.CreateCovering(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partElemId, coveringType);
break;
case IFCExportType.ExportFooting:
IFCFootingType footingType = FootingExporter.GetIFCFootingType(hostElement, ifcEnumType);
ifcPart = IFCInstanceExporter.CreateFooting(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partElemId, footingType);
break;
case IFCExportType.ExportRoof:
IFCRoofType roofType = RoofExporter.GetIFCRoofType(ifcEnumType);
ifcPart = IFCInstanceExporter.CreateRoof(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partElemId, roofType);
break;
case IFCExportType.ExportSlab:
IFCSlabType slabType = FloorExporter.GetIFCSlabType(ifcEnumType);
ifcPart = IFCInstanceExporter.CreateSlab(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partElemId, slabType);
break;
case IFCExportType.ExportWall:
ifcPart = IFCInstanceExporter.CreateWallStandardCase(file, partGUID, ownerHistory, partName, partDescription,
partObjectType, extrusionCreationData.GetLocalPlacement(), prodRep, partElemId);
break;
default:
ifcPart = IFCInstanceExporter.CreateBuildingElementProxy(file, partGUID, ownerHistory, partName, partDescription,
partObjectType, extrusionCreationData.GetLocalPlacement(), prodRep, partElemId, IFCElementComposition.Element);
break;
}
}
productWrapper.AddElement(ifcPart, standaloneExport || asBuildingElement ? standalonePlacementSetter : placementSetter, extrusionCreationData, standaloneExport || asBuildingElement);
//Add the exported part to exported cache.
TraceExportedParts(partElement, partExportLevel, standaloneExport || asBuildingElement ? ElementId.InvalidElementId : hostElement.Id);
CategoryUtil.CreateMaterialAssociations(partElement.Document, exporterIFC, ifcPart, bodyData.MaterialIds);
transaction.Commit();
}
}
}
finally
{
if (standalonePlacementSetter != null)
standalonePlacementSetter.Dispose();
}
}
/// <summary>
/// Export the individual part (IfcBuildingElementPart).
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="partElement">The part element to export.</param>
/// <param name="geometryElement">The geometry of part.</param>
/// <param name="productWrapper">The ProductWrapper object.</param>
public static void ExportPart(ExporterIFC exporterIFC, Element partElement, ProductWrapper productWrapper,
PlacementSetter placementSetter, IFCAnyHandle originalPlacement, IFCRange range, IFCExtrusionAxes ifcExtrusionAxes,
Element hostElement, ElementId overrideLevelId, bool asBuildingElement)
{
if (!ElementFilteringUtil.IsElementVisible(partElement))
return;
Part part = partElement as Part;
if (part == null)
return;
PlacementSetter standalonePlacementSetter = null;
bool standaloneExport = hostElement == null && !asBuildingElement;
ElementId partExportLevel = null;
if (standaloneExport || asBuildingElement)
{
partExportLevel = partElement.LevelId;
}
else
{
if (part.OriginalCategoryId != hostElement.Category.Id)
return;
partExportLevel = hostElement.LevelId;
}
if (overrideLevelId != null)
partExportLevel = overrideLevelId;
if (ExporterCacheManager.PartExportedCache.HasExported(partElement.Id, partExportLevel))
return;
Options options = GeometryUtil.GetIFCExportGeometryOptions();
View ownerView = partElement.Document.GetElement(partElement.OwnerViewId) as View;
if (ownerView != null)
options.View = ownerView;
GeometryElement geometryElement = partElement.get_Geometry(options);
if (geometryElement == null)
return;
try
{
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction transaction = new IFCTransaction(file))
{
IFCAnyHandle partPlacement = null;
if (standaloneExport || asBuildingElement)
{
Transform orientationTrf = Transform.Identity;
standalonePlacementSetter = PlacementSetter.Create(exporterIFC, partElement, null, orientationTrf, partExportLevel);
partPlacement = standalonePlacementSetter.LocalPlacement;
}
else
{
partPlacement = ExporterUtil.CreateLocalPlacement(file, originalPlacement, null);
}
bool validRange = (range != null && !MathUtil.IsAlmostZero(range.Start - range.End));
SolidMeshGeometryInfo solidMeshInfo;
if (validRange)
{
solidMeshInfo = GeometryUtil.GetSplitClippedSolidMeshGeometry(geometryElement, range);
if (solidMeshInfo.GetSolids().Count == 0 && solidMeshInfo.GetMeshes().Count == 0)
return;
}
else
{
solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geometryElement);
}
using (IFCExtrusionCreationData extrusionCreationData = new IFCExtrusionCreationData())
{
extrusionCreationData.SetLocalPlacement(partPlacement);
