private static IDevice CreateChannel(IDDK ddk, string name, UnitConversion.PhysUnitEnum unit)
{
ITypeInt typeSignal = ddk.CreateInt(0, 1000);
typeSignal.Unit = UnitConversionEx.PhysUnitName(unit);
IChannel result = ddk.CreateChannel(name, "Detector channel", typeSignal);
return(result);
}
/// Create our Chromeleon symbols
internal IChannel OnCreate(IDDK cmDDK, IDevice master, string name)
{
// Create a data type for our signal
ITypeDouble tSignal = cmDDK.CreateDouble(-100.0, 100.0, 1);
tSignal.Unit = "mV";
// Create the channel symbol
m_MyCmDevice = cmDDK.CreateChannel(name, "Channel that can generate both sinus curve and sawtooth signal as Int64 data points.", tSignal);
// We will be a subdevice of the master device
m_MyCmDevice.SetOwner(master);
// Attach our handlers to the AcquisitionOffCommand and AcquisitionOnCommand of the channel
m_MyCmDevice.AcquisitionOffCommand.OnCommand += new CommandEventHandler(OnAcqOff);
m_MyCmDevice.AcquisitionOnCommand.OnCommand += new CommandEventHandler(OnAcqOn);
m_MyCmDevice.OnDataFinished += new DataFinishedEventHandler(m_MyCmDevice_OnDataFinished);
// These two parameters are not longer relevant when using the new UpdateDataEx function
// in contradiction to the old UpdateData interface. So leave these parameters unchanged;
// the DDK will initialize them appropriately.
m_MyCmDevice.TimeStepFactorProperty.Writeable = false;
m_MyCmDevice.TimeStepDivisorProperty.Writeable = false;
ITypeDouble tRateType = cmDDK.CreateDouble(0.1, 1000.0, 1);
tRateType.Unit = "Hz";
m_RateProperty = m_MyCmDevice.CreateProperty("FixedRate", "The data collection rate in Hz.", tRateType);
m_RateProperty.OnSetProperty += new SetPropertyEventHandler(m_RateProperty_OnSetProperty);
ITypeInt tDataIndexType = cmDDK.CreateInt(0, int.MaxValue);
m_DataIndexProperty =
m_MyCmDevice.CreateProperty("TotalDataPoints", "Total number of data points.", tDataIndexType);
ICommand noMoreDataCommand = m_MyCmDevice.CreateCommand("NoMoreData", "Send IChannel.NoMoreData to stop data acquisition immediately.");
noMoreDataCommand.OnCommand += new CommandEventHandler(noMoreDataCommand_OnCommand);
ITypeDouble tChannelTimeType = cmDDK.CreateDouble(0, 1000, 3);
tChannelTimeType.Unit = "min";
m_ChannelTimeProperty =
m_MyCmDevice.CreateProperty("ChannelTime", "Internal time of the channel.", tChannelTimeType);
// This channel doesn't have peaks, we don't want to have it integrated.
m_MyCmDevice.NeedsIntegration = false;
return(m_MyCmDevice);
}
/// Create our Chromeleon symbols
internal IChannel Create(IDDK cmDDK, string name)
{
// Create a data type for our signal
ITypeInt tSignal = cmDDK.CreateInt(-100, 100);
tSignal.Unit = "mV";
// Create the channel symbol
m_MyCmDevice = cmDDK.CreateChannel(name, "This is a channel that can generate a sinus curve.", tSignal);
// Attach our handlers to the AcquisitionOffCommand and AcquisitionOnCommand of the channel
m_MyCmDevice.AcquisitionOffCommand.OnCommand += new CommandEventHandler(OnAcqOff);
m_MyCmDevice.AcquisitionOnCommand.OnCommand += new CommandEventHandler(OnAcqOn);
m_MyCmDevice.TimeStepFactorProperty.DataType.Minimum = 100;
m_MyCmDevice.TimeStepFactorProperty.DataType.Maximum = 100;
m_MyCmDevice.TimeStepFactorProperty.Writeable = false;
m_MyCmDevice.TimeStepDivisorProperty.DataType.Minimum = 1;
m_MyCmDevice.TimeStepDivisorProperty.DataType.Maximum = 100;
m_MyCmDevice.TimeStepDivisorProperty.OnSetProperty += new SetPropertyEventHandler(OnTimeStepDivisor);
ITypeDouble tWavelength = cmDDK.CreateDouble(200, 400, 1);
tWavelength.Unit = "nm";
m_WavelengthProperty = m_MyCmDevice.CreateStandardProperty(StandardPropertyID.Wavelength, tWavelength);
// We want to have the wavelength available as a report variable and therefore add it to the channel info.
