Пример #1
0
        //20170209 add by liwei1 for P001-170203001 ===end===

        private void InsertMR(DateTime report_datetime, string category, string recommendedOperations, DependencyObjectCollection resultColl, object docId) //20170209 modi by liwei1 for P001-170124001 增加参数:docId
        {
            DataTable dt = QueryForMoReceiptReq(report_datetime, category, recommendedOperations, docId);                                                   //20170209 modi by liwei1 for P001-170124001 增加参数:docId

            ValidateParaFilDoc(dt);                                                                                                                         //20161213 add by shenbao for B001-161213006
            DataTable dt_d = QueryForMoReceipt_D(category, report_datetime, recommendedOperations);

            if (dt.Rows.Count > 0)
            {
                IQueryService    qrySrv      = GetService <IQueryService>();//20170405 add by wangrm for P001-170328001
                ICreateService   createSrv   = GetService <ICreateService>("MO_RECEIPT_REQUISTION");
                DependencyObject entity      = createSrv.Create() as DependencyObject;
                ISaveService     saveService = this.GetService <ISaveService>("MO_RECEIPT_REQUISTION");
                List <IGrouping <object, DataRow> > groupDt          = dt_d.AsEnumerable().GroupBy(a => (a.Field <object>("MO_RECEIPT_REQUISTION_ID"))).ToList();
                IEFNETStatusStatusService           efnetSrv         = this.GetService <IEFNETStatusStatusService>();
                IDocumentNumberGenerateService      docNumberService = this.GetService <IDocumentNumberGenerateService>("MO_RECEIPT_REQUISTION");
                foreach (DataRow dr in dt.Rows)
                {
                    DependencyObject           newEntity      = new DependencyObject(entity.DependencyObjectType);
                    DependencyObjectCollection newEntityDColl = newEntity["MO_RECEIPT_REQUISTION_D"] as DependencyObjectCollection;
                    AddToEntity(newEntity, dr, dt.Columns, false);
                    newEntity["DOC_NO"] = docNumberService.NextNumber(dr["DOC_ID"], dr["DOC_DATE"].ToDate().Date);
                    List <IGrouping <object, DataRow> > entityDColl = groupDt.Where(c => c.Key.Equals(dr["MO_RECEIPT_REQUISTION_ID"])).ToList();
                    foreach (IGrouping <object, DataRow> groupDColl in entityDColl)
                    {
                        foreach (DataRow dr_d in groupDColl)
                        {
                            DependencyObject newEntityD = new DependencyObject(newEntityDColl.ItemDependencyObjectType);
                            AddToEntity(newEntityD, dr_d, dt_d.Columns, true);
                            newEntityDColl.Add(newEntityD);
                        }
                    }
                    //20170428 add by wangyq for P001-170427001  ============begin==========
                    DependencyObject resultObj = resultColl.AddNew();
                    resultObj["doc_no"] = newEntity["DOC_NO"];
                    //20170428 add by wangyq for P001-170427001  ============end==========

                    //20170628 modi by zhangcn for P001-170327001 ===begin===
                    try {
                        SetIgnoreWarningTag();       //忽略警告
                        saveService.Save(newEntity); //希望触发保存校验
                    }
                    finally {
                        ResetIgnoreWarningTag();// 重置警告
                    }
                    //20170628 modi by zhangcn for P001-170327001 ===end===

                    //7.3自动签核
                    efnetSrv.GetFormFlow("MO_RECEIPT_REQUISTION.I01", dr["DOC_ID"], dr["Owner_Org_ROid"],
                                         new List <object>()
                    {
                        dr["MO_RECEIPT_REQUISTION_ID"]
                    });
                }
            }
        }
Пример #2
0
        /// <summary>
        /// 获取下一个单号
        /// </summary>
        /// <param name="documentNumberGenSrv">单号生成服务</param>
        /// <param name="docNo">当前单号,如果传入单号为空,则会调用单号生成服务获取单号</param>
        /// <param name="docID">单据类型</param>
        /// <param name="sequenceDigit">单据类型流水号位数</param>
        /// <param name="date">单据日期</param>
        /// <returns></returns>
        public static string NextNumber(IDocumentNumberGenerateService documentNumberGenSrv, string docNo
                                        , object docID, int sequenceDigit, DateTime date)
        {
            if (docNo == string.Empty)
            {
                docNo = documentNumberGenSrv.NextNumber(docID, date);
            }
            else
            {
                if (docNo.Length > sequenceDigit)
                {
                    docNo = docNo.Substring(0, docNo.Length - sequenceDigit)
                            + (docNo.Substring(docNo.Length - sequenceDigit, sequenceDigit).ToInt32() + 1).ToStringExtension().PadLeft(sequenceDigit, '0');
                }
            }