extrusionCreationData.ReuseLocalPlacement = false;
extrusionCreationData.PossibleExtrusionAxes = ifcExtrusionAxes;
IList<Solid> solids = solidMeshInfo.GetSolids();
IList<Mesh> meshes = solidMeshInfo.GetMeshes();
ElementId catId = CategoryUtil.GetSafeCategoryId(partElement);
ElementId hostCatId = CategoryUtil.GetSafeCategoryId(hostElement);
BodyData bodyData = null;
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true);
if (solids.Count > 0 || meshes.Count > 0)
{
bodyData = BodyExporter.ExportBody(exporterIFC, partElement, catId, ElementId.InvalidElementId, solids, meshes,
bodyExporterOptions, extrusionCreationData);
}
else
{
IList<GeometryObject> geomlist = new List<GeometryObject>();
geomlist.Add(geometryElement);
bodyData = BodyExporter.ExportBody(exporterIFC, partElement, catId, ElementId.InvalidElementId, geomlist,
bodyExporterOptions, extrusionCreationData);
}
IFCAnyHandle bodyRep = bodyData.RepresentationHnd;
if (IFCAnyHandleUtil.IsNullOrHasNoValue(bodyRep))
{
extrusionCreationData.ClearOpenings();
return;
}
IList<IFCAnyHandle> representations = new List<IFCAnyHandle>();
representations.Add(bodyRep);
IFCAnyHandle boundingBoxRep = BoundingBoxExporter.ExportBoundingBox(exporterIFC, geometryElement, Transform.Identity);
if (boundingBoxRep != null)
representations.Add(boundingBoxRep);
IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
IFCAnyHandle ownerHistory = exporterIFC.GetOwnerHistoryHandle();
string partGUID = GUIDUtil.CreateGUID(partElement);
string partName = NamingUtil.GetNameOverride(partElement, NamingUtil.GetIFCName(partElement));
string partDescription = NamingUtil.GetDescriptionOverride(partElement, null);
string partObjectType = NamingUtil.GetObjectTypeOverride(partElement, NamingUtil.CreateIFCObjectName(exporterIFC, partElement));
string partTag = NamingUtil.GetTagOverride(partElement, NamingUtil.CreateIFCElementId(partElement));
IFCAnyHandle ifcPart = null;
if (!asBuildingElement)
{
ifcPart = IFCInstanceExporter.CreateBuildingElementPart(file, partGUID, ownerHistory, partName, partDescription,
partObjectType, extrusionCreationData.GetLocalPlacement(), prodRep, partTag);
}
else
{
string ifcEnumType = null;
IFCExportType exportType = ExporterUtil.GetExportType(exporterIFC, hostElement, out ifcEnumType);
string defaultValue = null;
// This replicates old functionality before IFC4 addition, where the default for slab was "FLOOR".
// Really the export layer table should be fixed for this case.
if (string.IsNullOrWhiteSpace(ifcEnumType) && hostCatId == new ElementId(BuiltInCategory.OST_Floors))
ifcEnumType = "FLOOR";
ifcEnumType = IFCValidateEntry.GetValidIFCType(hostElement, ifcEnumType, defaultValue);
switch (exportType)
{
case IFCExportType.IfcColumnType:
ifcPart = IFCInstanceExporter.CreateColumn(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType);
break;
case IFCExportType.IfcCovering:
ifcPart = IFCInstanceExporter.CreateCovering(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType);
break;
case IFCExportType.IfcFooting:
ifcPart = IFCInstanceExporter.CreateFooting(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType);
break;
case IFCExportType.IfcPile:
ifcPart = IFCInstanceExporter.CreatePile(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType, null);
break;
case IFCExportType.IfcRoof:
ifcPart = IFCInstanceExporter.CreateRoof(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType);
break;
case IFCExportType.IfcSlab:
ifcPart = IFCInstanceExporter.CreateSlab(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType);
break;
case IFCExportType.IfcWall:
ifcPart = IFCInstanceExporter.CreateWall(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType);
break;
default:
ifcPart = IFCInstanceExporter.CreateBuildingElementProxy(file, partGUID, ownerHistory, partName, partDescription,
partObjectType, extrusionCreationData.GetLocalPlacement(), prodRep, partTag, null);
break;
}
}
bool containedInLevel = (standaloneExport || asBuildingElement);
PlacementSetter whichPlacementSetter = containedInLevel ? standalonePlacementSetter : placementSetter;
productWrapper.AddElement(partElement, ifcPart, whichPlacementSetter, extrusionCreationData, containedInLevel);
OpeningUtil.CreateOpeningsIfNecessary(ifcPart, partElement, extrusionCreationData, bodyData.OffsetTransform, exporterIFC,
extrusionCreationData.GetLocalPlacement(), whichPlacementSetter, productWrapper);
//Add the exported part to exported cache.