m_MyCmDevice.AddPropertyToChannelInfo(m_WavelengthProperty);
// What do we actually measure?
m_MyCmDevice.PhysicalQuantity = "MotorCurrent";
// This channel doesn't have peaks, we don't want to have it integrated.
m_MyCmDevice.NeedsIntegration = false;
// Create a command for writing a spectrum
ICommand writeSpectrumCommand = m_MyCmDevice.CreateCommand("WriteSpectrum", "Write a spectrum");
writeSpectrumCommand.OnCommand += new CommandEventHandler(OnWriteSpectrum);
// Create an interface for spectrum writing
m_SpectrumWriter = m_MyCmDevice.CreateSpectrumWriter();
return(m_MyCmDevice);
}
/// <summary>
/// Create our Dionex.Chromeleon.Symbols.IChannel and our Properties and Commands
/// </summary>
/// <param name="cmDDK">The DDK instance</param>
/// <param name="name">The name for our device</param>
/// <returns>our IDevice object</returns>
internal IChannel Create(IDDK cmDDK, string name)
{
ITypeInt tSignal = cmDDK.CreateInt(-1000, 1000);
m_MyCmDevice = cmDDK.CreateChannel(name, "Nelson NCI 900 Channel", tSignal);
m_MyCmDevice.AcquisitionOffCommand.OnCommand += new CommandEventHandler(OnAcqOff);
m_MyCmDevice.AcquisitionOnCommand.OnCommand += new CommandEventHandler(OnAcqOn);
m_MyCmDevice.TimeStepFactorProperty.DataType.Minimum = 100;
m_MyCmDevice.TimeStepFactorProperty.DataType.Maximum = 100;
m_MyCmDevice.TimeStepFactorProperty.Writeable = false;
m_MyCmDevice.TimeStepDivisorProperty.DataType.Minimum = 1;
m_MyCmDevice.TimeStepDivisorProperty.DataType.Maximum = 100;
m_MyCmDevice.TimeStepDivisorProperty.OnSetProperty += new SetPropertyEventHandler(OnTimeStepDivisor);
return(m_MyCmDevice);
}
internal IChannel Create(IDDK cmDDK, string name)
{
// Create a data type for our signal
ITypeInt tSignal = cmDDK.CreateInt(-100, 100);
// Create the channel symbol
m_MyCmDevice = cmDDK.CreateChannel(name, "This is a channel that can generate a sinus curve.", tSignal);
// Attach our handlers to the AcquisitionOffCommand and AcquisitionOnCommand of the channel
m_MyCmDevice.AcquisitionOffCommand.OnCommand += new CommandEventHandler(OnAcqOff);
m_MyCmDevice.AcquisitionOnCommand.OnCommand += new CommandEventHandler(OnAcqOn);
m_MyCmDevice.TimeStepFactorProperty.DataType.Minimum = 1;
m_MyCmDevice.TimeStepFactorProperty.DataType.Maximum = 1;
m_MyCmDevice.TimeStepFactorProperty.Writeable = false;
m_MyCmDevice.TimeStepDivisorProperty.DataType.Minimum = 1;
m_MyCmDevice.TimeStepDivisorProperty.DataType.Maximum = 1;
m_MyCmDevice.TimeStepDivisorProperty.Writeable = false;
m_dcr = m_MyCmDevice.CreateProperty("Data_Collection_Rate", "This is the data collection rate of the device", cmDDK.CreateDouble(0.1, 300.0, 1));
m_dcr.OnPreflightSetProperty += new SetPropertyEventHandler(m_dcr_OnPreflightSetProperty);
m_dcr.OnSetProperty += new SetPropertyEventHandler(m_dcr_OnSetProperty);
ITypeInt dcrModeType = cmDDK.CreateInt(0, 1);
dcrModeType.AddNamedValue("Regular", 0);