            return(docNo);
        }
        private string InsertPoArrivalInspection(string receiptNo, DependencyObjectCollection receiptList, List <int> paiSequenceNumber, Dictionary <int, object> docIdDt)
        {
            //获取生成到货检验单基础数据
            DataTable poArrivalInspection = GetInsertPoArrivalInspection(receiptNo, paiSequenceNumber);
            //把查询数据以序号为Key,存入字典中。方便后期直接根据序号拿数据
            Dictionary <int, DataRow> poArrivalDictionary = new Dictionary <int, DataRow>();

            foreach (DataRow item in poArrivalInspection.Rows)
            {
                if (!poArrivalDictionary.ContainsKey(item["SequenceNumber"].ToInt32()))
                {
                    poArrivalDictionary.Add(item["SequenceNumber"].ToInt32(), item);
                }
            }
            //创建生成采购到货检验单缓存临时表
            DataTable poArrivalInspectionInfo = poArrivalInspection.Clone(); //复制表结构

            poArrivalInspectionInfo.TableName = "PO_ARRIVAL_INSPECTION";
            //创建生成采购到货检验单计数单身缓存临时表
            DataTable poArrivalInspectionDInfo = CreatePoArrivalInspectionDInfo();
            //创建生成采购到货检验单计量单身缓存临时表
            DataTable poArrivalInspectionD1Info = CreatePoArrivalInspectionD1Info();
            //创建计数品质检验不良原因缓存临时表
            DataTable defectiveReasonsAiId = CreateDefectiveReasonsAiIdInfo();

            IPrimaryKeyService             keyService              = GetService <IPrimaryKeyService>(TypeKey);                                                     //生成主键服务
            IDocumentNumberGenerateService docNumService           = GetService <IDocumentNumberGenerateService>("PO_ARRIVAL_INSPECTION");                         //自动编号服务
            ICreateInspectionService       createInspectionService = GetService <ICreateInspectionService>("PO_ARRIVAL_INSPECTION");                               //顺序检查服务
            IGenerateOrDeletePurchaseArivalQCResultService generatePurchaseArivalQc = GetService <IGenerateOrDeletePurchaseArivalQCResultService>("PO_QC_RESULT"); //生成/删除采购质检业务信息服务

            IItemQtyConversionService   itemQtyConversionService = GetService <IItemQtyConversionService>(TypeKey);
            ILogOnService               loginService             = GetService <ILogOnService>();
            List <DocmentInfo>          listDocuments            = new List <DocmentInfo>();
            Dictionary <string, string> salesReturnDocNo         = new Dictionary <string, string>(); //记录产生的单号用于批量生成的时候防止重复单号
            const decimal               defaultDecimal           = 0m;
            string resutQcNo = string.Empty;                                                          //返回结果单号

            //循环入参数据,分别给到货检验单、货检验单计数单身、货检验单计量单身身临时表插入数据
            foreach (DependencyObject receiptListItem in receiptList)
            {
                object poArrivalInspectionId = keyService.CreateId(); //主键
                if (poArrivalDictionary.ContainsKey(receiptListItem["seq"].ToInt32()))
                {
                    #region 到货检验单临时表插入数据
                    //获取生单基础数据
                    DataRow dr = poArrivalDictionary[receiptListItem["seq"].ToInt32()];

                    //获取单据性质
                    object docId = Maths.GuidDefaultValue();
                    if (docIdDt.ContainsKey(dr["SequenceNumber"].ToInt32()))
                    {
                        docId = docIdDt[dr["SequenceNumber"].ToInt32()];
                    }
                    if (dr["PURCHASE_TYPE"].ToStringExtension() == "1" || dr["PURCHASE_TYPE"].ToStringExtension() == "5")
                    {
                        dr["CATEGORY"] = "Q1";
                    }
                    else if (dr["PURCHASE_TYPE"].ToStringExtension() == "2" || dr["PURCHASE_TYPE"].ToStringExtension() == "3")
                    {
                        dr["CATEGORY"] = "Q2";
                    }