TraceExportedParts(partElement, partExportLevel, standaloneExport || asBuildingElement ? ElementId.InvalidElementId : hostElement.Id);
CategoryUtil.CreateMaterialAssociations(exporterIFC, ifcPart, bodyData.MaterialIds);
transaction.Commit();
}
}
}
finally
{
if (standalonePlacementSetter != null)
standalonePlacementSetter.Dispose();
}
}
/// <summary>
/// Export the individual part (IfcBuildingElementPart).
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="partElement">The part element to export.</param>
/// <param name="geometryElement">The geometry of part.</param>
/// <param name="productWrapper">The ProductWrapper object.</param>
public static void ExportPart(ExporterIFC exporterIFC, Element partElement, ProductWrapper productWrapper,
IFCPlacementSetter placementSetter, IFCAnyHandle originalPlacement, IFCRange range, IFCExtrusionAxes ifcExtrusionAxes,
Element hostElement, ElementId overrideLevelId, bool asBuildingElement)
{
if (!ElementFilteringUtil.IsElementVisible(partElement))
{
return;
}
Part part = partElement as Part;
if (part == null)
{
return;
}
IFCPlacementSetter standalonePlacementSetter = null;
bool standaloneExport = hostElement == null && !asBuildingElement;
ElementId partExportLevel = null;
if (overrideLevelId != null)
{
partExportLevel = overrideLevelId;
}
else if (standaloneExport || asBuildingElement)
{
if (partElement.Level != null)
{
partExportLevel = partElement.Level.Id;
}
}
else
{
if (part.OriginalCategoryId != hostElement.Category.Id)
{
return;
}
partExportLevel = hostElement.Level.Id;
}
if (ExporterCacheManager.PartExportedCache.HasExported(partElement.Id, partExportLevel))
{
return;
}
Options options = GeometryUtil.GetIFCExportGeometryOptions();
View ownerView = partElement.Document.GetElement(partElement.OwnerViewId) as View;
if (ownerView != null)
{
options.View = ownerView;
}
GeometryElement geometryElement = partElement.get_Geometry(options);
if (geometryElement == null)
{
return;
}
try
{
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction transaction = new IFCTransaction(file))
{
IFCAnyHandle partPlacement = null;
if (standaloneExport || asBuildingElement)
{
Transform orientationTrf = Transform.Identity;
standalonePlacementSetter = IFCPlacementSetter.Create(exporterIFC, partElement, null, orientationTrf, partExportLevel);
partPlacement = standalonePlacementSetter.GetPlacement();
}
else
{
partPlacement = ExporterUtil.CreateLocalPlacement(file, originalPlacement, null);
}
bool validRange = (range != null && !MathUtil.IsAlmostZero(range.Start - range.End));
SolidMeshGeometryInfo solidMeshInfo;
if (validRange)
{
solidMeshInfo = GeometryUtil.GetSplitClippedSolidMeshGeometry(geometryElement, range);
if (solidMeshInfo.GetSolids().Count == 0 && solidMeshInfo.GetMeshes().Count == 0)
{
return;
}
}
else
{
solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geometryElement);
}
using (IFCExtrusionCreationData extrusionCreationData = new IFCExtrusionCreationData())
{
extrusionCreationData.SetLocalPlacement(partPlacement);
extrusionCreationData.ReuseLocalPlacement = false;
extrusionCreationData.PossibleExtrusionAxes = ifcExtrusionAxes;
IList <Solid> solids = solidMeshInfo.GetSolids();
IList <Mesh> meshes = solidMeshInfo.GetMeshes();
ElementId catId = CategoryUtil.GetSafeCategoryId(partElement);
BodyData bodyData = null;
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true);
if (solids.Count > 0 || meshes.Count > 0)
{
bodyData = BodyExporter.ExportBody(exporterIFC, partElement, catId, ElementId.InvalidElementId, solids, meshes,
bodyExporterOptions, extrusionCreationData);
}
else
{
IList <GeometryObject> geomlist = new List <GeometryObject>();