dcrModeType.AddNamedValue("Random", 1);
m_dcrmode = m_MyCmDevice.CreateProperty("DCRMode", "Mode in which the data points are sent - regular interval or arbitrary", dcrModeType);
m_dcrmode.OnSetProperty += new SetPropertyEventHandler(m_dcrmode_OnSetProperty);
m_dcrmode.OnPreflightSetProperty += new SetPropertyEventHandler(m_dcrmode_OnPreflightSetProperty);
ITypeInt signalTypeType = cmDDK.CreateInt(0, 1);
signalTypeType.AddNamedValue("SawTooth", 0);
signalTypeType.AddNamedValue("Sinus", 1);
m_signalType = m_MyCmDevice.CreateProperty("SignalType", "The signal type of the simulation mode data - SawTooth or Sinus (frequency 0.1Hz)", signalTypeType);
m_signalType.OnSetProperty += new SetPropertyEventHandler(m_signalType_OnSetProperty);
return(m_MyCmDevice);
}
private static IDevice CreateChannel(IDDK ddk, string name, UnitConversion.PhysUnitEnum unit)
{
if (ddk == null)
{
throw new ArgumentNullException("ddk");
}
if (string.IsNullOrEmpty(name))
{
throw new ArgumentNullException("name");
}
if (unit == UnitConversion.PhysUnitEnum.PhysUnit_Unknown)
{
throw new ArgumentException("The unit mus be specified");
}
ITypeInt typeSignal = ddk.CreateInt(0, 1000);
typeSignal.Unit = UnitConversionEx.PhysUnitName(unit);
IChannel result = ddk.CreateChannel(name, "Detector channel", typeSignal);
return(result);
}
private static IDevice CreateChannel(IDDK ddk, string name, double min, double max, int digits, UnitConversion.PhysUnitEnum unit)
{
if (ddk == null)
{
throw new ArgumentNullException("ddk");
}
if (string.IsNullOrEmpty(name))
{
throw new ArgumentNullException("name");
}
if (unit == UnitConversion.PhysUnitEnum.PhysUnit_Unknown)
{
throw new ArgumentException("The unit mus be specified");
}
ITypeDouble typeSignal = ddk.CreateDouble(min, max, digits);
typeSignal.Unit = UnitConversionEx.PhysUnitName(unit);
IChannel result = ddk.CreateChannel(name, "Pump Pressure Channel", typeSignal);
return(result);
}
internal void Create(IDDK cmDDK, string deviceName)
{
m_DDK = cmDDK;
ITypeInt tSignal = m_DDK.CreateInt(0, 1000);
tSignal.Unit = "mAU";
m_Channel = m_DDK.CreateChannel(deviceName, "Detector device", tSignal);
IStringProperty typeProperty =
m_Channel.CreateProperty("DeviceType",
"The DeviceType property tells us which component we are talking to.",
m_DDK.CreateString(20));
typeProperty.Update("Detector");
m_Channel.AcquisitionOffCommand.OnCommand += new CommandEventHandler(OnAcqOff);
m_Channel.AcquisitionOnCommand.OnCommand += new CommandEventHandler(OnAcqOn);
ITypeDouble tWavelength = m_DDK.CreateDouble(200, 400, 1);
tWavelength.Unit = "nm";
m_WavelengthProperty = m_Channel.CreateStandardProperty(StandardPropertyID.Wavelength, tWavelength);
m_WavelengthProperty.OnSetProperty += new SetPropertyEventHandler(OnSetWaveLength);
// We want to have the wavelength available as a report variable and therefore add it to the channel info.