                    //计算列赋值
                    dr["PO_ARRIVAL_INSPECTION_ID"] = poArrivalInspectionId;                         //主键
                    dr["DOC_ID"]   = docId;                                                         //单据类型
                    dr["DOC_DATE"] = DateTime.Now.Date;                                             //单据日期

                    dr["DOC_NO"] = docNumService.NextNumber(dr["DOC_ID"], dr["DOC_DATE"].ToDate()); //单号
                    if (!salesReturnDocNo.ContainsKey(dr["DOC_NO"].ToString()))
                    {
                        salesReturnDocNo.Add(dr["DOC_NO"].ToString(), dr["DOC_NO"].ToString());
                    }
                    else
                    {
                        string oldDocNo = salesReturnDocNo[dr["DOC_NO"].ToString()]; //取得字典中存储的最大单号
                        string docNo    = NewDocNo(oldDocNo);                        //产生新单号
                        salesReturnDocNo[dr["DOC_NO"].ToString()] = docNo;           //更新字段中单号
                        dr["DOC_NO"] = docNo;                                        //当前笔单号重新赋值
                    }

                    object[] createInspection = createInspectionService.GetInspectionId(dr["ITEM_ID"],
                                                                                        dr["Owner_Org_ROid"],
                                                                                        dr["ITEM_FEATURE_ID"], dr["OPERATION_ID"]);
                    if (!Maths.IsEmpty(createInspection))
                    {
                        dr["INSPECTION_PLAN_ID"] = createInspection[0]; //质检方案ID
                        dr["INSPECTION_TIMES"]   = createInspection[1]; //最大抽样次数
                    }

                    dr["INSPECTION_QTY"]      = receiptListItem["receipt_qty"];                                                                                      //送检数量
                    dr["INSPECTION_DUE_DATE"] = Maths.AddTimeValue(dr["ARRIVAL_DATE"].ToDate(), 1,
                                                                   dr["INSPECT_DAYS"].ToInt32());                                                                    //检验期限
                    dr["INVENTORY_QTY"] = itemQtyConversionService.GetConvertedQty(dr["ITEM_ID"],
                                                                                   dr["INSPECTION_UNIT_ID"], dr["INSPECTION_QTY"].ToDecimal(), dr["STOCK_UNIT_ID"]); //库存单位数量
                    dr["SECOND_QTY"] = itemQtyConversionService.GetConvertedQty(dr["ITEM_ID"], dr["INSPECTION_UNIT_ID"],
                                                                                dr["INSPECTION_QTY"].ToDecimal(), dr["SECOND_UNIT_ID"]);                             //库存单位数量
                    dr["ACCEPTABLE_QTY"]  = receiptListItem["ok_qty"];                                                                                               //送检数量
                    dr["UNQUALIFIED_QTY"] = receiptListItem["unqualified_qty"];                                                                                      //不合格数量
                    dr["DESTROYED_QTY"]   = receiptListItem["checkdestroy_qty"];                                                                                     //破坏数量
                    //判定结果
                    if (receiptListItem["result_type"].ToStringExtension() == "Y")
                    {
                        dr["DECISION"] = "1";
                    }
                    else
                    {
                        dr["DECISION"] = "2";
                    }

                    //后道工序
                    if (!Maths.IsEmpty(dr["MO_ROUTING_D_ID"]))
                    {
                        DependencyObject moRouting = GetMoRouting(dr["MO_ROUTING_D_ID"]);
                        dr["TO_MO_ROUTING_D_ID"] = moRouting["MO_ROUTING_D_ID"];
                        dr["TO_OPERATION_ID"]    = moRouting["OPERATION_ID"];
                    }

                    dr["Owner_Emp"]  = GetEmployeeInfo(loginService.CurrentUserId);
                    dr["Owner_Dept"] = GetAdminUnitInfo(dr["Owner_Emp"]);
                    //系统管理字段
                    AddManagementData(dr, loginService);
                    poArrivalInspectionInfo.Rows.Add(dr.ItemArray);