geomlist.Add(geometryElement);
bodyData = BodyExporter.ExportBody(exporterIFC, partElement, catId, ElementId.InvalidElementId, geomlist,
bodyExporterOptions, extrusionCreationData);
}
IFCAnyHandle bodyRep = bodyData.RepresentationHnd;
if (IFCAnyHandleUtil.IsNullOrHasNoValue(bodyRep))
{
extrusionCreationData.ClearOpenings();
return;
}
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
representations.Add(bodyRep);
IFCAnyHandle boundingBoxRep = BoundingBoxExporter.ExportBoundingBox(exporterIFC, geometryElement, Transform.Identity);
if (boundingBoxRep != null)
{
representations.Add(boundingBoxRep);
}
IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
IFCAnyHandle ownerHistory = exporterIFC.GetOwnerHistoryHandle();
string partGUID = GUIDUtil.CreateGUID(partElement);
string partName = NamingUtil.GetNameOverride(partElement, NamingUtil.GetIFCName(partElement));
string partDescription = NamingUtil.GetDescriptionOverride(partElement, null);
string partObjectType = NamingUtil.GetObjectTypeOverride(partElement, NamingUtil.CreateIFCObjectName(exporterIFC, partElement));
string partTag = NamingUtil.GetTagOverride(partElement, NamingUtil.CreateIFCElementId(partElement));
IFCAnyHandle ifcPart = null;
if (!asBuildingElement)
{
ifcPart = IFCInstanceExporter.CreateBuildingElementPart(file, partGUID, ownerHistory, partName, partDescription,
partObjectType, extrusionCreationData.GetLocalPlacement(), prodRep, partTag);
}
else
{
string ifcEnumType;
IFCExportType exportType = ExporterUtil.GetExportType(exporterIFC, hostElement, out ifcEnumType);
switch (exportType)
{
case IFCExportType.ExportColumnType:
ifcPart = IFCInstanceExporter.CreateColumn(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag);
break;
case IFCExportType.ExportCovering:
IFCCoveringType coveringType = CeilingExporter.GetIFCCoveringType(hostElement, ifcEnumType);
ifcPart = IFCInstanceExporter.CreateCovering(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, coveringType);
break;
case IFCExportType.ExportFooting:
IFCFootingType footingType = FootingExporter.GetIFCFootingType(hostElement, ifcEnumType);
ifcPart = IFCInstanceExporter.CreateFooting(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, footingType);
break;
case IFCExportType.ExportRoof:
IFCRoofType roofType = RoofExporter.GetIFCRoofType(ifcEnumType);
ifcPart = IFCInstanceExporter.CreateRoof(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, roofType);
break;
case IFCExportType.ExportSlab:
IFCSlabType slabType = FloorExporter.GetIFCSlabType(ifcEnumType);
ifcPart = IFCInstanceExporter.CreateSlab(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, slabType);
break;
case IFCExportType.ExportWall:
ifcPart = IFCInstanceExporter.CreateWall(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag);
break;
default:
ifcPart = IFCInstanceExporter.CreateBuildingElementProxy(file, partGUID, ownerHistory, partName, partDescription,
partObjectType, extrusionCreationData.GetLocalPlacement(), prodRep, partTag, null);
break;
}
}
bool containedInLevel = (standaloneExport || asBuildingElement);
IFCPlacementSetter whichPlacementSetter = containedInLevel ? standalonePlacementSetter : placementSetter;
productWrapper.AddElement(partElement, ifcPart, whichPlacementSetter, extrusionCreationData, containedInLevel);
//Add the exported part to exported cache.
TraceExportedParts(partElement, partExportLevel, standaloneExport || asBuildingElement ? ElementId.InvalidElementId : hostElement.Id);
CategoryUtil.CreateMaterialAssociations(exporterIFC, ifcPart, bodyData.MaterialIds);
transaction.Commit();
}
}
}
finally
{
if (standalonePlacementSetter != null)
{
standalonePlacementSetter.Dispose();
}
}
}