m_Channel.AddPropertyToChannelInfo(m_WavelengthProperty);
m_WavelengthProperty.Update(m_WaveLength);
// What do we actually measure?
m_Channel.PhysicalQuantity = "Absorbance";
m_Timer.Elapsed += new ElapsedEventHandler(OnTimedEvent);
}
/// Create our Chromeleon symbols
internal IChannel OnCreate(IDDK cmDDK, IDevice master, string name)
{
// Create a data type for our signal
ITypeDouble tSignal = cmDDK.CreateDouble(-100.0, 100.0, 1);
tSignal.Unit = "mV";
// Create the channel symbol
m_MyCmDevice = cmDDK.CreateChannel(name, "This is a channel that can generate a sinus curve.", tSignal);
// We will be a subdevice of the master device
m_MyCmDevice.SetOwner(master);
// Attach our handlers to the AcquisitionOffCommand and AcquisitionOnCommand of the channel
m_MyCmDevice.AcquisitionOffCommand.OnCommand += new CommandEventHandler(OnAcqOff);
m_MyCmDevice.AcquisitionOnCommand.OnCommand += new CommandEventHandler(OnAcqOn);
m_MyCmDevice.OnDataFinished += new DataFinishedEventHandler(m_MyCmDevice_OnDataFinished);
// Usually, TimeStepFactor and TimeStepFactor are read-only properties and the driver updates them.
// In this driver we allow to change these values manually for illustration purposes.
m_MyCmDevice.TimeStepFactorProperty.DataType.Minimum = 1;
m_MyCmDevice.TimeStepFactorProperty.DataType.Maximum = 10000;
m_MyCmDevice.TimeStepFactorProperty.OnSetProperty += new SetPropertyEventHandler(TimeStepFactorProperty_OnSetProperty);
m_MyCmDevice.TimeStepDivisorProperty.DataType.Minimum = 1;
m_MyCmDevice.TimeStepDivisorProperty.DataType.Maximum = 10000;
m_MyCmDevice.TimeStepDivisorProperty.OnSetProperty += new SetPropertyEventHandler(TimeStepDivisorProperty_OnSetProperty);
ITypeDouble tRateType = cmDDK.CreateDouble(0.1, 1000.0, 1);
tRateType.Unit = "Hz";
m_RateProperty = m_MyCmDevice.CreateProperty("FixedRate", "The data collection rate in Hz.", tRateType);
m_RateProperty.OnSetProperty += new SetPropertyEventHandler(m_RateProperty_OnSetProperty);
// We want to have the FixedRate available as a report variable and therefore add it to the channel info.
m_MyCmDevice.AddPropertyToChannelInfo(m_RateProperty);
ITypeInt tDataIndexType = cmDDK.CreateInt(0, int.MaxValue);
m_DataIndexProperty =
m_MyCmDevice.CreateProperty("TotalDataPoints", "Total number of data points.", tDataIndexType);
ICommand noMoreDataCommand = m_MyCmDevice.CreateCommand("NoMoreData", "Send IChannel.NoMoreData to stop data acquisition immediately.");
noMoreDataCommand.OnCommand += new CommandEventHandler(noMoreDataCommand_OnCommand);
ITypeDouble tChannelTimeType = cmDDK.CreateDouble(0, 1000, 3);
tChannelTimeType.Unit = "min";
m_ChannelTimeProperty =
m_MyCmDevice.CreateProperty("ChannelTime", "Internal time of the channel.", tChannelTimeType);
// What do we actually measure?
m_MyCmDevice.PhysicalQuantity = "MotorCurrent";
// This channel doesn't have peaks, we don't want to have it integrated.
m_MyCmDevice.NeedsIntegration = false;
// Create a command for writing a spectrum
ICommand writeSpectrumCommand = m_MyCmDevice.CreateCommand("WriteSpectrum", "Write a spectrum");
writeSpectrumCommand.OnCommand += new CommandEventHandler(OnWriteSpectrum);
// Create an interface for spectrum writing
m_SpectrumWriter = m_MyCmDevice.CreateSpectrumWriter();
return(m_MyCmDevice);
}