                    #endregion

                    #region 到货检验单计数单身临时表插入数据

                    DependencyObjectCollection qcList = receiptListItem["qc_list"] as DependencyObjectCollection;
                    if (qcList == null)
                    {
                        continue;                 //不存在qc_list集合数据跳出循环
                    }
                    foreach (var qcListItem in qcList)
                    {
                        if (qcListItem["qc_seq"].ToInt32() == 0)
                        {
                            continue;                                     //序号为0的数据是默认数据只是为了json结构完整插入的,虚无插入E10系统
                        }
                        DataRow qcListDr = poArrivalInspectionDInfo.NewRow();
                        qcListDr["PO_ARRIVAL_INSPECTION_D_ID"] = keyService.CreateId(); //主键
                        qcListDr["ParentId"]           = poArrivalInspectionId;         //父主键
                        qcListDr["SEQUENCE"]           = qcListItem["qc_seq"];
                        qcListDr["DEFECT_CLASS"]       = qcListItem["defect_level"];
                        qcListDr["INSPECTION_QTY"]     = qcListItem["test_qty"];
                        qcListDr["INSPECTION_QQ"]      = qcListItem["return_qty"];
                        qcListDr["INSPECTION_ITEM_ID"] = GetInspectionItem(qcListItem["test_no"], dr["Owner_Org_ROid"]);
                        qcListDr["INSPECTION_AC"]      = qcListItem["acceptable_qty"];
                        qcListDr["INSPECTION_RE"]      = qcListItem["rejected_qty"];
                        if (receiptListItem["result_type"].ToStringExtension() == "Y")
                        {
                            qcListDr["DECISION"] = true;
                        }
                        else
                        {
                            qcListDr["DECISION"] = false;
                        }
                        qcListDr["IMPACT_RESULT"] = true;
                        qcListDr["REMARK"]        = string.Empty;

                        qcListDr["DEFECTIVE_REASONS_ID"] = Maths.GuidDefaultValue();
                        //系统管理字段
                        AddManagementData(qcListDr, loginService);


                        DependencyObjectCollection reasonlist = qcListItem["reason_list"] as DependencyObjectCollection;
                        if (reasonlist == null)
                        {
                            continue;
                        }
                        //defect_qty为0且reason_no为空的数据是默认数据只是为了json结构完整插入的,不需要插入E10系统
                        if (reasonlist.Count == 1 && (!Maths.IsEmpty(reasonlist[0]["reason_no"]) || reasonlist[0]["defect_qty"].ToInt32() != 0))
                        {
                            qcListDr["DEFECTIVE_REASONS_ID"] = GetDefectiveReasonsId(reasonlist[0]["reason_no"].ToStringExtension());
                        }
                        else
                        {
                            //defect_qty为0且reason_no为空的数据是默认数据只是为了json结构完整插入的,不需要插入E10系统
                            if (!Maths.IsEmpty(reasonlist[0]["reason_no"]) || reasonlist[0]["defect_qty"].ToInt32() != 0)
                            {
                                foreach (DependencyObject reasonlistItem in reasonlist)
                                {
                                    DataRow reasonlistDr = defectiveReasonsAiId.NewRow();
                                    reasonlistDr["DEFECTIVE_REASONS_AI_ID"] = keyService.CreateId();               //主键
                                    reasonlistDr["ParentId"]             = qcListDr["PO_ARRIVAL_INSPECTION_D_ID"]; //父主键
                                    reasonlistDr["DEFECTS"]              = reasonlistItem["defect_qty"];
                                    reasonlistDr["REMARK"]               = string.Empty;
                                    reasonlistDr["DEFECTIVE_REASONS_ID"] =
                                        GetDefectiveReasonsId(reasonlistItem["reason_no"].ToStringExtension());
                                    //系统管理字段
                                    AddManagementData(reasonlistDr, loginService);
                                    defectiveReasonsAiId.Rows.Add(reasonlistDr.ItemArray);

                                    //子单身第一笔时把不良原因主键赋值给单身不良原因
                                    if (reasonlist.IndexOf(reasonlistItem) == 0)
                                    {
                                        qcListDr["DEFECTIVE_REASONS_ID"] = reasonlistDr["DEFECTIVE_REASONS_ID"];
                                    }
                                }
                            }
                        }
                        //把对应数据添加至预生单缓存中
                        poArrivalInspectionDInfo.Rows.Add(qcListDr.ItemArray);
                    }

                    #endregion

                    #region 到货检验单计量单身临时表插入数据

                    DependencyObjectCollection collection =
                        createInspectionService.CreateInspection(dr["INSPECTION_PLAN_ID"], dr["OPERATION_ID"]);
                    foreach (DependencyObject item in collection)
                    {
                        if (item["INSPECTION_TYPE"].Equals("VI")) //collection.检验类型=‘VI’
                        {
                            DataRow itemDr = poArrivalInspectionD1Info.NewRow();
                            itemDr["PO_ARRIVAL_INSPECTION_D1_ID"] = keyService.CreateId();
                            itemDr["ParentId"] = poArrivalInspectionId;
                            itemDr["SEQUENCE"] = item["SEQUENCE"]; //检验顺序
                            DependencyObject inspectionPlantD = GetInspectionPlantD(dr["INSPECTION_PLAN_ID"],
                                                                                    item["INSPECTION_ITEM_ID"]);
                            itemDr["DEFECT_CLASS"]         = inspectionPlantD["DEFECT_CLASS"];
                            itemDr["INSPECTION_QTY"]       = defaultDecimal;
                            itemDr["INSPECTION_QQ"]        = defaultDecimal;
                            itemDr["DECISION"]             = false;
                            itemDr["IMPACT_RESULT"]        = inspectionPlantD["IMPACT_RESULT"];
                            itemDr["REMARK"]               = string.Empty;
                            itemDr["INSPECTION_ITEM_ID"]   = item["INSPECTION_ITEM_ID"]; //检验项目
                            itemDr["DEFECTIVE_REASONS_ID"] = Maths.GuidDefaultValue();
                            itemDr["ACCEPTANCE_CONSTANT"]  = defaultDecimal;
                            itemDr["SS"] = defaultDecimal;
                            itemDr["XX"] = defaultDecimal;
                            //系统管理字段
                            AddManagementData(itemDr, loginService);
                            poArrivalInspectionD1Info.Rows.Add(itemDr.ItemArray);
                        }
                    }

                    #endregion

                    //记录单据信息
                    DocmentInfo docmentInfo = new DocmentInfo();
                    docmentInfo.Id         = dr["PO_ARRIVAL_INSPECTION_ID"];
                    docmentInfo.OwnerOrgId = dr["Owner_Org_ROid"];
                    docmentInfo.DocId      = dr["DOC_ID"];
                    docmentInfo.DocNo      = dr["DOC_NO"].ToStringExtension();
                    listDocuments.Add(docmentInfo);

                    if (Maths.IsEmpty(resutQcNo))
                    {
                        resutQcNo = dr["DOC_NO"].ToStringExtension();
                    }
                    else
                    {
                        resutQcNo += "," + dr["DOC_NO"].ToStringExtension();
                    }
                }
            }
            #region 将数据统一插入数据库中

            using (ITransactionService trans = GetService <ITransactionService>()) {
                IQueryService querySrv = GetService <IQueryService>();
                //生成采购到货检验单
                if (poArrivalInspectionInfo.Rows.Count > 0)
                {
                    poArrivalInspectionInfo.Columns.Remove("SequenceNumber");
                    poArrivalInspectionInfo.Columns.Remove("ARRIVAL_DATE");
                    poArrivalInspectionInfo.Columns.Remove("INSPECT_DAYS");
                    poArrivalInspectionInfo.Columns.Remove("STOCK_UNIT_ID");
                    poArrivalInspectionInfo.Columns.Remove("SECOND_UNIT_ID");
                    poArrivalInspectionInfo.Columns.Remove("PURCHASE_TYPE");
                    BulkCopyAll(poArrivalInspectionInfo, querySrv);
                }
                //生成采购到货检验单计数单身
                if (poArrivalInspectionDInfo.Rows.Count > 0)
                {
                    BulkCopyAll(poArrivalInspectionDInfo, querySrv);
                }
                //生成采购到货检验单计量单身
                if (poArrivalInspectionD1Info.Rows.Count > 0)
                {
                    BulkCopyAll(poArrivalInspectionD1Info, querySrv);
                }
                //生成计数品质检验不良原因
                if (defectiveReasonsAiId.Rows.Count > 0)
                {
                    BulkCopyAll(defectiveReasonsAiId, querySrv);
                }

                //EFNET签核
                var infos = listDocuments.GroupBy(c => new { DOC_ID = c.DocId, OwnerOrgID = c.OwnerOrgId });
                foreach (var item in infos)
                {
                    IEFNETStatusStatusService efnetSrv = GetService <IEFNETStatusStatusService>();
                    efnetSrv.GetFormFlow("PO_ARRIVAL_INSPECTION.I01", item.Key.DOC_ID, item.Key.OwnerOrgID,
                                         item.Select(c => c.Id).ToArray());
                }

                //保存单据
                IReadService readSrv  = GetService <IReadService>("PO_ARRIVAL_INSPECTION");
                object[]     entities = readSrv.Read(listDocuments.Select(c => c.Id).Distinct().ToArray());
                if (entities != null && entities.Length > 0)
                {
                    ISaveService saveSrv = GetService <ISaveService>("PO_ARRIVAL_INSPECTION");
                    saveSrv.Save(entities);
                }

                trans.Complete();
            }

            #endregion
            return(resutQcNo);
        }